All Stories

  1. Characterization of scintillating materials in use for brachytherapy fiber based dosimeters

    Article • Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, November 2022, Elsevier

    Prof Jurgen Van Erps

  2. Design, tolerancing and fabrication of a freeform lightguide based on the flow-line method

    Article • October 2022, SPIE

    Prof Jurgen Van Erps

  3. ETpathfinder: a cryogenic testbed for interferometric gravitational-wave detectors

    Article • Classical and Quantum Gravity, September 2022, Institute of Physics Publishing

    Prof Jurgen Van Erps

  4. Design, laser direct writing prototyping, and characterization of fan-out diffractive optical elements for optical interconnect applications

    Article • May 2022, SPIE

    Prof Jurgen Van Erps

  5. Design and demonstration of a six-channel multiresolution imaging system

    Article • Applied Optics, March 2022, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  6. Laser direct writing of short-range interconnect interfacing structures

    Article • March 2022, SPIE

    Prof Jurgen Van Erps

  7. On the potential use of two-photon polymerization to 3D print chromatographic packed bed supports

    Article • Journal of Chromatography A, January 2022, Elsevier

    Prof Jurgen Van Erps

  8. Design and replication of a six-channel foveated imaging system

    Article • November 2021, SPIE

    Prof Jurgen Van Erps

  9. Increasing the Microfabrication Performance of Synthetic Hydrogel Precursors through Molecular Design

    Article • Biomacromolecules, November 2021, American Chemical Society (ACS)

    Prof Jurgen Van Erps

  10. Miniature freeform flow-line lightguide for sensing: from design to fabrication

    Article • Optics Express, October 2021, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  11. Two-Photon Polymerization-based Direct Laser Writing and Characterization of Micro-Lenses for Optical Interconnect Applications

    Article • September 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  12. Design and two-photon direct laser writing of low-loss waveguides, tapers and S-bends

    Article • Journal of Physics Photonics, August 2021, Institute of Physics Publishing

    Prof Jurgen Van Erps

  13. Design and Fabrication of Straight Waveguides, Tapers and S-Bends with Two-Photon Direct Laser Writing

    Article • June 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  14. General measurement technique of the ratio between chromatic dispersion and the nonlinear coefficient

    Article • June 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  15. 3D nanoprinting of mode-field conversion tapers for low-loss optical interfacing of single-mode fibers and photonic integrated circuits

    Article • March 2021, SPIE

    Prof Jurgen Van Erps

  16. Interfacing compontents alllowing to maximize optical coupling efficiency

    Article • Optics Express, November 2020, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  17. Thiol-Norbornene gelatin hydrogels: influence of thiolated crosslinker on network properties and high definition 3D printing

    Article • Biofabrication, November 2020, Institute of Physics Publishing

    Prof Jurgen Van Erps

  18. Miniaturized broadband spectrometer based on a three-segment diffraction grating for spectral tissue sensing

    Article • Optics and Lasers in Engineering, November 2020, Elsevier

    Prof Jurgen Van Erps

  19. Low-loss and high-efficiency fiber-to-chip interfacing components

    Article • Journal of Lightwave Technology, September 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  20. Measurement of the soliton number in guiding media through continuum generation

    Article • Optics Letters, August 2020, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  21. Designer Descemet Membranes Containing PDLLA and Functionalized Gelatins as Corneal Endothelial Scaffold

    Article • Advanced Healthcare Materials, June 2020, Wiley

    Prof Jurgen Van Erps

  22. Design and prototyping of beam shapers to generate circular or square top-hat beams of different size for additive manufacturing applications

    Article • April 2020, SPIE

    Prof Jurgen Van Erps

  23. Mode-field matching design, 3D fabrication and characterization of down-tapers on single-mode optical fiber tips for coupling to photonic integrated circuits

    Article • March 2020, SPIE

    Prof Jurgen Van Erps

  24. SERS using two-photon polymerized nanostructures for mycotoxin detection

    Article • RSC Advances, January 2020, Royal Society of Chemistry

    Prof Jurgen Van Erps

  25. (Photo-)crosslinkable gelatin derivatives for biofabrication applications

    Article • Acta Biomaterialia, October 2019, Elsevier

    Prof Jurgen Van Erps

  26. Technological advancements for the development of stem cell-based models for hepatotoxicity testing

    Article • Archives of Toxicology, April 2019, Springer Science + Business Media

    Prof Jurgen Van Erps

  27. Two-photon direct laser writing of beam expansion tapers on single-mode optical fibers

    Article • Optics & Laser Technology, April 2019, Elsevier

    Prof Jurgen Van Erps

  28. Design and Ultraprecision Diamond Machining of Beam Shaping Components for High-Power CO2 Lasers in Additive Manufacturing Applications

