All Stories

  1. Molecular Design of a “Soft–Hard–Soft” Bio-Based Compatibilizer to Create Reinforced Interfacial Gradients in Poly(lactic acid) (PLA) Blends

    Article • Polymer, March 2026, Elsevier

    Dr yun-xuan weng

  2. Sustainable 3D Printing of PLA / PBAT /Bamboo Fiber Bio‐Composites: Interfacial Compatibility Regul...

    Article • Polymer Composites, January 2026, Wiley

    Dr yun-xuan weng

  3. NaNbO3 regulation for long endurance persulfate activation via photo-piezoelectric synergistic catalysis

    Article • January 2026, Elsevier

    Dr yun-xuan weng

  4. Thermal-responsive heterogeneous organohydrogels with on-demand oil-release capabilities

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, August 2025, Elsevier

    Dr yun-xuan weng

  5. Photocatalytic and Electrocatalytic C–H Functionalization: Sustainable Pathways for Polymer Upcycling

    Article • ChemSusChem, July 2025, Wiley

    Dr yun-xuan weng

  6. Nonlinear learning-enhanced MLP-driven design of PIMs gas separation membranes beyond Robeson upper bounds

    Article • Journal of Membrane Science, July 2025, Elsevier

    Dr yun-xuan weng

  7. NaOH/Urea-Compatible Chitosan/Carboxymethylcellulose Films: Orthogonal Optimization of Packaging Properties

    Article • Molecules, May 2025, MDPI AG

    Dr yun-xuan weng

  8. Comparative study on crystallization behaviour of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nucleated with different nucleating agents - Crystallization, thermal, and mechanical properties

    Article • Polymer, May 2025, Elsevier

    Dr yun-xuan weng

  9. Enhanced Xylan/PVA Composite Films via Nano-ZnO Reinforcement for Sustainable Food Packaging

    Article • Polymers, April 2025, MDPI AG

    Dr yun-xuan weng

  10. Carbon quantum dots modified MoS2 for high-efficiency and long-endurance persulfate activation: Enhanced electron transfer and piezoelectricity

    Article • Separation and Purification Technology, January 2025, Elsevier

    Dr yun-xuan weng

  11. THE PREPARATION AND CHARACTERIZATION OF A LANTHANUM-BASED RARE EARTH CONVERSION COATING ON MAGNESIUM ALLOY AZ91D AND ITS DEGRADATION IN 3.5% NaCl SOLUTION

    Article • Surface Review and Letters, September 2024, World Scientific Pub Co Pte Lt

    Dr yun-xuan weng

  12. Epoxidized Soybean Oil Toughened Poly(lactic acid)/Lignin-g-Poly(lauryl methacrylate) Bio-Composite Films with Potential Food Packaging Application

    Article • Polymers, July 2024, MDPI AG

    Dr yun-xuan weng

  13. Biodegradation behavior of poly (glycolic acid) (PGA) and poly (butylene adipate-co-terephthalate) (PBAT) blend films in simulation marine environment

    Article • Polymer, July 2024, Elsevier

    Dr yun-xuan weng

  14. Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments

    Article • Polymers, June 2024, MDPI AG

    Dr yun-xuan weng

  15. Sustainable improvement in the polylactic acid properties of 3D printing filaments: The role of bamboo fiber and epoxidized soybean oil‐branched cardanol ether compatibilizer

    Article • Polymer Composites, May 2024, Wiley

    Dr yun-xuan weng

  16. Natural Extracts and Their Applications in Polymer-Based Active Packaging: A Review

    Article • Polymers, February 2024, MDPI AG

    Dr yun-xuan weng

  17. Modified Biomass-Reinforced Polylactic Acid Composites

    Article • Materials, January 2024, MDPI AG

    Dr yun-xuan weng

  18. Facile synthesis of phosphorus-containing benzotriazole flame retardant for enhancement of mechanical and fire properties of epoxy resins

    Article • European Polymer Journal, January 2024, Elsevier

    Dr yun-xuan weng

  19. Development of PLA/Lignin Bio-Composites Compatibilized by Ethylene Glycol Diglycidyl Ether and Poly (ethylene glycol) Diglycidyl Ether

    Article • Polymers, October 2023, MDPI AG

    Dr yun-xuan weng

  20. Improved artificial neural networks (ANNs) for predicting the gas separation performance of polyimides

    Article • Journal of Membrane Science, September 2023, Elsevier

    Dr yun-xuan weng

  21. Molecular Dynamics Simulation of Polymer Nanocomposites with Supramolecular Network Constructed via Functionalized Polymer End-Grafted Nanoparticles

