
Dr. George E Totten
Current affiliation: Portland State University
Subject: Materials Science
Primary location: United States
Chapter 14—Compressor Lubricants
Published in:Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
Publication date:Not available
High-Speed Quenching of High Carbon Steel
Published in:Materials Performance and Characterization
Publication date:2014-09-19
Vegetable Oils as Quenchants for Steels: Residual Stresses and Dimensional Changes
Published in:Materials Performance and Characterization
Publication date:2014-09-19
Fatigue of Instensive Quenched Steels
Published in:Materials Performance and Characterization
Publication date:2014-09-17
“Reference QuenchProbe”—An Alternative Probe Design for In-Situ Estimation of Cooling Rates, Heat Flux, and Hardenability During Immersion Quenchin...
Published in:Materials Performance and Characterization
Publication date:2014-09-12
Distortion Control: Quenching Apparatus for Hardening Parts: An Overview
Published in:Materials Performance and Characterization
Publication date:2014-05-30
Estimation of Transient Temperature Distribution during Quenching, via a Parabolic Model
Published in:Strojniški vestnik – Journal of Mechanical Engineering
Publication date:2015-02-15
Mechanical Tribology
Published in:Not available
Publication date:2004-04-22Materials, Characterization, and Applications
Automotive Lubricants and Testing
Published in:Not available
Publication date:2012-11-01
Analytical Characterization of Aluminum, Steel, and Superalloys
Published in:Not available
Publication date:2005-10-10
Handbook of Hydraulic Fluid Technology, Second Edition
Published in:Not available
Publication date:2011-10-05
Handbook of Mechanical Alloy Design
Published in:Not available
Publication date:2003-11-21
Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
Published in:Not available
Publication date:2003-06-01
Handbook of Aluminum
Published in:Not available
Publication date:2003-03-27Vol. 1: Physical Metallurgy and Processes
Handbook of Metallurgical Process Design
Published in:Materials Engineering
Publication date:2004-05-25
Handbook of Lubrication and Tribology
Published in:Not available
Publication date:2006-04-06Volume I Application and Maintenance, Second Edition
Lubrication and Maintenance of Industrial Machinery
Published in:Not available
Publication date:2008-10-24Best Practices and Reliability
Surface Modification and Mechanisms
Published in:Not available
Publication date:2004-04-30Friction, Stress, and Reaction Engineering
Handbook of Aluminum
Published in:Not available
Publication date:2003-04-25Volume 2: Alloy Production and Materials Manufacturing
Carburizing and Carbonitriding
Published in:Encyclopedia of Tribology
Publication date:2013-01-01
Boriding
Published in:Encyclopedia of Tribology
Publication date:2013-01-01
Quenching Theory and Technology, Second Edition
Published in:Not available
Publication date:2010-07-19
Hardening of Steels*
Published in:Quenching Theory and Technology, Second Edition
Publication date:2010-07-19
Performance Map Characterization of Hydraulic Fluids
Published in:SAE Technical Paper Series
Publication date:1994-09-01
Review of Testing Methods for Hydraulic Fluid Flammability
Published in:SAE Technical Paper Series
Publication date:1993-09-01
Structure of Carburized Layers With High Wear Resistance
Published in:SAE Technical Paper Series
Publication date:2002-03-19
Surface Modification Design: Carburizing With Atmospheres
Published in:SAE Technical Paper Series
Publication date:2002-03-19
Thickened Water-Glycol Hydraulic Fluids for Use at High Pressures
Published in:SAE Technical Paper Series
Publication date:1992-09-01
Lubrication Applications of Coat Forming Additives
Published in:SAE Technical Paper Series
Publication date:2005-05-11
An Accelerated Carburizing Process
Published in:SAE Technical Paper Series
Publication date:2005-11-22
IFHTSE and you
Published in:Surface Engineering
Publication date:2002-04-28
Encyclopedia of Iron, Steel, and Their Alloys
Published in:Not available
Publication date:2016-01-06
Quenching
Published in:Handbook of Aluminum
Publication date:2003-03-27
Self-Organization During Friction
Published in:Materials Engineering
Publication date:2006-09-18Advanced Surface-Engineered Materials and Systems Design
Physical Properties and Their Determination
Published in:Handbook of Hydraulic Fluid Technology, Second Edition
Publication date:2011-10-05
Emulsions
Published in:Handbook of Hydraulic Fluid Technology, Second Edition
Publication date:2011-10-05
