All Stories

  1. Finding the order in complexity: The electronic structure of 14-1-11 zintl compounds
  2. Probing the phonon mean free paths in dislocation core by molecular dynamics simulation
  3. Titanium-based thin film metallic glass as diffusion barrier layer for PbTe-based thermoelectric modules
  4. Interfaces in energy materials
  5. A valence balanced rule for discovery of 18-electron half-Heuslers with defects
  6. Band engineering in Mg3Sb2 by alloying with Mg3Bi2 for enhanced thermoelectric performance
  7. Grain boundary dominated charge transport in Mg3Sb2-based compounds
  8. Impact of Ni content on the thermoelectric properties of half-Heusler TiNiSn
  9. Minimum thermal conductivity in the context of diffuson-mediated thermal transport
  10. Observation of valence band crossing: the thermoelectric properties of CaZn2Sb2–CaMg2Sb2 solid solution
  11. Determining ideal strength and failure mechanism of thermoelectric CuInTe2 through quantum mechanics
  12. Optimization principles and the figure of merit for triboelectric generators
  13. Effective mass and Fermi surface complexity factor from ab initio band structure calculations
  14. Deformation mechanisms in high-efficiency thermoelectric layered Zintl compounds
  15. Enhancing the thermoelectric performance of SnSe1−xTex nanoplates through band engineering
  16. Figure of merit ZT of a thermoelectric device defined from materials properties
  17. Metal phosphides as potential thermoelectric materials
  18. Skutterudite with graphene-modified grain-boundary complexion enhances zT enabling high-efficiency thermoelectric device
  19. SnO as a potential oxide thermoelectric candidate
  20. Improved mechanical properties of thermoelectric (Bi0.2Sb0.8)2Te3by nanostructuring
  21. Thermoelectric performance of co-doped SnTe with resonant levels
  22. Engineering half-Heusler thermoelectric materials using Zintl chemistry
  23. Erratum: “Band gap estimation from temperature dependent Seebeck measurement—Deviations from the 2e|S|maxTmax relation” [Appl. Phys. Lett. 106, 022112 (2015)]
  24. ZnSb Polymorphs with Improved Thermoelectric Properties
  25. n-Type Bi2Te3–xSexNanoplates with Enhanced Thermoelectric Efficiency Driven by Wide-Frequency Phonon Scatterings and Synergistic Carrier Scatterings
  26. Erratum: “Temperature dependent band gap in PbX (X = S, Se, Te)” [Appl. Phys. Lett. 103, 262109 (2013)]
  27. Thinking Like a Chemist: Intuition in Thermoelectric Materials
  28. p-Type Co Interstitial Defects in Thermoelectric Skutterudite CoSb3Due to the Breakage of Sb4-Rings
  29. Apparent critical phenomena in the superionic phase transition of Cu 2- x Se
  30. YCuTe2: a member of a new class of thermoelectric materials with CuTe4-based layered structure
  31. Understanding thermoelectric properties from high-throughput calculations: trends, insights, and comparisons with experiment
  32. Enhanced thermoelectric properties of the Zintl phase BaGa2Sb2via doping with Na or K
  33. Dislocation strain as the mechanism of phonon scattering at grain boundaries
  34. Calculation of dopant solubilities and phase diagrams of X–Pb–Se (X = Br, Na) limited to defects with localized charge
  35. Atomistic explanation of brittle failure of thermoelectric skutterudite CoSb3
  36. Enhanced ideal strength of thermoelectric half-Heusler TiNiSn by sub-structure engineering
  37. Enhanced thermoelectric performance in rare-earth filled-skutterudites
  38. Lead-free tin chalcogenide thermoelectric materials
  39. Thermal stability of Mg2Si0.4Sn0.6 in inert gases and atomic-layer-deposited Al2O3 thin film as a protective coating
  40. The Influence of Weak Tin Doping on the Thermoelectric Properties of Zinc Antimonide
  41. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe
  42. High Thermoelectric Performance SnTe–In 2 Te 3 Solid Solutions Enabled by Resonant Levels and Strong Vacancy Phonon Scattering
  43. Coinage-Metal-Stuffed Eu 9 Cd 4 Sb 9 : Metallic Compounds with Anomalous Low Thermal Conductivities
  44. Influence of Compensating Defect Formation on the Doping Efficiency and Thermoelectric Properties of Cu 2-y Se 1– x Br x
  45. Brittle Failure Mechanism in Thermoelectric Skutterudite CoSb 3
  46. Segmented Thermoelectric Oxide-Based Module for High-Temperature Waste Heat Harvesting
  47. Measuring anisotropic resistivity of single crystals using the van der Pauw technique
  48. Electronic structure and thermoelectric properties of pnictogen-substituted ASn1.5Te1.5 (A = Co, Rh, Ir) skutterudites
  49. Solubility design leading to high figure of merit in low-cost Ce-CoSb3 skutterudites
  50. State of the art Ag50-xSbxSe50-yTey alloys: Their high zT values, microstructures and related phase equilibria
  51. Silver as a highly effective bonding layer for lead telluride thermoelectric modules assembled by rapid hot-pressing
  52. Liquidus projection and isothermal section at 650°C of ternary Co–Sb–Ga system
  53. High performance p-type segmented leg of misfit-layered cobaltite and half-Heusler alloy
  54. Ab initio study of intrinsic point defects in PbTe: an insight into phase stability
  55. Ultrahigh Thermoelectric Performance in Mosaic Crystals
  56. Origin of resistivity anomaly in p-type leads chalcogenide multiphase compounds
  57. Interfacial reactions in Ni/CoSb3 couples at 450°C
  58. Flexible n-type thermoelectric materials by organic intercalation of layered transition metal dichalcogenide TiS2
  59. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
  60. Characterization of Lorenz number with Seebeck coefficient measurement
  61. Thermoelectric Enhancement in BaGa 2 Sb 2 by Zn Doping
  62. Nanostructuring of Undoped ZnSb by Cryo-Milling
  63. Enhanced Thermoelectric Properties in Bulk Nanowire Heterostructure-Based Nanocomposites through Minority Carrier Blocking
  64. The Co-Sb-Ga System: Isoplethal Section and Thermodynamic Modeling
  65. The Effects of Te2−and I−Substitutions on the Electronic Structures, Thermoelectric Performance, and Hardness in Melt-Quenched Highly Dense Cu2-xSe
  66. High temperature transport properties of BaZn2Sn2
  67. Comparison of Thermoelectric Transport Measurement Techniques Using n-type PbSe
  68. Bonding and high-temperature reliability of NiFeMo alloy/n-type PbTe joints for thermoelectric module applications
  69. Band gap estimation from temperature dependent Seebeck measurement—Deviations from the 2e|S|maxTmax relation
  70. Resolving the true band gap of ZrNiSn half-Heusler thermoelectric materials
  71. Measuring thermoelectric transport properties of materials
  72. Thermoelectric properties of the Zintl phases Yb5M2Sb6(M = Al, Ga, In)
  73. Higher mobility in bulk semiconductors by separating the dopants from the charge-conducting band – a case study of thermoelectric PbSe
  74. High thermoelectric and mechanical performance in highly dense Cu2−xS bulks prepared by a melt-solidification technique
  75. Enhanced thermoelectric properties of Sr5In2Sb6via Zn-doping
  76. Demonstration of a phonon-glass electron-crystal strategy in (Hf,Zr)NiSn half-Heusler thermoelectric materials by alloying
  77. Unileg Thermoelectric Generator Design for Oxide Thermoelectrics and Generalization of the Unileg Design Using an Idealized Metal
  78. Thermoelectric properties and electronic structure of the Zintl phase Sr5In2Sb6and the Ca5−xSrxIn2Sb6solid solution
  79. Thermoelectric transport properties of diamond-like Cu1−xFe1+xS2 tetrahedral compounds
  80. Mechanically Robust BiSbTe Alloys with Superior Thermoelectric Performance: A Case Study of Stable Hierarchical Nanostructured Thermoelectric Materials
  81. The intrinsic disorder related alloy scattering in ZrNiSn half-Heusler thermoelectric materials
