Contact

All Stories

  1. Research on the Possibility of Lowering the Manufacturing Accuracy of Cycloid Transmission Wheels with Intermediate Rolling Elements and a Free Cage

    Article • Applied Sciences, December 2021, MDPI AG

    Vadim Skeeba

  2. Algorithm for determining the unbalances of continuous mixers rotors

    Article • Journal of Physics Conference Series, October 2021, Institute of Physics Publishing

    Vadim Skeeba

  3. Algorithm for the cams synthesis for the slay mechanism drive

    Article • Journal of Physics Conference Series, October 2021, Institute of Physics Publishing

    Vadim Skeeba

  4. Improving the efficiency of surface-thermal hardening of machine parts in conditions of combination of processing technologies, integrated on a single machine tool base

    Article • Metal Working and Material Science, September 2021, Novosibirsk State Technical University

    Vadim Skeeba

  5. Peculiarities of High-Energy Induction Heating during Surface Hardening in Hybrid Processing Conditions

    Article • Metals, August 2021, MDPI AG

    Vadim Skeeba

  6. Improving the efficiency of metal-bonded diamond abrasive end tools by improving manufacturing technology

    Article • Metal Working and Material Science, June 2021, Novosibirsk State Technical University

    Vadim Skeeba

  7. MEACS-2020

    Article • IOP Conference Series Materials Science and Engineering, February 2021, Institute of Physics Publishing

    Vadim Skeeba

  8. Method for determining the reduced parameters of the mixer gear drive

    Article • IOP Conference Series Materials Science and Engineering, February 2021, Institute of Physics Publishing

    Vadim Skeeba

  9. Automation of composite materials products process preparation

    Article • IOP Conference Series Materials Science and Engineering, December 2020, Institute of Physics Publishing

    Vadim Skeeba

  10. Grinding specifics of plasma coatings melted with high-frequency currents

    Article • IOP Conference Series Materials Science and Engineering, May 2020, Institute of Physics Publishing

    Vadim Skeeba

  11. Synthesis of irregular motion mechanisms for production machine drives

    Article • IOP Conference Series Materials Science and Engineering, May 2020, Institute of Physics Publishing

    Vadim Skeeba

  12. Preface

    Article • IOP Conference Series Materials Science and Engineering, May 2020, Institute of Physics Publishing

    Vadim Skeeba

  13. Investigation of the Process of Automatic Control of Current Polarity Reversal in the Conditions of Hybrid Technology of Electrochemical Processing of Corrosion-Resistant Steels

    Article • Metal Working and Material Science, March 2020, Novosibirsk State Technical University

    Vadim Skeeba

  14. Study of the process of tool forming made of high-strength materials

    Article • IOP Conference Series Materials Science and Engineering, January 2020, Institute of Physics Publishing

    Vadim Skeeba

  15. Ways to implement hybrid finishing technology with a hand-held rotary tool

    Article • IOP Conference Series Materials Science and Engineering, January 2020, Institute of Physics Publishing

    Vadim Skeeba

  16. Determining the operational loads of the hybrid metalworking machines drive

    Article • IOP Conference Series Earth and Environmental Science, November 2019, Institute of Physics Publishing

    Vadim Skeeba

  17. Parametric optimization of hybrid metalworking machinery quality

    Article • IOP Conference Series Earth and Environmental Science, November 2019, Institute of Physics Publishing

    Vadim Skeeba

  18. Surface quality of the plasma cermet coatings after grind finishing

    Article • IOP Conference Series Earth and Environmental Science, November 2019, Institute of Physics Publishing

    Vadim Skeeba

  19. The synthesis of motion laws for cam mechanisms with additional movement of the follower

    Article • IOP Conference Series Earth and Environmental Science, November 2019, Institute of Physics Publishing

    Vadim Skeeba

  20. Hybrid Process Equipment: Improving the Efficiency of the Integrated Metalworking Machines Initial Designing

    Article • Metal Working and Material Science, June 2019, Novosibirsk State Technical University

    Vadim Skeeba

  21. Influence of W Addition on Microstructure and Mechanical Properties of Al-12%Si Alloys

    Article • Materials, March 2019, MDPI AG

    Vadim Skeeba

  22. Effect of Electron Beam Power Density on the Structure of Titanium Under Non-Vacuum Electron-Beam Treatment

    Article • Metal Science and Heat Treatment, January 2019, Springer Science + Business Media

    Vadim Skeeba

  23. Influence of modification by superdispersed powder of aluminum oxide on lead-tin bronze structure

    Article • Journal of Physics Conference Series, December 2018, Institute of Physics Publishing

    Vadim Skeeba

  24. Determining efficient values of continuous technological machines parameters

    Article • IOP Conference Series Earth and Environmental Science, November 2018, Institute of Physics Publishing

    Vadim Skeeba

  25. Efficiency of hybrid equipment combining operations of surface hardening by high frequency currents and abrasive grinding

    Article • IOP Conference Series Earth and Environmental Science, November 2018, Institute of Physics Publishing

    Vadim Skeeba

  26. Increase in wear resistance of nickel plasma coatings under traditional and combined treatment conditions

    Article • IOP Conference Series Earth and Environmental Science, November 2018, Institute of Physics Publishing

    Vadim Skeeba

  27. Reliability of quality forecast for hybrid metal-working machinery

    Article • IOP Conference Series Earth and Environmental Science, November 2018, Institute of Physics Publishing

    Vadim Skeeba

  28. Features of Machine Cyclogram Optimization with the Account of Interaction of Mechanism Links with Stops

    Article • Metal Working and Material Science, March 2018, Novosibirsk State Technical University