Thermal Spray Technologies: An Overview
Published in:Encyclopedia of Tribology
Publication date:2013-01-01
Modeling and Simulation for Material Selection and Mechanical Design
Published in:Dekker Mechanical Engineering
Publication date:2003-12-02
Nitriding of Stainless Steels
Published in:Metallography Microstructure and Analysis
Publication date:2014-11-11
Gas Quenching
Published in:Quenching Theory and Technology, Second Edition
Publication date:2010-07-19
Quenching of Titanium Alloys
Published in:Quenching Theory and Technology, Second Edition
Publication date:2010-07-19
Performance Map Characterization of Lubricating Oils — Characterization of Gear Lubricants Formulated from Different Base Oils
Published in:SAE Technical Paper Series
Publication date:1993-09-01
The Influence of Different Cooling Media on Properties of Carburized Layers
Published in:SAE Technical Paper Series
Publication date:2002-03-19
Assessment of the Eaton (Vickers) V-104C Vane Pump as an Anttiwear Lubrication Tester
Published in:SAE Technical Paper Series
Publication date:2002-03-19
History And Advances In Tempering Parameter Development
Published in:SAE Technical Paper Series
Publication date:2006-11-21
Review of ASTM D-2882 Hardware Problems and Suggested Solutions
Published in:SAE Technical Paper Series
Publication date:1998-09-14
Hydraulic System Cavitation: A Review
Published in:SAE Technical Paper Series
Publication date:1998-09-14
Strategies for Developing Performance Standards for Alternative Hydraulic Fluids
Published in:SAE Technical Paper Series
Publication date:2000-09-11
Analysis of Common Failure Modes of Axial Piston Pumps
Published in:SAE Technical Paper Series
Publication date:2000-09-11
HYDRAULIC CAVITATION FROM A SONOMATERIALS SCIENCE PERSPECTIVE: A REVIEW
Published in:SAE Technical Paper Series
Publication date:2005-11-22
Water-Glycol Hydraulic Fluid Evaluation by ASTM D 2882: Significant Contributors to Erroneous Results
Published in:SAE Technical Paper Series
Publication date:1996-08-01
IFHTSE Medal 2011: George Totten
Published in:International Heat Treatment and Surface Engineering
Publication date:2011-12-01
Heat-Treated Components: Distortion
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
Chromizing
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
A historical overview of steel tempering parameters
Published in:International Journal of Microstructure and Materials Properties
Publication date:2008-01-01
The effect of nitriding on the toughness and bending resistance of tool steels
Published in:International Journal of Microstructure and Materials Properties
Publication date:2008-01-01
Overview of factors contributing to steel spring performance and failure
Published in:International Journal of Microstructure and Materials Properties
Publication date:2007-01-01
Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties
Published in:Journal of ASTM International
Publication date:2009-01-01
Fast Primary Cooling: Alternative to Lead Baths for High-Carbon Steel Wire Patenting
Published in:Materials Performance and Characterization
Publication date:2012-11-21
Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants
Published in:18th International Federation for Heat Treatment and Surface Engineering
Publication date:2011-08-01
Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties
Published in:Advances in the State of the Art of Fire Testing
Publication date:Not available
Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010
Published in:Testing and Use of Environmentally Acceptable Lubricants
Publication date:2011-10-01
Mathematical Modeling and Simulation of Hardness of Quenched and Tempered Steel
Published in:Metallurgical and Materials Transactions B
Publication date:2015-09-08
Biodegradable Hydraulic Fluids: A Review
Published in:Proceedings of the JFPS International Symposium on Fluid Power
Publication date:1999-01-01
CURRENT NEEDS AND DEVELOPMENTS IN HYDRAULIC FLUID TECHNOLOGIES
Published in:Proceedings of the JFPS International Symposium on Fluid Power
Publication date:2002-01-01
Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants
Published in:18th International Federation for Heat Treatment and Surface Engineering
Publication date:2011-08-01
Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010
Published in:Testing and Use of Environmentally Acceptable Lubricants
Publication date:2011-10-01
Determination of biodiesel oxidation stability of biodiesel B100 with optical spectroscopies of eletronic absorption UV-Visible correlation with Ra...
