All Stories

  1. Mechanical properties of reservoir rock and caprock under varying brine saturation for application of geological carbon storage in deep saline aquifers
  2. Investigation of the Velocities of Coals of Diverse Rank under Water- or Gas-Saturated Conditions for Application in Coalbed Methane Recovery
  3. Experimental investigation of the influence of strain rate on strength; failure attributes and mechanism of Jhiri shale
  4. The Influence of Admixtures on the Hydration Process of Soundless Cracking Demolition Agents (SCDA) for Fragmentation of Saturated Deep Geological Reservoir Rock Formations
  5. Artificial Fracture Stimulation of Rock Subjected to Large Isotropic Confining Stresses in Saline Environments: Application in Deep-Sea Gas Hydrate Recovery
  6. Retained water content after nitrogen driving water on flooding saturated high volatile bituminous coal using low-field nuclear magnetic resonance
  7. Simulation of flow behaviour through fractured unconventional gas reservoirs considering the formation damage caused by water-based fracturing fluids
  8. Theoretical overview of hydraulic fracturing break-down pressure
  9. Three-Dimensional Numerical Investigation of Coupled Flow-Stress-Damage Failure Process in Heterogeneous Poroelastic Rocks
  10. Comparison of CO2 Flow Behavior through Intact Siltstone Sample under Tri-Axial Steady-State and Transient Flow Conditions
  11. Loading History Effect on Creep Deformation of Rock
  12. Characterization of coal porosity and permeability evolution by demineralisation using image processing techniques: A micro-computed tomography study
  13. A Damage Constitutive Model for the Effects of CO2-Brine-Rock Interactions on the Brittleness of a Low-Clay Shale
  14. A Study of the Particle-Level Fabric and Morphology of Granular Soils under One-Dimensional Compression Using Insitu X-ray CT Imaging
  15. An Influence of Thermally-Induced Micro-Cracking under Cooling Treatments: Mechanical Characteristics of Australian Granite
  16. Effects of Water and Brine Saturation on Mechanical Property Alterations of Brown Coal
  17. An integrated approach to simulate fracture permeability and flow characteristics using regenerated rock fracture from 3-D scanning: A numerical study
  18. Thermally-induced mechanical behaviour of a single proppant under compression: Insights into the long-term integrity of hydraulic fracturing in geothermal reservoirs
  19. Major factors influencing proppant behaviour and proppant-associated damage mechanisms during hydraulic fracturing
  20. Experimental Investigation on the Mechanical Behavior of Victorian Brown Coal under Brine Saturation
  21. Temperature Effect on the Thermal Conductivity of Black Coal
  22. Experimental Study of Matrix Permeability of Gas Shale: An Application to CO2-Based Shale Fracturing
  23. Multi-Step Loading Creep Behavior of Red Sandstone after Thermal Treatments and a Creep Damage Model
  24. An analytical thermo-poro-elasticity model for the mechanical responses of a wellbore and core during overcoring
  25. Assessment of dynamic material properties of intact rocks using seismic wave attenuation: an experimental study
  26. Thermal alterations in the poro-mechanical characteristic of an Indian sandstone – A comparative study
  27. An experimental investigation of coupled chemico-mineralogical and mechanical changes in varyingly-cemented sandstones upon CO 2 injection in deep saline aquifer environments
  28. Investigation of the mechanical, microstructural and mineralogical morphology of soundless cracking demolition agents during the hydration process
  29. Strength failure behavior and crack evolution mechanism of granite containing pre-existing non-coplanar holes: Experimental study and particle flow modeling
  30. A Mesh-Free Continuum Based Computational Approach to Modelling Rock Fracture
  31. Super-critical carbon dioxide flow behaviour in low rank coal: A meso-scale experimental study
  32. Investigation of Depth and Injection Pressure Effects on Breakdown Pressure and Fracture Permeability of Shale Reservoirs: An Experimental Study
  33. Failure Mechanical Behavior of Australian Strathbogie Granite at High Temperatures: Insights from Particle Flow Modeling
  34. Effect of Coal Rank on CO2 Adsorption Induced Coal Matrix Swelling with Different CO2 Properties and Reservoir Depths
  35. Mechanical behaviour and permeability evolution of gas-containing coal from unloading confining pressure tests
