All Stories

  1. Preparation, thermal and mechanical properties of poly (ether‐imide) composite reinforced with carbon nanotube buckypaper

    Article • Journal of Applied Polymer Science, August 2019, Wiley

    Dr Mirabel C Rezende

  2. Fractographic evaluation of welded joints of PPS/glass fiber thermoplastic composites

    Article • Engineering Failure Analysis, August 2019, Elsevier

    Dr Mirabel C Rezende

  3. The influence of morphology, structure, and weight fraction of magnetic additives on the electromagnetic characteristics of composites

    Article • Journal of Magnetism and Magnetic Materials, August 2019, Elsevier

    Dr Mirabel C Rezende

  4. Highly porous multiwalled carbon nanotube buckypaper using electrospun polyacrylonitrile nanofiber as a sacrificial material

    Article • Heliyon, March 2019, Elsevier

    Dr Mirabel C Rezende

  5. Optimization of Triton X-100 removal and ultrasound probe parameters in the preparation of multiwalled carbon nanotube buckypaper

    Article • Materials & Design, March 2019, Elsevier

    Dr Mirabel C Rezende

  6. Mechanical, electrical, and electromagnetic properties of hybrid graphene/glass fiber/epoxy composite

    Article • Polymers and Polymer Composites, February 2019, SAGE Publications

    Dr Mirabel C Rezende, Kamila Kunrath

  7. Viscoelastic evaluation of epoxy nanocomposite based on carbon nanofiber obtained from electrospinning processing

    Article • Polymer Bulletin, February 2019, Springer Science + Business Media

    Dr Mirabel C Rezende

  8. Reuse of Uncured Carbon Fiber/Epoxy Resin Prepreg Scraps: Mechanical Behavior and Environmental Response

    Article • ACS Sustainable Chemistry & Engineering, December 2018, American Chemical Society (ACS)

    Dr Mirabel C Rezende

  9. Effect of different superficial treatments on structural, morphological and superficial area of Kraft lignin based charcoal

    Article • Vibrational Spectroscopy, November 2018, Elsevier

    Dr Mirabel C Rezende

  10. Effect of fiber orientation on the compressive response of plain weave carbon fiber/epoxy composites submitted to high strain rates

    Article • Composite Structures, November 2018, Elsevier

    Dr Mirabel C Rezende

  11. Fractographic study of welded joints of carbon fiber/PPS composites tested in lap shear

    Article • Engineering Failure Analysis, November 2018, Elsevier

    Dr Mirabel C Rezende

  12. A new use for glassy carbon: Development of LDPE/glassy carbon composites for antistatic packaging applications

    Article • Journal of Applied Polymer Science, October 2018, Wiley

    Larissa Montagna, Dr Mirabel C Rezende

  13. Fractographic study of damage mechanisms in fiber reinforced polymer composites submitted to uniaxial compression

    Article • Engineering Failure Analysis, October 2018, Elsevier

    Dr Mirabel C Rezende

  14. Study of the influence of Carbonyl iron particulate size as an electromagnetic radiation absorbing material in 12.4 to 18 GHz (Ku) Band

    Article • Journal of Microwaves Optoelectronics and Electromagnetic Applications, October 2018, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  15. The influence of morphological and structural aspects of synthetic graphites used in the aerospace area on their electrical and mechanical properties

    Article • Materials Research Express, August 2018, Institute of Physics Publishing

    Dr Mirabel C Rezende

  16. Effect of crystallinity on CF/PPS performance under weather exposure: Moisture, salt fog and UV radiation

    Article • Polymer Degradation and Stability, July 2018, Elsevier

    Dr Mirabel C Rezende

  17. Preparation of nanocellulose from Imperata brasiliensis grass using Taguchi method

    Article • Carbohydrate Polymers, July 2018, Elsevier

    Dr Mirabel C Rezende

  18. Compressive failure of fiber reinforced polymer composites – A fractographic study of the compression failure modes

    Article • Materials Today Communications, June 2018, Elsevier

    Dr Mirabel C Rezende

  19. Multifunctional green nanostructured composites: preparation and characterization

    Article • Materials Research Express, May 2018, Institute of Physics Publishing

    Dr Mirabel C Rezende

  20. Structural, morphological, and thermal characterization of kraft lignin and its charcoals obtained at different heating rates

