All Stories

  1. Investigating the impact of reaction time on hydrothermal synthesis of Co(OH)2 electrodes and their symmetric device performance
  2. Electron‐Deficient Mn Sites Functionalized with Ag Nanoclusters Enable Selective and Durable Seawater Oxidation
  3. A predictive formalism based on chi-square fitting for size & shape dependent estimation of bandgaps of nanomaterials
  4. Influence of Sr2+ doping on the structural, magnetic, and photocatalytic behavior of Pr0.9-xSrxPd0.1Mn0.9O3 manganite for enhanced methylene blue degradation
  5. Harnessing spinel–metal synergy in MnFe2O4–Co core shell catalysts for sustainable seawater oxidation
  6. The impact of combining Pr0.63Dy0.07Sr0.3/La0.8Dy0.2MnO3 manganites at a ratio of 50:50 and 75:25 on the improvement of magnetic refrigeration technique
  7. Surface engineering of nickel foam for cost-effective and highly corrosion-resistant electrodes for water and seawater electrolysis
  8. Microenvironment‐Engineered Multilayered Electrode Design for Sustainable Seawater Oxidation
  9. Tunable Magnetic Heating in La0.51Sr0.49MnO3 and La0.51Dy0.045Sr0.445MnO3 Nanoparticles: Frequency- and Amplitude-Dependent Behavior
  10. Dy-Doped La0.51Sr0.49MnO₃ nanoparticles: Tuning structural and magnetocaloric properties via Sol-Gel synthesis for energy-efficient applications
  11. A facile approach for fabricating efficient and stable perovskite solar cells
  12. Enhancing magnetocaloric performance through phase separation in La0.45Ca0.45Y0.05X0.05MnO3 perovskite manganites
  13. Electronic and surface engineering of Mn active sites by femtosecond lasers: enhancing catalytic performance for seawater electrolysis through Mn4+–OH− layers
  14. Emphasis on the transition metal sulfides and their polymer composites as potential electrodes for supercapacitor applications
  15. Marigold flower-like structured battery-type Cu2O/Co(OH)2 composite electrode material for high-performance supercapacitors
  16. Recent advances in pseudocapacitive electrode materials for high energy density aqueous supercapacitors: Combining transition metal oxides with carbon nanomaterials
  17. Charge carrier motion and Mn-spin coupling defining the transport behaviors and the magnetic order at DySrCaMnO3 polycrystalline ceramic
  18. Hydrophilic Surface Wettability Characteristics for Poly(vinyl alcohol) Films Doped with Glycerol Plasticizer
  19. Mass spectrometry-based proteomic profiling of extracellular vesicle proteins in diabetic and non-diabetic ischemic stroke patients: a case-control study
  20. Advances in the targeted theragnostics of osteomyelitis caused by Staphylococcus aureus
  21. Advances in the Targeted Theragnostics of Osteomyelitis Caused by Staphylococcus aureus
  22. Fabricating Planar Perovskite Solar Cells through a Greener Approach
  23. Desirable candidates for high-performance lead-free organic–inorganic halide perovskite solar cells
  24. Tuning the performance of PSCs using rare-earth elements
  25. Stabilizing oxygen-deficient Mn sites active in seawater oxidation
  26. Analyzing Meteorites at the Sharjah Academy for Astronomy, Space Sciences, and Technology
  27. Electrochemical Water Splitting
  28. Mass Spectrometry-Based Proteomic Profiling of Extracellular Vesicle Proteins in Diabetic and Nondiabetic Ischemic Stroke Patients: A Case-Control Study
  29. Optoelectronic Properties of Highly Porous Silver Oxide Thin Film
  30. SOx Functionalized NiOOH Nanosheets Embedded in Ni(OH)2 Microarray for High‐Efficiency Seawater Oxidation
  31. Comparative analysis of the structural, magnetic, and magnetocaloric properties of Gd0.5Dy0.5Mn0.5X0.5O3 (X = Ni, Fe, and Co) nanoparticles