  36. Influence of Water Saturation on the Mechanical Behaviour of Low-Permeability Reservoir Rocks
  37. Steel-making slag for mineral sequestration of carbon dioxide by accelerated carbonation
  38. Criteria for assessment of internal stability of granular soil
  39. Effects of strain rate on fracture toughness and energy release rate of gas shales
  40. An experimental investigation of applicability of CO 2 enhanced coal bed methane recovery to low rank coal
  41. Discussions on Correction of Goodman Jack Test
  42. Mechanical behaviour of Australian Strathbogie granite under in-situ stress and temperature conditions: An application to geothermal energy extraction
  43. An experimental evaluation of unique CO2 flow behaviour in loosely held fine particles rich sandstone under deep reservoir conditions and influencing factors
  44. Development of a Laboratory- scale Numerical Model to Simulate the Mechanical Behaviour of Deep Saline Reservoir Rocks under Varying Salinity Conditions in Uniaxial and Triaxial Test Environments
  45. A Pore-Scale Simulation on Thermal-Hydromechanical Coupling Mechanism of Rock
  46. An experimental investigation on thermal damage and failure mechanical behavior of granite after exposure to different high temperature treatments
  47. Experimental Study of Strain Rate Sensitivity to Fracture Toughness of Rock using Flattened Brazilian Disc
  48. Gas Transportation and Enhanced Coalbed Methane Recovery Processes in Deep Coal Seams: A Review
  49. An Alternative to Conventional Rock Fragmentation Methods Using SCDA: A Review
  50. CO2 permeability of fractured coal subject to confining pressures and elevated temperature: Experiments and modeling
  51. Mechanism of the Two-Phase Flow Model for Water and Gas Based on Adsorption and Desorption in Fractured Coal and Rock
  52. Laboratory measurement of deformation-induced hydro-mechanical properties of reservoir rock in deep saline aquifers: An experimental study of Hawkesbury formation
  53. A Coupled Thermal–Hydrological–Mechanical Damage Model and Its Numerical Simulations of Damage Evolution in APSE
  54. Effect of accelerated carbonation on the chemical properties and leaching behaviour of Australian coal fly ash, to improve its use as a compost amendment
  55. A macro-scale view of the influence of effective stress on carbon dioxide flow behaviour in coal: an experimental study
  56. Influence of CO2 adsorption on the strength and elastic modulus of low rank Australian coal under confining pressure
  57. Visual representation and characterization of three-dimensional hydrofracturing cracks within heterogeneous rock through 3D printing and transparent models
  58. CDEM-based analysis of the 3D initiation and propagation of hydrofracturing cracks in heterogeneous glutenites
  59. Comparative Study of the Hydromechanical Behavior of Intact, Horizontally Jointed, and Vertically Jointed Rocks under Undrained Conditions
  60. Experimental investigation of the effects of heterogeneity and geostress difference on the 3D growth and distribution of hydrofracturing cracks in unconventional reservoir rocks
  61. Experimental Investigation of Mechanical Properties of Black Shales after CO2-Water-Rock Interaction
  62. Experimental Investigation of Mechanical Properties of Black Shales after CO2-Water-Rock Interaction
  63. Determination of sealing depth of in-seam boreholes for seam gas drainage based on drilling process of a drifter
  64. A novel approach to precise evaluation of carbon dioxide flow behaviour in siltstone under tri-axial drained conditions
  65. Influence of thermal treatment on mode I fracture toughness of certain Indian rocks
  66. An experimental study on behavior of reconstituted low-rank coal under different fluid saturations
  67. An experimental study on mechanical behaviour of siltstone under brine saturation
  68. Investigation on temperature dependent mechanical behaviour of Australian granite
  69. Some key technical issues in modelling of gas transport process in shales: a review
  70. Effect of Varied Durations of Thermal Treatment on the Tensile Strength of Red Sandstone
  71. Unconventional Gas: Experimental Study of the Influence of Subcritical Carbon Dioxide on the Mechanical Properties of Black Shale
  72. A modified NX-borehole jack with flexible loading platens
  73. The brittleness indices used in rock mechanics and their application in shale hydraulic fracturing: A review
  74. A Review of CO2-Enhanced Oil Recovery with a Simulated Sensitivity Analysis
