All Stories

  1. Influence of contouring the lithium metal/solid electrolyte interface on the critical current for dendrites
  2. Piecewise damage model for SiC/SiC composites with multilevel experimental validation
  3. Fracture toughness evaluation of a nuclear graphite with non-linear elastic properties by 3D imaging and inverse finite element analysis
  4. In situ observation of crystal reorientation in polygranular graphite by synchrotron X-ray diffraction and neutron imaging
  5. HR-EBSD analysis of in situ stable crack growth at the micron scale
  6. In situ observation of compressive deformation of an interconnected network of zinc oxide tetrapods
  7. Hoop Strain Measurement During a SiC/SiC Ceramic Composite Tube Burst Test by Digital Volume Correlation of X-Ray Computed Tomographs
  8. Effect of irradiation swelling on the mechanical properties of unidirectional SiC/SiC composites: A numerical investigation at microstructural level
  9. In situ characterisation of the strain fields of intragranular slip bands in ferrite by high-resolution electron backscatter diffraction
  10. High temperature spherical nano-indentation of graphite crystals
  11. Combined evaluation of Young modulus and fracture toughness in small specimens of fine grained nuclear graphite using 3D image analysis
  12. Ex-situ micro X-ray computed tomography tests and image-based simulation of UHPFRC beams under bending
  13. J-Integral Analysis of the Elastic Strain Fields of Ferrite Deformation Twins using Electron Backscatter Diffraction
  14. In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading
  15. FFT phase-field model combined with cohesive composite voxels for fracture of composite materials with interfaces
  16. A NEA review on innovative structural materials solutions, including advanced manufacturing processes for nuclear applications based on technology readiness assessment
  17. In situ X-ray tomography characterisation of 3D deformation of C/C-SiC composites loaded under tension
  18. Special Issue on Advances in understanding and modelling the micromechanisms of fracture and fatigue
  19. Temperature Dependence of Lithium Anode Voiding in Argyrodite Solid-State Batteries
  20. The infiltration behavior and chemical compatibility of molten lead-bismuth eutectic in nuclear graphite at elevated temperature
  21. Imaging Sodium Dendrite Growth in All‐Solid‐State Sodium Batteries Using 23 Na T 2 ‐Weighted Magnetic Resonance Imaging
  22. Imaging Sodium Dendrite Growth in All‐Solid‐State Sodium Batteries Using 23 Na T 2 ‐Weighted Magnetic Resonance Imaging
  23. In-situ X-ray tomography of wear – A feasibility study
  24. Measuring the brittle-to-ductile transition temperature of tungsten–tantalum alloy using chevron-notched micro-cantilevers
  25. Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes
  26. Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic α-uranium
  27. A 3D full‐field study of cracks in a nuclear graphite under mode I and mode II cyclic dwell loading conditions
  28. Sodium/Na β″ Alumina Interface: Effect of Pressure on Voids
  29. Structure and flexural properties of 3D needled carbon fiber reinforced carbon and silicon carbide (C/C-SiC) composites fabricated by gaseous and liquid silicon infiltration