  82. Thermoelectric performance of tellurium-reduced quaternary p-type lead–chalcogenide composites
  83. Band convergence in the non-cubic chalcopyrite compounds Cu2MGeSe4
  84. Determining conductivity and mobility values of individual components in multiphase composite Cu1.97Ag0.03Se
  85. Nonstoichiometry in the Zintl Phase Yb 1−δ Zn 2 Sb 2 as a Route to Thermoelectric Optimization
  86. Thermoelectric properties of the Ca5Al2−xInxSb6solid solution
  87. Composition Modulation of Ag 2 Te Nanowires for Tunable Electrical and Thermal Properties
  88. Thermoelectric Transport in Cu 7 PSe 6 with High Copper Ionic Mobility
  89. Interfacial Reaction Between Nb Foil and n-Type PbTe Thermoelectric Materials During Thermoelectric Contact Fabrication
  90. High Band Degeneracy Contributes to High Thermoelectric Performance in p-Type Half-Heusler Compounds
  91. Thermoelectric Performance of n -Type (PbTe) 0.75 (PbS) 0.15 (PbSe) 0.1 Composites
  92. Thermoelectric properties of indium doped PbTe1-ySeyalloys
  93. Nanostructures in Te/Sb/Ge/Ag (TAGS) Thermoelectric Materials Induced by Phase Transitions Associated with Vacancy Ordering
  94. Thermoelectric Properties and Microstructure Studies of Spinodally Decomposed PbTe0.38S0.62 Alloy
  95. Thermochemistry, Morphology, and Optical Characterization of Germanium Allotropes
  96. Optimum Carrier Concentration in n-Type PbTe Thermoelectrics
  97. Linear dependence of the Hall coefficient of 1% Na doped PbTe with varying magnetic field
  98. Elemental tellurium as a chiral p -type thermoelectric material
  99. High Thermoelectric Performance in Non‐Toxic Earth‐Abundant Copper Sulfide
  100. Response to “Comment on ‘Effective thermal conductivity in thermoelectric materials’” [J. Appl. Phys. 113, 204904 (2013)]
  101. Defect-Controlled Electronic Properties inAZn2Sb2Zintl Phases
  102. Transport properties and valence band feature of high-performance (GeTe) 85 (AgSbTe 2 ) 15 thermoelectric materials
  103. High-Temperature Thermoelectric Properties of the Solid–Solution Zintl Phase Eu11Cd6Sb12–xAsx (x < 3)
  104. Chemical composition tuning in quaternary p-type Pb-chalcogenides – a promising strategy for enhanced thermoelectric performance
  105. Tuning bands of PbSe for better thermoelectric efficiency
  106. Phase diagram of In–Co–Sb system and thermoelectric properties of In-containing skutterudites
  107. Thermoelectric properties and electronic structure of the Zintl phase Sr5Al2Sb6
  108. A new crystal: layer-structured rhombohedral In3Se4
  109. Bond strength dependent superionic phase transformation in the solid solution series Cu2ZnGeSe4−xSx
  110. TAGS-related indium compounds and their thermoelectric properties – the solid solution series (GeTe)xAgInySb1−yTe2 (x = 1–12; y = 0.5 and 1)
  111. Thermoelectric alloys between PbSe and PbS with effective thermal conductivity reduction and high figure of merit
  112. Thermoelectric properties of the Yb9Mn4.2−xZnxSb9solid solutions
  113. Thermoelectric properties of p-type polycrystalline SnSe doped with Ag
  114. Optimization of the carrier concentration in phase-separated half-Heusler compounds
  115. Thermoelectric properties of Sn-doped p-type Cu3SbSe4: a compound with large effective mass and small band gap
  116. Optimization of thermoelectric efficiency in SnTe: the case for the light band
  117. A High-temperature, High-efficiency Solar Thermoelectric Generator Prototype
  118. Temperature dependent band gap in PbX (X = S, Se, Te)
  119. Silicon-Based Thermoelectrics Made from a Boron-Doped Silicon Dioxide Nanocomposite
  120. Effect of Isovalent Substitution on the Thermoelectric Properties of the Cu2ZnGeSe4–xSx Series of Solid Solutions
  121. Applying Quantitative Microstructure Control in Advanced Functional Composites