  75. Effect of Coal Rank on Various Fluid Saturations Creating Mechanical Property Alterations Using Australian Coals
  76. Effect of sample size on the fluid flow through a single fractured granitoid
  77. Hydro-mechanical behavior of sandstone with interconnected joints under undrained conditions
  78. Deformation Mechanics and Acoustic Propagation in Reservoir Rock Under Brine and Oil Saturation: An Experimental Study
  79. Influence of CO2–Brine Co-injection on CO2Storage Capacity Enhancement in Deep Saline Aquifers: An Experimental Study on Hawkesbury Sandstone Formation
  80. A new model based on gene expression programming to estimate air flow in a single rock joint
  81. Super-critical CO2 saturation-induced mechanical property alterations in low rank coal: An experimental study
  82. Optimal model for particle size distribution of granular soil
  83. Experimental investigation of geochemical and mineralogical effects of CO2 sequestration on flow characteristics of reservoir rock in deep saline aquifers
  84. Effect of bedding planes, their orientation and clay depositions on effective re-injection of produced brine into clay rich deep sandstone formations: Implications for deep earth energy extraction
  85. Time-Dependent Strength and Mineralogy of Lime-GGBS Treated Naturally Occurring Acid Sulfate Soils
  86. Erratum for “Time-Dependent Strength and Mineralogy of Lime-GGBS Treated Naturally Occurring Acid Sulfate Soils” by Shahidul Islam, Asadul Haque, Siobhan A. Wilson, and P. G. Ranjith, F.ASCE
  87. Damage model of coal under creep and triaxial compression
  88. The potential of high heat generating granites as EGS source to generate power and reduce CO2 emissions, western Arabian shield, Saudi Arabia
  89. Current opinions on foam-based hydro-fracturing in deep geological reservoirs
  90. A review of shale swelling by water adsorption
  91. Numerical and experimental investigation of hydraulic fracturing in Kaolin clay
  92. A macro-scale experimental study of sub- and super-critical CO2 flow behaviour in Victorian brown coal
  93. An Experimental and Numerical Study on Cracking Behavior of Brittle Sandstone Containing Two Non-coplanar Fissures Under Uniaxial Compression
  94. Geothermal energy resources of Jizan, SW Saudi Arabia
  95. A laboratory-scale study of the aqueous mineral carbonation of coal fly ash for CO2 sequestration
  96. A numerical study of triaxial mechanical behaviour of geopolymer at different curing temperatures: An application for geological sequestration wells
  97. Geochemical aspects of CO2 sequestration in deep saline aquifers: A review
  98. Discrete element modeling on the crack evolution behavior of brittle sandstone containing three fissures under uniaxial compression
  99. Numerical Modeling of Jointed Rock Under Compressive Loading Using X-ray Computerized Tomography
  100. CO2-induced mechanical behaviour of Hawkesbury sandstone in the Gosford basin: An experimental study
  101. Non-linear stress–strain behaviour of reservoir rock under brine saturation: An experimental study
  102. Thermo-mechanical properties of Bundelkhand granite near Jhansi, India
  103. Effects of coring directions on the mechanical properties of Chinese shale
  104. Do joint geometrical properties influence the fracturing behaviour of jointed rock? An investigation through joint orientation
  105. Determination of effective stress parameters for effective CO2 permeability in deep saline aquifers: An experimental study
  106. Experimental investigation on mechanical damage characteristics of sandstone under triaxial cyclic loading
  107. Experimental and numerical studies on the mechanical behaviour of Australian Strathbogie granite at high temperatures: An application to geothermal energy
  108. Thermal-Diffusivity and Heat-Capacity Measurements of Sandstone at High Temperatures Using Laser Flash and DSC Methods
  109. Optimization of enhanced coal-bed methane recovery using numerical simulation
  110. CT images of rock under stressed conditions
  111. Finite element analysis of width effect in interface debonding of FRP plate bonded to concrete
  112. An experimental investigation on behaviour of coal under fluid saturation, using acoustic emission
  113. Influence of sorption time in CO2-ECBM process in Indian coals using coupled numerical simulation
  114. Strain Rate Effect on the Mechanical Behaviour of Sandstones with Different Grain Sizes
  115. A Mesostructure-based Damage Model for Thermal Cracking Analysis and Application in Granite at Elevated Temperatures