    Article • Materials Research Express, April 2018, Institute of Physics Publishing

    Dr Mirabel C Rezende

  21. Performance Prediction of Microwave Absorbers Based on POMA/Carbon Black Composites in the Frequency Range of 8.2 to 20 GHz

    Article • Journal of Aerospace Technology and Management, March 2018, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  22. Electromagnetic, morphological and structural characterization of microwave absorbers based on POMA/magnetic filament composites

    Article • Journal of Magnetism and Magnetic Materials, March 2018, Elsevier

    Dr Mirabel C Rezende

  23. Carbon nanofibers obtained from electrospinning process

    Article • Materials Research Express, February 2018, Institute of Physics Publishing

    Dr Mirabel C Rezende

  24. Influence of modified carbon substrate on boron doped ultrananocrystalline diamond deposition

    Article • Materials Research Express, February 2018, Institute of Physics Publishing

    Dr Mirabel C Rezende

  25. Effect of PANI on Thermal, Mechanical and Electromagnetic Properties of HDPE/LLDPE/PANI Composites

    Article • Materials Research, December 2017, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  26. Influence the biotreatments in PHBV/GNS nanocomposites

    Article • IET Nanobiotechnology, November 2017, the Institution of Engineering and Technology (the IET)

    Dr Mirabel C Rezende, Larissa Montagna

  27. Production and Characterization of Activated Carbon Fiber from Textile PAN Fiber

    Article • Journal of Aerospace Technology and Management, October 2017, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  28. Morphological and mechanical analyses of laminates manufactured from randomly positioned carbon fibre/epoxy resin prepreg scraps

    Article • Materials Research Express, October 2017, Institute of Physics Publishing

    Dr Mirabel C Rezende

  29. Influence of the aspect ratio of magnetic metallic additives on the microwave absorbing performance

    Article • Materials Research Express, September 2017, Institute of Physics Publishing

    Dr Mirabel C Rezende

  30. A fractographic study on the effects of hygrothermal conditioning on carbon fiber/epoxy laminates submitted to axial compression

    Article • Engineering Failure Analysis, September 2017, Elsevier

    Dr Mirabel C Rezende

  31. A statistical approach to evaluate the oxidative process of electrospun polyacrylonitrile ultrathin fibers

    Article • Journal of Applied Polymer Science, July 2017, Wiley

    Dr Mirabel C Rezende

  32. Fractographic and rheological characterizations of CF/PP-PE-copolymer composites tested in tensile

    Article • Polímeros, June 2017, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  33. The Influence of Artificial Photodegradation on Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV)/Graphite Nanosheets (GNS) Nanocomposites

    Article • Journal of Polymers and the Environment, June 2017, Springer Science + Business Media

    Dr Mirabel C Rezende

  34. Comparative study of experimental and numerical behaviors of microwave absorbers based on ultrathin Al and Cu films

    Article • Materials Chemistry and Physics, June 2017, Elsevier

    Dr Mirabel C Rezende

  35. Electromagnetic Properties of Multifunctional Composites Based on Glass Fiber Prepreg and Ni/Carbon Fiber Veil

    Article • Journal of Aerospace Technology and Management, April 2017, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  36. Morphological, Electromagnetic, and Absorbing Properties of POMA and PAni/Carbon Black Composites

    Article • Journal of Electronic Materials, April 2017, Springer Science + Business Media

    Dr Mirabel C Rezende

  37. Structural and surface functionality changes in reticulated vitreous carbon produced from poly(furfuryl alcohol) with sodium hydroxide additions

    Article • Applied Surface Science, February 2017, Elsevier

    Dr Mirabel C Rezende

  38. Effect of Graphite Nanosheets on Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

    Article • International Journal of Polymer Science, January 2017, Hindawi Publishing Corporation

    Dr Mirabel C Rezende, Larissa Montagna

  39. Electromagnetic, Morphological, and Electrical Characterization of POMA/Carbon Nanotubes-Based Composites

    Article • Journal of Nanomaterials, January 2017, Hindawi Publishing Corporation

    Dr Mirabel C Rezende

  40. Structural behavior of coal obtained from Kraft lignin at different carbonizing rates

    Article • Materials Today Proceedings, January 2017, Elsevier

    Dr Mirabel C Rezende

  41. Thermal, mechanical and electromagnetic properties of LLDPE/PANI composites

    Article • Polymer Bulletin, November 2016, Springer Science + Business Media

    Dr Mirabel C Rezende

  42. Effect of oxidants and anionic surfactants on the morphology and permittivity of polypyrrole and its blends with epoxy resin