    Article • January 2019, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  29. Replication of a polymer surface plasmon resonance freeform optical element

    Article • January 2019, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  30. Down-scaling grating couplers and waveguides in single-crystal diamond for VIS-UV operation

    Article • Journal of Physics Photonics, December 2018, Institute of Physics Publishing

    Prof Jurgen Van Erps

  31. Directional Coupler Based on Single-Crystal Diamond Waveguides

    Article • IEEE Journal of Selected Topics in Quantum Electronics, November 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  32. Evaluation of 3D-culture methods for the hepatic differentiation of human skin-derived stem cells

    Article • Toxicology Letters, October 2018, Elsevier

    Prof Jurgen Van Erps

  33. Relaxing alignment tolerance in single-mode fiber connections using 3D nanoprinted beam expanders

    Article • September 2018, SPIE

    Prof Jurgen Van Erps

  34. Graphene’s nonlinear-optical physics revealed through exponentially growing self-phase modulation

    Article • Nature Communications, July 2018, Springer Science + Business Media

    Prof Jurgen Van Erps

  35. Highly Reactive Thiol-Norbornene Photo-Click Hydrogels: Toward Improved Processability

    Article • Macromolecular Rapid Communications, June 2018, Wiley

    Prof Jurgen Van Erps

  36. Localized optical-quality doping of graphene on silicon waveguides through a TFSA-containing polymer matrix

    Article • Journal of Materials Chemistry C, January 2018, Royal Society of Chemistry

    Prof Jurgen Van Erps

  37. Extra-ordinary nonlinear-optical behavior in silica-core waveguides covered with graphene

    Article • January 2018, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  38. Integrated photonics in single-crystal diamond: demonstration of mm-long waveguides, high-efficiency gratings and wideband directional couplers

    Article • January 2018, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  39. Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential

    Article • Biomacromolecules, September 2017, American Chemical Society (ACS)

    Prof Jurgen Van Erps

  40. Optofluidic Chip for Single-Beam Optical Trapping of Particles Enabling Confocal Raman Measurements

    Article • IEEE Journal of Selected Topics in Quantum Electronics, March 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  41. Prototyping and Replication of Polymer Freeform Optical Components

    Article • January 2017, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  42. Fabrication of micro-pillar arrays

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, December 2016, Elsevier

    Prof Jurgen Van Erps

  43. Low-Loss Millimeter-Length Waveguides and Grating Couplers in Single-Crystal Diamond

    Article • Journal of Lightwave Technology, December 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  44. Deep proton writing with 12 MeV protons for rapid prototyping of microstructures in polymethylmethacrylate

    Article • Journal of Micro/Nanolithography MEMS and MOEMS, October 2016, SPIE

    Prof Jurgen Van Erps

  45. Negative Kerr Nonlinearity of Graphene as seen via Chirped-Pulse-Pumped Self-Phase Modulation

    Article • Physical Review Applied, October 2016, American Physical Society (APS)

    Prof Jurgen Van Erps

  46. Novel microfluidic devices for Raman spectroscopy and optical trapping

    Article • September 2016, SPIE

    Prof Jurgen Van Erps

  47. Hot-embossing replication of self-centering optical fiber alignment structures prototyped by deep proton writing

    Article • Optical Engineering, July 2016, SPIE

    Prof Jurgen Van Erps

  48. Proof-of-concept demonstration of free-form optics enhanced confocal Raman spectroscopy in combination with optofluidic lab-on-chip

    Article • July 2016, SPIE

    Prof Jurgen Van Erps

  49. Patterning of graphene on silicon-on-insulator waveguides through laser ablation and plasma etching

    Article • May 2016, SPIE

    Prof Jurgen Van Erps

  50. Design and prototyping of self-centering optical single-mode fiber alignment structures

    Article • Journal of Micromechanics and Microengineering, April 2016, Institute of Physics Publishing