  116. Sand production during the extrusion of hydrocarbons from geological formations: A review
  117. Fracture mechanical behavior of red sandstone containing a single fissure and two parallel fissures after exposure to different high temperature treatments
  118. Biochar Sequestration in Lime-Slag Treated Synthetic Soils: A Green Approach to Ground Improvement
  119. Evaluation of creep mechanical behavior of deep-buried marble under triaxial cyclic loading
  120. Effect of Salinity on Effective CO2 Permeability in Reservoir Rock Determined by Pressure Transient Methods: an Experimental Study on Hawkesbury Sandstone
  121. Deep coal seams as a greener energy source: a review
  122. Improvement of acid sulfate soils using lime-activated slag
  123. A new parameter to describe the persistency of non-persistent joints
  124. Complete triaxial stress–strain curves for geopolymer
  125. Effect of cooling rate on the mechanical behavior of heated Strathbogie granite with different grain sizes
  126. A numerical study of CO2 flow through geopolymer under down-hole stress conditions: Application for CO2 sequestration wells
  127. Effect of Brine Saturation on Carbonation of Coal Fly Ash for Mineral Sequestration of CO2
  128. Water-weakening behavior of Hawkesbury sandstone in brittle regime
  129. Laboratory Simulation of Flow through Single Fractured Granite
  130. Distinct Element Model Analysis of Mechanical Behavior of Rock with Interconnected Non-Persistent Joints
  131. Specimen Slenderness and the Influence of Joint Orientation on the Uniaxial Compressive Strength of Singly Jointed Rock
  132. Understanding and application of CO2 adsorption capacity estimation models for coal types
  133. Salinity-dependent strength and stress–strain characteristics of reservoir rocks in deep saline aquifers: An experimental study
  134. Mechanical behaviour of wellbore materials saturated in brine water with different salinity levels
  135. Effect of joint orientation on the hydromechanical behavior of singly jointed sandstone experiencing undrained loading
  136. A novel computational approach for large deformation and post-failure analyses of segmental retaining wall systems
  137. Simulating Flow through Fractures in a Rock Mass Using Analog Material
  138. Effect of different mix compositions on apparent carbon dioxide (CO2) permeability of geopolymer: Suitability as well cement for CO2 sequestration wells
  139. Modeling of Transverse Thermal Cracking of FRP Bars Embedded in Concrete
  140. Energy monitoring and analysis during deformation of bedded-sandstone: Use of acoustic emission
  141. Effect of temperature on permeability of geopolymer: A primary well sealant for carbon capture and storage wells
  142. The Taguchi approach to the evaluation of the influence of different testing conditions on the mechanical properties of rock
  143. Permeability of sub-critical carbon dioxide in naturally fractured Indian bituminous coal at a range of down-hole stress conditions
  144. Influence of the geometry of partially-spanning joints on mechanical properties of rock in uniaxial compression
  145. Effects of gaseous and super-critical carbon dioxide saturation on the mechanical properties of bituminous coal from the Southern Sydney Basin
  146. Fracture Behavior of Intact Rock Using Acoustic Emission: Experimental Observation and Realistic Modeling
  147. Thermal conductivity of soils and rocks from the Melbourne (Australia) region
  148. Investigating the effect of salt and acid impurities in supercritical CO2 as relevant to the corrosion of carbon capture and storage pipelines
  149. Understanding the significance ofin situcoal properties for CO2sequestration: An experimental and numerical study
  150. The use of coal combustion fly ash as a soil amendment in agricultural lands (with comments on its potential to improve food security and sequester carbon)
  151. Coal cleat permeability for gas movement under triaxial, non-zero lateral strain condition: A theoretical and experimental study
  152. Sub- and super-critical carbon dioxide permeability of wellbore materials under geological sequestration conditions: An experimental study
  153. Numerical Analysis of Fluid Flow in Single Rock Fracture
  154. The evolution of rock failure with discontinuities due to shear creep
  155. Deformation characteristics of bedded sandstone in uniaxial compression
  156. Strength of geopolymer cured in saline water in ambient conditions
  157. Effective parameters for sand production in unconsolidated formations: An experimental study
