All Stories

  1. Enhancement of the melting process in the thermal energy storage system by using novel geometry
  2. Energy utilisation in a combined geothermal and organic Rankine power cycles
  3. Modelling of a novel infrared recycler for reclaiming waste plastics from automotive vehicles
  4. Using novel compressed-air energy storage systems as a green strategy in sustainable power generation-a review
  5. Using a smart device and neuro-fuzzy control system as a sustainable initiative with green cars
  6. Energy conservation and waste utilization in the cement industry serve the green technology and environment
  7. Performance improvement of green cars by using variable-geometry engines
  8. Cascaded waste-heat recovery as a green technology for energy sustainability in power generation
  9. Performance analysis of green engine-driven systems for space cooling
  10. Sustainable gas turbine power generation by adopting green control technologies
  11. Using a Smart Device and Intelligent Control to Reduce Green Vehicle Emissions
  12. The Road Toward Greener Cars by Using Neuro-Fuzzy Modeling of Spark-Ignition Engines with Variable Valve Overlap
  13. Protection of the environment by using innovative greening technologies in land transport
  14. Hydrogen safety: The road toward green technology
  15. Thermoeconomic optimization for green multi-shaft gas turbine engines
  16. Modeling the Effect of Variable Timing of the Exhaust Valves on SI Engine Emissions for Greener Vehicles
  17. Green solution for power generation by adoption of adiabatic CAES system
  18. Mahmoud Yousef K. El-Najjar (1942–2009)
  19. Power augmentation with CAES (compressed air energy storage) by air injection or supercharging makes environment greener
  20. Comparison of performance of a Greener direct-injection stratified-charge (DISC) engine with a spark-ignition engine using a simplified model
  21. Comparison of performance of compact chamber spark-ignition engine with conventional S.I. engine
  22. Gaseous Pollutants Formation and Their Harmful Effects on Health and Environment
  23. The role of neuro-fuzzy modelling as a greening technique, in improving the performance of vehicular spark ignition engine
  24. Aerothermal Design of a Multi-Stage Axial Flow Gas Turbine with Air Cooling
  25. Alternative Fuels for Spark Ignition Engines
  26. Alternative Fuels for Spark Ignition Engines
  27. Comparison of performance for cascaded humidified advanced turbine with the corresponding combined system
  28. Modern and appropriate technologies for the reduction of gaseous pollutants and their effects on the environment
  29. Thermodynamic optimization of the turbofan cycle
  30. Comparative performance of combined gas turbine systems under three different blade cooling schemes
  31. Heat transfer analysis for a multistage gas turbine using different blade-cooling schemes
  32. Directions and perspectives for development of engineering education in Jordan
  33. Effect of Prewhirl on the Performance of Centrifugal Compressors
  34. Effect of Prewhirl on the Performance of Centrifugal Compressors
  35. Efficient use of energy by utilizing gas turbine combined systems
  36. Gas turbine cogeneration systems: a review of some novel cycles
  37. Comparison of performance of the integrated gas and steam cycle (IGSC) with the combined cycle (CC)
  38. Performance analysis of compressed air energy storage (CAES) plant for dry regions
  39. PARAMETRIC STUDY OF THE RESIDUAL GAS IN SPARK IGNITION ENGINES
  40. Determination of thermodynamic properties of some engineering fluids using two-constant equations of state
  41. Comparison of performance for cogeneration systems using single- or twin-shaft gas turbine engines
  42. Some trends and progress in gas turbine technology and research
  43. MODELING AND SIMULATION OF SPARK IGNITION ENGINES
  44. MODELING AND SIMULATION OF COMPRESSION IGNITION ENGINES
  45. Relative effect of pressure losses and inefficiencies of turbomachines on the performance of the heat-exchange gas turbine cycle
  46. Performance analysis of gas turbine air-bottoming combined system
  47. Enhancement of performance of gas turbine engines by inlet air cooling and cogeneration system
  48. Boosting Aeroengine Thrust by Using Ramjets
  49. Performance of simple cycle gas turbine engines in two modes of operation
  50. Cryogenic power conversion with regasification of LNG in a gas turbine plant
  51. A POTENTIALLY CAPABLE KODEL FOR PREDICTING COMBUSTOR LINER TEMPERATURE IN CAS TURBINES
  52. Comparative performance of closed cycle gas turbine engine with heat recovery using different gases
  53. Comparison of total energy systems using gas turbines and diesel engines for combined cooling
  54. Energy conservation in the refinery by utilizing reformed fuel gas and furnace flue gases
  55. Energy Conservation With Catalytic Cracking in the Refinery
  56. Feasibility of gas turbine-assisted heat pumps for space heating
  57. Forced Draft Cooling Tower Performance with Diesel Power Stations
  58. Fuel effect on vehicular gas turbine engine performance
  59. Cogeneration by combining gas turbine engine with organic rankine cycle
  60. PERFORMANCE OF AUTOMOTIVE RECIPROCATING ENGINES WITH DIFFERENT FUELS
  61. EVALUATION OF PENG ROBINSON EQUATION OF STATE IN CALCULATING THERMOPHYSICAL PROPERTIES OF COMBUSTION GASES
  62. Evaluation of srk equation of state in calculating the thermophysical properties of gas turbine combustion gases
  63. Prediction of Gas Turbine Combustor-Liner Temperature
  64. Lubricants and fuels analysis as a guide for predictive maintenance in diesel engines
  65. Prediction of some performance characteristics of shale oil in the gas turbine combustor
  66. SOOT FORMATION IN GAS TURBINE COMBUSTORS
  67. Waste Energy Utilization in Regenerative Gas Turbine Cycles
  68. Gas-turbine total energy systems
  69. The solar gas turbine for pump and electric generator drive
  70. The Part-Load Performance of a Gas Turbine Engine With Two Turbines Working in Parallel
  71. Temperature traverse quality in the gas turbine combustor using heavy fuels
  72. Fuel Effect on Reciprocating Engine Performance
  73. Gibbs function as a correlating performance parameter for fuels used in gas turbines
  74. Waste energy utilization in heat-exchange gas turbine cycles
  75. A Developed Model for the Prediction of Soot Formation and Oxidation in the Gas Turbine
  76. Engineering prediction of soot concentration in the primary zone of the gas turbine combustor
  77. Temperature Traverse Quality in the Gas Turbine Combustor Using Heavy Fuels
  78. Soot formation in gas turbines using heavy fuels. 1
  79. Soot oxidation in gas turbines using heavy fuels. 2