All Stories

  1. A novel trigeneration system driven by the geothermal and solar sources
  2. Diagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current Analysis
  3. Fault-Tolerant Back-to-Back Converter for Direct-Drive PMSG Wind Turbines Using Direct Torque and Power Control Techniques
  4. Photovoltaic-thermal (PVT) technology: Review and case study
  5. Model-based Unified Technique for Identifying Severities of Stator Inter-turn and Rotor Broken Bar Faults in Squirrel Cage Induction Motors
  6. Thermal Analysis of a Directly Grid-Fed Induction Machine With Floating Neutral Point, Operating Under Unbalanced Voltage Conditions
  7. Open-Circuit Fault Diagnosis and Fault Tolerant Operation of Interleaved DC–DC Boost Converters for Homes and Offices
  8. A Single Observer for Currents Estimation in Sensor’s Fault-Tolerant Control of Induction Motor Drives
  9. Fault-Tolerant LED Lighting Systems Featuring Minimal Loss of Luminous Flux
  10. Bearing Faults Classification Based on Variational Mode Decomposition and Artificial Neural Network
  11. Towards Advanced Diagnosis Recognition for Eccentricities Faults: Application on Induction Motor
  12. On-Line Inter-Turn Short-Circuit Fault Diagnosis in Switched Reluctance Motors
  13. Thermal Analysis of Synchronous Reluctance Machines – A Review
  14. Thermal Analysis of an Induction Motor Subjected to Inter-Turn Short-Circuit Failures in the Stator Windings
  15. Fault-tolerent Control strategy for dc-dc converter in Power Wind conversion System
  16. Practical implementation of H-infinity control for fuel cell-interleaved boost converter
  17. A robust phase-locked loop against fundamental frequency deviations and harmonic distortions
  18. Fault-Tolerant PMSG Direct-Drive Wind Turbines, using Vector Control Techniques with Reduced DC-Link Ratings
  19. Impact of the Fan Design and Rotational Direction on the Thermal Characteristics of Induction Motors
  20. Model Predictive Current Control of Synchronous Reluctance Motors, Including Saturation and Iron Losses
  21. On-Line Stator Fault Diagnosis in Line-Start Permanent Magnet Synchronous Motors
  22. Online Estimation of Aluminum Electrolytic-Capacitor Parameters Using a Modified Prony's Method
  23. Mathematical Modelling and Simulation of a Directly Coupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor
  24. Performance Evaluation of Three Variable Speed AC Motor Drives Under Different Load Profiles
  25. Performance Evaluation of a Hybrid Thermal–Photovoltaic Panel
  26. Fault diagnosis in DC-DC converters using a time-domain analysis of the reference current error
  27. IGBTs and current sensors fault diagnosis in direct-drive PSMG wind turbine systems using adaptive thresholds
  28. Introducing the Filtered Park’s and Filtered Extended Park’s Vector Approach to detect broken rotor bars in induction motors independently from the rotor slots number
  29. A single fault diagnostics approach for power switches, speed sensors and current sensors in regenerative PMSM drives
  30. On-line stator fault diagnosis in switched reluctance motors
  31. Open-circuit fault diagnosis in interleaved DC-DC boost converters and reconfiguration strategy
  32. Bearing fault detection for drivetrains using adaptive filters based wavelet transform
  33. Detection and isolation of open-switch and current sensor faults in PMSM drives, through stator current analysis
  34. On-line estimation of aluminum electrolytic-capacitor parameters using a modified Prony's method
  35. Fault tolerant DC-DC converters in DC microgrids
  36. Unregulated AC-DC power supply under heavy load operation: Simulation and design
  37. A Robust Observer-Based Method for IGBTs and Current Sensors Fault Diagnosis in Voltage-Source Inverters of PMSM Drives
  38. Active and Reactive Power Spectra-Based Detection and Separation of Rotor Faults and Low-Frequency Load Torque Oscillations
  39. Comparing Power Transformer Turn-to-Turn Faults Protection Methods: Negative Sequence Component Versus Space-Vector Algorithms
  40. Guest Editorial Special Issue on Fault Diagnosis of Electric Machines, Power Electronics, and Drives
  41. A new space vector approach to detect stator faults in induction motors
  42. DC-DC converter fault diagnostic in PV system
  43. Development of a cloud-based system for remote monitoring of a PVT panel
  44. Development of an effective MPPT method suitable to a stand-alone, low-cost wind turbine system