    Article • Polímeros, August 2016, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  43. PPS/carbon fiber laminates

    Article • Materials Research, February 2016, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  44. carbon fiber composites

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Mirabel C Rezende, Sr. Carlos V Opelt

  45. Composite materials and radar absorbing materials

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Mirabel C Rezende

  46. Estudo do comportamento térmico de laminados carbono/epóxi submetidos a múltiplos ciclos térmicos

    Article • Polímeros, January 2016, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  47. stability of emulsions

    Article • Polímeros, December 2015, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  48. Effects of cavity on RCS of cylinder coated with microwaves absorbing material

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  49. Boron-Doped Nanocrystalline Diamond Grown on Reticulated Vitreous Carbon: Morphological, Structural, and Electrochemical Characterizations

    Article • ECS Transactions, April 2015, The Electrochemical Society

    Dr Mirabel C Rezende

  50. Glass fiber/carbon nanotubes/epoxy three-component composites as radar absorbing materials

    Article • Polymer Composites, March 2015, Wiley

    Dr Mirabel C Rezende, Prof. Dr. Sergio Henrique Pezzin

  51. Lightweight structural composites with electromagnetic applications

    Article • January 2015, Elsevier

    Dr Mirabel C Rezende

  52. A Self-Consistent Extrapolation Method for the Complex Permittivity and Permeability Based on Finite Frequency Data

    Article • Journal of Computational Interdisciplinary Sciences, January 2015, PACIS - Panamerican Association for Computational Interdisciplinary Sciences

    Dr Mirabel C Rezende

  53. Accelerated aging effects on carbon fiber PEKK composites manufactured by hot compression molding

    Article • Journal of Thermoplastic Composite Materials, December 2014, SAGE Publications

    Dr Mirabel C Rezende

  54. Synthesis and characterization of polyarylacetylene for use in the monolithic vitreous carbon processing

    Article • Polímeros, October 2014, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  55. Benzoxazine Resin/Carbon Nanotube Nanostructured Composite's Degradation Kinetic

    Article • Journal of Nanoscience and Nanotechnology, July 2014, American Scientific Publishers

    Dr Mirabel C Rezende

  56. Evaluation of a nanostructured microwave absorbent coating applied to a glass fiber/polyphenylene sulfide laminated composite

    Article • Materials Research, February 2014, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  57. Síntese do polipirrol com surfactantes aniônicos visando aplicações como absorvedores de micro-ondas

    Article • Polímeros, January 2014, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  58. The Spectral Behavior of Electromagnetic Radiation Absorbing Material Between 350 and 1500nm

    Article • January 2014, Optical Society of America (OSA)

    Dr Mirabel C Rezende

  59. A Self-Consistent Extrapolation Method for the Complex Permittivity and Permeability Based on Finite Frequency Data

    Article • Journal of Computational Interdisciplinary Sciences, January 2014, PACIS - Panamerican Association for Computational Interdisciplinary Sciences

    Dr Mirabel C Rezende

  60. Fractografia de Compósito Estrutural Aeronáutico Submetido ao Ensaio de Tenacidade à Fratura Interlaminar em Modo II

    Article • Polímeros, January 2014, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  61. Environmental effects on viscoelastic behavior of carbon fiber/PEKK thermoplastic composites

    Article • Journal of Reinforced Plastics and Composites, December 2013, SAGE Publications

    Dr Mirabel C Rezende

  62. Nanostructured composites based on carbon nanotubes and epoxy resin for use as radar absorbing materials

    Article • Materials Research, December 2013, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  63. Application of the Prado-Project Management Maturity Model at a R&D Institution of the Brazilian Federal Government

    Article • Journal of Aerospace Technology and Management, November 2013, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  64. Qualitative Analysis of Induction Process of Anisotropic Structures in Titanium Thin Films

    Article • October 2013, SAE International

    Dr Mirabel C Rezende

  65. Complex permeability and permittivity variation of radar absorbing materials based on MnZn ferrite in microwave frequencies

    Article • Materials Research, October 2013, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  66. Atenuação da radiação incidente em compósito de ferrita de NiZn dopado com magnésio e cobre em epóxi