  158. Behaviour of Brittle Material in Multiple Loading Rates Under Uniaxial Compression
  159. Investigation of the potential of coal combustion fly ash for mineral sequestration of CO2 by accelerated carbonation
  160. A parametric study of coal mass and cap rock behaviour and carbon dioxide flow during and after carbon dioxide injection
  161. The permeability of geopolymer at down-hole stress conditions: Application for carbon dioxide sequestration wells
  162. Advanced core flooding apparatus to estimate permeability and storage dynamics of CO2 in large coal specimens
  163. Numerical modeling of Gondwana coal seams in India as coalbed methane reservoirs substituted for carbon dioxide sequestration
  164. CO2 permeability of Indian bituminous coals: Implications for carbon sequestration
  165. Analysis of Interfacial Debonding of Geopolymer Annular Sealing in CO2 Geo-sequestration Wellbore
  166. Parameters influencing the flow performance of natural cleat systems in deep coal seams experiencing carbon dioxide injection and sequestration
  167. Permeability of the fractured rockmass – A review
  168. Stress analysis of cemented wellbores in geosequestration of carbon dioxide
  169. Characterization of Mechanical Behaviour of Saturated Sandstone Using a Newly Developed Triaxial Apparatus
  170. Transformation plasticity and the effect of temperature on the mechanical behaviour of Hawkesbury sandstone at atmospheric pressure
  171. Carbon Dioxide Storage in Coal: Reconstituted Coal as a Structurally Homogeneous Substitute for Coal
  172. A study of safe CO2storage capacity in saline aquifers: a numerical study
  173. Rebuttal to “Quantities relevant to the effectiveness of carbon sequestration in coal beds”
  174. The Effects of Injection and Production Well Arrangement on Carbon Dioxide Sequestration in Deep, Unmineable Coal Seams: A Numerical Study
  175. Effects of cleat performance on strength reduction of coal in CO2 sequestration
  176. Constitutive models describing the influence of the geometry of partially-spanning joints on jointed rock mass strength: Regression and fuzzy logic analysis of experimental data
  177. On covert channels between virtual machines
  178. Carbon dioxide sequestration effects on coal's hydro-mechanical properties: a review
  179. 3D modeling of stratified and irregularly jointed rock slope and its progressive failure
  180. A comparative study of generalized regression neural network approach and adaptive neuro-fuzzy inference systems for prediction of unconfined compressive strength of rocks
  181. Mechanical Behaviour of Reservoir Rock Under Brine Saturation
  182. Investigation of temperature effect on permeability of naturally fractured black coal for carbon dioxide movement: An experimental and numerical study
  183. Scale Effect on Strength and Failure Modes of Open Pit Cut Slope of Wardha Valley Coalfield in India
  184. A Novel Testing Apparatus for Hydromechanical Investigation of Rocks: Geo-Sequestration of Carbon dioxide
  185. Investigation of the influence of coal swelling on permeability characteristics using natural brown coal and reconstituted brown coal specimens
  186. A study of methodologies for CO2 storage capacity estimation of saline aquifers
  187. Influence of the geometry of partially-spanning joints on the uniaxial compressive strength of rock
  188. Effect of strain rate on strength properties of low-calcium fly-ash-based geopolymer mortar under dry condition
  189. Estimation of Gas Adsorption Capacity in Coal: A Review and an Analytical Study
  190. Carbon Capture and Storage in Indian Coal Seams
  191. A study of methodologies for CO2 storage capacity estimation of coal
  192. Effects of saturation medium and pressure on strength parameters of Latrobe Valley brown coal: Carbon dioxide, water and nitrogen saturations
  193. Modelling of intact and jointed mudstone samples under uniaxial and triaxial compression
  194. The effects of sub-critical and super-critical carbon dioxide adsorption-induced coal matrix swelling on the permeability of naturally fractured black coal
  195. Sub- and super-critical carbon dioxide flow behavior in naturally fractured black coal: An experimental study
  196. Geopolymer as well cement and the variation of its mechanical behavior with curing temperature
  197. Use of Digital Terrestrial Photogrammetry in rocky slope stability analysis by Distinct Elements Numerical Methods
  198. Environmental life-cycle comparisons of steel production and recycling: sustainability issues, problems and prospects
