Contact

All Stories

  1. Investigating the effect of Zr content on electrochemical and tribological properties of newly developed near β-type Ti-alloys (Ti–25Nb-xZr) for biomedical applications

    Article • Journal of Science Advanced Materials and Devices, June 2024, Elsevier

    Pr. FELLAH Mamoun

  2. Improvement of photocatalytic performance and sensitive ultraviolet photodetectors using AC-ZnO/ZC-Ag2O/AZ-CuO multilayers nanocomposite prepared by spin coating method

    Article • Journal of Science Advanced Materials and Devices, March 2024, Elsevier

    Pr. FELLAH Mamoun

  3. Effect of milling time on structural, mechanical and tribological behavior of a newly developed Ti-Ni alloy for biomedical applications

    Article • Materials Today Communications, March 2024, Elsevier

    Pr. FELLAH Mamoun

  4. Effect of Fe content on physical, tribological and photocatalytical properties of Ti-6Al-xFe alloys for biomedical applications

    Article • Tribology International, March 2024, Elsevier

    Pr. FELLAH Mamoun

  5. Structural, optical and photoelectrochemical behavior of facile electrodeposition of organic/inorganic hybrid film

    Article • Optical and Quantum Electronics, February 2024, Springer Science + Business Media

    Professor Gamal A El-Hiti, Pr. FELLAH Mamoun

  6. Effect of milling time on structural, physical and tribological behavior of a newly developed Ti-Nb-Zr alloy for biomedical applications

    Article • Advanced Powder Technology, January 2024, Elsevier

    Professor Gamal A El-Hiti, Pr. FELLAH Mamoun

  7. Properties of MZO/ceramic and MZO/glass thin layers based on the substrate’s quality

    Article • Optical and Quantum Electronics, December 2023, Springer Science + Business Media

    Pr. FELLAH Mamoun

  8. Structural and mechanical evaluation of a new Ti-Nb-Mo alloy produced by high-energy ball milling with variable milling time for biomedical applications

    Article • The International Journal of Advanced Manufacturing Technology, November 2023, Springer Science + Business Media

    Pr. FELLAH Mamoun

  9. Unraveling the role of sintering temperature on physical, structural and tribological characteristics of ball milled Co28Cr6Mo biomaterial based alloy

    Article • Journal of Engineering Research, November 2023, Elsevier

    Pr. FELLAH Mamoun

  10. Investigating the effect of milling time on structural, mechanical and tribological properties of a nanostructured hiped alpha alumina for biomaterial applications

    Article • Arabian Journal of Chemistry, October 2023, Elsevier

    Pr. FELLAH Mamoun

  11. Structural, mechanical and tribological performance of a nano structured biomaterial Co–Cr–Mo alloy synthesized via mechanical alloying

    Article • Journal of Materials Research and Technology, July 2023, Elsevier

    Pr. FELLAH Mamoun

  12. Tribo-mechanical performance and antibacterial activity in (Cu, Zr)-alloyed Ti(Al)N coatings synthesized by reactive magnetron sputtering

    Article • Journal of Materials Science, October 2022, Springer Science + Business Media

    Pr. FELLAH Mamoun

  13. High photocatalytic capacity of porous ceramic-based powder doped with MgO

    Article • Journal of the Korean Ceramic Society, October 2022, Springer Science + Business Media

    Pr. FELLAH Mamoun

  14. Structural, and tribological properties of nanostructured α + β type titanium alloys for total hip

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Pr. FELLAH Mamoun

  15. Experimental investigation of structural, wetting, mechanical and Tribological properties of TiZrN thin films deposited by magnetron sputtering

    Article • Surfaces and Interfaces, December 2021, Elsevier

    Pr. FELLAH Mamoun

  16. Effect of O2 flow rate on the structure, wettability and tribo-mechanical behaviour of Zr-O-N thin films

    Article • Surfaces and Interfaces, October 2021, Elsevier

    Pr. FELLAH Mamoun

  17. Investigating the effect of nitrogen on the structural and tribo-mechanical behavior of vanadium nitride thin films deposited using R.F. magnetron sputtering

    Article • Journal of Materials Science, August 2021, Springer Science + Business Media

    Pr. FELLAH Mamoun

  18. The effect of milling time on the microstructure and mechanical properties of Ti-6Al-4Fe alloys

    Article • Materials Today Communications, June 2021, Elsevier

    Pr. FELLAH Mamoun

  19. Dry Sliding Friction and Wear Behavior of CuZn39Pb2 and AA7075 Under Industrial and Laboratory Conditions

    Article • Journal of Bio- and Tribo-Corrosion, January 2021, Springer Science + Business Media