    Prof Jurgen Van Erps

  51. Plasma treatment of fiber facets for increased (de)mating endurance in physical contact fiber connectors

    Article • April 2016, SPIE

    Prof Jurgen Van Erps

  52. Replication of self-centering optical fiber alignment structures using hot embossing

    Article • April 2016, SPIE

    Prof Jurgen Van Erps

  53. Dual fiber optical trapping in a polymer-based microfluidic chip

    Article • April 2016, SPIE

    Prof Jurgen Van Erps

  54. Indirect Rapid Prototyping: Opening Up Unprecedented Opportunities in Scaffold Design and Applications

    Article • Annals of Biomedical Engineering, April 2016, Springer Science + Business Media

    Prof Jurgen Van Erps

  55. Relation between optical non-contact profilometry and AFM roughness parameters on coated papers with oil-filled nanoparticles

    Article • Measurement, March 2016, Elsevier

    Prof Jurgen Van Erps

  56. Optofluidic multi-measurement system for the online monitoring of lubricant oil

    Article • Measurement Science and Technology, November 2015, Institute of Physics Publishing

    Prof Jurgen Van Erps

  57. Mass-manufacturable polymer microfluidic device for dual fiber optical trapping

    Article • Optics Express, November 2015, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  58. Laser ablation- and plasma etching-based patterning of graphene on silicon-on-insulator waveguides

    Article • Optics Express, October 2015, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  59. Indirect additive manufacturing as an elegant tool for the production of self-supporting low density gelatin scaffolds

    Article • Journal of Materials Science Materials in Medicine, September 2015, Springer Science + Business Media

    Prof Jurgen Van Erps

  60. Flow-cytometric identification of vinegars using a multi-parameter analysis optical detection module

    Article • September 2015, SPIE

    Prof Jurgen Van Erps

  61. Modeling and design of a multichannel chromatic aberration compensated imaging system

    Article • September 2015, SPIE

    Prof Jurgen Van Erps

  62. Specular gloss versus surface topography for oil-filled nanoparticle coatings on paper

    Article • Color Research & Application, August 2015, Wiley

    Prof Jurgen Van Erps

  63. Photonics-enhanced polymer labs-on-chips

    Article • SPIE Newsroom, August 2015, SPIE

    Prof Jurgen Van Erps

  64. Free-Form Optics Enhanced Confocal Raman Spectroscopy for Optofluidic Lab-on-Chips

    Article • IEEE Journal of Selected Topics in Quantum Electronics, July 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  65. Mould insert fabrication of a single-mode fibre connector alignment structure optimized by justified partial metallization

    Article • Journal of Micromechanics and Microengineering, February 2015, Institute of Physics Publishing

    Prof Jurgen Van Erps

  66. Optomechanical design of a buckling cavity in a low-cost high-performance ferruleless field-installable single-mode fiber connector

    Article • Optical Engineering, October 2014, SPIE

    Prof Jurgen Van Erps

  67. Proof-of-concept demonstration of a miniaturized multi-resolution refocusing imaging system using an electrically tunable lens

    Article • September 2014, SPIE

    Prof Jurgen Van Erps

  68. Optical Time-Domain Reflectometry Simulations of Passive Optical Networks: A Linear Time-Invariant System Approach for Arbitrary Pulses

    Article • Journal of Lightwave Technology, September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  69. Total internal reflection–based module for fluorescence and absorbance detection

    Article • Journal of Micro/Nanolithography MEMS and MOEMS, July 2014, SPIE

    Prof Jurgen Van Erps

  70. Exploration and classification of chromatographic fingerprints as additional tool for identification and quality control of several Artemisia species

    Article • Journal of Pharmaceutical and Biomedical Analysis, July 2014, Elsevier

    Prof Jurgen Van Erps

  71. Two-channel multiresolution refocusing imaging system using a tunable liquid lens

    Article • Applied Optics, June 2014, Optical Society of America (OSA)

    Lien Smeesters, Prof Jurgen Van Erps

  72. Proof-of-concept demonstration of a miniaturized three-channel multiresolution imaging system

    Article • May 2014, SPIE

    Prof Jurgen Van Erps

  73. Self-centering fiber alignment structures for high-precision field installable single-mode fiber connectors

    Article • May 2014, SPIE

    Prof Jurgen Van Erps

  74. Proof-of-concept demonstration of a total internal reflection based module for fluorescence and absorbance detection using a 3D-printed syringe pump

    Article • May 2014, SPIE

    Prof Jurgen Van Erps

  75. Design of large scale plasmonic nanoslit arrays for arbitrary mode conversion and demultiplexing

    Article • May 2014, SPIE

    Prof Jurgen Van Erps

  76. Opto-mechanical design of a buckling cavity in a novel high-performance outside-plant robust field installable single-mode fibre connector