Published in:SAE Technical Paper Series
Publication date:2010-10-06
Modeling Heat Transfer During Quenching Performance in Commercial Quench Tanks
Published in:SAE Technical Paper Series
Publication date:2006-11-21
Quench Factor Analysis To Quantify Steel Quench Severity And Its Successful Use In Steel Hardness Prediction
Published in:SAE Technical Paper Series
Publication date:2006-11-21
Overview of the Proposed Rexroth High-Pressure Piston Pump Testing Procedure for Hydraulic Fluid Qualification
Published in:SAE Technical Paper Series
Publication date:1998-09-14
Surface Engineered Coatings and Surface Additive Interactions for Boundary Film Formation to Reduce Frictional Losses in the Automotive Industry: A...
Published in:SAE Technical Paper Series
Publication date:2005-05-11
Simulation Of Heat Transfer Properties And Residual Stress Analyses Of Cooling Curves Obtained From Quenching Studies
Published in:SAE Technical Paper Series
Publication date:2005-11-22
Conference report IFHTSE 18th Congress
Published in:International Heat Treatment and Surface Engineering
Publication date:2010-12-01
Overview of distortion and residual stress due to quench processing. Part I: factors affecting quench distortion
Published in:International Journal of Materials and Product Technology
Publication date:2005-01-01
Use of aqueous polymer quenchants for hardening of carbonitrided parts
Published in:International Journal of Materials and Product Technology
Publication date:2005-01-01
Delta Ferrite: Cracking of Steel Fasteners
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
Quench Factor Analysis
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
Tempering Parameter Development
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
High-Carbon Steel Wire: Patenting in Lead Bath
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
Hardening: Practical Aspects
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
Gas Quenching: High-Pressure Process and Equipment Design
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13
Quench System Design: Induction Hardening
Published in:Encyclopedia of Iron, Steel, and Their Alloys
Publication date:2016-01-13What's it about?Quenching systems for induction hardening may utilize various agitation modes including conventional immersion quenching, open spray, and submerged...
Quenching technology: a selected overview of the current state-of-the-art
Published in:Materials Research
Publication date:2005-12-01
Characterization of Coatings Obtained by Boriding Niobizing Treatment of an AISI H13 Steel
Published in:Materials Performance and Characterization
Publication date:2016-07-06
Comparison of vickers V-104C and 20VQ5 vane pump wear rates for various water-glycol hydraulic fluids
Published in:Tribotest
Publication date:2002-06-01
Modeling quenching performance by the kuyucak method
Published in:Materials Science and Engineering A
Publication date:2007-06-01
Oxidation of vegetable oils and its impact on quenching performance
Published in:International Journal of Materials and Product Technology
Publication date:2005-01-01
Microstructural Characterization of Layers Produced by Plasma Nitriding on Austenitic and Superaustenitic Stainless Steel Grades
Published in:Journal of ASTM International
Publication date:2012-01-01
Comparison of Structure and Quenching Performance of Vegetable Oils
Published in:Journal of ASTM International
Publication date:2009-01-01
Effect of the HVOF Deposition Process in the Chemical Composition of Tungsten Carbide Layers with Cobalt or Nickel Binders
Published in:Journal of ASTM International
Publication date:2010-01-01
Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants
Published in:Journal of ASTM International
Publication date:2011-01-01
Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants
Published in:Journal of ASTM International
Publication date:2012-01-01
Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010
Published in:Journal of ASTM International
Publication date:2012-01-01
Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy
Published in:Journal of ASTM International
Publication date:2011-01-01
Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration...
Published in:Journal of ASTM International
Publication date:2009-01-01
Experimental determination of the temperature evolution within the quenchant during immersion quenching in still water
Published in:International Journal of Microstructure and Materials Properties
Publication date:2011-01-01
Heat Transfer Properties of a Series of Oxidized and Unoxidized Vegetable Oils in Comparison with Petroleum Oil-Based Quenchants
Published in:Journal of Materials Engineering and Performance
Publication date:2013-03-19
Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy
Published in:18th International Federation for Heat Treatment and Surface Engineering
Publication date:2011-07-01
Comparison of Structure and Quenching Performance of Vegetable Oils
Published in:Advances in the State of the Art of Fire Testing
Publication date:Not available
Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration...