    Pr. FELLAH Mamoun

  20. Structural, tribological and antibacterial properties of (α + β) based ti-alloys for biomedical applications

    Article • Journal of Materials Research and Technology, November 2020, Elsevier

    Pr. FELLAH Mamoun

  21. Mechanistic pathways of cationic and anionic surfactants sorption by kaolinite in water

    Article • Environmental Science and Pollution Research, October 2020, Springer Science + Business Media

    Pr. FELLAH Mamoun

  22. Prediction of mechanical properties of welded steel X70 pipeline using neural network modelling

    Article • International Journal of Pressure Vessels and Piping, September 2020, Elsevier

    Pr. FELLAH Mamoun

  23. Structural analysis and densification study of the mechanically alloyed Cr50Ni50 powders

    Article • The International Journal of Advanced Manufacturing Technology, June 2020, Springer Science + Business Media

    Pr. FELLAH Mamoun

  24. Assessment and statistical correlation of mechanical properties of double sided single pass submerged arc welded line pipe steel

    Article • Engineering Science and Technology an International Journal, April 2020, Elsevier

    Pr. FELLAH Mamoun

  25. Effect of Sintering Temperature on Mechanical and Tribological Behavior of Ti–Ni Alloy for Biomedical Applications

    Article • January 2020, Springer Science + Business Media

    Pr. FELLAH Mamoun

  26. Investigating the Effect of Sintering Temperature on Structural and Tribological Properties of a Nanostructured Ti–20Nb–13Zr Alloy for Biomedical Applications

    Article • January 2020, Springer Science + Business Media

    Pr. FELLAH Mamoun

  27. Removal of Chromium (VI) from Water onto Activated Carbon by Adsorption in Dynamic Mode

    Article • January 2020, Springer Science + Business Media

    Pr. FELLAH Mamoun

  28. Enhanced structural and tribological performance of nanostructured Ti–15Nb alloy for biomedical applications

    Article • Results in Physics, December 2019, Elsevier

    Pr. FELLAH Mamoun

  29. Preliminary investigation on the bio-tribocorrosion behavior of porous nanostructured β-type titanium based biomedical alloys

    Article • Materials Letters, December 2019, Elsevier

    Pr. FELLAH Mamoun

  30. Microstructural and Mechanical Investigation of WC-TiC-Co Cemented Carbides Obtained by Conventional Powder Metallurgy

    Article • International Journal of Engineering Research in Africa, November 2019, Trans Tech Publications

    Hamidouche Mohamed, Pr. FELLAH Mamoun

  31. Effect of sintering temperature on structure and tribological properties of nanostructured Ti–15Mo alloy for biomedical applications

    Article • Transactions of Nonferrous Metals Society of China, November 2019, Elsevier

    Pr. FELLAH Mamoun

  32. Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications

    Article • Journal of Materials Engineering and Performance, September 2019, Springer Science + Business Media

    Pr. FELLAH Mamoun

  33. Assessment of the Hydrophilic-Hydrophobic Balance of Alumina Oxidized at Different Temperatures via H<sub>2</sub>O and C<sub>4</sub>H<sub>10</sub> Vapor Adsorption

    Article • Defect and Diffusion Forum, September 2019, Trans Tech Publications

    Pr. FELLAH Mamoun

  34. Effect of Thermocyclic Treatment with Different Cooling Rates on the Mechanical Characteristics of 42CD4 Low-Alloy Steel

    Article • Defect and Diffusion Forum, September 2019, Trans Tech Publications

    Pr. FELLAH Mamoun

  35. Rapid and enhanced recovery of poly-dispersed nonionic surfactant (TX-100) from organic mediums using dehydrated and rehydrated kaolin

    Article • Applied Clay Science, September 2019, Elsevier

    Pr. FELLAH Mamoun

  36. Microstructural, Magnetic, and Nanoindentation Studies of the Ball-Milled Ti80Ni20 Alloy

    Article • Journal of Superconductivity and Novel Magnetism, May 2019, Springer Science + Business Media

    Pr. FELLAH Mamoun

  37. Synthesis and structural and mechanical properties of nanobioceramic (α-Al2O3)

    Article • Journal of the Australian Ceramic Society, March 2019, Springer Science + Business Media

    Pr. FELLAH Mamoun

  38. The 5th Annual International Conference on Material Engineering and Application

    Article • IOP Conference Series Materials Science and Engineering, March 2019, Institute of Physics Publishing

    Pr. FELLAH Mamoun

  39. Effect of annealing treatment on the microstructure, mechanical and tribological properties of chromium carbonitride coatings

    Article • Surface and Coatings Technology, February 2019, Elsevier

    Pr. FELLAH Mamoun

  40. The Effect of Milling Time on Structural, Friction and Wear Behavior of Hot Isostatically Pressed Ti–Ni Alloys for Orthopedic Applications