    Article • Polymers, July 2023, MDPI AG

    Dr yun-xuan weng

  22. Reprocessable, chemically recyclable, and flame-retardant biobased epoxy vitrimers

    Article • European Polymer Journal, July 2023, Elsevier

    Dr yun-xuan weng

  23. Enhancing Hydrophobicity and Oxygen Barrier of Xylan/PVOH Composite Film by 1,2,3,4-Butane Tetracarboxylic Acid Crosslinking

    Article • Polymers, June 2023, MDPI AG

    Dr yun-xuan weng

  24. Polylactic Acid/Lignin Composites: A Review

    Article • Polymers, June 2023, MDPI AG

    Dr yun-xuan weng

  25. Cardanol derivatives as compatibilizers for strengthening and toughening polylactic acid/bamboo fiber bio‐composites

    Article • Polymer Composites, June 2023, Wiley

    Dr yun-xuan weng

  26. Achieving absorption-type microwave shielding performance in polydimethylsiloxane/carbon nanotube sandwiched composites via regulating microwave interference effect

    Article • Composites Part A Applied Science and Manufacturing, June 2023, Elsevier

    Dr yun-xuan weng

  27. Epoxidized isosorbide-based esters with long alkyl chains as efficient and enhanced thermal stability and migration resistance PVC plasticizers

    Article • Polymer Testing, June 2023, Elsevier

    Dr yun-xuan weng

  28. Weak visible-light photo-piezoelectric synergistic catalyst based on the Bi2Fe4O9/Carbon-dots/g-C3N4 heterostructure

    Article • Surfaces and Interfaces, June 2023, Elsevier

    Dr yun-xuan weng

  29. Synthesis and Characterization of a Novel Composite Edible Film Based on Hydroxypropyl Methyl Cellulose Grafted with Gelatin

    Article • Gels, April 2023, MDPI AG

    Dr yun-xuan weng

  30. A Hydrotalcite-Based PET Composites with Enhanced Properties for Liquid Milk Packaging Applications

    Article • Materials, February 2023, MDPI AG

    Dr yun-xuan weng

  31. Elucidation of Non-Intentionally Added Substances from Plant Fiber/Plastic Composites by UPLC-QTOF/MS

    Article • Foods, February 2023, MDPI AG

    Dr yun-xuan weng

  32. Effect of Biomass as Nucleating Agents on Crystallization Behavior of Polylactic Acid

    Article • Polymers, October 2022, MDPI AG

    Dr yun-xuan weng

  33. Recent Advances in PLA-Based Antibacterial Food Packaging and Its Applications

    Article • Molecules, September 2022, MDPI AG

    Dr yun-xuan weng

  34. Recent Advances in Cellulose-Based Hydrogels for Tissue Engineering Applications

    Article • Polymers, August 2022, MDPI AG

    Dr yun-xuan weng

  35. Promotion Strategy of Ideological and Political Education Management in Colleges and Universities Using Clustering Techniques

    Article • Mobile Information Systems, June 2022, Wiley

    Dr yun-xuan weng

  36. Kinetic analysis of PGA/PBAT plastic films for strawberry fruit preservation quality and enzyme activity

    Article • Journal of Food Composition and Analysis, May 2022, Elsevier

    Dr yun-xuan weng

  37. Biodegradation Behavior of Degradable Mulch with Poly (Butylene Adipate-co-Terephthalate) (PBAT) and Poly (Butylene Succinate) (PBS) in Simulation Marine Environment

    Article • Polymers, April 2022, MDPI AG

    Dr yun-xuan weng

  38. Fabrication and Characterization of Gelatin/Polyvinyl Alcohol Composite Scaffold

    Article • Polymers, March 2022, MDPI AG

    Dr yun-xuan weng

  39. Progress in the Development of Graphene-Based Biomaterials for Tissue Engineering and Regeneration

    Article • Materials, March 2022, MDPI AG

    Dr yun-xuan weng

  40. Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis

    Article • Polymers, March 2022, MDPI AG

    Dr yun-xuan weng

  41. Properties and Degradability of Poly(Butylene Adipate-Co-Terephthalate)/Calcium Carbonate Films Modified by Polyethylene Glycol

    Article • Polymers, January 2022, MDPI AG

    Dr yun-xuan weng

  42. Safety Risks of Plant Fiber/Plastic Composites (PPCs) Intended for Food Contact: A Review of Potential Hazards and Risk Management Measures