  32. A roadmap towards sustainable anode design for alkaline water electrolysis
  33. Nanotargeted Delivery of Immune Therapeutics in Type 1 Diabetes
  34. Williamson-Hall technique for magnetic cooling in nanosized manganite LaNi0.25Mn0.75O3 and ferrite LaNi0.25Fe0.75O3
  35. La0.6X0.1Te0.3MnO3 system with significant refrigerant capacity at low magnetic field and double magnetic entropy change peaks: effect of ball-milling time on physical and critical behaviors
  36. Enhancement of the Mechanical and Thermal Properties of Polypropylene and Nylon 6.6 Composite Blends
  37. Nanosized La0.4Gd0.2Sr0.4MnO3 manganites: From magnetic refrigeration to hyperthermia method
  38. Au/TiO2 Thin Film with Ultra-Low Content of Gold: An Efficient Self-Supported Bifunctional Electrocatalyst for Oxygen and Hydrogen Evolution Reaction
  39. Chapter 4C Recent progress in cobalt-based nanosheets for electrochemical water oxidation
  40. S doped Cu2O-CuO nanoneedles array: Free standing oxygen evolution electrode with high efficiency and corrosion resistance for seawater splitting
  41. Strategies of Anode Design for Seawater Electrolysis
  42. Expression of CD91 in extracellular vesicles: A potential biomarker for the diagnosis of non-small cell lung cancer
  43. NiOx–FeOx Nanoclusters Anchored on g-C3N4 Sheets for Selective Seawater Oxidation with High Corrosion Resistance
  44. Biogenesis of Exosomes Laden with Metallic Silver–Copper Nanoparticles Liaised by Wheat Germ Agglutinin for Targeted Delivery of Therapeutics to Breast Cancer
  45. Electronic and Structural Modification of Mn3O4 Nanosheets for Selective and Sustained Seawater Oxidation
  46. Multifunctional porous NiCo bimetallic foams toward water splitting and methanol oxidation-assisted hydrogen production
  47. Au nanocluster coupling with Gd-Co2B nanoflakes embedded in reduced TiO2 nanosheets: Seawater electrolysis at low cell voltage with high selectivity and corrosion resistance
  48. Fabrication of Ag2O/WO3 based sensors for detection of hydrogen sulfide
  49. Investigation of the Physical Properties of Pr0.63dy0.07sr0.3mno3, La0.8dy0.2mno3, and Their Composites (0.5/0.5 and 0.75/0.25) for the Magnetic Refrigeration Application
  50. The Effect of Ball-Milling Time on the Physical and Critical Behaviors of a La0.6◻0.1te0.3mno3 System with Double Magnetic Entropy Change Peaks and Significant Refrigerant Capacity at Low Magnetic Field
  51. 3D SERS-based biosensor for the selective detection of circulating cancer-derived exosomes
  52. Effect of doping concentration and heat treatment on the refrigerant capacity of Pr0.63Dy0.37-xSrxMnO3
  53. A comparative study of the physical properties of Pr0.63La0.37−xSrxMnO3 (xSr = 0.00–0.30) characterized by “λ” shape dc magnetizations
  54. Circulating Exosomes of Neuronal Origin as Potential Early Biomarkers for Development of Stroke
  55. Optoelectronic properties of highly porous silver oxide thin film
  56. Gd-Doped Ni-Oxychloride Nanoclusters: New Nanoscale Electrocatalysts for High-Performance Water Oxidation through Surface and Structural Modification
  57. Regulatory T cells engineered with TCR signaling–responsive IL-2 nanogels suppress alloimmunity in sites of antigen encounter
  58. Oxidation of Au/Ag films by oxygen plasma: phase separation and generation of nanoporosity
  59. Effects of the sintering temperature on the La0.63Gd0.37MnO3 structure and magnetic properties
  60. Microwave Absorbing properties of metal functionalized-CNT-polymer composite for stealth applications
  61. Enhancement of the Magnetotransport Behavior in a Phase-Separated LaAgCaMnO3 Polycrystalline: Unraveling the Role of a Multi-Double-Exchange Mechanism
  62. Advances of exosome isolation techniques in lung cancer
