Contact

All Stories

  1. Performance analysis of protection devices in electrical power distribution system: Eko Electricity Distribution Company as a case study

    Article • International Journal of Advances in Applied Sciences, December 2023, Institute of Advanced Engineering and Science

    Prof. Olasunkanmi Salami Ismaila

  2. OBJECTIVE APPROACH IN INVESTIGATING IMPLICATION OF ROAD VEHICLE TYRE SAFETY KNOWLEDGE ON COMPLIANCE

    Article • Journal of Engineering Science, October 2022, Technical University of Moldova

    Prof. Olasunkanmi Salami Ismaila, Adinife Azodo

  3. Anthropometric Seat Design for Bus Drivers in Southwestern Nigeria

    Article • Mindanao Journal of Science and Technology, June 2022, University of Science and Technology of Southern Philippines

    Prof. Olasunkanmi Salami Ismaila

  4. FITNESS AND COMFORT ASSESSMENT OF FOOTWEAR: AN ANTHROPOMETRIC APPRAISAL

    Article • Journal of Engineering Science, September 2021, Technical University of Moldova

    Prof. Olasunkanmi Salami Ismaila, Adinife Azodo

  5. ERGO - EVALUATION OF URBAN BUS DRIVER’S WORKSTATIONS IN SOUTH WEST NIGERIA

    Article • Journal of Engineering Science, June 2021, Technical University of Moldova

    Prof. Olasunkanmi Salami Ismaila

  6. Physical and Combustion Indices of Thermally Treated Cornhusk and Sawdust Briquettes for Heating Applications in Nigeria

    Article • Journal of Natural Fibers, May 2020, Taylor & Francis

    Dr Opeyemi Akogun, Prof. Olasunkanmi Salami Ismaila

  7. Co-briquetting characteristics of cassava peel with sawdust at different torrefaction pretreatment conditions

    Article • Energy Sources Part A Recovery Utilization and Environmental Effects, April 2020, Taylor & Francis

    Prof. Olasunkanmi Salami Ismaila, Dr Opeyemi Akogun

  8. Ergonomic risk assessment of maintenance job in a gas power station

    Article • Sigurnost, April 2020, Zavod za Istrazivanje i Razvoj Sigurnosti

    Prof. Olasunkanmi Salami Ismaila

  9. ERGONOMIC EVALUATION OF PACKAGING WORKERS’ POSTURE IN A FOOD MANUFACTURING COMPANY

    Article • Journal of Engineering Studies and Research, February 2020, Vasile Alecsandri University of Bacau

    Prof. Olasunkanmi Salami Ismaila

  10. Electrochemical Inhibitory Effects of Non-edible Vegetable Oils on Low-Alloyed Low Carbon Steel in H2SO4

    Article • Journal of Failure Analysis and Prevention, January 2020, Springer Science + Business Media

    Prof. Olasunkanmi Salami Ismaila

  11. Effectiveness of industrial rubber as roller material for rice processing machine

    Article • Agriculture and Natural Resources, January 2020, Kasetsart University and Development Institute

    Prof. Olasunkanmi Salami Ismaila

  12. THE RELATIONSHIP BETWEEN THE ANTHROPOMETRIC MEASURES AND RESPIRATORY FUNCTIONS OF TOBACCO WORKERS

    Article • Journal of Engineering Studies and Research, December 2018, Vasile Alecsandri University of Bacau

    Prof. Olasunkanmi Salami Ismaila

  13. Analysis of Occupational Exposure Incident among Engineering Students During Industrial Training in Nigeria

    Article • September 2018, De Gruyter

    Adinife Azodo, Prof. Olasunkanmi Salami Ismaila

  14. DEVELOPMENT OF AN INDIGENOUS ENVIRONMENTAL FRIENDLY REFUSE PICKER

    Article • Journal of Natural Sciences Engineering and Technology, July 2018, Federal University of Agriculture, Abeokuta (FUNAAB)

    Prof. Olasunkanmi Salami Ismaila

  15. Performance Evaluation of a Developed Cashew Nut Shell Liquid Expeller

    Article • Agricultural Engineering, July 2018, De Gruyter

    Prof. Olasunkanmi Salami Ismaila

  16. DETERMINATION OF BACKPACK MASS LIMIT FOR STUDENTS IN A UNIVERSITY IN ABEOKUTA, SOUTHWESTERN NIGERIA

    Article • Journal of Engineering Studies and Research, February 2018, Vasile Alecsandri University of Bacau

    Prof. Olasunkanmi Salami Ismaila

  17. Effect of Respiratory Protection on Respiratory Flow Rates of Vehicle Spray Painters in Ibadan Metropolis, Oyo State, Nigeria