  45. New technique for identifying bearing faults in three-phase induction motors
  46. Data-driven approach for dip voltage fault detection and identification based on grid current vector trajectory analysis
  47. Performance of a synchronous reluctance motor drive with a fault-tolerant three-level neutral point clamped inverter
  48. Energy management strategy of a propulsion system with supercapacitors for electric and hybrid vehicles
  49. Performance evaluation of a hybrid thermal-photovoltaic panel
  50. A reliable indicator to detect non-adjacent broken rotor bars severity in induction motors
  51. FDI based on Artificial Neural Network for Low-Voltage-Ride-Through in DFIG-based Wind Turbine
  52. Fault diagnosis in Electrical Systems
  53. Modeling, Simulation and Design of an AC-DC Power Supply
  54. The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel-Cage Induction Motors
  55. A DC motor fault detection, isolation and identification based on a new architecture Artificial Neural Network
  56. Fault Analysis of Three-Level NPC Inverters in Synchronous Reluctance Motor Drives
  57. The Use of a Modified Prony’s Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors
  58. Comparative influence of adjacent and non-adjacent broken rotor bars on the induction motor diagnosis through MCSA and ZSC methods
  59. Performance evaluation of synchronous reluctance motor drives under inverter fault conditions
  60. Power Spectrum-Based Detection of Induction Motor Rotor Faults for Immunity to False Alarms
  61. Thorough investigation of the third current harmonic in delta-connected induction motors suffering from a stator inter-turn fault
  62. The use of the modified Prony's method for rotor speed estimation in squirrel cage induction motors
  63. The use of a modified Prony's method to detect the airgap-eccentricity occurrence in induction motors
  64. Comparing power transformer turn-to-turn faults protection methods: Negative sequence component versus space vector algorithms
  65. Comparative experimental investigation of broken bar fault detectability in induction motors
  66. Welcome message
  67. Open-circuit fault detection and diagnosis in pulse-width modulation voltage source inverters based on novel pole voltage approach
  68. Leakage Inductances Calculation for Power Transformers Interturn Fault Studies
  69. Voltage dip fault detection and identification based on Principal Component Analysis: Application to Wind Energy Conversion System
  70. The Use of a Modified Prony Method to Track the Broken Rotor Bar Characteristic Frequencies and Amplitudes in Three-Phase Induction Motors
  71. Multiple Open-Circuit Faults Diagnosis in Back-to-Back Converters of PMSG Drives for Wind Turbine Systems
  72. Converter Power Loss Analysis in a Fault-Tolerant Permanent-Magnet Synchronous Motor Drive
  73. Current vector trajectory analysis for dip voltage fault detection and identification: Application to wind generator turbine
  74. Dip fault detection and identification for wind conversion energy system
  75. Dip voltage fault detection and identification for wind generator turbine farm based on current vector trajectory analysis
  76. Comparative Experimental Investigation of the Broken Bar Fault Detectability in Induction Motors
  77. Modeling and Implementation of MTPA Control Strategy for SynRM Variable Speed Drives
  78. Fault diagnosis in non-isolated bidirectional half-bridge DC-DC converters
  79. Fault tolerant small wind power system for telecommunications with maximum power extraction
  80. Thermal evaluation of different drive train topologies for electric/hybrid vehicles
  81. Fault diagnosis in unidirectional non-isolated DC-DC converters
  82. A Voltage-Based Approach Without Extra Hardware for Open-Circuit Fault Diagnosis in Closed-Loop PWM AC Regenerative Drives
  83. Open-Circuit Fault Diagnosis in Interleaved DC–DC Converters
  84. The use of a modified Prony's method to track the broken rotor bars characteristic frequencies and amplitudes, in three-phase induction motors
  85. Power control of a small-scale standalone wind turbine for rural and remote areas electrification
  86. Modeling synchronous reluctance motors including saturation, iron losses and mechanical losses
  87. Stator Fault Diagnostics in Squirrel Cage Three-Phase Induction Motor Drives Using the Instantaneous Active and Reactive Power Signature Analyses