  63. Surface Assembling of Highly Interconnected and Vertically Aligned Porous Nanosheets of Gd−CoB on TiO 2 Nanoflowers for Durable Methanol oxidation Reaction
  64. Mechanical and thermal characterization of polypropylene-reinforced nanocrystalline cellulose nanocomposites
  65. Boron doped silver-copper alloy nanoparticle targeting intracellular S. aureus in bone cells
  66. Griffiths phase, magnetic memory and ac susceptibility of an antiferromagnetic titanate-based perovskite Er0.9Sr0.1Ti0.975Cr0.025O3 system
  67. Novel Nanoparticles for the Selective Delivery of Targeted Immunotherapy System
  68. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  69. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  70. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  71. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  72. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  73. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  74. Synthesis and targeting of ubiquicidin linked Ag-Cu nanoparticles to S. aureus in osteoblast infection
  75. Unconventional critical behavior of the magnetic refrigerant system Er0.98□0.02Co2 around its ferromagnetic-paramagnetic transition
  76. CTLA4-Ig (abatacept): a promising investigational drug for use in type 1 diabetes
  77. Gold‐Supported Gadolinium Doped CoB Amorphous Sheet: A New Benchmark Electrocatalyst for Water Oxidation with High Turnover Frequency
  78. Mechanical and thermal characterization of grafted PP-NCC nanocomposites
  79. Mechanical and thermal characterization of functionalized maleic anhydride grafted polypropylene
  80. AgCuB nanoparticle eradicates intracellular S. aureus infection in bone cells: in vitro
  81. Thermal analysis of erbium charge storage nanoparticles embedded in organic MIS structure
  82. Selective gas sensors using graphene and CuO nanorods
  83. Targeting antigen-presenting cells by anti–PD-1 nanoparticles augments antitumor immunity
  84. Targeted delivery of immune therapeutics to lymph nodes prolongs cardiac allograft survival
  85. Glucose-Mediated Insulin Release Carrier
  86. Doped conductive polymers and single-walled carbon nanotubes as charge storage devices
  87. Sodium Methoxide Catalyzed Depolymerization of Waste Polyethylene Terephthalate Under Microwave Irradiation
  88. Scientists Are Using Metallic Nanoparticles To Eliminate Bacterial Bone Infections
  89. Metallic nanoparticles to eradicate bacterial bone infection
  90. Synthesis and analysis of iron-dopped CNT/PU composites for microwave applications
  91. Kirkendall Effect vs Corrosion of Silver Nanocrystals by Atomic Oxygen: From Solid Metal Silver to Nanoporous Silver Oxide
  92. Reactive Extrusion of Polyethylene Terephthalate Waste and Investigation of Its Thermal and Mechanical Properties after Treatment
  93. Characterization of CdS and AgPt nanofillers used in organic capacitors
  94. Selective H2S sensor based on CuO nanoparticles embedded in organic membranes
  95. ChemInform Abstract: Magnetic Properties of Magnetic Nanoparticles for Efficient Hyperthermia
  96. Storage of energy harvested from a miniature turbine in a novel organic capacitor
  97. Acute systemic exposure to silver-based nanoparticles induces hepatotoxicity and NLRP3-dependent inflammation
  98. PbS/CdS heterojunction quantum dot solar cells
  99. Investigating Negative Magnetization and Blocking Temperature in Aggregates of Ferrite Nanoparticles
  100. Temperature Dependence of Saturation Magnetization and Coercivity in Mn0.5Zn0.5Gd0.02Fe1.98O4Ferrite Nanoparticles
  101. Growth of microalgae using CO2 enriched air for biodiesel production in supercritical CO2
