Contact

All Stories

  1. An Object-Oriented R744 Two-Phase Ejector Reduced-Order Model for Dynamic Simulations

    Article • Energies, April 2019, MDPI AG

    Professor Andrzej J. Nowak

  2. Numerical Modelling of a Savonius Wind Turbine Using the URANS Turbulence Modelling Approach

    Article • January 2019, Springer Science + Business Media

    Professor Andrzej J. Nowak

  3. A gas ejector for CO2 supercritical cycles

    Article • Energy, November 2018, Elsevier

    Professor Andrzej J. Nowak

  4. Numerical investigation of heat transfer in a CO2 two-phase ejector

    Article • Energy, November 2018, Elsevier

    Professor Andrzej J. Nowak

  5. 7th European Thermal-Sciences Conference

    Article • Heat and Mass Transfer, July 2018, Springer Science + Business Media

    Professor Andrzej J. Nowak

  6. Performance improvement of the R744 two-phase ejector with an implemented suction nozzle bypass

    Article • International Journal of Refrigeration, June 2018, Elsevier

    Professor Andrzej J. Nowak

  7. Performance mapping of the R744 ejectors for refrigeration and air conditioning supermarket application: A hybrid reduced-order model

    Article • Energy, June 2018, Elsevier

    Professor Andrzej J. Nowak

  8. System model derivation of the CO2 two-phase ejector based on the CFD-based reduced-order model

    Article • Energy, February 2018, Elsevier

    Professor Andrzej J. Nowak

  9. Modified homogeneous relaxation model for the R744 trans-critical flow in a two-phase ejector

    Article • International Journal of Refrigeration, January 2018, Elsevier

    Professor Andrzej J. Nowak

  10. Multiphase simulation of blood flow within main thoracic arteries of 8-year-old child with coarctation of the aorta

    Article • Heat and Mass Transfer, August 2017, Springer Science + Business Media

    Professor Andrzej J. Nowak

  11. Guest editorial

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, May 2017, Emerald

    Professor Andrzej J. Nowak

  12. Preface

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, May 2017, Emerald

    Professor Andrzej J. Nowak

  13. Full-scale multi-ejector module for a carbon dioxide supermarket refrigeration system: Numerical study of performance evaluation

    Article • Energy Conversion and Management, April 2017, Elsevier

    Professor Andrzej J. Nowak

  14. Guest editorial

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, March 2017, Emerald

    Professor Andrzej J. Nowak

  15. Preface

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, March 2017, Emerald

    Professor Andrzej J. Nowak

  16. HEM and HRM accuracy comparison for the simulation of CO2 expansion in two-phase ejectors for supermarket refrigeration systems

    Article • Applied Thermal Engineering, March 2017, Elsevier

    Professor Andrzej J. Nowak

  17. Sensitivity analysis of the computational model of the coal carbonisation process

    Article • Applied Thermal Engineering, March 2017, Elsevier

    Professor Andrzej J. Nowak

  18. Shape optimisation of a two-phase ejector for CO 2 refrigeration systems

    Article • International Journal of Refrigeration, February 2017, Elsevier

    Professor Andrzej J. Nowak

  19. Performance of fixed geometry ejectors with a swirl motion installed in a multi-ejector module of a CO 2 refrigeration system

    Article • Energy, December 2016, Elsevier

    Professor Andrzej J. Nowak

  20. Virtual Therapy Simulation for Patient with Coarctation of Aorta Using CFD Blood Flow Modelling

    Article • October 2016, Springer Science + Business Media

    Professor Andrzej J. Nowak

  21. A comparison of homogeneous equilibrium and relaxation model for CO2 expansion inside the two-phase ejector

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  22. A modified homogeneous relaxation model for CO2 two-phase flow in vapour ejector

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  23. A thermoregulation model for hypothermic treatment of neonates

    Article • Medical Engineering & Physics, September 2016, Elsevier

    Professor Andrzej J. Nowak

  24. CFD analysis of multiphase blood flow within aorta and its thoracic branches of patient with coarctation of aorta using multiphase Euler - Euler approach

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  25. Dry heat loses of newborn baby in infant care bed: use of a thermal manikin