    Article • Cerâmica, March 2013, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  67. Microwave Absorbing Nanocomposites Composed with and without Polyaniline by Use as Radar Absorbing Structure

    Article • Materials Science Forum, November 2012, Trans Tech Publications

    Dr Mirabel C Rezende

  68. Correlation of microcrack fracture size with fatigue cycling on non-crimp fabric/RTM6 composite in the uniaxial fatigue test

    Article • Composites Part B Engineering, July 2012, Elsevier

    Dr Mirabel C Rezende

  69. Fractografia de compósito estrutural aeronáutico submetido à caracterização de tenacidade à fratura interlaminar em modo I

    Article • Polímeros, January 2012, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  70. Estudo da aplicação da poli(o-metoxianilina) e de seus compósitos com negro de fumo no processamento de absorvedores de micro-ondas

    Article • Polímeros, January 2012, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  71. Reflectivity of hybrid microwave absorbers based on NiZn ferrite and carbon black

    Article • Journal of Aerospace Technology and Management, January 2012, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  72. Indoor radar cross section measurements of single targets

    Article • Journal of Aerospace Technology and Management, January 2012, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  73. Viscosity, pH, and moisture effect in the porosity of poly(furfuryl alcohol)

    Article • Journal of Applied Polymer Science, January 2012, Wiley

    Dr Mirabel C Rezende

  74. Dependence of microwave absorption properties on ferrite volume fraction in MnZn ferrite/rubber radar absorbing materials

    Article • Journal of Magnetism and Magnetic Materials, November 2011, Elsevier

    Dr Mirabel C Rezende

  75. Reduction of the radar cross section of a wind turbine using a microwave absorbing material

    Article • October 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  76. Modified Nicolson-Ross-Weir (NRW) method to retrieve the constitutive parameters of low-loss materials

    Article • October 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  77. Radar absorbing materials based on titanium thin film obtained by sputtering technique

    Article • Journal of Aerospace Technology and Management, January 2011, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  78. Methodology for DSC calibration i nhigh heating rates

    Article • Journal of Aerospace Technology and Management, January 2011, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  79. Experimental measurements and numerical simulation of permittivity and permeability of Teflon in X band

    Article • Journal of Aerospace Technology and Management, January 2011, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  80. Measurements in an Outdoor Facility and Numerical Simulation of the Radar Cross Section of Targets at 10 GHz

    Article • Journal of Aerospace Technology and Management, January 2011, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  81. Dielectric properties of microwave absorbing sheets produced with silicone and polyaniline

    Article • Materials Research, June 2010, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  82. Fractography analysis and fatigue strength of carbon fiber/RTM6 laminates

    Article • Materials Science and Engineering A, June 2010, Elsevier

    Dr Mirabel C Rezende

  83. Processing of high performance composites based on peek by aqueous suspension prepregging

    Article • Materials Research, June 2010, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  84. Carbon fiber non-crimp multi-axial reinforcement and epoxy mono-component system composite: Fatigue behavior

    Article • Procedia Engineering, April 2010, Elsevier

    Dr Mirabel C Rezende

  85. Electrosynthesis of POMA

    Article • January 2010, The Electrochemical Society

    Dr Mirabel C Rezende

  86. Microwave absorbing paints and sheets based on carbonyl iron and polyaniline: measurement and simulation of their properties

    Article • Journal of Aerospace Technology and Management, January 2010, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  87. Complex permeability and permittivity variation of carbonyl iron rubber in the frequency range of 2 to 18 GHz

    Article • Journal of Aerospace Technology and Management, January 2010, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  88. Evaluation of crystallization kinetics of polymer of poly (ether-ketone-ketone) and poly (ether-ether-ketone) by DSC

    Article • Journal of Aerospace Technology and Management, January 2010, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  89. Avaliação dos comportamentos mecânico e térmico de laminados de PPS/fibra de carbono processados em autoclave sob diferentes ciclos de consolidação

    Article • Polímeros, January 2010, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  90. Electromagnetic radiation absorbing paints based on carbonyl iron and polyaniline

    Article • November 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  91. Comparative study of the Teflon®electromagnetic parameters (permittivity and permeability) experimentally obtained and numerically simulated

    Article • November 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  92. Mechanical and morphological characterizations of carbon fiber fabric reinforced epoxy composites used in aeronautical field

