All Stories

  1. A review of acoustic emission as a biotribological diagnostic tool

    Article • Tribology - Materials Surfaces & Interfaces, June 2019, Taylor & Francis

    DR Karl D Dearn

  2. Tribological performance of rice husk ceramic particles as a solid additive in liquid paraffin

    Article • Tribology International, November 2016, Elsevier

    DR Karl D Dearn

  3. Friction-Induced Transformation from Graphite Dispersed in Esterified Bio-Oil to Graphene

    Article • Tribology Letters, June 2016, Springer Science + Business Media

    DR Karl D Dearn

  4. The effect of synthetic polymer lubricants on the friction between common arthroplasty bearing biomaterials for encapsulated spinal implants

    Article • Tribology International, June 2016, Elsevier

    DR Karl D Dearn

  5. Investigation into the morphology, composition, structure and dry tribological behavior of rice husk ceramic particles

    Article • Applied Surface Science, March 2016, Elsevier

    DR Karl D Dearn

  6. The Tribology of Cleaning Processes

    Article • Tribology Online, January 2016, Japanese Society of Tribologists

    DR Karl D Dearn

  7. Synergistic lubricating behaviors of graphene and MoS2 dispersed in esterified bio-oil for steel/steel contact

    Article • Wear, November 2015, Elsevier

    DR Karl D Dearn

  8. Morphology, composition, and structure of carbon deposits from diesel and biomass oil/diesel blends on a pintle-type fuel injector nozzle

    Article • Tribology International, November 2015, Elsevier

    DR Karl D Dearn

  9. Synthesis and tribological studies of nanoparticle additives for pyrolysis bio-oil formulated as a diesel fuel

    Article • Proceedings of the Institution of Civil Engineers - Energy, April 2015, Elsevier

    DR Karl D Dearn

  10. The evolution of polymer wear debris from total disc arthroplasty

    Article • Biotribology, March 2015, Elsevier

    DR Karl D Dearn

  11. Improving the Tribological Performance of Poly-Ether-Ether-Ketone (PEEK) in Boundary/Mixed Lubrication Regimes by Laser Surface Texturing

    Article • January 2015, Research Publishing Services

    DR Karl D Dearn

  12. Improving Ethanol-Diesel Blend Through the Use of Hydroxylated Biodiesel

    Article • October 2014, SAE International

    DR Karl D Dearn

  13. An Investigation into the Characteristics of DISI Injector Deposits Using Advanced Analytical Methods

    Article • SAE International Journal of Fuels and Lubricants, October 2014, SAE International

    DR Karl D Dearn

  14. Role of TiF3 catalyst in the tribological properties of biofuel soot-contaminated liquid paraffin

    Article • Tribology International, September 2014, Elsevier

    DR Karl D Dearn

  15. Influence of Fuel Properties, Hydrogen, and Reformate Additions on Diesel-Biogas Dual-Fueled Engine

    Article • Journal of Energy Engineering, September 2014, American Society of Civil Engineers (ASCE)

    DR Karl D Dearn, Associate Professor Dr. Kampanart Theinnoi

  16. Effect of catalytic esterification on the friction and wear performance of bio-oil

    Article • Wear, March 2014, Elsevier

    DR Karl D Dearn

  17. Effect of Batch Initial Velocity on the Glass Furnace Efficiency

    Article • January 2014, Wiley

    DR Karl D Dearn

  18. The wear of PEEK in rolling–sliding contact – Simulation of polymer gear applications

    Article • Wear, January 2014, Elsevier

    DR Karl D Dearn

  19. Strength of poly-ether-ether-ketone: Effects of sterilisation and thermal ageing

    Article • Polymer Testing, September 2013, Elsevier

    DR Karl D Dearn

  20. Effect of TiF3 catalyst on the tribological properties of carbon black-contaminated engine oils

    Article • Wear, July 2013, Elsevier

    DR Karl D Dearn

  21. The role of soot particles in the tribological behavior of engine lubricating oils

    Article • Wear, July 2013, Elsevier

    DR Karl D Dearn

  22. A tribological assessment of a PEEK based self-mating total cervical disc replacement

    Article • Wear, June 2013, Elsevier

    DR Karl D Dearn

  23. Finding Synergies in Fuels Properties for the Design of Renewable Fuels – Hydroxylated Biodiesel Effects on Butanol-Diesel Blends

    Article • Environmental Science & Technology, March 2013, American Chemical Society (ACS)

    DR Karl D Dearn

  24. Applications of dry film lubricants for polymer gears

    Article • Wear, February 2013, Elsevier

    DR Karl D Dearn

  25. Effect of hydrogen on butanol–biodiesel blends in compression ignition engines

    Article • International Journal of Hydrogen Energy, February 2013, Elsevier

    DR Karl D Dearn, Associate Professor Dr. Kampanart Theinnoi

  26. Lubrication Regimes in High-Performance Polymer Spur Gears

    Article • Advances in Tribology, January 2013, Hindawi Publishing Corporation

    DR Karl D Dearn

  27. On the fundamental lubricity of 2,5-dimethylfuran as a synthetic engine fuel

    Article • Tribology International, November 2012, Elsevier

    DR Karl D Dearn

  28. The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol -diesel blends

    Article • Proceedings of the Institution of Civil Engineers - Energy, June 2012, Elsevier

    DR Karl D Dearn

  29. Wear processes in polymer implants

    Article • January 2012, Elsevier

    DR Karl D Dearn

  30. Interrogating the surface: the effect of blended diesel fuels on lubricity

    Article • SAE International Journal of Fuels and Lubricants, August 2011, SAE International

    DR Karl D Dearn

  31. Combustion characteristics and emissions of Fischer–Tropsch diesel fuels in IC engines

    Article • Progress in Energy and Combustion Science, August 2011, Elsevier

    DR Karl D Dearn

  32. Enhancing the lubricity of an environmentally friendly Swedish diesel fuel MK1

    Article • Wear, July 2011, Elsevier

    DR Karl D Dearn

  33. Acoustic noise from polymer gears – A tribological investigation

    Article • Materials & Design (1980-2015), June 2011, Elsevier

    DR Karl D Dearn

  34. A kinematic analysis of meshing polymer gear teeth

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, July 2010, SAGE Publications

    DR Karl D Dearn

  35. ENGINEERING POLYMERS AND COMPOSITES FOR MACHINE ELEMENTS

    Article • March 2009, World Scientific Pub Co Pte Lt

    DR Karl D Dearn

  36. Minimization of transmission errors in highly loaded plastic gear trains

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, September 2007, SAGE Publications

    DR Karl D Dearn