    Article • Ergonomics International Journal, January 2018, Medwin Publishers

    Prof. Olasunkanmi Salami Ismaila

  18. Safe backpack weight limit for secondary school students in Ibadan, Southwestern Nigeria

    Article • Alexandria Engineering Journal, February 2017, Elsevier

    Prof. Olasunkanmi Salami Ismaila

  19. Ergonomic Risk Assessment of Sea Fishermen Part II: Upper Limb Repetitive Movements

    Article • July 2016, Springer Science + Business Media

    Prof. Olasunkanmi Salami Ismaila

  20. Models to estimate the palm surface area of students in a tertiary institution in Abeokuta, Nigeria

    Article • Cogent Engineering, April 2016, Taylor & Francis

    Prof. Olasunkanmi Salami Ismaila

  21. Model for predicting peak expiratory flow rate of Nigerian workers in a cement factory in Itori, Ogun State, Nigeria

    Article • International Journal of Occupational Safety and Ergonomics, October 2015, Taylor & Francis

    Prof. Olasunkanmi Salami Ismaila

  22. Low back pain assessment application for construction workers

    Article • Journal of Engineering Design and Technology, July 2015, Emerald

    Prof. Olasunkanmi Salami Ismaila, Dr Adeyemi Hezekiah Oluwole, Professor Adebayo Felix Adekoya

  23. Modelling and Simulation of Coking in the Riser of an Industrial Fluid Catalytic Cracking (FCC) Unit

    Article • Nigerian Journal of Technology, March 2015, African Journals Online (AJOL)

    Prof. Olasunkanmi Salami Ismaila

  24. Determination of safe weight limit of sandcrete block for block moulders

    Article • March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Olasunkanmi Salami Ismaila

  25. An Approach of Exergy Analysis of Human Physiological Response in the Outdoor Conditions during Blocklaying in Ogun State, Nigeria

    Article • British Journal of Applied Science & Technology, January 2015, Sciencedomain International

    Prof. Olasunkanmi Salami Ismaila, Dr Adekunle Ibrahim Musa

  26. Models for estimating the anthropometric dimensions using standing height for furniture design

    Article • Journal of Engineering Design and Technology, July 2014, Emerald

    Prof. Olasunkanmi Salami Ismaila

  27. Noise exposure as a factor in the increase of blood pressure of workers in a sack manufacturing industry

    Article • Beni-Suef University Journal of Basic and Applied Sciences, June 2014, Springer Science + Business Media

    Prof. Olasunkanmi Salami Ismaila

  28. Human-centered engineering: the challenges of Nigerian engineer

    Article • Journal of Engineering Design and Technology, April 2014, Emerald

    Prof. Olasunkanmi Salami Ismaila

  29. Predicting relative and working heart rates of bricklaying jobs using neural network

    Article • Occupational Ergonomics, July 2013, IOS Press

    Prof. Olasunkanmi Salami Ismaila

  30. Modeling manual material lifting risk evaluation: A fuzzy logic approach

    Article • International Journal of Applied Science and Engineering Research, February 2013, Integrated Publishing Association

    Prof. Olasunkanmi Salami Ismaila, Dr Adeyemi Hezekiah Oluwole

  31. Cardiovascular Strain of Sawmill Workers in South-Western Nigeria

    Article • International Journal of Occupational Safety and Ergonomics, January 2013, Taylor & Francis

    Prof. Olasunkanmi Salami Ismaila

  32. Work capacity assessment of Nigerian bricklayers

    Article • Management Science Letters, January 2012, Growing Science

    Prof. Olasunkanmi Salami Ismaila

  33. Effect of Normalizing and Hardening on Mechanical Properties of Spring

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2012, Scientific Research Publishing, Inc,

    Prof. Olasunkanmi Salami Ismaila

  34. Student anthropometric data and furniture mismatches in selected institutions in Abeokuta, Ogun State, Nigeria

    Article • Theoretical Issues in Ergonomics Science, September 2011, Taylor & Francis

    Prof. Olasunkanmi Salami Ismaila, Dr Adekunle Ibrahim Musa, Dr Adekunle Ibrahim Musa

  35. Ergo-effects of designed school furniture and sitting positions on students behaviour and Musculo-Skeletal Disorder in Nigerian tertiary institutions

    Article • Management Science Letters, July 2011, Growing Science

    Prof. Olasunkanmi Salami Ismaila, Dr Adekunle Ibrahim Musa

  36. Performance evaluation of a locally developed domestic drinking water filter

    Article • International Journal of Environmental Studies, October 2010, Taylor & Francis

    Prof. Olasunkanmi Salami Ismaila

  37. Effects of Type of Work and Age on Spinal Shrinkage

    Article • Journal of Applied Science Engineering and Technology, May 2008, African Journals Online (AJOL)

    Prof. Olasunkanmi Salami Ismaila