    Article • Materials Research, September 2009, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  93. Evaluation by Free Vibration Method of Moisture Absorption Effects in Polyamide/Carbon Fiber Laminates

    Article • Journal of Thermoplastic Composite Materials, August 2009, SAGE Publications

    Dr Mirabel C Rezende

  94. Influence of calcination temperature on the morphology and magnetic properties of Ni–Zn ferrite applied as an electromagnetic energy absorber

    Article • Journal of Alloys and Compounds, August 2009, Elsevier

    Dr Mirabel C Rezende

  95. Fatigue behaviour study on repaired aramid fiber/epoxy composites

    Article • Journal of Aerospace Technology and Management, January 2009, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  96. Radar Cross Section Measurements and Simulations of a Model Airplane in the X-band

    Article • PIERS Online, January 2009, PIERS Enterprise

    Dr Mirabel C Rezende

  97. A Medium Open Range Radar Cross Section Facility in Brazil

    Article • PIERS Online, January 2009, PIERS Enterprise

    Dr Mirabel C Rezende

  98. Comportamento eletromagnético de materiais absorvedores de micro-ondas baseados em hexaferrita de Ca modificada com íons CoTi e dopada com La

    Article • Journal of Aerospace Technology and Management, January 2009, Institute of Aeronautics and Space

    Dr Mirabel C Rezende

  99. Efeito do tratamento térmico na microestrutura, turbostraticidade e superfície de carbono vítreo reticulado analisado por XPS, espalhamento Raman e voltametria cíclica

    Article • Química Nova, January 2009, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  100. Reactive doping of PAni-CSA and its use in microwave absorbing materials

    Article • Polymers for Advanced Technologies, January 2009, Wiley

    Dr Mirabel C Rezende

  101. Hygrothermal Aging Effect on Fatigue Behavior of GLARE

    Article • Journal of Reinforced Plastics and Composites, September 2008, SAGE Publications

    Dr Mirabel C Rezende

  102. Avaliações térmica e reológica da matriz termoplástica PEKK utilizada em compósitos aeronáuticos

    Article • Polímeros, September 2008, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  103. Multilayer radar absorbing material processing by using polymeric nonwoven and conducting polymer

    Article • Materials Research, September 2008, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  104. Hygrotermal effects evaluation using the iosipescu shear test for glare laminates

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, September 2008, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  105. Synthesis of NiCuZn ferrite nanoparticles and microwave absorption characterization

    Article • Materials Science and Engineering B, July 2008, Elsevier

    Dr Mirabel C Rezende

  106. Effect of surface treatment on fatigue behavior of metal/carbon fiber laminates

    Article • Journal of Materials Science, May 2008, Springer Science + Business Media

    Dr Mirabel C Rezende

  107. Ni–Zn nanoferrite for radar-absorbing material

    Article • Journal of Magnetism and Magnetic Materials, May 2008, Elsevier

    Dr Mirabel C Rezende

  108. Hygrothermal effects on quasi-isotropic carbon epoxy laminates with machined and molded edges

    Article • Composites Part B Engineering, April 2008, Elsevier

    Dr Mirabel C Rezende

  109. Evaluation of fatigue behavior on repaired carbon fiber/epoxy composites

    Article • Journal of Materials Science, March 2008, Springer Science + Business Media

    Dr Mirabel C Rezende

  110. Avaliação do ciclo térmico de conformação por compressão de peças em poli(sulfeto de fenileno) reforçado com fibras contínuas de carbono

    Article • Polímeros, March 2008, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  111. Influence of doped polyaniline on the interaction of Pu/PAni blends and on its microwave absorption properties

    Article • Polymers for Advanced Technologies, January 2008, Wiley

    Dr Mirabel C Rezende

  112. Radar Cross Section of Simple and Complex Targets in the C-band: A Comparison between Anechoic Chamber Measurements and Simulations

    Article • PIERS Online, January 2008, PIERS Enterprise

    Dr Mirabel C Rezende

  113. Raman validity for crystallite size La determination on reticulated vitreous carbon with different graphitization index

    Article • Applied Surface Science, November 2007, Elsevier

    Dr Mirabel C Rezende

  114. Influence of Hygrothermal Conditioning on the Elastic Properties of Carall Laminates

    Article • Applied Composite Materials, October 2007, Springer Science + Business Media

