Contact

All Stories

  1. Tuning the electrical, thermal, and mechanical properties of porous SiC ceramics using metal carbides

    Article • Journal of the European Ceramic Society, December 2023, Elsevier

    Professor Young-Wook Kim

  2. Effect of pore size on the flexural strength of porous silicon carbide ceramics

    Article • Open Ceramics, December 2023, Elsevier

    Professor Young-Wook Kim

  3. Effects of pore size on electrical and thermal properties of porous SiC ceramics

    Article • International Journal of Applied Ceramic Technology, November 2023, Wiley

    Professor Young-Wook Kim

  4. Effects of boron source on properties of pressureless solid-state sintered silicon carbide ceramics

    Article • Journal of the European Ceramic Society, October 2023, Elsevier

    Professor Young-Wook Kim

  5. Thermal conductivity of liquid-phase sintered silicon carbide ceramics: A review

    Article • Journal of the European Ceramic Society, August 2023, Elsevier

    Professor Young-Wook Kim

  6. High temperature corrosion resistance of electrically conductive nitrogen doped silicon carbide ceramics in molten fluorides

    Article • Journal of the European Ceramic Society, March 2023, Elsevier

    Professor Young-Wook Kim

  7. Pressureless sintering of SiC ceramics with improved specific stiffness

    Article • Journal of the European Ceramic Society, March 2023, Elsevier

    Professor Young-Wook Kim

  8. Preface to the Special Issue

    Article • International Journal of Applied Ceramic Technology, December 2022, Wiley

    Professor Young-Wook Kim

  9. Effects of starting powder on microstructure and thermal conductivity of pressureless-sintered fully ceramic microencapsulated fuels

    Article • Journal of the European Ceramic Society, November 2022, Elsevier

    Professor Young-Wook Kim

  10. Electrical, thermal, and mechanical properties of porous silicon carbide ceramics with a boron carbide additive

    Article • International Journal of Applied Ceramic Technology, June 2022, Wiley

    Professor Young-Wook Kim

  11. Effect of nitride addition on the electrical and thermal properties of pressureless solid-state sintered SiC ceramics

    Article • Journal of the Korean Ceramic Society, February 2022, Springer Science + Business Media

    Professor Young-Wook Kim

  12. Controlling the electrical resistivity of porous silicon carbide ceramics and their applications: A review

    Article • International Journal of Applied Ceramic Technology, February 2022, Wiley

    Professor Young-Wook Kim

  13. Preface to the Festschrift

    Article • International Journal of Applied Ceramic Technology, January 2022, Wiley

    Professor Young-Wook Kim

  14. New quaternary additive for processing fully ceramic microencapsulated fuels without applied pressure

    Article • Journal of the European Ceramic Society, December 2021, Elsevier

    Professor Young-Wook Kim

  15. Effects of SiC whisker addition on mechanical, thermal, and permeability properties of porous silica‐bonded SiC ceramics

    Article • International Journal of Applied Ceramic Technology, November 2021, Wiley

    Professor Young-Wook Kim

  16. Processing and properties of water-absorbing zeolite-based porous ceramics

    Article • Journal of the Korean Ceramic Society, November 2021, Springer Science + Business Media

    Professor Young-Wook Kim

  17. Influence of sintering atmosphere and BN additives on microstructure and properties of porous SiC ceramics

    Article • Journal of the European Ceramic Society, November 2021, Elsevier

    Professor Young-Wook Kim

  18. MicroStructural Hierarchy Descriptor (μSHD)–property correlations of silicon carbide ceramics

    Article • Journal of the European Ceramic Society, November 2021, Elsevier

    Professor Young-Wook Kim

  19. Pressureless joining of SiC ceramics with magnesia‐alumina‐silica glass ceramics

    Article • International Journal of Applied Ceramic Technology, October 2021, Wiley

    Professor Young-Wook Kim

  20. Effects of initial α‐phase content on properties of pressureless solid‐state sintered SiC ceramics

    Article • International Journal of Applied Ceramic Technology, September 2021, Wiley

    Professor Young-Wook Kim

  21. Effects of initial α-phase content on the electrical, thermal, and mechanical properties of pressureless solid-state sintered SiC ceramics