  102. Enhancing the performance of Mg–Al brine water batteries using conductive polymer-PEDOT:PSS
  103. High and Low Speed Impact Characteristics of Nanocomposites
  104. Magnetic Properties of Magnetic Nanoparticles for Efficient Hyperthermia
  105. Microwave assisted glycolysis of poly(ethylene terephthalate) catalyzed by 1-butyl-3-methylimidazolium bromide ionic liquid
  106. Mass transfer modeling of Scenedesmus sp. lipids extracted by supercritical CO 2
  107. Enzymatic biodiesel production of microalgae lipids under supercritical carbon dioxide: Process optimization and integration
  108. Novel hydrogen gas sensor based on Pd and SnO2 nanoclusters
  109. Pipeline Parameter Identification and Leak Localization Using Experimental Data
  110. Synthesis and optical properties of colloidal CuO nanoparticles
  111. Effective extraction of microalgae lipids from wet biomass for biodiesel production
  112. Novel organic memory devices using Au–Pt–Ag nanoparticles as charge storage elements
  113. COMPATIBILITY OF TEACHING STYLES WITH LEARNING STYLES: A CASE STUDY
  114. Supercritical carbon dioxide extraction of microalgae lipid: Process optimization and laboratory scale-up
  115. Influence of reactant concentration on optical properties of ZnO nanoparticles
  116. Nano-floating gate organic memory devices utilizing Ag–Cu nanoparticles embedded in PVA-PAA-glycerol polymer
  117. Magnetic Nanoparticles: Surface Effects and Properties Related to Biomedicine Applications
  118. Heat transfer characteristics of multi-walled carbon nanotubes suspension in a developing channel flow
  119. Physical properties of PVA doped with algal glycerol
  120. Role of nanofillers in low speed impact enhancement of composites
  121. NMR relaxation in systems with magnetic nanoparticles: A temperature study
  122. Thermally Reversible Nanoparticle Aggregation Explains Magnetic Moment Increase with Temperature
  123. Experimental investigation of the low speed impact characteristics of nanocomposites
  124. Combustion of waste chocolate oil biofuel in a diesel engine
  125. MnZnFe nanoparticles for self-controlled magnetic hyperthermia
  126. Electrical properties of sorbitol-doped poly(vinyl alcohol)-poly(acrylamide-co-acrylic acid) polymer membranes
  127. Self-Controlled Hyperthermia Characteristics of ZnGdFe Nanoparticles
  128. Pathogen detection using single tunnel junction sensor (STJ) with magnetic nano particles
  129. Bowing Character in Wurtzite ZnO-Based Ternary Alloys
  130. Nanoparticles rapidly assess specific IgE in plasma
  131. Investigations on electrical properties of poly(vinyl alcohol) doped with 1-methyl-3-n-decyl-imidazolium bromide ionic liquid
  132. Transverse strength enhancement of carbon fiber reinforced polymer composites by means of magnetically aligned carbon nanotubes
  133. CFD simulation for biomagnetic separation involving dilute suspensions
  134. Leak Localization in Pipelines via Computational Pipeline Monitoring
  135. CFD simulation of the magnetophoretic separation in a microchannel
  136. Alteration of the mechanical and thermal properties of nylon 6/nylon 6,6 blends by nanoclay
  137. Numerical simulation of the continuous biomagnetic separation in a two-dimensional channel
  138. PEG coating reduces NMR relaxivity of Mn0.5Zn0.5Gd0.02Fe1.98O4 hyperthermia nanoparticles
  139. A Review of Enzymatic Transesterification of Microalgal Oil-Based Biodiesel Using Supercritical Technology
  140. Thermal and mechanical properties of poly(vinyl alcohol) plasticized with glycerol
  141. The Role of Aggregation of Ferrite Nanoparticles on Their Magnetic Properties
  142. Combustion of algae oil methyl ester in an indirect injection diesel engine