  30. Validating 3D two-parameter fracture mechanics models for structural integrity assessments
  31. Fatigue crack closure: A myth or a misconception?
  32. Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells
  33. Evaluation of Fracture Toughness Measurements Using Chevron-Notched Silicon and Tungsten Microcantilevers
  34. Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures
  35. Computed tomography porosity and spherical indentation for determining cortical bone millimetre-scale mechanical properties
  36. Application of Neutron Imaging to Detect and Quantify Fatigue Cracking
  37. Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation
  38. Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography
  39. In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite
  40. Lattice strain and texture development in coarse-grained uranium – a neutron diffraction study
  41. In situ mapping of normal strains in the field of a growing fatigue crack in a steel weld using digital image correlation and energy dispersive synchrotron X-ray diffraction
  42. Data related to the mesoscopic structure of iso-graphite for nuclear applications
  43. In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite
  44. Mesoscopic structure features in synthetic graphite
  45. Validating 3D two-parameter fracture mechanics for structural integrity assessments
  46. 3D Cellular Automata fracture model for porous graphite microstructures
  47. Observation of crack growth in a polycrystalline ferroelectric by synchrotron X-ray diffraction
  48. Synchrotron X-ray characterization of crack strain fields in polygranular graphite
  49. An autonomous surface discontinuity detection and quantification method by digital image correlation and phase congruency
  50. A multi-scale three-dimensional Cellular Automata fracture model of radiolytically oxidised nuclear graphite
  51. J-Integral Calculation by Finite Element Processing of Measured Full-Field Surface Displacements
  52. In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete
  53. In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite
  54. Three-dimensional measurement and cohesive element modelling of deformation and damage in a 2.5-dimensional woven ceramic matrix composite
  55. Quantifying yield behaviour in metals by X-ray nanotomography
  56. Multifractal-based assessment of Gilsocarbon graphite microstructures
  57. Computer modelling of damage in ceramic composites
  58. Effect of surface machining on intergranular stress corrosion cracking (IGSCC) in sensitised type 304 austenitic stainless steel
  59. Multi-scale modelling of nuclear graphite tensile strength using the site-bond lattice model
  60. Three-dimensional displacement mapping of diffused Pt thermal barrier coatings via synchrotron X-ray computed tomography and digital volume correlation
  61. Porosity characterization of fiber-reinforced ceramic matrix composite using synchrotron X-ray computed tomography
  62. Observation and simulation of indentation damage in a SiC–SiCfibre ceramic matrix composite
  63. Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy
  64. In situ measurement of the strains within a mechanically loaded polygranular graphite
  65. Obtaining the J-integral by diffraction-based crack-field strain mapping
  66. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution
  67. Method for the explicit insertion of microstructure in Cellular Automata Finite Element (CAFE) models based on an irregular tetrahedral Finite Element mesh: Application in a multi-scale Finite Element Microstructure MEshfree framework (FEMME)
  68. FEMME: A multi-scale Finite Element Microstructure MEshfree fracture model for quasi-brittle materials with complex microstructures
  69. Multi-scale modeling of damage development in a thermal barrier coating
  70. Time-resolved synchrotron tomographic quantification of deformation-induced flow in a semi-solid equiaxed dendritic Al–Cu alloy
  71. Synchrotron X-ray Tomographic Quantification of Deformation Induced Strain Localisation in Semi-solid Al- 15wt.%Cu
  72. Influence of milling on the development of stress corrosion cracks in austenitic stainless steel
  73. Advanced 2D and 3D Digital Image Correlation of the Full-Field Displacements of Cracks and Defects
  74. Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation
  75. A high-energy neutron source for fusion applications
  76. In situ quantitative three-dimensional characterisation of sub-indentation cracking in polycrystalline alumina
  77. In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy
  78. A quantitative three-dimensional in situ study of a short fatigue crack in a magnesium alloy
  79. Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, observed in situ
  80. RICH TOMOGRAPHY TECHNIQUES FOR THE ANALYSIS OF MICROSTRUCTURE AND DEFORMATION
  81. Reducing risk and accelerating delivery of a neutron source for fusion materials research