    Article • Toxics, December 2021, MDPI AG

    Dr yun-xuan weng

  43. Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers

    Article • Polymers, November 2021, MDPI AG

    Dr yun-xuan weng

  44. Enhancement of Mechanical and Barrier Property of Hemicellulose Film via Crosslinking with Sodium Trimetaphosphate

    Article • Polymers, March 2021, MDPI AG

    Dr yun-xuan weng

  45. A Review: Research Progress in Modification of Poly (Lactic Acid) by Lignin and Cellulose

    Article • Polymers, March 2021, MDPI AG

    Dr yun-xuan weng

  46. Barrier Film of Etherified Hemicellulose from Single-Step Synthesis

    Article • Polymers, September 2020, MDPI AG

    Dr yun-xuan weng

  47. Biodegradation Behavior of Poly(Butylene Adipate-Co-Terephthalate) (PBAT), Poly(Lactic Acid) (PLA), and Their Blend in Freshwater with Sediment

    Article • Molecules, August 2020, MDPI AG

    Dr yun-xuan weng

  48. Hemicellulose-Based Film: Potential Green Films for Food Packaging

    Article • Polymers, August 2020, MDPI AG

    Dr yun-xuan weng

  49. Controllable synthesis and microwave absorption properties of Fe3O4@f-GNPs nanocomposites

    Article • Composites Communications, August 2020, Elsevier

    Dr yun-xuan weng

  50. Enhancement of Gas Barrier Properties of Graphene Oxide/Poly (Lactic Acid) Films Using a Solvent-free Method

    Article • Materials, July 2020, MDPI AG

    Dr yun-xuan weng

  51. A Review on the Contemporary Development of Composite Materials Comprising Graphene/Graphene Derivatives

    Article • Advances in Materials Science and Engineering, February 2020, Hindawi Publishing Corporation

    Dr yun-xuan weng

  52. Effect of Diisocyanates as Compatibilizer on the Properties of BF/PBAT Composites by In Situ Reactive Compatibilization, Crosslinking and Chain Extension

    Article • Materials, February 2020, MDPI AG

    Dr yun-xuan weng

  53. Poly(lactic acid)/lignin films with enhanced toughness and anti-oxidation performance for active food packaging

    Article • International Journal of Biological Macromolecules, February 2020, Elsevier

    Dr yun-xuan weng

  54. Achieving highly crystalline rate and crystallinity in Poly(l-lactide) via in-situ melting reaction with diisocyanate and benzohydrazine to form nucleating agents

    Article • Polymer Testing, January 2020, Elsevier

    Dr yun-xuan weng

  55. Synthesis of PLA-based thermoplastic elastomer and study on preparation and properties of PLA-based shape memory polymers

    Article • Materials Research Express, December 2019, Institute of Physics Publishing

    Dr yun-xuan weng

  56. Achieving Slope-Reigned Na-Ion Storage in Carbon Nanofibers by Constructing Defect-Rich Texture by a Cu-Activation Strategy

    Article • ACS Applied Materials & Interfaces, December 2019, American Chemical Society (ACS)

    Dr yun-xuan weng

  57. Silicone Rubber Composites with High Breakdown Strength and Low Dielectric Loss Based on Polydopamine Coated Mica

    Article • Polymers, December 2019, MDPI AG

    Dr yun-xuan weng

  58. Biodegradable PLA/PBAT mulch on microbial community structure in different soils

    Article • International Biodeterioration & Biodegradation, November 2019, Elsevier

    Dr yun-xuan weng

  59. Robust and nanoparticle-free superhydrophobic cotton fabric fabricated from all biological resources for oil/water separation

    Article • International Journal of Biological Macromolecules, November 2019, Elsevier

    Dr yun-xuan weng

  60. Adjusting Distribution of Multiwall Carbon Nanotubes in Poly(L-lactide)/Poly(oxymethylene) Blends via Constructing Stereocomplex Crystallites: Toward Conductive and Microwave Shielding Enhancement

    Article • The Journal of Physical Chemistry C, October 2019, American Chemical Society (ACS)

    Dr yun-xuan weng

  61. Structure-property relationship in fully biobased epoxidized soybean oil thermosets cured by dicarboxyl terminated polyamide 1010 oligomer with different carboxyl/epoxy ratios

    Article • Polymer Testing, October 2019, Elsevier

    Dr yun-xuan weng

  62. Biodegradation Behavior of Poly (Lactic Acid) (PLA), Poly (Butylene Adipate-Co-Terephthalate) (PBAT), and Their Blends Under Digested Sludge Conditions

    Article • Journal of Polymers and the Environment, September 2019, Springer Science + Business Media