    Article • May 2014, SPIE

    Prof Jurgen Van Erps

  77. Advanced simulation tool for optical time-domain reflectometry (OTDR) with arbitrary pulse shapes

    Article • May 2014, SPIE

    Prof Jurgen Van Erps

  78. Design of large scale plasmonic nanoslit arrays for arbitrary mode conversion and demultiplexing

    Article • Optics Express, January 2014, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  79. Low-coherence interferometry with polynomial interpolation on Compute Unified Device Architecture-enabled graphics processing units

    Article • Optical Engineering, September 2013, SPIE

    Prof Jurgen Van Erps

  80. Demonstration of a multichannel, multiresolution imaging system

    Article • Applied Optics, August 2013, Optical Society of America (OSA)

    Prof Jurgen Van Erps

  81. Deep Proton Writing for the rapid prototyping of polymer micro-components for optical interconnects and optofluidics

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, July 2013, Elsevier

    Prof Jurgen Van Erps

  82. Energy-per-bit and noise limits in plasmonic intergrated photodetectors

    Article • May 2013, SPIE

    Prof Jurgen Van Erps

  83. Energy-per-Bit Limits in Plasmonic Integrated Photodetectors

    Article • IEEE Journal of Selected Topics in Quantum Electronics, March 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  84. B-CALM: AN OPEN-SOURCE MULTI-GPU-BASED 3D-FDTD WITH MULTI-POLE DISPERSION FOR PLASMONICS

    Article • Progress In Electromagnetics Research, January 2013, EMW Publishing

    Prof Jurgen Van Erps

  85. Similarity analyses of chromatographic fingerprints as tools for identification and quality control of green tea

    Article • Journal of Chromatography B, December 2012, Elsevier

    Prof Jurgen Van Erps

  86. Design and fabrication of advanced fiber alignment structures for field-installable fiber connectors

    Article • June 2012, SPIE

    Prof Jurgen Van Erps

  87. Multi-order, automatic dispersion compensation for 1.28 Terabaud signals

    Article • June 2012, SPIE

    Prof Jurgen Van Erps

  88. Photonically enhanced polymer labs-on-a-chip

    Article • June 2012, SPIE

    Prof Jurgen Van Erps

  89. Photonic-Chip-Based Ultrafast Waveform Analysis and Optical Performance Monitoring

    Article • IEEE Journal of Selected Topics in Quantum Electronics, March 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  90. Rapid prototyping of interfacing microcomponents for printed circuit board-level optical interconnects

    Article • February 2012, SPIE

    Prof Jurgen Van Erps

  91. Ultrathin Optoelectronic Device Packaging in Flexible Carriers

    Article • IEEE Journal of Selected Topics in Quantum Electronics, May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Krassimir Panajotov, Prof Jurgen Van Erps

  92. OSNR Monitoring of a 1.28 Tbaud Signal by Interferometry Inside a Wavelength-Selective Switch

    Article • Journal of Lightwave Technology, May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  93. Paper coatings with multi-scale roughness evaluated at different sampling sizes

    Article • Applied Surface Science, April 2011, Elsevier

    Prof Jurgen Van Erps

  94. Design and Tolerance Analysis of Out-of-Plane Coupling Components for Printed-Circuit-Board-Level Optical Interconnections

    Article • IEEE Journal of Selected Topics in Quantum Electronics, September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  95. Deep proton writing: a powerful rapid prototyping technology for various micro-optical components

    Article • April 2010, SPIE

    Prof Jurgen Van Erps

  96. Design and fabrication of embedded micro-mirror inserts for out-of-plane coupling in PCB-level optical interconnections

    Article • April 2010, SPIE

    Prof Jurgen Van Erps

  97. High density optical pressure sensor foil based on arrays of crossing flexible waveguides

    Article • April 2010, SPIE

    Prof Jurgen Van Erps

  98. Optical interconnects for satellite payloads: overview of the state-of-the-art

    Article • April 2010, SPIE

    Prof Jurgen Van Erps

  99. Optical sampling of ultrahigh bitrate signals using highly nonlinear chalcogenide planar waveguides or tapered fibers

    Article • April 2010, SPIE

    Prof Jurgen Van Erps

  100. Populating multi-fiber fiberoptic connectors using an interferometric measurement of fiber tip position and facet quality