  82. Studying SiC/SiC Composites by X-Ray Tomography
  83. 3D Cellular Automata Finite Element Method with Explicit Microstructure: Modeling Quasi-brittle Fracture using Meshfree Damage Propagation
  84. 3D Studies of Damage by Combined X-ray Tomography and Digital Volume Correlation
  85. Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina
  86. 3D Studies of Indentation by Combined X-Ray Tomography and Digital Volume Correlation
  87. Fracture Characterisation of Reactor Core Graphite under Biaxial Loading
  88. Three-dimensional crack observation, quantification and simulation in a quasi-brittle material
  89. Observation and quantification of three-dimensional crack propagation in poly-granular graphite
  90. Editorial
  91. Flexural strength and defect behaviour of polygranular graphite under different states of stress
  92. Application of accelerator based neutron sources in fusion materials research
  93. In situ observation of short fatigue crack propagation in oxygenated water at elevated temperature and pressure
  94. Annealing of ion irradiation damage in nuclear graphite
  95. Fracture behaviour of an anisotropic polygranular graphite (PGA)
  96. Intergranular crack nuclei in polycrystalline alumina
  97. Application of an independent parallel reactions model on the annealing kinetics of BEPO irradiated graphite
  98. An approach to calculate theJ-integral by digital image correlation displacement field measurement
  99. Quantitative in situ study of short crack propagation in polygranular graphite by digital image correlation
  100. A new approach for DL-EPR testing of thermo-mechanically processed austenitic stainless steel
  101. Three-dimensional in situ observations of short fatigue crack growth in magnesium
  102. Effects of orientation, stress and exposure time on short intergranular stress corrosion crack behaviour in sensitised type 304 austenitic stainless steel
  103. Detection and characterisation of intergranular stress-corrosion cracking on austenitic stainless steel
  104. Damage, crack growth and fracture characteristics of nuclear grade graphite using the Double Torsion technique
  105. A method for the 3-D quantification of bridging ligaments during crack propagation
  106. In situ observation of crack nuclei in poly-granular graphite under ring-on-ring equi-biaxial and flexural loading
  107. An Evaluation of the Double Torsion Technique
  108. Influence of Twins on Short Fatigue Cracks in Type 316L Stainless Steel
  109. In-Situ Observation and Modelling of Intergranular Cracking in Polycrystalline Alumina
  110. Diffraction contrast tomography for the study of polycrystalline stainless steel microstructures and stress corrosion cracking
  111. 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography
  112. Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques
  113. Nanotomography for understanding materials degradation
  114. Fracture behaviour of radiolytically oxidised reactor core graphites: a view
  115. 3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm
  116. A Consideration of the Effect of Radiolytic Oxidation on Fracture Behaviour of Reactor Core Graphites
  117. The Location of Radioisotopes in British Experimental Pile Grade Zero Graphite Waste
  118. Characterisation of grain boundary cluster compactness in austenitic stainless steel
  119. Correlations of electrochemical noise, acoustic emission and complementary monitoring techniques during intergranular stress-corrosion cracking of austenitic stainless steel
  120. Grain Tracking at the High Energy Materials Science Beamline of the Petra III Synchrotron Radiation Source
  121. Non-destructive analysis of micro texture and grain boundary character from X-ray diffraction contrast tomography
  122. Towards Understanding the Development of Grain Boundary Clusters in Austenitic Stainless Steel
  123. Preliminary Evaluation of Digital Image Correlation for In-situ Observation of Low Temperature Atmospheric-Induced Chloride Stress Corrosion Cracking in Austenitic Stainless Steels
  124. Mechanical Properties and Fracture of Materials
  125. New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging
  126. Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis
  127. In situobservation of intergranular crack nucleation in a grain boundary controlled austenitic stainless steel
  128. Five-parameter grain boundary analysis of a grain boundary-engineered austenitic stainless steel
  129. Towards Modelling Intergranular Stress-Corrosion Cracks Using Experimentally Obtained Grain Topologies
  130. Microstructural scale strain localisation in nuclear graphite
  131. Microstructural modelling of nuclear graphite using multi-phase models
  132. Microstructural characterisation of nuclear grade graphite
  133. Microcracks in nuclear graphite and highly oriented pyrolytic graphite (HOPG)
  134. Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling
