All Stories

  1. Structural and diffusional phase transformations in liquid-quenched Mg85Y9Zn6 ribbons below the bifurcation temperature
  2. Microstructure Analysis of Graded Interface Layers in a Model Multilayer Al/Al–Zn/Al Sample by Scanning Microbeam Small-Angle X-ray Scattering Measurements
  3. Relation of Size Distribution of Cracks in Superconducting Layer to Critical Current Distribution under Small Voltage Probe Spacing in REBCO-Superconducting Composite Tape
  4. Small-angle scattering tomography of precipitation-hardened multilayer Al/Al-Zn/Al model alloys
  5. Two dimensional anomalous small-angle scattering measurements at the Mg K absorption edge for nanostructure analysis in concentrated Al-Mg alloys
  6. Dependence of Critical Current on Voltage Probe Spacing in Superconducting Tape with Multiple Small Cracks and a Large Crack
  7. Mechanical Properties and Nanostructure of Multi-Layered Al–Zn–Mg Alloy with Compositional Gradient
  8. Further developments of the tender x-ray diffractometer at BL-15A2 of the photon factory
  9. Features of Crack Size Distribution- and Voltage Probe Spacing-Dependences of Critical Current and n-Value in Cracked Superconducting Tape, Depicted by Simulation
  10. The seeds of Zn6Y8 L12-type clusters in amorphous Mg85Zn6Y9 alloy investigated by photoemission spectroscopy
  11. Effects of Crack Size Distribution and Voltage Probe Spacing on Variation of Critical Current and n-Value along the Longitudinal Direction in Superconducting Tape with Cracks
  12. Seeds of L12 clusters in amorphous Mg85Zn6Y9 alloy observed via anomalous X-ray scattering
  13. Transition to long period stacking ordered structures in Mg 85 Gd 9 Zn 6 alloys from amorphous ribbons examined by synchrotron radiation scattering: Comparison with Mg 85 Y 9 Zn 6 alloys
  14. Critical Current and n-Value of Heterogeneously Cracked Superconducting Tapes, Studied by a Monte Carlo Simulation Method Combined with a Model of Current Shunting at Cracks
  15. Effects of Crack Size Distribution and Specimen Length on the Correlation between n-Value and Critical Current in Heterogeneously Cracked Superconducting Tape
  16. Development of microstructures in rapidly-quenched Mg 85 Y 9 Zn 6 alloy ribbons during heating at a constant speed examined by simultaneous small- and wide angle scattering measurements
  17. Realization of two-dimensional anomalous small-angle scattering of Al alloys at the K absorption edge of Al
  18. Relation of Critical Current and n-Value of Local Sections to Those of Sample in a Multi-Filamentary Bi2223 Superconducting Composite Tape with Applied Stress-Induced Cracks
  19. Nanoclusters first: a hierarchical phase transformation in a novel Mg alloy
  20. Stability of Long-Period Stacking Ordered Structures at Elevated Temperatures Examined by Multicolor Synchrotron Radiation X-ray Scattering/Diffraction Measurements
  21. A Trial on Detecting Fluctuations in Bulk Metallic Glass Beams by Strain Contrast Variation Method–Use of High Energy Small-Angle Scattering
  22. Effects of Heterogeneous Cracking of Superconducting Layer on Voltage-Current Curve, Critical Current, and n-Value in High-Temperature Superconducting Layer-Coated Conductor Tape
  23. Relation between n-Value and Critical Current in Filamentary and Coated Superconducting Tapes with Tensile Stress-Induced Cracks
  24. Depth-Dependent Structural Changes in PS-b-P2VP Thin Films Induced by Annealing
  25. Microstructural Evolution of Long-Period Stacking Ordered Structures in Mg97Y2Zn1 Alloys Examined by In-Situ Small-Angle X-ray Scattering
  26. In situ measurements on stability of long-period stacking-ordered structures in Mg85Y9Zn6 alloys during heating examined by multicolor synchrotron radiation small-angle scattering
  27. Normalization of grazing-incidence small angle scattering of phospholipid alloy systems at the K absorption edge of phosphorous: A standard sample approach
  28. Relation of n-Value to Critical Current for Local Sections and Overall Sample in a SmBCO Coated Conductor Pulled in Tension
  29. Tape Length-Dependence of Critical Current and n-Value in Coated Conductor with a Local Crack
  30. Grazing-incidence small-angle X-ray scattering from Ge nanodots self-organized on Si(001) examined with soft X-rays
  31. Fracture behavior and fracture toughness of pitch-based carbon fiber with an artificial notch introduced by a focused ion beam
  32. Development of Microstructures of Long-Period Stacking Ordered Structures in Mg85Y9Zn6 Alloys Annealed at 673 K (400 °C) Examined by Small-Angle X-Ray Scattering
  33. Evolution of long-period stacking ordered structures on annealing as-cast Mg85Y9Zn6 alloy ingot observed by synchrotron radiation small-angle scattering