  122. Towards high efficiency segmented thermoelectric unicouples
  123. Bonding and interfacial reaction between Ni foil and n-type PbTe thermoelectric materials for thermoelectric module applications
  124. Phase transition enhanced thermoelectric figure-of-merit in copper chalcogenides
  125. Electron and phonon transport in Co-doped FeV0.6Nb0.4Sb half-Heusler thermoelectric materials
  126. INFLUENCE OF THE CHEMICAL POTENTIAL ON THE CARRIER EFFECTIVE MASS IN THE THERMOELECTRIC SOLID SOLUTION Cu 2 Zn 1-x Fe x GeSe 4
  127. Enhanced thermoelectric performance in the very low thermal conductivity Ag2Se0.5Te0.5
  128. Thermoelectric Properties and Electronic Structure of the Zintl-Phase Sr3AlSb3
  129. Characteristics of lattice thermal conductivity and carrier mobility of undoped PbSe-PbS solid solutions
  130. The microstructure, liquidus projection and thermodynamic modeling of thermoelectric Ag–Pb–Te system
  131. Optical band gap and the Burstein–Moss effect in iodine doped PbTe using diffuse reflectance infrared Fourier transform spectroscopy
  132. Validity of rigid band approximation of PbTe thermoelectric materials
  133. T-Shaped Bi2Te3–Te Heteronanojunctions: Epitaxial Growth, Structural Modeling, and Thermoelectric Properties
  134. Effective thermal conductivity in thermoelectric materials
  135. Analytical and numerical parameter extraction for compact modeling of thermoelectric coolers
  136. Low Electron Scattering Potentials in High Performance Mg2Si0.45Sn0.55 Based Thermoelectric Solid Solutions with Band Convergence
  137. Beneficial Contribution of Alloy Disorder to Electron and Phonon Transport in Half‐Heusler Thermoelectric Materials
  138. The self-compatibility effect in graded thermoelectric cooler elements
  139. Phase Characterization, Thermal Stability, High-Temperature Transport Properties, and Electronic Structure of Rare-Earth Zintl Phosphides Eu3M2P4 (M = Ga, In)
  140. Chemical Stability of (Ag,Cu)2Se: a Historical Overview
  141. Thermal Management Optimization of a Thermoelectric-Integrated Methanol Evaporator Using a Compact CFD Modeling Approach
  142. Charge‐Compensated Compound Defects in Ga‐containing Thermoelectric Skutterudites
  143. Atomic-Scale Interfacial Structure in Rock Salt and Tetradymite Chalcogenide Thermoelectric Materials
  144. Phonon Scattering through a Local Anisotropic Structural Disorder in the Thermoelectric Solid Solution Cu2Zn1–xFexGeSe4
  145. Thermoelectric properties of Zn-doped Ca5In2Sb6
  146. Evaluating the potential for high thermoelectric efficiency of silver selenide
  147. Improved thermoelectric properties in Zn-doped Ca5Ga2Sb6
  148. Rational design of p-type thermoelectric PbTe: temperature dependent sodium solubility
  149. Measurement of the electrical resistivity and Hall coefficient at high temperatures
  150. High Thermoelectric Efficiency of n‐type PbS
  151. The Criteria for Beneficial Disorder in Thermoelectric Solid Solutions
  152. Band Engineering of Thermoelectric Materials
  153. Reduced thermal conductivity in Pb-alloyed AgSbTe2 thermoelectric materials
  154. Hot pressing and nanostructuring of Bi90Sb10 alloys to concurrently improve mechanical and thermoelectric properties
  155. Synthesis, Structural Characterization, and Physical Properties of the Type-I Clathrates A 8 Zn 18 As 28 ( A = K, Rb, Cs) and Cs 8 Cd 18 As 28
  156. Thermopower enhancement in Pb1−xMnxTe alloys and its effect on thermoelectric efficiency
  157. Dopants effect on the band structure of PbTe thermoelectric material
  158. A Mesoporous Anisotropic n‐Type Bi2Te3 Monolith with Low Thermal Conductivity as an Efficient Thermoelectric Material
  159. Ternary eutectic growth of nanostructured thermoelectric Ag-Pb-Te materials
  160. Improved thermoelectric cooling based on the Thomson effect