    Article • August 2021, Research Square

    Professor Young-Wook Kim

  22. Effect of AlN addition on the electrical resistivity of pressureless sintered SiC ceramics with B 4 C and C

    Article • Journal of the American Ceramic Society, July 2021, Wiley

    Professor Young-Wook Kim

  23. Pressureless solid-state sintering of SiC ceramics with BN and C additives

    Article • Journal of Asian Ceramic Societies, July 2021, Taylor & Francis

    Professor Young-Wook Kim

  24. High‐temperature strength of liquid‐phase‐sintered silicon carbide ceramics: A review

    Article • International Journal of Applied Ceramic Technology, June 2021, Wiley

    Professor Young-Wook Kim

  25. Electrical resistivity at the micron scale in a polycrystalline SiC ceramic

    Article • Ceramics International, June 2021, Elsevier

    Professor Young-Wook Kim

  26. Multiple thermal resistance induced extremely low thermal conductivity in porous SiC-SiO2 ceramics with hierarchical porosity

    Article • Journal of the European Ceramic Society, February 2021, Elsevier

    Professor Young-Wook Kim

  27. Plastic deformation-induced improved mechanical and thermal properties in hot-forged SiC-TiC composite

    Article • Journal of the European Ceramic Society, January 2021, Elsevier

    Professor Young-Wook Kim

  28. Pressureless sintering of fully ceramic microencapsulated fuels

    Article • Journal of the European Ceramic Society, December 2020, Elsevier

    Professor Young-Wook Kim

  29. Editor’s Letter

    Article • International Journal of Applied Ceramic Technology, November 2020, Wiley

    Professor Young-Wook Kim

  30. Intrinsic microstructures of silica‐bonded porous nano‐SiC ceramics

    Article • Journal of the American Ceramic Society, November 2020, Wiley

    Professor Young-Wook Kim

  31. Electrical, thermal, and mechanical properties of porous SiC-nitride composites

    Article • Journal of the European Ceramic Society, September 2020, Elsevier

    Professor Young-Wook Kim

  32. Processing and properties of silica-bonded porous nano-SiC ceramics with extremely low thermal conductivity

    Article • Journal of the European Ceramic Society, July 2020, Elsevier

    Professor Young-Wook Kim

  33. Effect of additive content on the mechanical and thermal properties of pressureless liquid-phase sintered SiC

    Article • Journal of Asian Ceramic Societies, April 2020, Taylor & Francis

    Professor Young-Wook Kim

  34. Effects of porosity on electrical and thermal conductivities of porous SiC ceramics

    Article • Journal of the European Ceramic Society, April 2020, Elsevier

    Professor Young-Wook Kim

  35. Tuning the electrical, thermal, and mechanical properties of SiC-BN composites using sintering additives

    Article • Journal of Asian Ceramic Societies, March 2020, Taylor & Francis

    Professor Young-Wook Kim

  36. High interfacial thermal resistance induced low thermal conductivity in porous SiC-SiO2 composites with hierarchical porosity

    Article • Journal of the European Ceramic Society, March 2020, Elsevier

    Professor Young-Wook Kim

  37. Highly electrically and thermally conductive silicon carbide-graphene composites with yttria and scandia additives

    Article • Journal of the European Ceramic Society, February 2020, Elsevier

    Professor Young-Wook Kim

  38. Thermal and electrical properties of additive-free rapidly hot-pressed SiC ceramics

    Article • Journal of the European Ceramic Society, February 2020, Elsevier

    Professor Young-Wook Kim

  39. Direct bonding of silicon carbide ceramics sintered with yttria

    Article • Journal of the European Ceramic Society, December 2019, Elsevier

    Professor Young-Wook Kim

  40. Open-celled silicon carbide foams with high porosity from boron-modified polycarbosilanes

    Article • Journal of the European Ceramic Society, December 2019, Elsevier

    Professor Young-Wook Kim

  41. Pressureless sintered silicon carbide matrix with a new quaternary additive for fully ceramic microencapsulated fuels

