All Stories

  1. Hybrid Virtual Impedance-based Control Strategy for DFIG in Hybrid Wind Farm to Disperse Negative Sequence Current during Networ

    Article • IET Renewable Power Generation, May 2020, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  2. Investigation of a hybrid excited doubly salient machine with permanent magnets located on stator slot openings

    Article • IET Electric Power Applications, April 2020, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  3. Research on a Hybrid Excitation PM Synchronous Generator with Stator Third Harmonic Winding Excitation

    Article • IET Electric Power Applications, December 2019, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  4. Influence of static and dynamic rotor/stator misalignments in axial flux magnetically geared machines

    Article • The Journal of Engineering, June 2019, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  5. Comparison of optimal slot/pole number combinations in fractional slot permanent magnet synchronous machines having similar slot and pole numbers

    Article • The Journal of Engineering, January 2019, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  6. Overview of Novel Magnetically Geared Machines with Partitioned Stators

    Article • IET Electric Power Applications, March 2018, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  7. Analysis of parasitic effects in carrier signal injection methods for sensorless control of PM synchronous machines

    Article • IET Electric Power Applications, February 2018, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  8. Flexible unbalance compensation strategy for doubly fed induction generator based on a novel indirect virtual impedance method

    Article • IET Renewable Power Generation, January 2018, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  9. Investigation on synchronous reluctance machines with different rotor topologies and winding configurations

    Article • IET Electric Power Applications, January 2018, the Institution of Engineering and Technology (the IET)

    Z Q Zhu, Dr Guangjin Li

  10. Design considerations for high power converters interfacing 10 MW superconducting wind power generators

    Article • IET Power Electronics, May 2017, the Institution of Engineering and Technology (the IET)

    Dr Guangjin Li, Z Q Zhu, Dr Francisco Vedreño Santos

  11. Carrier Signal Injection Based Sensorless Control for PMSM Drives with Tolerance of Signal Processing Delays

    Article • IET Electric Power Applications, March 2017, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  12. Unbalanced Magnetic Force Prediction in Permanent Magnet Machines with Rotor Eccentricity by Improved Superposition Method

    Article • IET Electric Power Applications, March 2017, the Institution of Engineering and Technology (the IET)

    Qinfen Lu, Z Q Zhu

  13. Investigation of Irreversible Demagnetization Mechanism in Switched Flux Permanent Magnet Machines under Short-Circuit Conditions

    Article • IET Electric Power Applications, February 2017, the Institution of Engineering and Technology (the IET)

    Dr Guangjin Li, Z Q Zhu

  14. Improved position offset based parameter determination of permanent magnet synchronous machines under different load conditions

    Article • IET Electric Power Applications, February 2017, the Institution of Engineering and Technology (the IET)

    Dr Kan Liu, Z Q Zhu

  15. Design Guidelines for Fractional Slot Multi-Phase Modular Permanent Magnet Machines

    Article • IET Electric Power Applications, January 2017, the Institution of Engineering and Technology (the IET)

    Dr Guangjin Li, Z Q Zhu

  16. Iron loss calculation considering temperature influence in non-oriented steel laminations

    Article • IET Science Measurement & Technology, November 2016, the Institution of Engineering and Technology (the IET)

    Dr Shaoshen Xue, Z Q Zhu

  17. Comparison of electromagnetic performance of switched flux permanent magnet machines with mechanical flux adjusters

    Article • IET Electrical Systems in Transportation, December 2015, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  18. Comparative study of the electromagnetic performance of switched flux permanent magnet machines

    Article • IET Electric Power Applications, April 2015, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  19. Influence of machine design parameters on flux-weakening performance of induction machine for electrical vehicle application

    Article • IET Electrical Systems in Transportation, March 2015, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  20. Torque ripple reduction of synchronous reluctance machines: using asymmetric flux-barrier

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 2015, Emerald

    Grzegorz Ombach, Professor Kai Wang, Z Q Zhu

  21. Torque ripple reduction of synchronous reluctance machines

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 2015, Emerald

    Grzegorz Ombach, Professor Kai Wang, Z Q Zhu

  22. Modified switching-table strategy for reduction of current harmonics in direct torque controlled dual-three-phase permanent magnet synchronous machine drives

    Article • IET Electric Power Applications, January 2015, the Institution of Engineering and Technology (the IET)

    Z Q Zhu

  23. Torque ripple and magnetic forces on teeth in IPM machines

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, August 2014, Emerald

    Grzegorz Ombach, Professor Kai Wang, Z Q Zhu

  24. Influence of Stator/Rotor Pole Combination on Electromagnetic Performance in All/Alternate Poles Wound Partitioned Stator Doubly Salient Permanent Magnet Machines

    Article • The Journal of Engineering, February 2009, the Institution of Engineering and Technology (the IET)

    Z Q Zhu