    Dr yun-xuan weng

  63. Effect of organic solvent on enzymatic degradation of cyclic PBS-based polymers by lipase N435

    Article • International Journal of Biological Macromolecules, September 2019, Elsevier

    Dr yun-xuan weng

  64. Fully biobased polylactide/epoxidized soybean oil resin blends with balanced stiffness and toughness by dynamic vulcanization

    Article • Polymer Testing, September 2019, Elsevier

    Dr yun-xuan weng

  65. Fully Sustainable, Nanoparticle-Free, Fluorine-Free, and Robust Superhydrophobic Cotton Fabric Fabricated via an Eco-Friendly Method for Efficient Oil/Water Separation

    Article • ACS Sustainable Chemistry & Engineering, August 2019, American Chemical Society (ACS)

    Dr yun-xuan weng

  66. Malleable and Sustainable Poly(ester amide) Networks Synthesized via Melt Condensation Polymerization

    Article • ACS Sustainable Chemistry & Engineering, August 2019, American Chemical Society (ACS)

    Dr yun-xuan weng

  67. Thermo-sensitive micelles based on amphiphilic poly(butylene 2-methylsuccinate)-poly(ethylene glycol) multi-block copolyesters as the pesticide carriers

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, August 2019, Elsevier

    Dr yun-xuan weng

  68. Toward durable and robust superhydrophobic cotton fabric through hydrothermal growth of ZnO for oil/water separation

    Article • Cellulose, July 2019, Springer Science + Business Media

    Dr yun-xuan weng

  69. Fabrication and Application of Carboxymethyl Cellulose-Carbon Nanotube Aerogels

    Article • Materials, June 2019, MDPI AG

    Dr yun-xuan weng

  70. Localization control of carbon nanotubes in immiscible polymer blends through dynamic vulcanization

    Article • Composites Part B Engineering, June 2019, Elsevier

    Dr yun-xuan weng

  71. Preparation and Gas Separation Properties of Triptycene‐Based Microporous Polyimide

    Article • Macromolecular Chemistry and Physics, April 2019, Wiley

    Dr yun-xuan weng

  72. Preparation and properties of PLA/PHBV/PBAT blends 3D printing filament

    Article • Materials Research Express, March 2019, Institute of Physics Publishing

    Dr yun-xuan weng

  73. Effects of Sodium Montmorillonite on the Preparation and Properties of Cellulose Aerogels

    Article • Polymers, March 2019, MDPI AG

    Dr yun-xuan weng

  74. BTBUFood-60: Dataset for Object Detection in Food Field

    Article • February 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr yun-xuan weng

  75. Simultaneously reinforcing and toughening of poly(propylene carbonate) by epoxy-terminated hyperbranched polymer(EHBP) through micro-crosslinking

    Article • Polymer Bulletin, January 2019, Springer Science + Business Media

    Dr yun-xuan weng

  76. Achieving high dielectric permittivity, high breakdown strength and high efficiency by cross-linking of poly(vinylidene fluoride)/BaTiO3 nanocomposites

    Article • Composites Science and Technology, January 2019, Elsevier

    Dr yun-xuan weng

  77. Manufacture of a hydrophobic CaO/polylactic acid composite

    Article • Materials and Manufacturing Processes, November 2018, Taylor & Francis

    Dr yun-xuan weng

  78. Design of a self-healing cross-linked polyurea with dynamic cross-links based on disulfide bonds and hydrogen bonding

    Article • European Polymer Journal, October 2018, Elsevier

    Dr yun-xuan weng

  79. Influence of ether linkage on the enzymatic degradation of PBS copolymers: Comparative study on poly (butylene succinate- co -diethylene glycol succinate) and poly (butylene succinate- co -butylene diglycolic acid)

    Article • International Journal of Biological Macromolecules, October 2018, Elsevier

    Dr yun-xuan weng

  80. Optimization of the preparation process of biodegradable masterbatches and characterization of their rheological and application properties

    Article • Polymer Testing, September 2018, Elsevier

    Dr yun-xuan weng

  81. Poly(lactic acid)/biobased polyurethane blends with balanced mechanical strength and toughness

    Article • Polymer Testing, August 2018, Elsevier

    Dr yun-xuan weng

  82. The Investigation of the Toughening Mechanism of PHBV/PBAT with a Novel Hyperbranched Ethylenediamine Triazine Polymer Based Modifier: The Formation of the Transition Layer and the Microcrosslinking Structure

    Article • Journal of Polymers and the Environment, July 2018, Springer Science + Business Media

