All Stories

  1. Effect of Ni addition and cryogenic hardening on the mechanical and tribological properties of self-lubricating steels produced by MIM

    Article • Powder Metallurgy, June 2020, Taylor & Francis

    Professor Jose Daniel Biasoli de melllo

  2. Influence of the ball material on friction and wear in microabrasion tests

    Article • Wear, June 2020, Elsevier

    Professor Jose Daniel Biasoli de melllo

  3. Improvement of tribological properties of sintered self-lubricating composites produced by surface Mo-enrichment

    Article • Wear, February 2020, Elsevier

    Professor Jose Daniel Biasoli de melllo

  4. Rheology and soft tribology of thickened dispersions aiming the development of oropharyngeal dysphagia-oriented products

    Article • Current Research in Food Science, February 2020, Elsevier

    Professor Jose Daniel Biasoli de melllo

  5. Effect of iron oxide debris on the reciprocating sliding wear of tool steels

    Article • Wear, April 2019, Elsevier

    Professor Jose Daniel Biasoli de melllo

  6. Influence of metallurgical texture on the abrasive wear of hot-rolled wear resistant carbon steels

    Article • Wear, April 2019, Elsevier

    Professor Jose Daniel Biasoli de melllo

  7. Influence of stainless steel specimen topography on micro-abrasion and micro-abrasion-corrosion

    Article • Wear, April 2019, Elsevier

    Professor Jose Daniel Biasoli de melllo

  8. Mechanical effects on the corrosion resistance of ferritic stainless steels during microabrasion-corrosion

    Article • Wear, April 2019, Elsevier

    Professor Jose Daniel Biasoli de melllo

  9. Orthomicrotribometer

    Article • Wear, April 2019, Elsevier

    Professor Jose Daniel Biasoli de melllo

  10. Wear in cold rolling milling rolls: A methodological approach

    Article • Wear, April 2019, Elsevier

    Professor Jose Daniel Biasoli de melllo

  11. The Effect of Using Hollow Cathode on the Tribological Behavior of Plasma Nitrided Layers.

    Article • January 2019, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  12. Tribological Behaviour of Plasma-Functionalized Graphene as Low-Viscosity Oil Additive

    Article • Tribology Letters, August 2018, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  13. Effect of soft substrate topography on tribological behavior of multifunctional DLC coatings

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, July 2018, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  14. DLC deposited onto nitrided grey and nodular cast iron substrates: An unexpected tribological behaviour

    Article • Tribology International, May 2018, Elsevier

    Professor Jose Daniel Biasoli de melllo

  15. Self-lubricating composites containing MoS2: A review

    Article • Tribology International, April 2018, Elsevier

    Professor Jose Daniel Biasoli de melllo

  16. Solid lubrication in fluid film lubrication

    Article • Lubrication Science, January 2018, Wiley

    Professor Jose Daniel Biasoli de melllo

  17. Life of cutlery cutting tools: effects of surface finish

    Article • Industrial Lubrication and Tribology, November 2017, Emerald

    Professor Jose Daniel Biasoli de melllo

  18. Effect of Heat Treatments and SiC Content in the Mechanical Properties and Microstructure of Self-Lubricating Steels

    Article • Materials Research, November 2017, FapUNIFESP (SciELO)

    Professor Jose Daniel Biasoli de melllo

  19. Structure and properties of in situ-generated two-dimensional turbostratic graphite nodules

    Article • Carbon, November 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  20. Influence of Surface Finishing on the Tribological Behavior of Self-Lubricating Iron-Based Composites

    Article • Tribology Transactions, September 2017, Taylor & Francis

    Professor Jose Daniel Biasoli de melllo

  21. Tribological behaviour of sintered iron based self-lubricating composites

    Article • Friction, September 2017, Tsinghua University Press

    Professor Jose Daniel Biasoli de melllo

  22. Development of the Self-Lubricating Steels by Compression of Granulated Powders

    Article • Materials Science Forum, July 2017, Trans Tech Publications

    Professor Jose Daniel Biasoli de melllo, Paulo Orsi

  23. Effect of Liquid Phase during Sintering on Mechanical and Tribological Properties of Self-Lubricating Composites

    Article • Materials Science Forum, July 2017, Trans Tech Publications

    Professor Jose Daniel Biasoli de melllo

  24. Strain Hardening: Can it Affect Abrasion Resistance?

    Article • Tribology Letters, April 2017, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  25. Abrasive wear of multilayered/gradient CrAlSiN PVD coatings: Effect of interface roughness and of superficial flaws