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  26. Parallel Work of CO2 Ejectors Installed in a Multi-Ejector Module of Refrigeration System

    Article • Journal of Physics Conference Series, September 2016, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  27. CFD analysis of the thermal behaviour of heating walls in a coke oven battery

    Article • International Journal of Thermal Sciences, June 2016, Elsevier

    Professor Andrzej J. Nowak

  28. CFD simulations of transport phenomena during transcritical flow of real fluid (CO2) within ejector

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, May 2016, Emerald

    Professor Andrzej J. Nowak, Dr Jacek Smolka

  29. Performance comparison of fixed- and controllable-geometry ejectors in a CO2 refrigeration system

    Article • International Journal of Refrigeration, May 2016, Elsevier

    Professor Andrzej J. Nowak

  30. Computational modelling of neonate’s brain cooling

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, March 2016, Emerald

    Professor Andrzej J. Nowak

  31. 3-D coupled CFD model of a periodic operation of a heating flue and coke ovens in a coke oven battery

    Article • Fuel, February 2016, Elsevier

    Professor Andrzej J. Nowak

  32. CFD-based shape optimisation of a CO 2 two-phase ejector mixing section

    Article • Applied Thermal Engineering, February 2016, Elsevier

    Professor Andrzej J. Nowak

  33. Numerical investigation of an R744 liquid ejector for supermarket refrigeration systems

    Article • Thermal Science, January 2016, National Library of Serbia

    Professor Andrzej J. Nowak

  34. Application range of the HEM approach for CO2 expansion inside two-phase ejectors for supermarket refrigeration systems

    Article • International Journal of Refrigeration, November 2015, Elsevier

    Professor Andrzej J. Nowak

  35. CFD model of the coal carbonization process

    Article • Fuel, June 2015, Elsevier

    Professor Andrzej J. Nowak

  36. Modelling and validation of transient heat transfer processes in human skin undergoing local cooling

    Article • PRZEGLĄD ELEKTROTECHNICZNY, May 2015, Wydawnictwo SIGMA-NOT, sp. z.o.o.

    Professor Andrzej J. Nowak

  37. Coupled numerical modelling of power loss generation in busbar system of low-voltage switchgear

    Article • International Journal of Thermal Sciences, August 2014, Elsevier

    Professor Andrzej J. Nowak

  38. Inverse thermal analysis of the neonatal brain cooling process

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, April 2014, Emerald

    Professor Andrzej J. Nowak

  39. 3-D periodic CFD model of the heating system in a coke oven battery

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, April 2014, Emerald

    Professor Andrzej J. Nowak

  40. Selected papers presented during the Numerical Heat Transfer 2012 International Conference (NHT2012) held on 4-6 September 2012 in Wroclaw, Poland

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, April 2014, Emerald

    Professor Andrzej J. Nowak

  41. A CFD-based investigation of the energy performance of two-phase R744 ejectors to recover the expansion work in refrigeration systems: An irreversibility analysis

    Article • International Journal of Refrigeration, April 2014, Elsevier

    Professor Andrzej J. Nowak

  42. Heat dissipation within electrical switchgear enclosure

    Article • January 2014, the Institution of Engineering and Technology (the IET)

    Professor Andrzej J. Nowak

  43. Modelling and optimisation of the operation of a radiant warmer

    Article • Medical Engineering & Physics, January 2014, Elsevier

    Professor Andrzej J. Nowak

  44. The experimental validation of a CFD model for a heating oven with natural air circulation

    Article • Applied Thermal Engineering, May 2013, Elsevier

    Professor Andrzej J. Nowak

  45. A computational model of a transcritical R744 ejector based on a homogeneous real fluid approach

    Article • Applied Mathematical Modelling, February 2013, Elsevier

    Professor Andrzej J. Nowak

  46. Retrieving of the initial moisture field in porous material based on temperature measurements during drying

    Article • Inverse Problems in Science and Engineering, July 2012, Taylor & Francis

