All Stories

  1. A two-stage approach of manufacturing FeAl40 iron aluminides by self-propagating synthesis and pressureless sintering

    Article • Powder Metallurgy, June 2018, Taylor & Francis

    Professor Andreas Chrysanthou

  2. Crack closure, Compliance curve, Plastic deformation

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    Professor Andreas Chrysanthou, Mr Ma Mohin, Dr Yigeng Xu

  3. Novel Glass-Ceramic Composition as Sealant for SOFCs

    Article • Journal of the American Ceramic Society, September 2014, Wiley

    Professor Andreas Chrysanthou

  4. Correlation of Dent Depth to Maximum Contact Force and Damage of Composite Laminates

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Professor Andreas Chrysanthou

  5. Effect of pulsed magnetic field pre-treatment of AISI 52100 steel on the coefficient of sliding friction and wear in pin-on-disk tests

    Article • Friction, July 2014, Tsinghua University Press

    Professor Andreas Chrysanthou

  6. The Effect of Setting Velocity on the Static and Fatigue Strengths of Self-Piercing Riveted Joints for Automotive Applications

    Article • January 2014, Wiley

    Professor Andreas Chrysanthou

  7. Introduction

    Article • January 2014, Elsevier

    Professor Andreas Chrysanthou

  8. Fatigue behaviour of self-piercing riveted joints

    Article • January 2014, Elsevier

    Professor Andreas Chrysanthou

  9. Corrosion behaviour of self-piercing riveted joints

    Article • January 2014, Elsevier

    Professor Andreas Chrysanthou

  10. Contributor contact details

    Article • January 2014, Elsevier

    Professor Andreas Chrysanthou

  11. Contact Behaviour of Composite Laminate under Quasi-Static Indentation Load

    Article • Key Engineering Materials, September 2013, Trans Tech Publications

    Professor Andreas Chrysanthou

  12. Martensitic–Austenitic phase transformation of Ni–Ti SMAs: Thermal properties

    Article • Intermetallics, May 2012, Elsevier

    Professor Andreas Chrysanthou

  13. Effect of Pulsed Electric Current Treatment on the Corrosion and Strength of Reinforcing Steel

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Professor Andreas Chrysanthou

  14. Self-Propagating High-Temperature Synthesis of Iron- and Copper-Matrix Cermets

    Article • Advances in Science and Technology, October 2010, Trans Tech Publications

    Professor Andreas Chrysanthou

  15. ChemInform Abstract: Simultaneous Carburization and Oxidation of Niobium in the Presence of Carbon Monoxide

    Article • ChemInform, August 2010, Wiley

    Professor Andreas Chrysanthou

  16. Process Feasibility Analysis of Self-Pierce Riveting High Strength Low Alloy Steel

    Article • January 2010, ASME International

    Professor Andreas Chrysanthou

  17. Comparison between the thermal properties of fully dense and porous NiTi SMAs

    Article • Intermetallics, January 2010, Elsevier

    Professor Andreas Chrysanthou

  18. Thermal diffusivity of Ni–Ti SMAs

    Article • Journal of Alloys and Compounds, April 2009, Elsevier

    Professor Andreas Chrysanthou

  19. Formation and microstructure of (Ti, V)C-reinforced iron-matrix composites using self-propagating high-temperature synthesis

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), March 2008, Carl Hanser Verlag

    Professor Andreas Chrysanthou

  20. Evaluation of quality and behaviour of self-piercing riveted aluminium to high strength low alloy sheets with different surface coatings

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    Professor Andreas Chrysanthou

  21. TiC–TiB2 composites: A review of phase relationships, processing and properties

    Article • Journal of the European Ceramic Society, January 2008, Elsevier

    Professor Andreas Chrysanthou

  22. Fatigue Behaviour of Friction Stir Joined Aluminium Alloy NG5754 and AA6111 Sheets

    Article • April 2007, SAE International

    Professor Andreas Chrysanthou

  23. An Evaluation of NDT for Self-pierce Riveting

    Article • April 2007, SAE International

    Professor Andreas Chrysanthou

  24. Nanostructured TiC1-X - TiB2 Composites Obtained by Metastability Processing

    Article • Advanced Materials Research, January 2007, Trans Tech Publications

    Professor Andreas Chrysanthou

  25. The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor Andreas Chrysanthou

  26. Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor Andreas Chrysanthou

  27. The Effect of Breakthrough on the Mechanical Behavior of Self-Piercing Riveted Aluminum 5754-HSLA Joints

    Article • May 2005, CrossRef Test Account

    Professor Andreas Chrysanthou

  28. An investigation of the self-propagating high-temperature synthesis of Ti(Si,Al)2

    Article • Journal of Materials Science, May 2005, Springer Science + Business Media