  88. A New Diagnostic Technique for Real-Time Diagnosis of Power Converter Faults in Switched Reluctance Motor Drives
  89. A Fault-Tolerant PMSG Drive for Wind Turbine Applications With Minimal Increase of the Hardware Requirements
  90. Induction Motors Broken Rotor Bars Diagnosis Through the Discrete Wavelet Transform of the Instantaneous Reactive Power Signal under Time-varying Load Conditions
  91. Fault-Tolerant PMSG Drive With Reduced DC-Link Ratings for Wind Turbine Applications
  92. A New Approach for Current Sensor Fault Diagnosis in PMSG Drives for Wind Energy Conversion Systems
  93. Induction motors airgap-eccentricity detection through the discrete wavelet transform of the apparent power signal under non-stationary operating conditions
  94. A Fault-Tolerant Direct Controlled PMSG Drive for Wind Energy Conversion Systems
  95. Modular hybrid storage system for renewable energy standalone power supplies
  96. Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications
  97. The use of the stator instantaneous complex apparent impedance signature analysis for discriminating stator winding faults and supply voltage unbalance in three-phase induction motors
  98. A New Algorithm for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Fed PWM Motor Drives by the Reference Current Errors
  99. Fault-tolerant converter for AC drives using vector-based hysteresis current control
  100. Fault-Tolerant Strategy for a Photovoltaic DC--DC Converter
  101. Influence of the positive sequence voltage on the derating of three-phase induction motors under voltage unbalance
  102. Gearbox fault detection by wavelet and spectrum analysis of the induction motor power
  103. Sensor and actuator fault detection and isolation based on artificial neural networks and fuzzy logic applicated on induction motor
  104. Recent advances in fault diagnosis by Park's vector approach
  105. A new diagnostic technique for real-time diagnosis of power converter faults in switched reluctance motor drives
  106. A fault-tolerant PMSG drive for wind turbine applications with minimal increase of the hardware requirements
  107. A Power Loss Measurement Method Applied to Static Power Converters
  108. Modeling and Characterization of Leakage Inductances for Transformer Winding Fault Studies
  109. Fault analysis of dual active bridge converters
  110. Standalone diesel-photovoltaic system with batteries and supercapacitors as energy storage components for telecommunications
  111. Fast fault detection, isolation and reconfiguration in fault-tolerant permanent magnet synchronous motor drives
  112. Efficiency evaluation of fault-tolerant operating strategies applied to three-phase permanent magnet synchronous motor drives
  113. Discriminating rotor cage faults and mechanical load oscillations in three-phase induction motors by the stator instantaneous complex apparent impedance
  114. Development of an On-board unit for the monitoring and management of an electric fleet
  115. A voltage-based approach for open-circuit fault diagnosis in voltage-fed SVM motor drives without extra hardware
  116. A new approach for current sensor fault diagnosis in PMSG drives for wind energy conversion systems
  117. Power Transformers’ Fault Diagnostics by Park’s Vector Approach
  118. Power conditioning supercapacitors in combination with batteries for stand-alone power systems
  119. Simulation and design of a photovoltaic roof for automotive applications
  120. A New Method for Power Converter Fault Diagnosis in SRM Drives
  121. Efficiency Analysis of Drive Train Topologies Applied to Electric/Hybrid Vehicles
  122. Discriminating the Simultaneous Occurrence of Three-Phase Induction Motor Rotor Faults and Mechanical Load Oscillations by the Instantaneous Active and Reactive Power Media Signature Analyses
  123. On-line fault detection of aluminium electrolytic capacitors, in step-down DC–DC converters, using input current and output voltage ripple
  124. Broken rotor bars diagnosis in an induction motor fed from a frequency converter: experimental research
  125. Application of parity space approach in fault detection of DC motors
  126. Application of Park's power components to the differential protection of three-phase transformers
  127. Experimental Analysis of a Standalone Renewable Energy Based Hybrid System
  128. Power Transformers Differential Protection Using the p-q Power Theory