    Professor Andrzej J. Nowak

  47. The Numerical Modelling of the Heat Transfer Processes within Neonate’s Body Based on the Simplified Geometric Model

    Article • January 2012, Springer Science + Business Media

    Professor Andrzej J. Nowak

  48. Shape Optimization of Coils and Cooling Ducts in Dry-Type Transformers Using Computational Fluid Dynamics and Genetic Algorithm

    Article • IEEE Transactions on Magnetics, June 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Andrzej J. Nowak

  49. Application of Bezier surfaces to the 3-D inverse geometry problem in continuous casting

    Article • Inverse Problems in Science and Engineering, January 2011, Taylor & Francis

    Professor Andrzej J. Nowak

  50. Inverse thermal problems in computational modelling of the paper vacuum drying process

    Article • Inverse Problems in Science and Engineering, January 2011, Taylor & Francis

    Professor Andrzej J. Nowak

  51. An effective 3-D inverse procedure to retrieve cooling conditions in an aluminium alloy continuous casting problem

    Article • Applied Thermal Engineering, July 2010, Elsevier

    Professor Andrzej J. Nowak

  52. A comparison of heterogenous and homogenous models of two-phase transonic compressible CO2flow through a heat pump ejector

    Article • IOP Conference Series Materials Science and Engineering, June 2010, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  53. Heat and mass transfer under an infant radiant warmer—development of a numerical model

    Article • Medical Engineering & Physics, June 2010, Elsevier

    Professor Andrzej J. Nowak

  54. An overview of recent applications of computational modelling in neonatology

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, May 2010, Royal Society Publishing

    Professor Andrzej J. Nowak

  55. Improved 3-D temperature uniformity in a laboratory drying oven based on experimentally validated CFD computations

    Article • Journal of Food Engineering, April 2010, Elsevier

    Professor Andrzej J. Nowak

  56. Numerical Simulation and Experimental Validation of Coupled Flow, Heat Transfer and Electromagnetic Problems in Electrical Transformers

    Article • Archives of Computational Methods in Engineering, May 2009, Springer Science + Business Media

    Professor Andrzej J. Nowak

  57. Mathematical Modelling of Two-Phase Transonic Compressible CO[sub 2] Flow Through Heat Pump Ejector

    Article • January 2009, American Institute of Physics

    Professor Andrzej J. Nowak

  58. Experimental validation of the coupled fluid flow, heat transfer and electromagnetic numerical model of the medium-power dry-type electrical transformer

    Article • International Journal of Thermal Sciences, October 2008, Elsevier

    Professor Andrzej J. Nowak

  59. Modelling of heat and mass transfer processes in neonatology

    Article • Biomedical Materials, August 2008, Institute of Physics Publishing

    Professor Andrzej J. Nowak

  60. Numerical analysis and experimental validation of the free surface flow and heat transfer in electrical transformers moulding processes

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, May 2008, Emerald

    Professor Andrzej J. Nowak

  61. Numerical Analysis of Heat Transfer Processes within Dry‐Type and Cast Resin Electrical Transformers Involving CFD, Electromagnetic and Mechanical Analyses

    Article • January 2008, American Institute of Physics

    Professor Andrzej J. Nowak

  62. A combined study of heat and mass transfer in an infant incubator with an overhead screen

    Article • Medical Engineering & Physics, June 2007, Elsevier

    Professor Andrzej J. Nowak

  63. Enhanced numerical model of performance of an encapsulated three-phase transformer in laboratory environment

    Article • Applied Thermal Engineering, January 2007, Elsevier

    Professor Andrzej J. Nowak

  64. Theoretical analysis of applying thermography and inverse solutions to determine thermal properties of cementitious materials

    Article • Inverse Problems in Science and Engineering, February 2005, Taylor & Francis

    Professor Andrzej J. Nowak

  65. Numerical modelling of thermal processes in an electrical transformer dipped into polymerised resin by using commercial CFD package fluent

    Article • Computers & Fluids, June 2004, Elsevier

    Professor Andrzej J. Nowak

  66. Application of BEM and sensitivity analysis to the solution of the governing diffusion–convection equation for a continuous casting process