    Article • January 2019, Springer Science + Business Media

    Pr. FELLAH Mamoun

  41. Effect of calcination temperature on friction and wear behavior of α -Alumina (α -Al2 O3 ) for biomedical applications

    Article • International Journal of Applied Ceramic Technology, October 2018, Wiley

    Pr. FELLAH Mamoun

  42. Structural Mechanical and Tribological Behavior of Reactive Sputtered Cr-N and Cr-V-N Films

    Article • Diffusion Foundations, September 2018, Trans Tech Publications

    Ms AISS LINDA LINDA, Pr. FELLAH Mamoun

  43. Elimination of Chromium (VI) by Adsorption onto Natural and/or Modified Kaolinite

    Article • Diffusion Foundations, September 2018, Trans Tech Publications

    Pr. FELLAH Mamoun, naouel hezil

  44. Effect of Liquid Salt Bath Nitrocarburizing on Mechanical Properties of Low-Alloy Sintered Steels

    Article • METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, August 2018, Co. Ltd. Ukrinformnauka

    Pr. FELLAH Mamoun

  45. Preparation and characterisation of diamond-like carbon films prepared by MW ECR/PACVD process deposited on 41Cr–Al–Mo7 nitrided steel

    Article • Transactions of the IMF, April 2018, Taylor & Francis

    Pr. FELLAH Mamoun

  46. Thermal treatment effect on structural and mechanical properties of Cr–C coatings

    Article • Transactions of the IMF, February 2018, Taylor & Francis

    Pr. FELLAH Mamoun

  47. Comportement à l’usure et au frottement de deux biomatériaux AISI 316L et Ti-6Al-7Nb pour prothèse totale de hanche

    Article • Matériaux & Techniques, January 2018, EDP Sciences

    Pr. FELLAH Mamoun

  48. Effect of Zr content on friction and wear behavior of Cr-Zr-N coating system

    Article • International Journal of Applied Ceramic Technology, December 2017, Wiley

    Pr. FELLAH Mamoun

  49. Physical and Tribological Proprieties of RF Sputtered Chromium Zirconium Nitrides Coatings

    Article • Surface Innovations, November 2017, ICE Publishing

    Ms AISS LINDA LINDA, Pr. FELLAH Mamoun

  50. Effect of milling time on sliding friction and wear behavior of hot isostatically pressed titanium alloys Ti-6Al-4X(X=V, Nb Fe) for biomedical applications

    Article • Journal of Tribology, October 2017, ASME International

    Pr. FELLAH Mamoun

  51. Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys

    Article • Acta Metallurgica Sinica (English Letters), September 2017, Springer Science + Business Media

    Pr. FELLAH Mamoun

  52. Characterisation of R.F. magnetron sputtered Cr-N, Cr-Zr-N and Zr-N coatings

    Article • Transactions of the IMF, August 2017, Taylor & Francis

    Pr. FELLAH Mamoun

  53. Structural and mechanical properties of Cr–Zr–N coatings with different Zr content

    Article • Surface Engineering, June 2017, Taylor & Francis

    Pr. FELLAH Mamoun

  54. Advanced Ceramic Processing

    Article • November 2015, IntechOpen

    Pr. FELLAH Mamoun, Adel mohamed

  55. Sliding friction and wear performance of the nano-bioceramic α-Al2O3 prepared by high energy milling

    Article • Tribology International, November 2015, Elsevier

    Pr. FELLAH Mamoun

  56. Comparative Study on Tribological Behavior of Ti-6Al-7Nb and SS AISI 316L Alloys, for Total Hip Prosthesis

    Article • January 2014, Wiley

    Pr. FELLAH Mamoun

  57. Comparative Study on Tribological Behavior of Ti-6Al-7Nb and SS AISI 316L Alloys, for Total Hip Prosthesis

    Article • January 2014, Springer Science + Business Media

    Pr. FELLAH Mamoun

  58. Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis

    Article • Advances in Tribology, January 2014, Hindawi Publishing Corporation

    Pr. FELLAH Mamoun

  59. Tribological behavior of biomaterial for total hip prosthesis

    Article • Matériaux & Techniques, January 2014, EDP Sciences

    Pr. FELLAH Mamoun

  60. Tribological Behavior of Friction Couple: Metal/Ceramic (Used for Head of Total Hip Replacement)

    Article • November 2013, Wiley

    Pr. FELLAH Mamoun

  61. Tribological behaviour of AISI 316L stainless steel for biomedical applications

    Article • Tribology - Materials Surfaces & Interfaces, September 2013, SAGE Publications

    Pr. FELLAH Mamoun

  62. Friction and Wear Behavior of Ti-6Al-7Nb Biomaterial Alloy

    Article • Journal of Biomaterials and Nanobiotechnology, January 2013, Scientific Research Publishing, Inc,

    Pr. FELLAH Mamoun