    Dr Mirabel C Rezende

  115. Fractografia de Compósitos Estruturais

    Article • Polímeros, September 2007, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  116. Otimização da interface/interfase de compósitos termoplásticos de fibra de carbono/PPS pelo uso do poli(ácido âmico) do tipo BTDA/DDS

    Article • Polímeros, September 2007, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  117. Damping behavior of hygrothermally conditioned carbon fiber/epoxy laminates

    Article • Journal of Applied Polymer Science, August 2007, Wiley

    Dr Mirabel C Rezende

  118. Influence of heat treatment temperature on the morphological and structural aspects of reticulated vitreous carbon used in polyaniline electrosynthesis

    Article • Applied Surface Science, August 2007, Elsevier

    Dr Mirabel C Rezende

  119. Evaluation of hygrothermal effects on the shear properties of Carall composites

    Article • Materials Science and Engineering A, April 2007, Elsevier

    Dr Mirabel C Rezende

  120. Dielectric microwave absorbing material processed by impregnation of carbon fiber fabric with polyaniline

    Article • Materials Research, March 2007, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  121. Hybrid multilayer structures for use as microwave absorbing material

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  122. Radar cross section measurements of complex targets (missile parts) in C-band in anechoic chamber

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  123. Development, characterization and optimization of dielectric radar absorbent materials as flexible sheets for use at X-band

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  124. Fatigue on NC2/RTM6 Composites

    Article • January 2007, Springer Science + Business Media

    Dr Mirabel C Rezende

  125. Implementation of an active noise suppression system in C-band indoor RCS measurements

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  126. Orientation of a support pylon used in radar cross section measurements

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  127. Simulations of the radar cross section of a stealth aircraft

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  128. Simulations of the radar cross section of a generic air-to-air missile coated with radar absorbing materials

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  129. Design of single-layer microwave absorbers using a hybrid algorithm

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  130. Effect of furfuryl alcohol addition on the cure of furfuryl alcohol resin used in the glassy carbon manufacture

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Dr Mirabel C Rezende

  131. Elastic properties of hygrothermally conditioned glare laminate

    Article • International Journal of Engineering Science, January 2007, Elsevier

    Dr Mirabel C Rezende

  132. Antistatic coating and electromagnetic shielding properties of a hybrid material based on polyaniline/organoclay nanocomposite and EPDM rubber

    Article • Synthetic Metals, November 2006, Elsevier

    Dr Mirabel C Rezende

  133. Hygrothermal effects on the shear properties of carbon fiber/epoxy composites

    Article • Journal of Materials Science, November 2006, Springer Science + Business Media

    Dr Mirabel C Rezende

  134. Hygrothermal and Stacking Sequence Effects on Carbon Epoxy Composites with Molded Edges

    Article • Polymer-Plastics Technology and Engineering, October 2006, Taylor & Francis

    Dr Mirabel C Rezende

  135. Structural Carbon/Epoxy Prepregs Properties Comparison by Thermal and Rheological Analyses

    Article • Polymer-Plastics Technology and Engineering, October 2006, Taylor & Francis

    Dr Mirabel C Rezende

  136. Article • Materials Research, September 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  137. Effect of Void Content on the Moisture Absorption in Polymeric Composites

    Article • Polymer-Plastics Technology and Engineering, July 2006, Taylor & Francis

    Dr Mirabel C Rezende

  138. Monitoring of cure kinetic prepreg and cure cycle modeling

    Article • Journal of Materials Science, July 2006, Springer Science + Business Media

    Dr Mirabel C Rezende

  139. Electrochemical reversibility of reticulated vitreous carbon electrodes heat treated at different carbonization temperatures

    Article • Materials Research, June 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  140. Study of crystallization behavior of poly(phenylene sulfide)

    Article • Polímeros, June 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  141. Dynamics of defects and surface structure formation in reticulated vitreous carbon

    Article • Brazilian Journal of Physics, June 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  142. Comparison of tensile strength of different carbon fabric reinforced epoxy composites

    Article • Materials Research, March 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  143. Avaliação da temperatura de transição vítrea de compósitos poliméricos reparados de uso aeronáutico

    Article • Polímeros, March 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  144. Evaluation of Thermal Stability and Glass Transition Temperature of Different Aeronautical Polymeric Composites

    Article • Polymer-Plastics Technology and Engineering, March 2006, Taylor & Francis