  135. Characterization of heterogeneity and nonlinearity in material properties of nuclear graphite using an inverse method
  136. Application of an independent parallel reactions model on the annealing kinetics to irradiated graphite waste
  137. Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite
  138. Effect of thermomechanical process history on grain boundary control in an austenitic stainless steel
  139. Observation of microstructure deformation and damage in nuclear graphite
  140. Nanostructures of carbon in nuclear graphite
  141. Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal
  142. Preparation of fatigue specimens with controlled surface characteristics
  143. Modelling the effects of surface finish on fatigue limit in austenitic stainless steels
  144. The influence of low-strain thermo-mechanical processing on grain boundary network characteristics in type 304 austenitic stainless steel
  145. X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
  146. Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens
  147. The microstructure of nuclear graphite binders
  148. Mesoscale Mechanical Model for Intergranular Stress Corrosion Cracking and Implications for Microstructure Engineering
  149. In-Situ Observations of Intergranular Stress Corrosion Cracking
  150. In-Situ Observation of Crack Nucleation in Nuclear Graphite by Digital Image Correlation
  151. High-resolution, in-situ, tomographic observations of stress corrosion cracking
  152. Grain boundary engineering for crack bridging
  153. Surface grain boundary engineering of shot-peened type 304 stainless steel
  154. Rates of intergranular environment assisted cracking in three-dimensional model microstructures
  155. Modelling Intergranular Stress Corrosion Cracking in Simulated Three-Dimensional Microstructures
  156. A three-dimensional computational model for intergranular cracking
  157. Characterization of Material Properties Using an Inverse Method
  158. X-ray tomography observation of crack propagation in nuclear graphite
  159. X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking
  160. X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel
  161. A two-dimensional mesoscale model for intergranular stress corrosion crack propagation☆
  162. Three dimensional observations and modelling of intergranular stress corrosion cracking in austenitic stainless steel
  163. Numerical modelling of the effects of porosity changes on the mechanical properties of nuclear graphite
  164. Measurement of crack bridging stresses in environment-assisted cracking of duplex stainless by synchrotron diffraction
  165. In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction
  166. Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications
  167. Meso-Scale Mechanical Model for Intergranular Stress Corrosion Cracking and Implications for Microstructure Engineering
  168. Controlled Initiation of Short Fatigue Cracks in 316L Steel
  169. The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography
  170. Environment-assisted cracking of cast WE43-T6 magnesium
  171. Prediction of Aqueous Solubility Based on Large Datasets Using Several QSPR Models Utilizing Topological Structure Representation
  172. High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron
  173. Fatigue crack nuclei in austempered ductile cast iron
  174. Short fatigue cracks in austempered ductile cast iron (ADI)
  175. Application of electron backscattered diffraction to cleavage fracture in duplex stainless steel
  176. THE CRACK INITIATION TOUGHNESS FOR BRITTLE FRACTURE OF SUPER DUPLEX STAINLESS STEEL
  177. THE BRITTLE FRACTURE OF 475°C EMBRITTLED CAST DUPLEX STAINLESS STEEL
  178. Hydrogen-assisted stable crack growth in iron-3 wt% silicon steel
  179. THE FRACTURE MECHANISM IN 475°C EMBRITTLED FERRITIC STAINLESS STEELS
  180. THE FRACTURE MECHANISM OF 475°C EMBRITTLEMENT IN A DUPLEX STAINLESS STEEL
  181. MICROSTRUCTURAL AND ENVIRONMENTAL EFFECTS ON FATIGUE CRACK PROPAGATION IN DUPLEX STAINLESS STEELS
  182. Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel
  183. Toughening mechanisms in the high temperature fracture of high purity alumina
  184. The brittle/ductile transition in cubic stabilised zirconia
  185. In-situ scanning acoustic microscopy of crack bridging in alumina
  186. Scanning Acoustic Microscopy Observations of High-Temperature Crack-Bridging Mechanisms in Alumina
  187. Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels
  188. Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel
  189. Crack Propagation Resistance and Damage Mechanisms in Nuclear Graphite
  190. Effects of Surface Finish on the Fatigue Limit in Austenitic Stainless Steels (Modelling and Experimental Observations)
  191. Environment-Assisted Cracking of High-Strength Magnesium Alloys WE43-T6
  192. Intergranular Stress Corrosion Crack Propagation in Sensitised Austenitic Stainless Steel (Microstructure Modelling and Experimental Observation)