  161. Increased electrical conductivity in fine-grained (Zr,Hf)NiSn based thermoelectric materials with nanoscale precipitates
  162. Thermoelectric properties of Zn5Sb4In2-δ (δ = 0.15)
  163. Rapid Microwave Preparation of Thermoelectric TiNiSn and TiCoSb Half-Heusler Compounds
  164. Chalcopyrite CuGaTe2: A High‐Efficiency Bulk Thermoelectric Material
  165. Influence of the Triel Elements ( M = Al, Ga, In) on the Transport Properties of Ca 5 M 2 Sb 6 Zintl Compounds
  166. Formation of highly oriented large nanoscale In2Te3 precipitates in bulk Bi2Te3
  167. Weak electron–phonon coupling contributing to high thermoelectric performance in n-type PbSe
  168. Nanostructuring of Thermoelectric Mg2Si via a Nonequilibrium Intermediate State
  169. Influence of a Nano Phase Segregation on the Thermoelectric Properties of the p-Type Doped Stannite Compound Cu2+xZn1–xGeSe4
  170. Scanning Seebeck Coefficient Measurement System for Homogeneity Characterization of Bulk and Thin-Film Thermoelectric Materials
  171. High Thermoelectric Figure of Merit in PbTe Alloys Demonstrated in PbTe–CdTe
  172. Copper ion liquid-like thermoelectrics
  173. Waste Heat Recovery from a Marine Waste Incinerator Using a Thermoelectric Generator
  174. Thermoelectric Properties of Mn-Doped Ca5Al2Sb6
  175. Cu2ZnGeSe4 Nanocrystals: Synthesis and Thermoelectric Properties
  176. Formation of ordered nano-wire microstructures in thermoelectric Pb–Ag–Sb–Te
  177. Thermoelectric properties of Sr3GaSb3 – a chain-forming Zintl compound
  178. Low effective mass leading to high thermoelectric performance
  179. Concentrated solar thermoelectric generators
  180. Thermoelectric properties of Zn-doped Ca3AlSb3
  181. A combinatorial approach to microstructure and thermopower of bulk thermoelectric materials: the pseudo-ternary PbTe–Ag2Te–Sb2Te3 system
  182. Interfacial disconnections at Sb2Te3 precipitates in PbTe: Mechanisms of strain accommodation and phase transformation at a tetradymite/rocksalt telluride interface
  183. Stabilizing the Optimal Carrier Concentration for High Thermoelectric Efficiency
  184. Solubility and microstructure in the pseudo-binary PbTe–Ag2Te system
  185. A weak compatibility condition for precipitation with application to the microstructure of PbTe–Sb2Te3 thermoelectrics
  186. Doping of p-type ZnSb: Single parabolic band model and impurity band conduction
  187. Thermodynamics of Thermoelectric Phenomena and Applications
  188. Zone Leveling Crystal Growth of Thermoelectric PbTe Alloys with Sb2Te3 Widmanstätten Precipitates
  189. Maximum performance in self-compatible thermoelectric elements
  190. Predicted Electronic and Thermodynamic Properties of a Newly Discovered Zn 8 Sb 7 Phase
  191. Crystal structure, characterization and thermoelectric properties of the type-I clathrate Ba8−ySryAl14Si32 (0.6≤y≤1.3) prepared by aluminum flux
  192. Convergence of electronic bands for high performance bulk thermoelectrics
  193. Phase stability and chemical composition dependence of the thermoelectric properties of the type-I clathrate Ba8AlxSi46−x (8≤x≤15)
  194. Size control of Sb2Te3 Widmanstätten precipitates in thermoelectric PbTe
  195. Nanostructuring in β-Zn4 Sb3 with variable starting Zn compositions
  196. Surfactant-Free Synthesis of Bi2Te3−Te Micro−Nano Heterostructure with Enhanced Thermoelectric Figure of Merit
  197. Self‐Tuning the Carrier Concentration of PbTe/Ag2Te Composites with Excess Ag for High Thermoelectric Performance
  198. Heavily Doped p‐Type PbSe with High Thermoelectric Performance: An Alternative for PbTe
  199. Solubility and formation of ternary Widmanstätten precipitates in PbTe in the pseudo-binary PbTe–Bi2Te3 system
  200. Direct tuning of electrical properties in nano-structured Bi2Se0.3Te2.7 by reversible electrochemical lithium reactions