    Article • Journal of the European Ceramic Society, November 2019, Elsevier

    Professor Young-Wook Kim

  42. Effects of polysiloxane on thermal conductivity and compressive strength of porous silica ceramics

    Article • Ceramics International, July 2019, Elsevier

    Professor Young-Wook Kim

  43. Electrical properties of liquid-phase sintered silicon carbide ceramics: a review

    Article • Critical Reviews in Solid State and Material Sciences, April 2019, Taylor & Francis

    Professor Young-Wook Kim

  44. Low temperature pressureless sintering of silicon carbide ceramics with alumina–yttria–magnesia-calcia

    Article • Journal of the Ceramic Society of Japan, April 2019, Ceramic Society of Japan

    Professor Young-Wook Kim

  45. High-temperature flexural strength of silicon carbide- zirconium carbonitride composites

    Article • International Journal of Applied Ceramic Technology, March 2019, Wiley

    Professor Young-Wook Kim, Rohit Malik

  46. Joining of silicon carbide ceramics using a silicon carbide tape

    Article • International Journal of Applied Ceramic Technology, February 2019, Wiley

    Professor Young-Wook Kim

  47. Processing of silicon-derived silica-bonded silicon carbide membrane supports

    Article • Ceramics International, February 2019, Elsevier

    Professor Young-Wook Kim

  48. Mechanical and thermal properties of silicon carbide ceramics with yttria–scandia–magnesia

    Article • Journal of the European Ceramic Society, February 2019, Elsevier

    Professor Young-Wook Kim

  49. Electrically conductive SiC ceramics processed by pressureless sintering

    Article • International Journal of Applied Ceramic Technology, October 2018, Wiley

    Professor Young-Wook Kim

  50. Grain-growth-induced high electrical conductivity in SiC–BN composites

    Article • Ceramics International, October 2018, Elsevier

    Professor Young-Wook Kim

  51. Electrical and mechanical properties of pressureless sintered SiC-Ti 2 CN composites

    Article • Journal of the European Ceramic Society, August 2018, Elsevier

    Professor Young-Wook Kim

  52. Tribology of WC reinforced SiC ceramics: Influence of counterbody

    Article • Friction, March 2018, Tsinghua University Press

    Professor Young-Wook Kim

  53. Improved electrical and thermal conductivities of polysiloxane-derived silicon oxycarbide ceramics by barium addition

    Article • Journal of the European Ceramic Society, February 2018, Elsevier

    Professor Young-Wook Kim

  54. Process-tolerant pressureless-sintered silicon carbide ceramics with alumina-yttria-calcia-strontia

    Article • Journal of the European Ceramic Society, February 2018, Elsevier

    Professor Young-Wook Kim

  55. Microstructure and high-temperature strength of silicon carbide with 2000 ppm yttria

    Article • Journal of the European Ceramic Society, December 2017, Elsevier

    Professor Young-Wook Kim

  56. Room and high temperature reciprocated sliding wear behavior of SiC-WC composites

    Article • Ceramics International, December 2017, Elsevier

    Professor Young-Wook Kim

  57. Effect of impingement angle and WC content on high temperature erosion behavior of SiC-WC composites

    Article • International Journal of Refractory Metals and Hard Materials, November 2017, Elsevier

    Professor Young-Wook Kim

  58. Formation of ZIF-8 membranes inside porous supports for improving both their H2/CO2 separation performance and thermal/mechanical stability