  199. The influence of bedding angle on failure mechanisms in sandstone
  200. A parametric study to investigate the effect of injection and production well operation on the CO2 sequestration process in deep unmineable coal seams
  201. Study of Caprock Integrity in Geosequestration of Carbon Dioxide
  202. Applicability of the ‘cubic law’ for non-Darcian fracture flow
  203. A new triaxial apparatus to study the mechanical and fluid flow aspects of carbon dioxide sequestration in geological formations
  204. The Effect of Specimen Size on Strength and Other Properties in Laboratory Testing of Rock and Rock-Like Cementitious Brittle Materials
  205. Characterization of Rock Spatial Modeling and Quick Identification of Unstable Blocks Based on a Digital Photogrammetry
  206. Implications of Joint Properties on the Strength of a Jointed Rock Mass
  207. Effects of Seam Conditions, Injection Pressure, and Gas Composition on CO 2 Sequestration in Coal
  208. A Study of CO 2 Storage Capacity Estimation under Supercritical Conditions
  209. Artificial neural network for prediction of air flow in a single rock joint
  210. Effect of joints on p–y behaviour of laterally loaded piles socketed into mudstone
  211. Real time paddy crop field monitoring using Zigbee network
  212. Effects of effective stress changes on permeability of latrobe valley brown coal
  213. An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle material
  214. Fluid flow in conventional reservoirs
  215. The steel industry, abiotic resource depletion and life cycle assessment: a real or perceived issue?
  216. Development of a reconstituted brown coal material using cement as a binder
  217. A review of coal properties pertinent to carbon dioxide sequestration in coal seams: with special reference to Victorian brown coals
  218. A review of studies on CO2 sequestration and caprock integrity
  219. Iron ore and steel production trends and material flows in the world: Is this really sustainable?
  220. The effect of CO2 saturation on mechanical properties of Australian black coal using acoustic emission
  221. Correlating index properties of rocks with P-wave measurements
  222. A review on existing opencast coal mining methods within Australia
  223. Physico-mechanical behaviour of southeastern Melbourne sedimentary rocks
  224. Geological and geotechnical aspects of underground coal mining methods within Australia
  225. Finite element simulation of fluid flow in fractured rock media
  226. Mechanical Properties of Reconstituted Australian Black Coal
  227. Analytical assessment of horizontal well efficiency with reference to improved oil recovery of the South-East Dragon oil field southern offshore of Vietnam
  228. Metal concentrations and metal mobility in unsaturated mine wastes in mining areas of Goa, India
  229. Modeling the Effects of Heterogeneity and Anisotropy on the Excavation Damaged/Disturbed Zone (EDZ)
  230. An experimental study of single and two-phase fluid flow through fractured granite specimens
  231. life cycle assessment for mining industry
  232. Hydraulic conductivity of biopolymer-treated silty sand
  233. Numerical Modelling of Laboratory Behaviour of Single Laterally Loaded Piles Socketed into Jointed Rocks
  234. Reuse of iron ore mineral wastes in civil engineering constructions: A case study
  235. A study of the effect of displacement rate and moisture content on the mechanical properties of concrete: Use of acoustic emission
  236. A study of rock abrasivity and tool wear in Coal Measures Rocks
  237. Performance evaluation of cement stabilized fly ash–GBFS mixes as a highway construction material
  238. The mechanical behaviour of coal with respect to CO2 sequestration in deep coal seams
  239. How fluids move through rocks under different environmental conditions
  240. The Geomechanical Behavior of Australian Black Coal under the Effects of CO 2 Injection: Uniaxial Testing
  241. The effect of CO2 on the geomechanical and permeability behaviour of brown coal: Implications for coal seam CO2 sequestration
  242. Characterization of two-phase flow in a single rock joint
  243. Characterisation of fractured rocks under uniaxial loading states
  244. Two-Phase (Air and Water) Flow through Rock Joints: Analytical and Experimental Study
  245. Some aspects of unsaturated flow in jointed rock
  246. Laboratory Measurement of Two-Phase Flow Parameters in Rock Joints Based on High Pressure Triaxial Testing