    Article • Wear, April 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  26. Assessment of a multifuncional tribological coating (nitride+DLC) deposited on grey cast iron in a mixed lubrication regime

    Article • Wear, April 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  27. Effect of debris size on the reciprocating sliding wear of aluminium

    Article • Wear, April 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  28. Effect of hexagonal boron nitride and graphite on mechanical and scuffing resistance of self lubricating iron based composite

    Article • Wear, April 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  29. Micro abrasion-corrosion of ferritic stainless steels

    Article • Wear, April 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  30. Sliding wear of cobalt-based alloys used in rolling seamless tubes

    Article • Wear, April 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  31. The Influence of Crystallographic Texture and Niobium Stabilisation on the Corrosion Resistance of Ferritic Stainless Steel

    Article • Materials Research, March 2017, FapUNIFESP (SciELO)

    Professor Jose Daniel Biasoli de melllo

  32. Topography evolution and friction coefficient of gray and nodular cast irons with duplex plasma nitrided + DLC coating

    Article • Surface and Coatings Technology, March 2017, Elsevier

    Professor Jose Daniel Biasoli de melllo

  33. Metallurgical Aspects of Self-lubricating Composites Containing Graphite and MoS2

    Article • Journal of Materials Engineering and Performance, February 2017, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  34. Topography and surface energy of dental implants: a methodological approach

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, January 2017, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  35. Influence of the SiC content and sintering temperature on the microstructure, mechanical properties and friction behaviour of sintered self-lubricating composites

    Article • Powder Metallurgy, October 2016, Taylor & Francis

    Professor Jose Daniel Biasoli de melllo

  36. Effects of Different Plasma Nitrided Layers on the Tribological Performance of DLC Coatings

    Article • Materials Research, September 2016, FapUNIFESP (SciELO)

    Professor Jose Daniel Biasoli de melllo

  37. Synthesis of nanostructured flower-like MoS2 and its friction properties as additive in lubricating oils

    Article • Industrial Lubrication and Tribology, September 2016, Emerald

    Professor Jose Daniel Biasoli de melllo

  38. Genesis and stability of tribolayers in solid lubrication: case of pair DLC-stainless steel

    Article • Journal of Materials Research and Technology, April 2016, Elsevier

    Professor Jose Daniel Biasoli de melllo

  39. Effect of temperature and atmosphere on the tribological behavior of a polyether ether ketone composite

    Article • Friction, October 2015, Tsinghua University Press

    Professor Jose Daniel Biasoli de melllo

  40. Wear debris generation during cold rolling of stainless steels

    Article • Journal of Materials Processing Technology, September 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  41. Influence of layer thickness on sliding wear of multifunctional tribological coatings

    Article • Industrial Lubrication and Tribology, August 2015, Emerald

    Professor Jose Daniel Biasoli de melllo

  42. Effect of Macrogeometry on the Surface Topography of Dental Implants

    Article • The International Journal of Oral & Maxillofacial Implants, July 2015, Quintessence Publishing

    Professor Jose Daniel Biasoli de melllo

  43. Abrasion–corrosion: New insights from force measurements

    Article • Wear, May 2015, Elsevier

    prof. Marcelo Braga dos Santos, Professor Jose Daniel Biasoli de melllo

  44. Potentiality of triboscopy to monitor friction and wear

    Article • Wear, May 2015, Elsevier

    prof. Marcelo Braga dos Santos, Professor Jose Daniel Biasoli de melllo

  45. Effect of nature of nitride phases on sliding wear of plasma nitrided sintered iron

    Article • Wear, May 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  46. Effect of surface finishing, temperature and chemical ageing on the tribological behaviour of a polyether ether ketone composite/52100 pair