  34. Estimation of Fracture Toughness of SiC Fiber and Statistical Analysis of Change in Fracture Strength Distribution with Notch Size
  35. Influence of Copper Volume Fraction on Tensile Strain/Stress Tolerances of Critical Current in a Copper-Plated DyBCO-Coated Conductor
  36. A Review on Small- and Wide-Angle X-Ray Scattering Applied to the Precipitation Process in Metallic Alloys
  37. Experimental station for multiscale surface structural analyses of soft-material films at SPring-8 via a GISWAX/GIXD/XR-integrated system
  38. Analysis of the correlation betweenn-value and critical current in bent multifilamentary Bi2223 composite tape based on a damage evolution model
  39. Influences of Electroplated Copper on Tensile Strain and Stress Tolerance of Critical Current in DyBCO-Coated Conductor
  40. Degradation Mechanism of Polycrystalline Silicon Carbide Fiber due to Air-Exposure at High Temperatures
  41. Influences of Cracking of Coated Layer on Critical Current in Coated Composite Superconductor
  42. Relation of Shunting Current at Cracked Part to Critical Current and n-Value in Multifilamentary Bi2223 Composite Tape
  43. Relation of n-value to critical current in bent-damaged Bi2223 composite tape
  44. Contrast matching of an Si substrate with polymer films by anomalous dispersion at the SiKabsorption edge
  45. A Monte Carlo simulation on critical current distribution of bent-damaged multifilamentary Bi2223 composite tape
  46. Change in local and overall V–I curves with applied tensile strain in DyBCO-coated conductor
  47. In situ strain measurements of superconducting composites by depth and layer sensitive X-ray diffraction technique utilizing synchrotron radiation
  48. Local and overall critical current and n-value of DyBCO coated conductor under applied tensile strain
  49. Relation of crack-induced current shunting to transport current and n-value in DyBCO-coated superconductor
  50. Effect of Ewald sphere curvature on the GISAXS analysis of capped Germanium nanodot samples in the soft X-ray region
  51. Analysis of distribution of critical current of bent-damaged Bi2223 composite tape
  52. Multipurpose soft-material SAXS/WAXS/GISAXS beamline at SPring-8
  53. Near-surface relaxation structure of annealed block copolymer film on Si substrates examined by grazing-incidence small-angle scattering utilizing soft X-rays
  54. Upgrade of the small angle X-ray scattering beamlines at the Photon Factory
  55. A grazing incidence small-angle x-ray scattering analysis on capped Ge nanodots in layer structures
  56. Fracture behavior of coated layer and its influence on critical current of DyBCO coated conductor
  57. Influence of tensile damage on V–I curve and critical current of DyBCO coated conductor
  58. Modeling analysis of irreversible bending strain distribution and critical current distribution at low bending strains of Bi2223-composite tape
  59. Simulation for prediction of distribution of critical current among specimens under low applied bending strains near the average irreversible strain in Bi2223 composite tape
  60. Nano-quasicrystal formation in Zr75Cu20Pt5Glass Ribbons during Annealing Examined by in-situ SWAXS
  61. Influences of cracking of coated superconducting layer on voltage-current curve, critical current, and n-value in DyBCO-coated conductor pulled in tension
  62. Fracture toughness of Al2O3 fibers with an artificial notch introduced by a focused-ion-beam
  63. Prediction of variation in critical current with applied tensile/bending strain of Bi2223 composite tape from tensile stress-strain curve
  64. Realization of a High-Performance Point-Focusing Monochromator for X-ray Studies
  65. Applicability of Weibull Distribution to Description of Distributed Normalized Critical Current of Bent-Damaged Bi2223 Composite Tape
  66. Change of Young’s Modulus with Increasing Applied Tensile Strain in Open Cell Nickel and Copper Foams
  67. Tensile Deformation and Failure Behavior of Open Cell Nickel and Copper Foams
  68. Microstructure analysis using SAXS/USAXS techniques
  69. Analysis of critical current distribution of bent Bi2223 composite tapes by unifying parameter approach and its application to the description of average critical current–bending strain relation near the average irreversible strain
  70. Anomalous Grazing Incidence Small-Angle Scattering of Capped Ge Nanodots at the Si K Absorption Edge
  71. Distribution of normalized critical current of bent multifilamentary Bi2223 composite tape
  72. Critical current of laminated and non-laminated BSCCO superconducting composite tape under bending strain