    Dr yun-xuan weng

  83. Improved dielectric and energy storage properties of poly(vinyl alcohol) nanocomposites by strengthening interfacial hydrogen-bonding interaction

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, July 2018, Elsevier

    Dr yun-xuan weng

  84. Influence of ether bond on degradation property of PBS-based copolymers at molecular level using molecular simulations

    Article • Journal of Polymer Research, June 2018, Springer Science + Business Media

    Dr yun-xuan weng

  85. Cellulose Aerogels: Synthesis, Applications, and Prospects

    Article • Polymers, June 2018, MDPI AG

    Dr yun-xuan weng

  86. Relating Chemical Structure to Toughness via Morphology Control in Fully Sustainable Sebacic Acid Cured Epoxidized Soybean Oil Toughened Polylactide Blends

    Article • Macromolecules, February 2018, American Chemical Society (ACS)

    Dr yun-xuan weng

  87. Effect of Bamboo Flour Grafted Lactide on the Interfacial Compatibility of Polylactic Acid/Bamboo Flour Composites

    Article • Polymers, July 2017, MDPI AG

    Dr yun-xuan weng

  88. An investigation of the impact of an amino-ended hyperbranched polymer as a new type of modifier on the compatibility of PLA/PBAT blends

    Article • Journal of Power Electronics, July 2017, De Gruyter

    Dr yun-xuan weng

  89. Extracting compressive stress-strain curve based on stick-slip shear banding process in bulk metallic glasses

    Article • Journal of Iron and Steel Research International, April 2017, Springer Science + Business Media

    Dr yun-xuan weng

  90. Special topic on bio-based and biodegradable polymers

    Article • Science China Chemistry, October 2016, Springer Science + Business Media

    Dr yun-xuan weng

  91. Modification of poly(propylene carbonate) with chain extender ADR-4368 to improve its thermal, barrier, and mechanical properties

    Article • Polymer Testing, September 2016, Elsevier

    Dr yun-xuan weng

  92. Modeling and Simulation of a Co-current Rotary Dryer

    Article • International Journal of Food Engineering, January 2016, De Gruyter

    Dr yun-xuan weng

  93. Preparation and characterization of biodegradable blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and poly(butylene adipate-co-terephthalate)

    Article • Journal of Power Electronics, January 2016, De Gruyter

    Dr yun-xuan weng

  94. Intrinsic versus extrinsic effects on serrated flow of bulk metallic glasses

    Article • Intermetallics, November 2015, Elsevier

    Dr yun-xuan weng, Prof. Yong Yang

  95. Chain extension and modification of polypropylene carbonate using diphenylmethane diisocyanate

    Article • Polymer International, June 2015, Wiley

    Dr yun-xuan weng

  96. Characterization of the effect of REC on the compatibility of PHBH and PLA

    Article • Polymer Testing, April 2015, Elsevier

    Dr yun-xuan weng

  97. Heat resistance, crystallization behavior, and mechanical properties of polylactide/nucleating agent composites

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Dr yun-xuan weng

  98. Modeling the Total Residence Time in a Rotary Dryer

    Article • International Journal of Food Engineering, January 2015, De Gruyter

    Dr yun-xuan weng

  99. Effect of blending with polyamidoamine (PAMAM) dendrimer on the toughness of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)

    Article • Journal of Materials Science, October 2014, Springer Science + Business Media

    Dr yun-xuan weng

  100. Characterization of interfacial compatibility of polylactic acid and bamboo flour (PLA/BF) in biocomposites

    Article • Polymer Testing, June 2014, Elsevier

    Dr yun-xuan weng

  101. The Development and Commercialization of Biobased, Biodegradable Plastics in China

    Article • Industrial Biotechnology, April 2014, Mary Ann Liebert Inc

    Dr yun-xuan weng

  102. Biodegradation behavior of poly(butylene adipate-co-terephthalate) (PBAT), poly(lactic acid) (PLA), and their blend under soil conditions

    Article • Polymer Testing, August 2013, Elsevier

    Dr yun-xuan weng

  103. Biodegradation behavior of P(3HB,4HB)/PLA blends in real soil environments

    Article • Polymer Testing, February 2013, Elsevier

    Dr yun-xuan weng

  104. Biodegradation behavior of PHAs with different chemical structures under controlled composting conditions

    Article • Polymer Testing, June 2011, Elsevier

    Dr yun-xuan weng

  105. Biodegradation behavior of PHBV films in a pilot-scale composting condition

    Article • Polymer Testing, August 2010, Elsevier

    Dr yun-xuan weng