    Dr Mirabel C Rezende

  145. Monitoring of Carbon Fiber/Polyamide Composites Processing by Rheological and Thermal Analyses

    Article • Polymer-Plastics Technology and Engineering, February 2006, Taylor & Francis

    Dr Mirabel C Rezende

  146. Reactive processing and evaluation of butadiene–styrene copolymer/polyaniline conductive blends

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Dr Mirabel C Rezende

  147. Influência de diferentes condições higrotérmicas na resistência à tração de compósitos de fibra de carbono/epóxi modificada

    Article • Polímeros, January 2006, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  148. Hygrothermal effects on dynamic mechanical snalysis and fracture behavior of polymeric composites

    Article • Materials Research, September 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  149. Characterization of cure of carbon/epoxy prepreg used in aerospace field

    Article • Materials Research, September 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  150. Evaluation of carbon fiber surface treated by chemical and cold plasma processes

    Article • Materials Research, September 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  151. Microwave Absorbing Coatings Based on a Blend of Nitrile Rubber, EPDM Rubber and Polyaniline

    Article • Polymer Bulletin, August 2005, Springer Science + Business Media

    Dr Mirabel C Rezende

  152. Estabelecimento de ciclo de cura de pré-impregnados aeronáuticos

    Article • Polímeros, July 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  153. Processing and hygrothermal effects on viscoelastic behavior of glass fiber/epoxy composites

    Article • Journal of Materials Science, July 2005, Springer Science + Business Media

    Dr Mirabel C Rezende

  154. Strength of Hygrothermally Conditioned Polymer Composites with Voids

    Article • Journal of Composite Materials, June 2005, SAGE Publications

    Dr Mirabel C Rezende

  155. Critical Void Content for Polymer Composite Laminates

    Article • AIAA Journal, June 2005, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Mirabel C Rezende

  156. Hygrothermal effects on damping behavior of metal/glass fiber/epoxy hybrid composites

    Article • Materials Science and Engineering A, June 2005, Elsevier

    Dr Mirabel C Rezende

  157. Damping behavior of continuous fiber/metal composite materials by the free vibration method

    Article • Composites Part B Engineering, April 2005, Elsevier

    Dr Mirabel C Rezende

  158. Effect of the interfacial adhesion on the tensile and impact properties of carbon fiber reinforced polypropylene matrices

    Article • Materials Research, March 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  159. Influence of aromatic amine hardeners in the cure kinetics of an epoxy resin used in advanced composites

    Article • Materials Research, March 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  160. Evaluation of mechanical properties of four different carbon/epoxy composites used in aeronautical field

    Article • Materials Research, March 2005, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  161. Síntese de um poli (ácido âmico) para aplicação como interfase em compósitos termoplásticos de alto desempenho

    Article • Polímeros, June 2004, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  162. Microwave absorption properties of a conductive thermoplastic blend based on polyaniline

    Article • Polymer Bulletin, February 2004, Springer Science + Business Media

    Dr Mirabel C Rezende

  163. Evaluation of adhesion of continuous fiber–epoxy composite/aluminum laminates

    Article • Journal of Adhesion Science and Technology, January 2004, Taylor & Francis

    Dr Mirabel C Rezende

  164. Mechanical behavior of carbon fiber reinforced polyamide composites

    Article • Composites Science and Technology, October 2003, Elsevier

    Dr Mirabel C Rezende

  165. Avaliação térmica e reológica do ciclo de cura do pré-impregnado de carbono/epóxi

    Article • Polímeros, July 2003, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  166. Influência do condicionamento ambiental na resistência à tração de compósitos de carbono/epóxi reparados

    Article • Polímeros, July 2003, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  167. Quality improvement of photopolimerizable-cement root canal obturation

    Article • June 2003, SPIE

    Dr Mirabel C Rezende

  168. Erosão em compósitos à base de fibras de vidro/kevlar e resina epóxi de uso aeronáutico

    Article • Polímeros, January 2003, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  169. Monitoring of nylon 6,6/carbon fiber composites processing by X-ray diffraction and thermal analysis

    Article • Journal of Applied Polymer Science, October 2002, Wiley

    Dr Mirabel C Rezende

  170. Estudo Reológico de Tintas de Poliuretano Contendo PAni-DBSA Aplicadas como Materiais Absorvedores de Microondas (8-12 GHz)