  201. Combination of large nanostructures and complex band structure for high performance thermoelectric lead telluride
  202. Optimized thermoelectric properties of Mo3Sb7−xTex with significant phonon scattering by electrons
  203. Ca3AlSb3: an inexpensive, non-toxic thermoelectric material for waste heat recovery
  204. Reevaluation of PbTe1−xIx as high performance n-type thermoelectric material
  205. High thermoelectric figure of merit in heavy hole dominated PbTe
  206. Phonon engineering through crystal chemistry
  207. Mechanochemical synthesis and thermoelectric properties of high quality magnesium silicide
  208. Alloying to increase the band gap for improving thermoelectric properties of Ag2Te
  209. High Thermoelectric Performance in PbTe Due to Large Nanoscale Ag2Te Precipitates and La Doping
  210. High-resolution nanostructural investigation of Zn4Sb3 alloys
  211. The Zintl Compound Ca5Al2Sb6 for Low‐Cost Thermoelectric Power Generation
  212. Power-related compatibility and maximum electrical power output of a thermogenerator
  213. Effect of Ca Doping on the Thermoelectric Performance of Yb14MnSb11
  214. Optimizing Thermoelectric Efficiency in La3−xTe4 via Yb Substitution
  215. The compatibility approach in the classical theory of thermoelectricity seen from the perspective of variational calculus
  216. Microstructure Size Control through Cooling Rate in Thermoelectric PbTe-Sb2Te3 Composites
  217. Electronic structure and transport in thermoelectric compounds AZn2Sb2 (A = Sr, Ca, Yb, Eu)
  218. Synthesis, structure, magnetism, and high temperature thermoelectric properties of Ge doped Yb14MnSb11
  219. Composition and the thermoelectric performance of β-Zn4Sb3
  220. High-Temperature Transport Properties of the Zintl Phases Yb11GaSb9 and Yb11InSb9
  221. Zintl Chemistry for Designing High Efficiency Thermoelectric Materials
  222. Interfaces in bulk thermoelectric materials
  223. Structure, Heat Capacity, and High-Temperature Thermal Properties of Yb 14 Mn 1− x Al x Sb 11
  224. In situ observation of eutectoid reaction forming a PbTe–Sb2Te3 thermoelectric nanocomposite by synchrotron X-ray diffraction
  225. Structure and high-temperature thermoelectric properties of SrAl2Si2
  226. Formation of Sb2Te3 Widmanstätten precipitates in thermoelectric PbTe
  227. Thermal Stability and Phase Purity in Polycrystalline Ba8Ga x Ge46−x
  228. Traversing the Metal‐Insulator Transition in a Zintl Phase: Rational Enhancement of Thermoelectric Efficiency in Yb14Mn1−xAlxSb11
  229. Evaluation of true interlamellar spacing from microstructural observations
  230. Synthesis, Structure, and High-Temperature Thermoelectric Properties of Boron-Doped Ba8Al14Si31 Clathrate I Phases
  231. Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
  232. Improved Thermoelectric Performance in Yb14Mn1−xZnxSb11 by the Reduction of Spin-Disorder Scattering
  233. What makes a good Thermoelectric Material in a simple, readable format for anyone new to the field
  234. Local structure of interstitial Zn in β-Zn4Sb3
  235. Compatibility factor for the power output of a thermogenerator
  236. Synthesis and thermoelectric properties of YbSb2Te4
  237. Synthesis, Structure, and High Temperature Thermoelectric Properties of Yb11Sb9.3Ge0.5
  238. Development and Evolution of Nanostructure in Bulk Thermoelectric Pb-Te-Sb Alloys
  239. High-temperature thermoelectric studies of A11Sb10 (A=Yb, Ca)
  240. Synthesis and thermoelectric properties of alloys
  241. Solidification processing of alloys in the pseudo-binary PbTe–Sb2Te3 system
  242. Antimony-121 Mössbauer Spectral Study of α-Zn 4 Sb 3
  243. Self-Assembled Nanometer Lamellae of Thermoelectric PbTe and Sb2Te3 with Epitaxy-like Interfaces
  244. Zintl phases for thermoelectric devices
  245. High temperature thermoelectric properties of Mo3Sb7−xTex for x=1.6 and 1.5