    Article • April 2010, SPIE

    Prof Jurgen Van Erps

  101. High-Resolution Optical Sampling of 640-Gb/s Data Using Four-Wave Mixing in Dispersion-Engineered Highly Nonlinear As$_2$S$_3$ Planar Waveguides

    Article • Journal of Lightwave Technology, January 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  102. High-resolution optical sampling of 640 Gbit/s data using dispersion-engineered chalcogenide photonic wire

    Article • Electronics Letters, January 2010, the Institution of Engineering and Technology (the IET)

    Prof Jurgen Van Erps

  103. In Situ Interferometric Monitoring of Fiber Insertion in Fiber Connector Components

    Article • IEEE Photonics Technology Letters, January 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  104. High-resolution optical sampling of 640-Gb/s signals using highly nonlinear chalcogenide waveguides

    Article • October 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  105. High-resolution optical sampling by means of dispersionshifted highly nonlinear chalcogenide waveguides

    Article • July 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  106. MT-compatible interface between peripheral fiber ribbons and printed circuit board-integrated optical waveguides

    Article • February 2009, SPIE

    Prof Jurgen Van Erps

  107. Embedded Micromirror Inserts for Optical Printed Circuit Boards

    Article • IEEE Photonics Technology Letters, October 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  108. Hot Embossing of Microoptical Components Prototyped by Deep Proton Writing

    Article • IEEE Photonics Technology Letters, September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  109. Interferometric method for in-situ monitoring of fiber insertion in 2D fiber connectors fabricated through Deep Proton Writing

    Article • August 2008, SPIE

    Prof Jurgen Van Erps

  110. Characterization of the optical parameters of high aspect ratio polymer micro-optical components

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  111. A low loss 180 degrees coupling fiber socket making use of low bending loss hole-assisted fiber

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  112. Coupling structures for out-of-plane coupling in optical PCBs

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  113. Enhanced pluggable out-of-plane coupling components for printed circuit board-level optical interconnections

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  114. Fabrication method to create high-aspect ratio pillars for photonic coupling of board level interconnects

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  115. Replication of deep micro-optical components prototyped by Deep Proton Writing

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  116. Replication of micro-optical components and nano-structures for mass production

    Article • April 2008, SPIE

    Prof Jurgen Van Erps

  117. Mass Manufacturable 180$^{\circ}$-Bend Single-Mode Fiber Socket Using Hole-Assisted Low Bending Loss Fiber

    Article • IEEE Photonics Technology Letters, February 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  118. Discrete Out-of-Plane Coupling Components for Printed Circuit Board-Level Optical Interconnections

    Article • IEEE Photonics Technology Letters, November 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  119. Tolerance Analysis for Multilayer Optical Interconnections Integrated on a Printed Circuit Board

    Article • Journal of Lightwave Technology, September 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  120. Laser Ablated Micromirrors for Printed Circuit Board Integrated Optical Interconnections

    Article • IEEE Photonics Technology Letters, June 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Jurgen Van Erps

  121. Sensing applications of photonic crystal fibres

    Article • April 2007, SPIE

    Prof Jurgen Van Erps

  122. SPAD arrays and micro-optics: towards a real single photon spectrometer

    Article • Journal of Modern Optics, January 2007, Taylor & Francis

    Prof Jurgen Van Erps, Paolo Finocchiaro

  123. Elastomeric inverse moulding and vacuum casting process characterization for the fabrication of arrays of concave refractive microlenses

    Article • Journal of Micromechanics and Microengineering, December 2006, Institute of Physics Publishing

    Prof Jurgen Van Erps

  124. A new generation of low-voltage single-photon micro-sensors with timing capability

    Article • Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, November 2006, Elsevier

    Prof Jurgen Van Erps, Paolo Finocchiaro

  125. AFM benchmark for the profile characterisation of subwavelength diffractive elements within the EC Network of Excellence on Micro-Optics (NEMO)

    Article • April 2006, SPIE

    Prof Jurgen Van Erps

  126. Laser-ablated coupling structures for stacked optical interconnections on printed circuit boards

    Article • April 2006, SPIE

    Prof Jurgen Van Erps

  127. Deep lithography with protons to prototype pluggable micro-optical out-of-plane coupling structures for multimode waveguides

    Article • September 2005, SPIE

    Prof Jurgen Van Erps

  128. A single photon spectrometer for biomedical applications

    Article • June 2005, SPIE

    Prof Jurgen Van Erps