  73. Fracture and flaking off behavior of coated layer of DyBCO coated conductor under applied tensile strain
  74. Prediction of critical current–bending strain relation of Bi2223 composite tape using residual strain of filaments, load–strain curve and geometry of cross-section
  75. Statistical analysis of the distribution of critical current and the correlation ofnvalue to the critical current of bent Bi2223 composite tape
  76. Effect of reflected waves on the GISAXS analysis of as-grown capped Ge nanodots
  77. Synchrotron investigation on the sheared structure evolution of syndiotactic polypropylene crystallization process
  78. Simulation on the relation of distribution of overall critical transport current to that of local one in bent-damaged Bi2223 superconducting composite tape
  79. Influence of the Crack Spacing in the Coating Layer on the Progress of Interfacial Debonding in Galvannealed Steel Pulled in Tension
  80. Horizontally and Vertically Aligned Polymeric Nanosheets: CO2-Induced Morphological Changes of Block Copolymer Thin Films
  81. Change of theV–Icurve and critical current with applied tensile strain due to cracking of filaments in Bi2223 composite tape
  82. Estimation of Young’s modulus, residual strain and intrinsic fracture strain of Bi2212 filaments in Bi2212/Ag/Ag alloy composite wire
  83. Modeling analysis of distribution of irreversible bending strain for critical current in Bi2223-composite tape
  84. The influence of tensile strain to critical current of Bi2223 composite tape
  85. Time‐Resolved Synchrotron SAXS Observations on Sheared Syndiotactic Poly(propylene) Crystallization Process
  86. Direct measurement of difference in local deformation and its influence on critical current in Bi2223/Ag/Ag alloy composite tape
  87. Residual stresses in YAG phase in directionally solidified eutectic Al2O3/YAG ceramic composite estimated by X-ray diffraction
  88. Residual stresses in YAG phase of melt growth Al2O3/YAG eutectic composite estimated by indentation fracture test and finite element analysis
  89. Residual and fracture strains of Bi2223 filaments and their relation to critical current under applied bending and tensile strains in Bi2223∕Ag∕Ag alloy composite superconductor
  90. Anomalous small-angle scattering from nanoquasicrystalline precipitates in Zr80Pt20ribbons
  91. Point-focusing monochromator crystal realized by hot plastic deformation of a Ge wafer
  92. Analysis of the residual strain change of Bi2212, Ag alloy and Ag during the heating and cooling process in Bi2212/Ag/Ag alloy composite wire
  93. Thermally and mechanically induced residual strain and strain tolerance of critical current in stainless steel-laminated Bi2223/Ag/Ag alloy composite superconductors
  94. Assessment of strain of Bi2223 filaments in bent Ag-sheathed superconducting composites by synchrotron radiation
  95. Analysis of the distribution of critical current of bent Bi2223 composite tape based on a unifying parameter approach
  96. Correlation between local and overall critical current of bent multifilamentary Bi2223/Ag tape
  97. Local and overall critical current of Bi2223-composite tape under applied tensile and bending strains
  98. Statistical analysis of scatter in critical current of bent superconducting Bi2223 composite tape
  99. Modeling analysis of the critical current of bent Bi2223 composite tape based on the damage strain parameter and the shape of the core
  100. Grazing incident small angle x-ray scattering study of polymer thin films with embedded ordered nanometer cells
  101. Sample-length dependence of the critical current of slightly and significantly bent-damaged Bi2223 superconducting composite tape
  102. In situ investigation of annealing effect on lamellar stacking structure of polyethylene thin films by synchrotron grazing-incidence small-angle and wide-angle X-ray scattering
  103. Precursory microstructures in Zr–Cu–Al–Ni bulk metallic glasses examined by anomalous small-angle scattering at the Zr K edge
  104. Analytical modeling of stress–strain behavior at 1873K of alumina/YAG composite compressed parallel and perpendicular to the solidification direction
  105. Thermally induced residual strain accumulation in Bi2223/Ag/Ag alloy composite superconductor
  106. Anomalous SWAXS Analysis of Zr-Cu-Ni-Al Quaternary Metallic Glass Joints
  107. Analysis of Buckling and Interfacial Debonding of Galvannealed Coating Layer on Steel Substrates under Applied Tensile Strain
  108. Crack Spacing Distribution in Coating Layer of Galvannealed Steel under Applied Tensile Strain