  246. Thermoelectric Properties and Microstructure of Ba 8 Al 14 Si 31 and EuBa 7 Al 13 Si 33
  247. Thermoelectric properties and microstructure of Mg3Sb2
  248. Thermoelectric and structural properties of a new Chevrel phase: Ti0.3Mo5RuSe8
  249. Yb14MnSb11:  New High Efficiency Thermoelectric Material for Power Generation
  250. Nonstoichiometry, Structure, and Electrical Properties of “SrPrO 3 ”
  251. Zintl Phases as Thermoelectric Materials: Tuned Transport Properties of the Compounds CaxYb1–xZn2Sb2
  252. Transient cooling of thermoelectric coolers and its applications for microdevices
  253. Solidification processing of Te-Sb-Pb alloys for thermoelectric applications
  254. Synchrotron X-ray structure refinement of Zn/sub 4/Sb/sub 3/
  255. Interstitial Zn Atoms Do the Trick in Thermoelectric Zinc Antimonide, Zn4Sb3: A Combined Maximum Entropy Method X‐ray Electron Density and Ab Initio Electronic Structure Study
  256. Disordered zinc in Zn4Sb3 with phonon-glass and electron-crystal thermoelectric properties
  257. Multistage thermoelectric microcoolers
  258. Application of the compatibility factor to the design of segmented and cascaded thermoelectric generators
  259. Thermoelectric microdevice fabricated by a MEMS-like electrochemical process
  260. Direct Electrodeposition of Highly Dense 50 nm Bi 2 Te 3- y Se y Nanowire Arrays
  261. Supercooling of Peltier cooler using a current pulse
  262. Preparation and thermoelectric properties of CeFe4As12
  263. Thermoelectric Properties of Chalcogenides with the Spinel Structure
  264. Thermoelectric properties of the incommensurate layered semiconductor GexNbTe2
  265. Thermoelectric, transport, and magnetic properties of the polaron semiconductor Fe x Cr 3 − x Se 4
  266. Preparation and thermoelectric properties of some phosphide skutterudite compounds
  267. Potential of Chevrel phases for thermoelectric applications
  268. Local structure, transport, and rare-earth magnetismin the ferrimagnetic perovskite Gd 0.67 Ca 0.33 MnO 3 s
  269. Magnetoconductivity and Hall effects in La0.67Ca0.33MnO3
  270. Anneal‐tunable Curie temperature and transport of La0.67Ca0.33MnO3
  271. Anomalous Spin Scattering Effects in the Badly Metallic Itinerant Ferromagnet SrRuO 3
  272. Intrinsic electrical transport and magnetic properties of La 0.67 Ca 0.33 Mn O 3 and La 0.67 Sr 0.33 Mn O 3 MOCVD thin films and bulk material
  273. The Infinite Chain Nitride Na5Ba3N. A One-Dimensional Void Metal?
  274. Refined Structure and Properties of the Layered Mott Insulator BaCoS2
  275. Reaction of alkali metal intercalated C60 with oxygen: Deintercalation, activation, and decomposition
  276. Discrete M6N Octahedra in the Subnitrides Na16 Ba6N and Ag16Ca6N: A Reconsideration of the Ag8Ca3 Structure Type
  277. Dalton communications. The crystal structure of NaBa, an interpenetrating network of sodium tetrahedra and barium octahedra
  278. Crystal structure of copper strontium (5/1), Cu5Sr
  279. Crystal structure of barium dihydride, BaH2
  280. Synthesis, structure, and properties of barium cobalt sulfide (Ba6Co25S27) a perovskite-like superstructure of Co8S6 and Ba6S clusters
  281. Thermoelectric Energy Harvesting
  282. Compatibility of segmented thermoelectric generators
  283. The synthesis of CaZn/sub 2/Sb/sub 2/ and its thermoelectric properties
  284. Hot spot cooling using embedded thermoelectric coolers
  285. Thermoelectric properties of Nb/sub 3/Sb/sub x/Te/sub 7-x/ compounds
  286. Thermoelectric properties of n-type polycrystalline Bi/sub x/Sb/sub 2-x/Te/sub 3/ alloys
  287. A study of heat sink performance in air and soil for use in a thermoelectric energy harvesting device
  288. Testing of milliwatt power source components
  289. Effects of annealing electrodeposited bismuth telluride films
  290. Some properties of Re/sub 2/Te/sub 5/-based materials