    Vadim Skeeba

  29. Change of the Phase Composition and Strength of Al2O3–ZrO2-Ceramic After Hydrothermal Aging

    Article • Glass and Ceramics, March 2018, Springer Science + Business Media

    Vadim Skeeba

  30. Kinematic analysis of crank -cam mechanism of process equipment

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Vadim Skeeba

  31. Modeling knee joint endoprosthesis mode of deformation

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Vadim Skeeba

  32. Motion laws synthesis for cam mechanisms with multiple follower displacement

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Vadim Skeeba

  33. Research into properties of wear resistant ceramic metal plasma coatings

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Vadim Skeeba

  34. IMPROVING EFFICIENCY OF CONTINUOUS MIXERS WITH AN OSCILLATION MECHANISM

    Article • iPolytech Journal, January 2018, Irkutsk National Research Technical University

    Vadim Skeeba

  35. Defining efficient modes range for plasma spraying coatings

    Article • IOP Conference Series Earth and Environmental Science, October 2017, Institute of Physics Publishing

    Vadim Skeeba

  36. Experimental determination of useful resistance value during pasta dough kneading

    Article • IOP Conference Series Earth and Environmental Science, October 2017, Institute of Physics Publishing

    Vadim Skeeba

  37. Physical-chemical processes of diamond grinding

    Article • IOP Conference Series Earth and Environmental Science, October 2017, Institute of Physics Publishing

    Vadim Skeeba

  38. Enhancing the Effectiveness of the Diamond Metal Bond Instrument when Grinding High-Strength Materials

    Article • Metal Working and Material Science, September 2017, Novosibirsk State Technical University

    Vadim Skeeba

  39. Cam mechanism designing with account of the technological load and energy costs

    Article • Metal Working and Material Science, June 2017, Novosibirsk State Technical University

    Vadim Skeeba

  40. The Research into the Effect of Conditions of Combined Electric Powered Diamond Processing on Cutting Power

    Article • Key Engineering Materials, June 2017, Trans Tech Publications

    Vadim Skeeba

  41. Integrated Quality Ensuring Technique of Plasma Wear Resistant Coatings

    Article • Key Engineering Materials, June 2017, Trans Tech Publications

    Vadim Skeeba

  42. The method of quantitative automatic metallographic analysis

    Article • Journal of Physics Conference Series, January 2017, Institute of Physics Publishing

    Vadim Skeeba

  43. Determination of the rigidity and deformation energy of the technological machine load-carrying systems

    Article • Metal Working and Material Science, December 2016, Novosibirsk State Technical University

    Vadim Skeeba

  44. Formation of high-carbon abrasion-resistant surface layers when high-energy heating by high-frequency currents

    Article • IOP Conference Series Materials Science and Engineering, November 2016, Institute of Physics Publishing

    Vadim Skeeba

  45. The features of steel surface hardening with high energy heating by high frequency currents and shower cooling

    Article • IOP Conference Series Materials Science and Engineering, November 2016, Institute of Physics Publishing

    Vadim Skeeba

  46. Numerical Simulation of Temperature Field in Steel under Action of Electron Beam Heating Source

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    Vadim Skeeba

  47. Research of Influence Electric Conditions Combined ElectroDiamond Processing by on Specific Consumption of Wheel*

    Article • IOP Conference Series Materials Science and Engineering, August 2016, Institute of Physics Publishing

    Vadim Skeeba

  48. The methods of technological machines’ rotors balance

    Article • Metal Working and Material Science, June 2016, Novosibirsk State Technical University

    Vadim Skeeba

  49. Hybrid Processing: the Impact of Mechanical and Surface Thermal Treatment Integration onto the Machine Parts Quality

    Article • IOP Conference Series Materials Science and Engineering, April 2016, Institute of Physics Publishing

    Vadim Skeeba

  50. Integrated Processing: Quality Assurance Procedure of the Surface Layer of Machine Parts during the Manufacturing Step "Diamond Smoothing"

    Article • IOP Conference Series Materials Science and Engineering, April 2016, Institute of Physics Publishing

    Vadim Skeeba

  51. Selection of form factors of machine carrying systems in reliance on the process duty

    Article • Metal Working and Material Science, December 2015, Novosibirsk State Technical University

    Vadim Skeeba

  52. Technological features of forming the quality characteristics of the surface layer during diamond smoothing in the integrated processing

    Article • Metal Working and Material Science, September 2015, Novosibirsk State Technical University

    Vadim Skeeba

  53. Simulation of Structure Formation Processes of Dissimilar Steels Welded Joints Using an Intermediate Layer

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Vadim Skeeba

  54. Quality Improvement of Wear-Resistant Coatings in Plasma Spraying Integrated with High-Energy Heating by High Frequency Currents

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Vadim Skeeba

  55. Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Vadim Skeeba

  56. Numerical Modeling of Steel Surface Hardening in the Process of High Energy Heating by High Frequency Currents

    Article • Applied Mechanics and Materials, December 2014, Trans Tech Publications

    Vadim Skeeba

  57. Perspective of High Energy Heating Implementation for Steel Surface Saturation with Carbon

    Article • Applied Mechanics and Materials, December 2014, Trans Tech Publications

    Vadim Skeeba

  58. Integration of Production Steps on a Single Equipment

    Article • Materials and Manufacturing Processes, October 2014, Taylor & Francis

    Vadim Skeeba

  59. Metal Working and Material Science

    Article • Metal Working and Material Science, Novosibirsk State Technical University

    Vadim Skeeba