  109. Degradation Mechanism of Amorphous Silicon Carbide Fiber due to Air-Exposure at High Temperatures
  110. Estimation of Critical Current of Bent Bi2223 Composite Tape by Application of Superconducting Core Shape-Incorporated Model
  111. Relation of Distribution of Local Critical Current to Overall Critical Current in Bi2223 Superconducting Composite Tape Damaged by Bending
  112. In situ synchrotron-radiation measurements of axial strain in laminated Bi2223 superconducting composite tapes at room temperature
  113. Monte Carlo-shear lag simulation for fracture behavior of Bi2223 superconducting monofilament and its influence on critical current
  114. Variation of local critical current and its influence on overall current of bent multifilamentary Bi2223/Ag tape
  115. Distribution of local critical current along sample length and its relation to overall current in a long Bi2223/Ag superconducting composite tape
  116. Fracture Toughness of a Crystalline Silicon Carbide Fiber (Tyranno-SA3R)
  117. Nanoscopic fluctuation in quenched Zr–Cu–Ni–Al metallic glasses and their welds examined by ASAXS at Zr–K edge
  118. Si wafers having one- and two-dimensionally curved (111) planes examined by X-ray diffraction
  119. A Monte Carlo–shear lag simulation of tensile fracture behaviour of Bi2223 filament
  120. Microstructure of a Metallic Glass Joint Welded by Electron Beam Examined by Anomalous Small-Angle Scattering at Zr K Edge
  121. Multiple-cracking phenomenon of the galvannealed coating layer on steels under thermal and tensile stresses
  122. A Monte Carlo Simulation on the PFZ Microstructures in Al-Based Alloys during Multistep Annealing
  123. A Monte Carlo Simulation on the PFZ Microstructures in Al-Based Alloys during Multistep Annealing
  124. Scanning Anomalous Small-Angle Scattering as a Tool to Examine Welded Bulk Glass
  125. Application of Grazing-Incidence Small-Angle X-Ray Scattering Technique to Semiconducting Composite Materials
  126. An attempt to recover strength of oxidized SiC/SiC composite by means of a deoxidation treatment
  127. Fracture and debonding behavior of coated brittle alumina layer on ductile aluminum substrate wire
  128. Fracture characteristics of Al2O3/YAG composite at room temperature to 2023K
  129. Simulation of fracture behavior of unidirectional SiC/SiC composite exposed in air at 823–1673 K
  130. Rational development of new materials — putting the cart before the horse?
  131. In situ strain measurements of Bi2223 superconducting filaments in multifilamentary Ag-sheathed Bi2223 superconducting tapes
  132. Damage evolution under bending and tensile stress and its influence on critical current of Bi2223/Ag superconducting composite tape
  133. Improvement of Young's modulus and tensile strength of polymer impregnation and pyrolysis processed SiC/SiC composite by improved continuity of matrix
  134. A Monte Carlo Simulation on the Microstructures near Precipitation-Free Zones Accompanied by Grain Boundary Precipitation
  135. Computer Aided Phase Diagram Assessment and Its Extension to Materials Design
  136. Degradation of SiC/SiC composite due to exposure at high temperatures in vacuum in comparison with that in air
  137. Nondimensional simulation of tensile behavior of UD microcomposite under energy release rate and shear stress criteria for interfacial debonding
  138. Residual strength of PIP-processed SiC/SiC single-tow minicomposite exposed at high temperatures in air as a function of exposure temperature and time
  139. Tensile and Bending Fracture Behaviors and Their Influence on Critical Current of Multifilamentary Bi2223/Ag/Ag-Mg Composite Tape
  140. The Effects of Solute and Vacancy Depletion on the Formation of Precipitation-Free Zone in a Model Binary Alloy Examined by a Monte Carlo Simulation
  141. Fatigue-damage evolution and damage-induced reduction of critical current of a Nb3Al superconducting composite
  142. Tensile damage and its influence on the critical current of Bi2223/Ag superconducting composite tape
  143. Phase Separation Structure Near the Surface in Al-Ag Binary Alloys
  144. Fracture of filaments and its influence on critical current and residual strength of fatigued Nb–Ti/Cu superconducting composite
  145. Grazing-incidence small-angle scattering measurement of Ge islands capped with a Si layer
  146. Structures of submonatomic Sn layers in Fe/Cr(Sn)Cr magnetic multilayers determined by anomalous x-ray scattering measurements
  147. Development of microstructural anisotropy during aging with deformation of Al–Ag alloys
  148. Oscillatory Resonant X-Ray Magnetic Bragg-Peak Signs and Gd Moments Induced by the Fe/Gd Interlayer Exchange Interaction