  143. Thermomechanical properties of poly(vinyl alcohol) plasticized with varying ratios of sorbitol
  144. On Identification of Leaky Pipeline Parameters via Monte Carlo Simulation
  145. Measurement and Modeling of Confined Jet Discharged Tangentially on a Concave Semicylindrical Hot Surface
  146. Flow characteristics of gallium in a meso-scale channel under the influence of magnetic fields
  147. Phase change material for efficient removal of crystal violet dye
  148. Nanocidals for Osteomyelitis Management
  149. Leak Localization in Pipelines via Computational Pipeline Monitoring
  150. Combustion of Raw Algae Oil and Its Methyl Ester in a Diesel Engine
  151. Removal and recovery of acridine orange from solutions by use of magnetic nanoparticles
  152. FABRICATION OF ARRAY MICROSTRUCTURES USING SERIAL AND PARALLEL LOCALIZED ELECTRODEPOSITION
  153. ALIGNMENT OF CARBON NANOTUBES USING MAGNETIC NANOPARTICLES
  154. Predicting a major role of surface spins in the magnetic properties of ferrite nanoparticles
  155. Ni1-xCrxalloy for self controlled magnetic hyperthermia
  156. Ionic Liquid Mediated Dye Recovery from Aqueous Solution
  157. Mixing Efficiency of Red Blood Cells With Magnetic Microspheres for a Hybrid Separation System
  158. Superparamagnetic iron oxide--myoglobin as potential nanoparticle: iron oxide--myoglobin binding properties and magnetic resonance imaging marker in mouse imaging
  159. Flow field analysis in a spiral viscous micropump
  160. Effect of Nano-Circular Inclusion on the Interfacial Stresses of a Nano-Composite
  161. Numerical simulation of biomagnetic fluid downstream an eccentric stenotic orifice
  162. Development of Nano-Microtechnology and Biomedical Applications
  163. Analysis of Heat Generation Through-Electromagnetic Energy Conversion for Magnetic Hyperthermia Cancer Treatment
  164. Controlling Residual Stress in Metal Matrix Ceramic Fiber Composite
  165. Synthesis and Stabilization of Fe–Nd–B Nanoparticles for Biomedical Applications
  166. Properties of NdFeB film grown on silicon substrate by PLD under external magnetic field
  167. Synthesis and characterization of polymer encapsulated Cu–Ni magnetic nanoparticles for hyperthermia applications
  168. Numerical simulation of flow in a screw-type blood pump
  169. pH-reversible magnetic gel with a biodegradable polymer
  170. Biodegradable magnetic gel: synthesis and characterization
  171. Size dependent magnetic properties of iron oxide nanoparticles
  172. Design and Analysis of a Surface Micromachined Spiral-Channel Viscous Pump
  173. Some Historical and Future Aspects of Engineering Mechanics
  174. Synthesis of Polyethylene Magnetic Nanoparticles
  175. Polyethylene magnetic nanoparticle: a new magnetic material for biomedical applications
  176. Force and torque characteristics for magnetically driven blood pump
  177. Fabrication of NdFeB Thin Film and Its Application in MEMS
  178. A Surface Micromachined Spiral-Channel Viscous Pump
  179. Synthesis and characterization of heat-stabilized albumin magnetic microspheres
  180. Apparent viscosity of human blood in a high static magnetic field
  181. Modification and characterization of polystyrene-based magnetic microspheres and comparison with albumin-based magnetic microspheres
  182. System identification for a lumped heat exchanger using the extended information filter
  183. Development of magnetic device for cell separation
  184. Microscopic flow visualization system for fluids in magnetic field
  185. High magnetic field effects on human deoxygenated hemoglobin light absorption
  186. Development of nanotechnology for biomedical applications
  187. Famu Fsu Msme Online Program