    Professor Andreas Chrysanthou

  29. The Effect of Pre-Straining on the Mechanical Behaviour of Self-Piercing Riveted Aluminium Alloy Sheets

    Article • Advanced Materials Research, January 2005, Trans Tech Publications

    Professor Andreas Chrysanthou

  30. Fatigue Failure Modes in Self-Piercing Riveted Aluminium Alloy Joints

    Article • January 2004, ASME International

    Professor Andreas Chrysanthou

  31. Fretting wear in self-piercing riveted aluminium alloy sheet

    Article • Wear, August 2003, Elsevier

    Professor Andreas Chrysanthou

  32. Preparation of FeTiC composites by the thermal-explosion mode of combustion synthesis

    Article • Ceramics International, January 1997, Elsevier

    Professor Andreas Chrysanthou

  33. Phase equilibria in the metal-sulfur-oxygen system and selective reduction of metal oxides and sulfides: Part I. The carbothermic reduction and calcination of complex mineral sulfides

    Article • Metallurgical and Materials Transactions B, October 1996, Springer Science + Business Media

    Professor Andreas Chrysanthou

  34. Enhancing the dispersion of TiC in copper

    Article • Journal of Materials Science Letters, January 1996, Springer Science + Business Media

    Professor Andreas Chrysanthou

  35. Observation of intermetallic Ni3Ti whiskers during combustion synthesis reactions in the Ni-Ti-C system

    Article • Scripta Metallurgica et Materialia, October 1995, Elsevier

    Professor Andreas Chrysanthou

  36. The behaviour of tantalum in the presence of CO and CO/CO2 mixtures at elevated temperatures

    Article • Materials Science and Engineering A, April 1995, Elsevier

    Professor Andreas Chrysanthou

  37. New Technologies for the Reactive Processing of Metal-Matrix Composites

    Article • Key Engineering Materials, January 1995, Trans Tech Publications

    Professor Andreas Chrysanthou

  38. Production of copper-matrix composites by in situ processing

    Article • Journal of Materials Science, January 1995, Springer Science + Business Media

    Professor Andreas Chrysanthou

  39. Characteristics of the combustion synthesis of TiC and Fe-TiC composites

    Article • Journal of Materials Science, October 1994, Springer Science + Business Media

    Professor Andreas Chrysanthou

  40. The observation and crystal structure of titanium oxycarbonitride

    Article • Powder Diffraction, September 1994, Cambridge University Press

    Professor Andreas Chrysanthou

  41. Carbothermic reduction of a columbite concentrate to produce cemented carbides and metal-matrix composites

    Article • Journal of Alloys and Compounds, April 1994, Elsevier

    Professor Andreas Chrysanthou

  42. Preparation of ceramic composite powders from waste colliery minestones

    Article • Journal of Materials Science, January 1994, Springer Science + Business Media

    Professor Andreas Chrysanthou

  43. Preparation and microstructure of Al2O3TiC composites by self-propagated high temperature synthesis

    Article • Journal of Alloys and Compounds, January 1994, Elsevier

    Professor Andreas Chrysanthou

  44. Simultaneous carburisation and oxidation of niobium in the presence of carbon monoxide

    Article • Journal of Alloys and Compounds, January 1993, Elsevier

    Professor Andreas Chrysanthou

  45. A Crystallographic Re-Examination of the (Fe,W)6C Phase Field in the Fe-W-C System

    Article • Powder Diffraction, September 1992, Cambridge University Press

    Professor Andreas Chrysanthou

  46. The observation of metastable molybdenum carbides

    Article • Journal of Materials Science Letters, February 1991, Springer Science + Business Media

    Professor Andreas Chrysanthou

  47. Formation of silicon carbide whiskers and their microstructure

    Article • Journal of Materials Science, January 1991, Springer Science + Business Media

    Professor Andreas Chrysanthou

  48. The behaviour of aluminium-chromium ferritic steels in simulated coal gasification atmospheres at 723 K

    Article • Materials Science and Engineering A, December 1989, Elsevier

    Professor Andreas Chrysanthou