  149. Time-resolved two-dimensional small-angle scattering of Guinier–Preston zones in Al–Ag alloys under weak shear
  150. Metastable Phases in Al-Zn-Mg Ternary Based Alloys
  151. Analysis of mechanical properties of Al-Zn-Mg-Cu alloys by coherency strain model.
  152. Nature of an Endothermic Peak of As-Quenched Al-11.8 mol%Li Alloys
  153. A New Small-Angle X-ray Scattering Instrument on the French CRG Beamline at the ESRF Multiwavelength Anomalous Scattering/Diffraction Beamline (D2AM)
  154. An Anomalous Small-Angle X-ray Scattering Study on Phase Decomposition in a Model Superalloy NiCrAl
  155. In-situ and simultaneous synchrotron-radiation small-angle and 100 scattering experiments on the low-temperature structure in as-quenched Al-Li alloy during heating
  156. Partial Reversion of Small GP Zones in an Al–Zn Binary Alloy
  157. Simultaneous SAS and 100 Experiments on Phase Decomposition and Reversion in Al–Li Binary Alloys
  158. Formation of Bi2223 Phase in PIT-Processed Tapes
  159. Experimental Techniques for Studying Precipitation Phenomenon and Its Related Science.
  160. Development of high-strength aluminum alloys by mesoscopic structure control
  161. Study on local magnetic flux distribution in type II superconductors by means of small-angle neutron scattering
  162. GMR and micro-structure in bulk AuCo nanogranular alloys
  163. Computer simulation of the kinetics of phase decomposition with the L12 type ordering in an ising lattice system at low temperature
  164. Precipitation Hardening in Fe-Cu Binary and Quaternary Alloys.
  165. SANS Study of Phase Decomposition in Fe-Cu Alloy with Ni and Mn Addition.
  166. Phase decomposition and reversion in Al-Li alloys
  167. SANS study of phase decomposition in Fe-Cu alloy added by Ni and Mn
  168. Structure change of δ' precipitates during heating at a constant rate in Al-Li binary alloys
  169. Study of gallium arsenide on silicon by small angle X-ray scattering
  170. Synchrotron-radiation small-angle scattering measurements of the reversion process of δ′ precipitates in Al-8.1%Li binary alloy
  171. Size Distribution Analysis by a Scaling Method for Small-Angle Scattering Intensity
  172. Small-Angle Neutron Scattering Study of Phase Decomposition in Fe–Cu Binary Alloy
  173. Synchrotron radiation small-angle scattering study of the reversion process of Al-8.1at%Li binary alloy
  174. Calculation of Layer Thickness and Composition Variations of AlxGa1-xAs Crystals for Diffusion-and Electromigration-Limited Growth
  175. X‐ray observation of compositional modulation caused by phase decomposition in GaInP ternary alloys
  176. X‐ray investigation of the ordered structure in AlGaInP quaternary alloys
  177. X‐ray diffraction from ordered regions in GaInP ternary alloys
  178. Growth and coarsening of g. p. Zones in Al- Zn alloys
  179. Small-angle x-ray scattering study of phase separation in amorphous alloys during heating with use of synchrotron radiation
  180. Dynamical structure change during reversion above zone solvus in AlZn binary alloys
  181. Dynamical Structure Change During Reversion in Al-Zn Alloys
  182. High-quality InGaAsP/InP single-quantum wells and superlattice structures grown by low-pressure metalorganic vapor phase epitaxy
  183. Early stage of phase decomposition in an Al-6.7 at% Zn alloy
  184. Scaling of Precipitated Structure in Al-Zn Alloys
  185. Dynamical structure change during reversion in AlZn binary alloy
  186. Isothermal phase decomposition diagram in AlZn binary alloys