  129. A New Fault Diagnosis Method and a Fault-Tolerant Switching Strategy for Matrix Converters Operating With Optimum Alesina-Venturini Modulation
  130. Extended Park's vector approach-based differential protection of three-phase power transformers
  131. A new methodology for the redesign of a switched reluctance motor winding
  132. Condition monitoring of electrolytic capacitors
  133. A New Approach for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Source Inverters
  134. Power conditioning and energy management in a renewable energy based hybrid system for telecommunications
  135. Control and optimisation of power consumption in Radio Base stations
  136. A genetic algorithm based battery model for Stand Alone Radio Base Stations powering
  137. Single power switch open-circuit fault diagnosis in voltage-fed PWM motor drives by the reference current errors
  138. Multiple open-circuit fault diagnosis in voltage-fed PWM motor drives using the current Park's Vector phase and the currents polarity
  139. Power transformers winding fault diagnosis by the on-load exciting current Extended Park's Vector Approach
  140. Comparison of distinct modulation techniques applied to PMSG drives for wind turbine applications under faulty operating conditions
  141. Analysis and Diagnosis of Open-Circuit Faults in Matrix Converters
  142. Experimental study of the effect of positive sequence voltage on the derating of induction motors under voltage unbalance
  143. Analysis of a railway power system based on four quadrant converters operating under faulty conditions
  144. Power converters analysis in a renewable energy based hybrid system with hydrogen storage
  145. Correction to “A Permeance-Based Transformer Model and Its Application to Winding Interturn Arcing Fault Studies” [Jul 10 1589-1598
  146. Comparison of Different Modulation Strategies Applied to PMSM Drives Under Inverter Fault Conditions
  147. A Very Simple Experimental Technique for Characterising and Diagnosing Electrolytic Capacitors
  148. Efficiency analysis of power converters for urban wind turbine applications
  149. New challenges in power conditioning for telecommunications
  150. Converters fault-diagnosis in PMSG drives for wind turbine applications
  151. Performance analysis of a PMSM drive for hybrid electric vehicles
  152. The role of information logistics and data warehousing in educational facilities asset management
  153. Power transformers behavior under the occurrence of inrush currents and turn-to-turn winding insulation faults
  154. Power converter fault diagnosis in SRM drives based on the DC Bus current analysis
  155. Influence of the positive sequence voltage on the temperature of three-phase induction motors
  156. Grid interface for a wind turbine-fuel cell system
  157. A new approach for real-time multiple open-circuit fault diagnosis in voltage source inverters
  158. A hybrid stand alone power system for telecom applications in minor islands
  159. An Online and Noninvasive Technique for the Condition Monitoring of Capacitors in Boost Converters
  160. Estimating aluminum electrolytic capacitors condition using a low frequency transformer together with a DC power supply
  161. A Permeance-Based Transformer Model and Its Application to Winding Interturn Arcing Fault Studies
  162. Power conditioning of an energy storage system for telecommunications
  163. A novel diagnostic method for single power switch open-circuit faults in voltage-fed PWM motor drives
  164. Simple Experimental Techniques to Characterize Capacitors in a Wide Range of Frequencies and Temperatures
  165. Asset Management of Portuguese Educational Facilities
  166. Hybrid Photovoltaic-Thermal Collectors: A Review
  167. Fuel cell-supercapacitor system for telecommunications
  168. Fuel Cell Systems for Telecommunications
  169. Faulty operation analysis of permanent magnet synchronous generator drives for wind turbine applications
  170. The Use of the Instantaneous-Reactive-Power Signature Analysis for Rotor-Cage-Fault Diagnostics in Three-Phase Induction Motors
  171. The partial average power as a fault diagnostic parameter applied to SRM drives
  172. State condition estimation of aluminum electrolytic capacitors used on the primary side of ATX power supplies
  173. Performance evaluation of DTC-SVM permanent magnet synchronous motor drives under inverter fault conditions
  174. Condition Monitoring of Metallized Polypropylene Film Capacitors in Railway Power Trains