    Article • Polímeros, October 2002, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  171. Efeito da concentração do catalisador acetilacetonato férrico na cura de poliuretano à base de polibutadieno líquido hidroxilado (PBLH) e diisocianato de isoforona (IPDI)

    Article • Química Nova, May 2002, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  172. Fabrication of glassy carbon spools for utilization in fiber optic gyroscopes

    Article • Carbon, April 2002, Elsevier

    Dr Mirabel C Rezende

  173. Influence of processing time and composition in the microwave absorption of EPDM/PAni blends

    Article • Journal of Applied Polymer Science, February 2002, Wiley

    Dr Mirabel C Rezende

  174. Study of polyamide 6/6 synthesis carried out by interfacial polymerization on carbon fibre

    Article • Polymer International, January 2002, Wiley

    Dr Mirabel C Rezende

  175. Caracterização Mecânica de Compósitos de Poliamida/Fibra de Carbono Via Ensaios de Cisalhamento Interlaminar e de Mecânica da Fratura

    Article • Polímeros, January 2002, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  176. Influence of processing time and composition in the microwave absorption of EPDM/PAni blends

    Article • Journal of Applied Polymer Science, December 2001, Wiley

    Dr Mirabel C Rezende

  177. The influence of porosity on the interlaminar shear strength of carbon/epoxy and carbon/bismaleimide fabric laminates

    Article • Composites Science and Technology, November 2001, Elsevier

    Dr Mirabel C Rezende

  178. Acompanhamento do Processamento de Elastômeros Condutores por Microscopia Eletrônica de Varredura

    Article • Polímeros, September 2001, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  179. Modificação da rugosidade de fibras de carbono por método químico para aplicação em compósitos poliméricos

    Article • Polímeros, June 2001, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  180. Synthesis of Polyamide 6/6 by Interfacial Polycondensation with the Simultaneous Impregnation of Carbon Fibers

    Article • Macromolecules, May 2001, American Chemical Society (ACS)

    Dr Mirabel C Rezende

  181. Microwave properties of EPDM/PAni-DBSA blends

    Article • Synthetic Metals, March 2001, Elsevier

    Dr Mirabel C Rezende

  182. Porosity control in glassy carbon by rheological study of the furfuryl resin

    Article • Carbon, January 2001, Elsevier

    Dr Mirabel C Rezende

  183. Resistência ao Cisalhamento Interlaminar de Compósitos com Resina Epóxi com Diferentes Arranjos das Fibras na Presença de Vazios

    Article • Polímeros, January 2001, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  184. Polímeros condutores intrínsecos e seu potencial em blindagem de radiações eletromagnéticas

    Article • Polímeros, September 2000, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  185. O uso de compósitos estruturais na indústria aeroespacial

    Article • Polímeros, June 2000, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  186. Estudo da influência do diluente reativo PGE na cinética de cura de resina epóxi utilizada em compósitos estruturais

    Article • Química Nova, June 2000, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  187. Hygrothermal effects on the tensile strength of carbon/epoxy laminates with molded edges

    Article • Materials Research, April 2000, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  188. Rheological analysis of the phenolic and furfuryl resins used in the carbon materials processing

    Article • Materials Research, April 2000, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  189. Processamento de laminados de compósitos poliméricos avançados com bordas moldadas

    Article • Polímeros, March 2000, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  190. Processo de obtenção de pré-impregnados poliméricos termoplásticos via moldagem por compressão a quente

    Article • Polímeros, September 1999, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  191. Métodos de estudo da cinética de cura de resinas epóxi

    Article • Polímeros, June 1999, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  192. Estabelecimento de parâmetros reológicos na obtenção de compósitos carbono/fenólica

    Article • Planta Daninha, January 1999, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  193. Carbono polimérico: processamento e aplicação

    Article • Polímeros, December 1998, FapUNIFESP (SciELO)

    Dr Mirabel C Rezende

  194. Analysis of the Efficiency of Radiation Absorbing Material at X-Band by Measurement of RCS of Planes and Cylinder in Open Field

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  195. Electromagnetic signature on scale model of an aircraft

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  196. Radar absorbing material (RAM) and shaping on radar cross section reduction of dihedral corners

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende

  197. The relationship between Mn-Zn ferrites with different iron ion contents and the absorption energy in x-band

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mirabel C Rezende