    Article • Journal of Membrane Science, October 2017, Elsevier

    Professor Young-Wook Kim

  59. Effect of grain growth on the thermal conductivity of liquid-phase sintered silicon carbide ceramics

    Article • Journal of the European Ceramic Society, September 2017, Elsevier

    Professor Young-Wook Kim

  60. Processing of alumina-coated glass-bonded silicon carbide membranes for oily wastewater treatment

    Article • International Journal of Applied Ceramic Technology, May 2017, Wiley

    Professor Young-Wook Kim

  61. Processing and properties of glass-bonded silicon carbide membrane supports

    Article • Journal of the European Ceramic Society, April 2017, Elsevier

    Professor Young-Wook Kim

  62. Highly resistive SiC ceramics sintered with Al2O3-AlN-Y2O3 additions

    Article • Ceramics International, April 2017, Elsevier

    Professor Young-Wook Kim

  63. High thermal conductivity of spark plasma sintered silicon carbide ceramics with yttria and scandia

    Article • Journal of the American Ceramic Society, February 2017, Wiley

    Professor Young-Wook Kim

  64. Electrical and thermal properties of SiC-Zr2CN composites sintered with Y2O3-Sc2O3 additives

    Article • Journal of the European Ceramic Society, February 2017, Elsevier

    Professor Young-Wook Kim

  65. Electrically conductive SiC-BN composites

    Article • Journal of the European Ceramic Society, December 2016, Elsevier

    Professor Young-Wook Kim

  66. Tribological Behavior of Silicon Carbide Ceramics - A Review

    Article • Journal of the Korean Ceramic Society, November 2016, Korean Ceramic Society

    Professor Young-Wook Kim

  67. Conductive SiC ceramics fabricated by spark plasma sintering

    Article • Ceramics International, November 2016, Elsevier

    Professor Young-Wook Kim

  68. High-temperature strength of a thermally conductive silicon carbide ceramic sintered with yttria and scandia

    Article • Journal of the European Ceramic Society, November 2016, Elsevier

    Professor Young-Wook Kim

  69. Thermal, electrical, and mechanical properties of pressureless sintered silicon carbide ceramics with yttria-scandia-aluminum nitride

    Article • Journal of the European Ceramic Society, September 2016, Elsevier

    Professor Young-Wook Kim

  70. Effects of carbon addition on the electrical properties of bulk silicon-oxycarbide ceramics

    Article • Journal of the European Ceramic Society, September 2016, Elsevier

    Professor Young-Wook Kim

  71. Effects of Y2O3–RE2O3 (RE=Sm, Gd, Lu) additives on electrical and mechanical properties of SiC ceramics containing Ti2CN

    Article • Journal of the European Ceramic Society, September 2016, Elsevier

    Professor Young-Wook Kim

  72. Processing of alumina-coated clay–diatomite composite membranes for oily wastewater treatment

    Article • Ceramics International, March 2016, Elsevier

    Professor Young-Wook Kim

  73. Mechanical and Thermal Properties of Pressureless Sintered Silicon Carbide Ceramics with Alumina-Yttria-Calcia

    Article • Journal of the American Ceramic Society, February 2016, Wiley

    Professor Young-Wook Kim

  74. Low-temperature spark plasma sintering of alumina by using SiC molding set

    Article • Journal of the Ceramic Society of Japan, January 2016, Ceramic Society of Japan

    Professor Young-Wook Kim

  75. Effect of grain growth on electrical properties of silicon carbide ceramics sintered with gadolinia and yttria

    Article • Journal of the European Ceramic Society, December 2015, Elsevier

    Professor Young-Wook Kim

  76. Electrical and thermal properties of silicon carbide–boron nitride composites prepared without sintering additives

    Article • Journal of the European Ceramic Society, December 2015, Elsevier

    Professor Young-Wook Kim

  77. Tribological characteristics of SiC ceramics sintered with a small amount of yttria

    Article • Ceramics International, December 2015, Elsevier

    Professor Young-Wook Kim

  78. Effect of Strontium Carbonate Content on Flexural Strength of Clay-Based Membrane Supports

    Article • Journal of the Korean Ceramic Society, November 2015, Korean Ceramic Society

    Professor Young-Wook Kim

  79. Highly Conductive p -Type Zinc blende SiC Thin Films Fabricated on Silicon Substrates by Magnetron Sputtering

    Article • Journal of the American Ceramic Society, October 2015, Wiley

    Professor Young-Wook Kim

  80. Effects of Y2O3-RE2O3(RE = Sm, Gd, Lu) Additives on Electrical and Thermal Properties of Silicon Carbide Ceramics

    Article • Journal of the American Ceramic Society, October 2015, Wiley

    Professor Young-Wook Kim

  81. Electrical and thermal properties of SiC–AlN ceramics without sintering additives

    Article • Journal of the European Ceramic Society, September 2015, Elsevier

    Professor Young-Wook Kim

  82. Ceramic Membranes Prepared from a Silicate and Clay-mineral Mixture for Treatment of Oily Wastewater

    Article • Clays and Clay Minerals, June 2015, Springer Science + Business Media

    Professor Young-Wook Kim

  83. Effect of Alkaline-Earth Oxide Additives on Flexural Strength of Clay-Based Membrane Supports

    Article • Journal of the Korean Ceramic Society, May 2015, Korean Ceramic Society