  175. Modulated error voltages for the diagnosis of faults in matrix converters
  176. Using input current and output voltage ripple to estimate the output filter condition of switch mode DC/DC converters
  177. A Simple Offline Technique for Evaluating the Condition of Aluminum–Electrolytic–Capacitors
  178. Photovoltaic DC-DC converter for telecommunications energy systems
  179. Using a simple charge-discharge circuit to estimate capacitors equivalent circuit at their operating conditions
  180. Impact of inverter faults in the overall performance of permanent magnet synchronous motor drives
  181. Fault diagnosis on a pwm rectifier ac drive system with fault tolerance using the average current Park's Vector approach
  182. A new method for the detection and location of faults in matrix converters
  183. Uninterruptible energy production in standalone power systems for telecommunications
  184. Using a sinosoidal PWM to estimate the ESR of Aluminum electrolytic capacitors
  185. Supply current polar chart analysis of SRM drives under normal and faulty operating conditions
  186. An Economic Offline Technique for Estimating the Equivalent Circuit of Aluminum Electrolytic Capacitors
  187. A New Model-Based Technique for the Diagnosis of Rotor Faults in RFOC Induction Motor Drives
  188. Output error voltages - a first method to detect and locate faults in matrix converters
  189. An automatic technique to obtain the equivalent circuit of aluminum electrolytic capacitors
  190. Performance analysis of permanent magnet synchronous motor drives under inverter fault conditions
  191. Thermal evaluation of TEFC three-phase induction motors under different supply frequencies
  192. On-line fault diagnostics in operating three-phase induction motors by the active and reactive power media
  193. Mechanical fault detection in an elevator by remote monitoring
  194. Intermittent turn-to-turn winding faults diagnosis in power transformers by the on-load exciting current Park's Vector Approach
  195. Diagnosis of rotor faults in traction drives for railway applications
  196. A non-invasive technique for fault diagnosis of SMPS
  197. Fault tolerant control strategy of SRM drives
  198. The instantaneous reactive power approach for rotor cage fault diagnosis in induction motor drives
  199. The instantaneous power factor approach for rotor cage faults diagnosis in three-phase induction motors
  200. Thermal Performance of a Three-Phase Induction Motor Under Fault Tolerant Operating Strategies
  201. Remedial Operating Strategies for a 12-Pulse LCI Drive System
  202. Airgap-Eccentricity Fault Diagnosis, in Three-Phase Induction Motors, by the Complex Apparent Power Signature Analysis
  203. The occurrence of faults in permanent magnet synchronous motor drives an its effects on the power supply quality
  204. Airgap eccentricity fault diagnosis, in three-phase induction motors, using the instantaneous power factor signature analysis
  205. Buck Converter Simulation Technique Based on the Fourier Transform
  206. Using DFT to Obtain the Equivalent Circuit of Aluminum Electrolytic Capacitors
  207. PWM inverters for stand-alone single-phase high quality power generation
  208. Fault simulation technique for switch mode power supplies
  209. Using spectral analysis to determine the equivalent circuit of the output filter of DC-DC converters at their operating frequency
  210. Lifetime of Film Capacitors in Single-Phase Regenerative Induction Motor Drives
  211. ESR Estimation Method for DC/DC Converters Through Simplified Regression Models
  212. Using Newton-Raphson Method to Estimate the Condition of Aluminum Electrolytic Capacitors
  213. Rotor Cage Fault Diagnostics in Three-Phase Induction Motors, by the Instantaneous Non-Active Power Signature Analysis
  214. High Power Quality System with Fuel Cell Distributed Generation - Simulation and Tests
  215. An Online Technique for Estimating the Parameters of Passive Components in Non-Isolated DC/DC Converters
  216. Rotor Cage Fault Diagnostics in Three-Phase Induction Motors, by the Instantaneous Phase-Angle Signature Analysis
  217. Fault Indicators for the Diagnosis of Rotor Faults in FOC Induction Motor Drives
  218. The Use of Instantaneous Phase-Angle Signature Analysis for Airgap Eccentricity Diagnosis in Three-Phase Induction Motors
  219. Harmonic Analysis Based on Kalman Filtering and Prony's Method
