All Stories

  1. Simulation of Rotor-Rotor Interaction and Noise of an Axial Counter-Rotating Fan
  2. A Comparative Study between Two Different Techniques of Solar Integrated Systems
  3. Optimum Operating Parameters and Blade Setting of a High-Speed Propeller
  4. Computation of erosion in a hydro turbine
  5. Investigation of steady and unsteady cavitating flows through a small Francis turbine
  6. Energy, exergy, and economic analysis of an integrated solar combined cycle power plant
  7. Flow unsteadiness and rotor-stator interaction in a two-stage axial turbine
  8. Hydrodynamic Characterization of Small-Size Kaplan Turbine
  9. Study of particle dynamics and erosion in a centrifugal fan
  10. Characterization of flow interactions in an axial fan stage
  11. Thermo-economic Assessment of the first Integrated Solar Combined Cycle System of Hassi R’mel
  12. Novel hybridization of solar central receiver system with combined cycle power plant
  13. This article investigates the steady and unsteady flows in a complete small Kaplan turbine
  14. Influence of Staggering and Interdistance on Performance of a Low-Speed Counterrotating Axial Fan
  15. Corrigendum to “Characterization of Flow Interactions in a One-Stage Shrouded Axial Turbine”
  16. Blade stacking and clocking effects in two-stage high-pressure axial turbine
  17. Assessment of some stall-onset criteria for centrifugal compressors
  18. Predicting unsteady behavior of a small francis turbine at several operating points
  19. Simulation and analysis of vane-blade interaction in a two-stage high-pressure axial turbine
  20. Improvement of the performance of an axial fan with counter-rotation
  21. Prediction of erosion in an axial turbine with initial position of blade
  22. Determination of the Performance of a Solar Tower Integrated with a Combined Cycle
  23. Characterization of Flow Interactions in a One-Stage Shrouded Axial Turbine
  24. Multi-Objective Optimization of Two-Stage Centrifugal Pump using NSGA-II Algorithm
  25. Unsteady behaviour of a twin entry radial turbine under engine like inlet flow conditions
  26. Unsteady heat transfer of exhaust valves
  27. Steam turbine injection generator performance estimation considering turbine blade cooling
  28. Characterization of component interactions in two-stage axial turbine
  29. Thermo-economic optimization of heat recovery steam generator for a range of gas turbine exhaust temperatures
  30. An approach for the thermal analysis of internal combustion engines’ exhaust valves
  31. Experimental and numerical investigations of internal heat transfer in an innovative trailing edge blade cooling system: stationary and rotation effects, part 2: numerical results
  32. Experimental and numerical investigations of internal heat transfer in an innovative trailing edge blade cooling system: stationary and rotation effects, part 1—experimental results
  33. Characterization of a Twin-Entry Radial Turbine under Pulsatile Flow Condition
  34. Modeling of Particle Trajectory and Erosion of Large Rotor Blades
  35. Simulations of Steady Cavitating Flow in a Small Francis Turbine
  36. Surrogate-Based Shape Optimization of Stall Margin and Efficiency of a Centrifugal Compressor
  37. Simulation of erosion by a particulate airflow through a ventilator
  38. Heat transfer investigation in new cooling schemes of a stationary blade trailing edge
  39. Experimental study of a cooling scheme for a turbine blade trailing edge
  40. Thermodynamic optimization of several (heat recovery steam generator) HRSG configurations for a range of exhaust gas temperatures
  41. Analyses of steady and unsteady flows in a turbocharger’s radial turbine
  42. Aerodynamic Characterization of a High Speed Propeller
  43. Cycle Optimization of Mixed High Bypass Turbofan
  44. Simulations of Steady and Unsteady Flows Through a Twin-Entry Radial Turbine
  45. Study of Particle Ingestion Through Two-Stage Gas Turbine
  46. Radial basis function-based shape optimization of centrifugal impeller using sequential sampling
  47. Nusselt Correlations in a Trailing Edge Cooling System with Long Pedestals and Ribs
  48. CFD analyses of the pulsatile flows in a twin-entry radial turbine
  49. A numerical optimization chain combining computational fluid dynamics and surrogate analysis for the aerodynamic design of airfoils
  50. Shape optimization of a centrifugal compressor impeller
  51. CFD analyses of a radial inflow turbine
  52. Analyses of radial compressor stability improvement by casing treatment
  53. Effects of Solid Particle Ingestion Through an HP Turbine
  54. Simulation of Particle Trajectories and Erosion in a Centrifugal Compressor
  55. Study of Sand Particle Trajectories and Erosion Into the First Compression Stage of a Turbofan
  56. Turboprop Cycle Optimization Using Particle Swarm Algorithm
  57. Analyses of impeller—vaneless-diffuser—scroll interactions in a radial compressor
  58. Optimizations of turboprop engines using the non-dominated sorting genetic algorithm
  59. Prediction of Erosion in Radial Turbine Components
  60. Optimization of Turbofan Propulsion Cycle Using a Genetic Algorithm
  61. Erosive Effects in Axial Turbomachinery
  62. Simulation of Particle Trajectories and Erosion Through a Centrifugal Compressor
  63. Study of Sand Particle Trajectories and Erosion Into the First Fan Stage of a Turbofan
  64. Minimum power requirement for a propeller-driven aircraft and optimum cycle parameters of turboprop engines
  65. Optimum Design of Turboprop Engines
  66. Analyses and Optimization of a Propulsion Cycle for Unmixed High Bypass Turbofan
  67. Computation of the Flow Field of Transonic Axial Compressor by Steady Arbitrary Lagrangian Eulerian Formulation
  68. Effects of Sand Ingestion Through an Axial Fan With Blade Staggering
  69. minimum thrust requirement for a given aircraft configuration.
  70. Prediction of an axial turbomachine performance degradation due to sand ingestion
  71. Experimental investigation of axial fan erosion and performance degradation
  72. Numerical Study of an Inlet Particle Separator
  73. Study of Erosion Effects on an Axial Fan Global Range of Operation
  74. Numerical Simulation of the Axial Fan Performance Degradation Due to Sand Ingestion
  75. Particles Trajectories Through an Axial Fan and Performance Degradation due to Sand Ingestion
  76. An Approximate Method for Jet Engines Flight Performances Prediction