    Article • Engineering Analysis with Boundary Elements, April 2004, Elsevier

    Professor Andrzej J. Nowak

  67. Inverse analysis of continuous casting processes

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, August 2003, Emerald

    Professor Andrzej J. Nowak

  68. Application of direct/inverse analysis to evaluate the structure integrity of concrete. Part I. Formulation for thermo-mechanical properties determination

    Article • NDT & E International, March 2003, Elsevier

    Professor Andrzej J. Nowak

  69. Analysis of fluid flow and energy transport in Czochralski's process

    Article • Computers & Fluids, January 2003, Elsevier

    Professor Andrzej J. Nowak

  70. Boundary and Geometry Inverse Thermal Problems in Continuous Casting

    Article • January 2003, Elsevier

    Professor Andrzej J. Nowak

  71. Coupling of conductive, convective and radiative heat transfer in Czochralski crystal growth process

    Article • Computational Materials Science, December 2002, Elsevier

    Professor Andrzej J. Nowak

  72. Identification of phase change fronts by Bezier splines and BEM

    Article • International Journal of Thermal Sciences, May 2002, Elsevier

    Professor Andrzej J. Nowak

  73. Cubic Bezier splines for BEM heat transfer analysis of the 2-D continuous casting problems

    Article • Computational Mechanics, April 2002, Springer Science + Business Media

    Professor Andrzej J. Nowak

  74. Solution of Inverse Geometry Problems Using Bezier Splines and Sensitivity Coefficients

    Article • January 2002, Elsevier

    Professor Andrzej J. Nowak

  75. Solving Inverse Boundary Problems in Continuous Casting Utilizing Sensitivity Coefficients and the Boundary Elements Method

    Article • January 2001, Springer Science + Business Media

    Professor Andrzej J. Nowak

  76. Heat transfer analysis of the continuous casting process by the front tracking BEM

    Article • Engineering Analysis with Boundary Elements, March 2000, Elsevier

    Professor Andrzej J. Nowak

  77. Application of the multiple reciprocity BEM to nonlinear potential problems

    Article • Engineering Analysis with Boundary Elements, December 1995, Elsevier

    Professor Andrzej J. Nowak

  78. STEADY‐STATE THERMOELASTICITY BY MULTIPLE RECIPROCITY METHOD

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, May 1992, Emerald

    Professor Andrzej J. Nowak

  79. Applying BEM to modelling of uptaking pollutants in clouds or fog drops

    Article • Advances in Engineering Software, January 1992, Elsevier

    Professor Andrzej J. Nowak

  80. BEM approach to inverse heat conduction problems

    Article • Engineering Analysis with Boundary Elements, January 1992, Elsevier

    Professor Andrzej J. Nowak

  81. Comparison of the dual reciprocity and the multiple reciprocity methods

    Article • Engineering Analysis with Boundary Elements, January 1992, Elsevier

    Professor Andrzej J. Nowak

  82. Identification of the boundary surfaces in 3D finite element codes

    Article • Advances in Engineering Software, January 1992, Elsevier

    Professor Andrzej J. Nowak

  83. Numerical verification of the multiple reciprocity method for linear potential problems with body forces

    Article • Engineering Analysis with Boundary Elements, January 1992, Elsevier

    Professor Andrzej J. Nowak

  84. Identification of the boundary curves in 2D finite elements codes

    Article • Advances in Engineering Software and Workstations, March 1991, Elsevier

    Professor Andrzej J. Nowak

  85. Some remarks on transformation techniques for transient nonlinear problems

    Article • Engineering Analysis with Boundary Elements, September 1990, Elsevier

    Professor Andrzej J. Nowak

  86. The multiple-reciprocity method. A new approach for transforming BEM domain integrals to the boundary

    Article • Engineering Analysis with Boundary Elements, September 1989, Elsevier

    Professor Andrzej J. Nowak

  87. Evaluating eigenvalues for boundary value problems of heat conduction in rectangular and cylindrical co-ordinate systems

    Article • International Journal for Numerical Methods in Engineering, February 1987, Wiley

    Professor Andrzej J. Nowak

  88. Boundary value problems in heat conduction with nonlinear material and nonlinear boundary conditions

    Article • Applied Mathematical Modelling, December 1981, Elsevier

    Professor Andrzej J. Nowak