  220. Parameter Estimation of a DC/DC Buck converter using a continuous time model
  221. A switch mode power supply simulation technique based in laplace transform
  222. Thermal Behavior of a Three-Phase Induction Motor Fed by a Fault-Tolerant Voltage Source Inverter
  223. Diagnosis of rotor faults in direct and indirect FOC induction motor drives
  224. An unified method for estimating the parameters of non-isolated DC/DC converters using continuous time models
  225. Fault-Tolerant Operating Strategies Applied to Three-Phase Induction-Motor Drives
  226. An Experimental Technique for Estimating the ESR and Reactance Intrinsic Values of Aluminum Electrolytic Capacitors
  227. Harmonic and Interharmonic Identification Based on Improved Prony's Method
  228. Diagnosis of Rotor Faults in Closed-Loop Induction Motor Drives
  229. Multiple Reference Frames Theory: A New Method for the Diagnosis of Stator Faults in Three-Phase Induction Motors
  230. Condition monitoring and diagnostics of twelve-pulse LCI drive systems
  231. DSP Implementation of the Multiple Reference Frames Theory for the Diagnosis of Stator Faults in a DTC Induction Motor Drive
  232. Bearing failures diagnosis in three-phase induction motors by extended Park's vector approach
  233. Thermal behaviour of a three-phase induction motor fed by a fault tolerant voltage source inverter
  234. Diagnosis of Stator Inter-Turn Short Circuits in DTC Induction Motor Drives
  235. Use of ESR to predict failure of output filtering capacitors in boost converters
  236. Remedial operating strategies for standard 3-phase induction motor drives
  237. Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach
  238. Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach
  239. The use of an unified diagnostic approach to predict the operating deterioration of three-phase induction motors
  240. Voltage source inverter fault diagnosis in variable speed AC drives, by Park's vector approach
  241. Semi-converter fault diagnosis in DC motor drives, by Park's vector approach
  242. Computer-aided detection of airgap eccentricity in operating three-phase induction motors by Park's vector approach
  243. An ESR Meter for High Frequencies
  244. Asset Management Characterization of the Portuguese Secondary School Buildings
  245. Converter fault diagnosis in variable speed DC drives, by Park's vector approach
  246. Continuous operation performance of faulty induction motor drives
  247. An Experimental Technique for Estimating the Aluminum Electrolytic Capacitor Equivalent Circuit, at High Frequencies
  248. Airgap eccentricity fault diagnosis, in three-phase induction motors, by the complex apparent power signature analysis
  249. Thermal Performance of a Three-Phase Induction Motor Under Fault Tolerant Operating Strategies
  250. Power supply quality analysis in a twelve-pulse LCI drive system under compensated fault-mode operation
  251. Power Supply Harmonic Filter Behaviour in a Twelve-Pulse LCI Drive System Under Power Converter Faults
  252. Performance analysis of three-phase induction motor drives under inverter fault conditions
  253. New developments in the diagnosis of faults in line-connected and direct torque controlled induction motors
  254. DSP implementation of the multiple reference frames theory for the diagnosis of stator faults in a DTC induction motor drive
  255. Analysis of SRM drives behaviour under the occurrence of power converter faults
  256. Voltage source inverter fault diagnosis in variable speed AC drives, by the average current Park's vector approach
  257. Predicting the level of airgap eccentricity in operating three-phase induction motors, by Park's vector approach
  258. Asymmetrical operation of a twelve-pulse LCI drive system with power converter faults
  259. Diagnosis of stator inter-turn short circuits in DTC induction motor drives
  260. Diagnosis of stator, rotor and airgap eccentricity faults in three-phase induction motors based on the multiple reference frames theory
  261. Remedial operating strategies for a twelve-pulse LCI drive system
  262. Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach
  263. Rotor cage fault diagnosis in three-phase induction motors by the total instantaneous power spectral analysis
  264. Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's Vector approach
  265. On-line condition monitoring of kinetic-electronic systems