Published in:Advances in the State of the Art of Fire Testing
Publication date:Not available
Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants
Published in:Testing and Use of Environmentally Acceptable Lubricants
Publication date:2011-09-01
Development of a Standard High-Pressure Hydraulic Piston Pump Test: Status of ASTM D.02.N.07 Piston Pump Task Force Activities
Published in:Proceedings of the JFPS International Symposium on Fluid Power
Publication date:2002-01-01
DEVELOPMENT OF HYDRAULIC PUMP PERFORMANCE STANDARDS: AN OVERVIEW OF CURRENT ACTIVITIES
Published in:Proceedings of the JFPS International Symposium on Fluid Power
Publication date:1999-01-01
Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy
Published in:18th International Federation for Heat Treatment and Surface Engineering
Publication date:2011-07-01
Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants
Published in:Testing and Use of Environmentally Acceptable Lubricants
Publication date:2011-09-01
Effect of the strain-hardening on the wear and corrosion behaviour of a Fe-Mn-Al-C alloy
Published in:International Journal of Microstructure and Materials Properties
Publication date:2012-01-01
Epoxidized Soybean Oil: Evaluation of Oxidative Stabilization and Metal Quenching/Heat Transfer Performance
Published in:Journal of Materials Engineering and Performance
Publication date:2013-04-09
Comparison of Oxidation Stability and Quenchant Cooling Curve Performance of Soybean Oil and Palm Oil
Published in:Journal of Materials Engineering and Performance
Publication date:2013-05-10
Polymer Quenchants
Published in:Encyclopedia of Materials: Science and Technology
Publication date:2005-01-01
Fire Resistance of Industrial Fluids
Published in:Not available
Publication date:1996-01-01
Hydraulic Failure Analysis: Fluids, Components, and System Effects
Published in:Not available
Publication date:2001-01-01
Tribology of Hydraulic Pump Testing
Published in:Not available
Publication date:1997-01-01
Intensive Quenching Systems: Engineering and Design
Published in:Not available
Publication date:2010-01-01
Chapter 8—Hydrocarbons for Chemical and Specialty Uses
Published in:Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
Publication date:Not available
Chapter 21—Mineral Oil Heat Transfer Fluids
Published in:Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
Publication date:Not available
Chapter 22—Non-Lubricating Process Fluids: Steel Quenching Technology
Published in:Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
Publication date:Not available
Chapter 35—Lubrication and Tribology Fundamentals
Published in:Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
Publication date:Not available
Aluminum Quenching Technology: A Review
Published in:Materials Science Forum
Publication date:2000-01-01
Characterization of Layers Produced by Boriding and Boriding-PVD on AISI D2 Tool Steel
Published in:Materials Performance and Characterization
Publication date:2016-07-06
Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed With Niobium
Published in:Materials Performance and Characterization
Publication date:2016-02-26
Influence of Boronizing Treatment on Fe–Mn–Al–Si–C Steel
Published in:Materials Performance and Characterization
Publication date:2016-02-11
Production and Characterization of Boride Coatings on Flame-Sprayed Martensitic Stainless Steel
Published in:Materials Performance and Characterization
Publication date:2016-07-06
Production of Aluminide Layers on Copper and Copper Alloy
Published in:Materials Performance and Characterization
Publication date:2016-07-06
Wear Behavior of a Borided Nickel-Based Self-Fluxing Thermal Spray Coating
Published in:Materials Performance and Characterization
Publication date:2016-07-06
Comparative Impact Behavior of High-C Steel After Conventional Quenching, Tempering, and Austempering
Published in:Materials Performance and Characterization
Publication date:2016-08-26
Influence of Pack Boriding on the Wear and Corrosion Resistance of AISI H13 Steel
Published in:Materials Performance and Characterization
Publication date:2016-12-07
ON VEG OIL METAL QUENCHANTS
Published in:Materials Performance and Characterization
Publication date:2017-06-13What's it about?There is an ongoing interest in the development and use of renewable base stocks to formulate quenchants. The most common criterion of vegetable oi...
Uphill Quenching of Aluminum Alloys
Published in:Materials Performance and Characterization
Publication date:2017-10-03