    Article • Wear, May 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  47. Tribological evaluation of self-lubricating sintered steels

    Article • Wear, May 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  48. Effect of surface topography on the dynamics of the abrasive particles during micro-abrasion

    Article • Wear, February 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  49. Thermodynamic aspects during the processing of sintered materials

    Article • Powder Technology, February 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  50. Physicochemical characterisation of tribolayers by micro-Raman and GDOES analyses

    Article • Tribology International, January 2015, Elsevier

    Professor Jose Daniel Biasoli de melllo

  51. Effect of double pressing/double sintering on the sliding wear of self-lubricating sintered composites

    Article • Tribology International, February 2014, Elsevier

    Professor Jose Daniel Biasoli de melllo

  52. Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites

    Article • Wear, April 2013, Elsevier

    Professor Jose Daniel Biasoli de melllo

  53. Effect of the metallic matrix on the sliding wear of plasma assisted debinded and sintered MIM self-lubricating steel

    Article • Wear, April 2013, Elsevier

    Professor Jose Daniel Biasoli de melllo

  54. Failure mode in sliding wear of PEEK based composites

    Article • Wear, April 2013, Elsevier

    Professor Jose Daniel Biasoli de melllo

  55. Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls

    Article • Wear, April 2013, Elsevier

    Professor Jose Daniel Biasoli de melllo

  56. Stainless steel as an antiwear material for the bio-fuel industry

    Article • Wear, April 2013, Elsevier

    Professor Jose Daniel Biasoli de melllo

  57. Influence of layer thickness on hardness and scratch resistance of Si-DLC/CrN coatings

    Article • Tribology - Materials Surfaces & Interfaces, December 2012, SAGE Publications

    Professor Jose Daniel Biasoli de melllo

  58. Influence of Layer Thickness on the Properties of Multifunctional Tribological Coatings

    Article • July 2012, ASME International

    Professor Jose Daniel Biasoli de melllo

  59. Correlation among abrasive wear tests

    Article • Lubrication Science, June 2012, Wiley

    Professor Jose Daniel Biasoli de melllo

  60. Effect of precursor content and sintering temperature on the scuffing resistance of sintered self lubricating steel

    Article • Wear, July 2011, Elsevier

    Professor Jose Daniel Biasoli de melllo

  61. Transitions in abrasive wear mechanisms: Effect of the superimposition of interactions

    Article • Wear, June 2011, Elsevier

    Professor Jose Daniel Biasoli de melllo

  62. Effect of nature of nitride phases on microabrasion of plasma nitrided sintered iron

    Article • Tribology - Materials Surfaces & Interfaces, December 2010, Taylor & Francis

    Professor Jose Daniel Biasoli de melllo

  63. Internal lubricant as an alternative to coating steels

    Article • Metal Powder Report, November 2010, Elsevier

    Professor Jose Daniel Biasoli de melllo

  64. Abrasive wear mechanisms of multi-components ferrous alloys abraded by soft, fine abrasive particles

    Article • Wear, October 2010, Elsevier

    Professor Jose Daniel Biasoli de melllo

  65. ‘Fine tuned’ steels point the way to a focused future

    Article • Metal Powder Report, May 2010, Elsevier

    Professor Jose Daniel Biasoli de melllo

  66. Effect of Sintering Temperature on the Tribological Behavior of Plasma Assisted Debinded and Sintered MIM Self Lubricating Steels

    Article • January 2010, ASME International

    Professor Jose Daniel Biasoli de melllo

  67. Surface Integrity and Residual Stresses Analysis by Strain Gages after Hard Turning Process of Case Hardened Steel AISI 8620

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Professor Jose Daniel Biasoli de melllo

  68. Using parallel scratches to simulate abrasive wear

    Article • Wear, October 2009, Elsevier

    Professor Jose Daniel Biasoli de melllo

  69. Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: The relationship between microstructure and wear

    Article • Wear, June 2009, Elsevier

    Professor Jose Daniel Biasoli de melllo

  70. Effect of the actual environment present in hermetic compressors on the tribological behaviour of a Si-rich multifunctional DLC coating

    Article • Wear, June 2009, Elsevier

    Professor Jose Daniel Biasoli de melllo

  71. Lapping, polishing and Ultrasonic Machining of quartz mono crystals

    Article • International Journal of Surface Science and Engineering, January 2008, Inderscience Publishers

    Professor Jose Daniel Biasoli de melllo

  72. Friction and wear behaviour of steam-oxidized sintered iron components coated with manganese phosphate

    Article • Wear, September 2007, Elsevier

    Professor Jose Daniel Biasoli de melllo

  73. Relationship between test severity and wear mode transition in micro-abrasive wear tests

    Article • Wear, September 2007, Elsevier

    Professor Jose Daniel Biasoli de melllo

  74. Effect of the Nature of Nitride Phases on the Micro Abrasion of Plasma Nitrided Sintered Iron

    Article • January 2007, ASME International

    Professor Jose Daniel Biasoli de melllo

  75. A methodology to determine surface durability in multifunctional coatings applied to soft substrates

    Article • Tribology International, August 2006, Elsevier

    Professor Jose Daniel Biasoli de melllo

  76. Effect of temperature, normal load and pre-oxidation on the sliding wear of multi-component ferrous alloys

    Article • Wear, July 2005, Elsevier

    Professor Jose Daniel Biasoli de melllo

  77. Abrasive wear of steam-treated sintered iron

    Article • Wear, January 2005, Elsevier

    Professor Jose Daniel Biasoli de melllo

  78. Ultrasonic abrasion of quartz crystals

    Article • Wear, August 2003, Elsevier

    Professor Jose Daniel Biasoli de melllo

  79. Effect of processing parameters on the surface durability of steam-oxidized sintered iron

    Article • Wear, October 2001, Elsevier

    Professor Jose Daniel Biasoli de melllo

  80. Effect of compaction pressure and powder grade on microstructure and hardness of steam oxidised sintered iron

    Article • Powder Metallurgy, January 2001, Taylor & Francis

    Professor Jose Daniel Biasoli de melllo

  81. Effect of crystal orientation on lapping and polishing processes of natural quartz

    Article • IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, September 2000, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Jose Daniel Biasoli de melllo

  82. Two-body abrasive wear of Al–SiC composites

    Article • Wear, December 1999, Elsevier

    Professor Jose Daniel Biasoli de melllo

  83. Wear resistance and wear mechanisms of WC–12%Co thermal sprayed coatings in three-body abrasion

    Article • Wear, December 1999, Elsevier

    Professor Jose Daniel Biasoli de melllo

  84. Three-body abrasion of Al–SiC composites

    Article • Wear, April 1999, Elsevier

    Professor Jose Daniel Biasoli de melllo

  85. On the abrasive wear of zirconias

    Article • Wear, March 1997, Elsevier

    Professor Jose Daniel Biasoli de melllo

  86. A sclerometric study of unidirectionally solidified Cr-Mo white cast irons

    Article • Wear, September 1986, Elsevier

    Professor Jose Daniel Biasoli de melllo

  87. Abrasion mechanisms of white cast iron II: Influence of the metallurgical structure of VCr white cast irons

    Article • Materials Science and Engineering, March 1986, Elsevier

    Professor Jose Daniel Biasoli de melllo

  88. Eutectoid transformations and precipitation in high carbon tool steels

    Article • Journal of Materials Science, October 1985, Springer Science + Business Media

    Professor Jose Daniel Biasoli de melllo

  89. Abrasion mechanisms of white cast iron I: Influence of the metallurgical structure of molybdenum white cast irons

    Article • Materials Science and Engineering, August 1985, Elsevier

    Professor Jose Daniel Biasoli de melllo

  90. Phase equilibria and solidification sequences of white cast irons containing vanadium and chronium

    Article • Materials Science and Engineering, October 1984, Elsevier

    Professor Jose Daniel Biasoli de melllo