    Professor Young-Wook Kim

  84. Electrical conductivity of dense, bulk silicon-oxycarbide ceramics

    Article • Journal of the European Ceramic Society, May 2015, Elsevier

    Professor Young-Wook Kim

  85. Effect of additive composition on mechanical properties of pressureless sintered silicon carbide ceramics sintered with alumina, aluminum nitride and yttria

    Article • Metals and Materials International, May 2015, Springer Science + Business Media

    Professor Young-Wook Kim

  86. Micro-electrical discharge machining characteristics of newly developed conductive SiC ceramic

    Article • Ceramics International, April 2015, Elsevier

    Professor Young-Wook Kim

  87. Effect of WC addition on sliding wear behavior of SiC ceramics

    Article • Ceramics International, April 2015, Elsevier

    Professor Young-Wook Kim

  88. Flexural Strength of Polysiloxane-Derived Strontium-Doped SiOC Ceramics

    Article • Journal of the Korean Ceramic Society, January 2015, Korean Ceramic Society

    Professor Young-Wook Kim

  89. Electrical, thermal and mechanical properties of silicon carbide–silicon nitride composites sintered with yttria and scandia

    Article • Journal of the European Ceramic Society, January 2015, Elsevier

    Professor Young-Wook Kim

  90. Effect of starting particle size and barium addition on flexural strength of polysiloxane-derived SiOC ceramics

    Article • Journal of the Ceramic Society of Japan, January 2015, Ceramic Society of Japan

    Professor Young-Wook Kim

  91. Thermal and Mechanical Properties of SiC-TiC0.5N0.5Composites

    Article • Journal of the American Ceramic Society, November 2014, Wiley

    Professor Young-Wook Kim

  92. Effect of Clay-Mineral Composition on Flexural Strength of Clay-based Membranes

    Article • Journal of the Korean Ceramic Society, September 2014, Korean Ceramic Society

    Professor Young-Wook Kim

  93. Mechanical properties of electrically conductive silicon carbide ceramics

    Article • Ceramics International, August 2014, Elsevier

    Professor Young-Wook Kim

  94. Electrical resistivity of α-SiC ceramics sintered with Al2O3 or AlN additives

    Article • Journal of the European Ceramic Society, July 2014, Elsevier

    Professor Young-Wook Kim

  95. Electrical properties of SiC ceramics sintered with 0.5wt% AlN–RE2O3 (RE=Y, Nd, Lu)

    Article • Ceramics International, July 2014, Elsevier

    Professor Young-Wook Kim

  96. Fabrication of lightweight, flexible polyetherimide/nickel composite foam with electromagnetic interference shielding effectiveness reaching 103 dB

    Article • Journal of Cellular Plastics, June 2014, SAGE Publications

    Professor Young-Wook Kim

  97. Electrical and Thermal Properties of SiC Ceramics Sintered with Yttria and Nitrides

    Article • Journal of the American Ceramic Society, June 2014, Wiley

    Professor Young-Wook Kim

  98. Effect of Initial Alpha-SiC Content on Thermal Conductivity of Silicon Carbide Ceramics

    Article • Key Engineering Materials, June 2014, Trans Tech Publications

    Professor Young-Wook Kim

  99. Erosion behavior of SiC–WC composites

    Article • Ceramics International, June 2014, Elsevier

    Professor Young-Wook Kim

  100. Highly conductive SiC ceramics containing Ti2CN

    Article • Journal of the European Ceramic Society, May 2014, Elsevier

    Professor Young-Wook Kim

  101. Electrically and thermally conductive SiC ceramics

    Article • Journal of the Ceramic Society of Japan, January 2014, Ceramic Society of Japan

    Professor Young-Wook Kim

  102. Low-cost clay-based membranes for oily wastewater treatment

    Article • Journal of the Ceramic Society of Japan, January 2014, Ceramic Society of Japan

    Professor Young-Wook Kim

  103. Microstructure and Thermal Conductivity of Silicon Carbide with Yttria and Scandia

    Article • Journal of the American Ceramic Society, December 2013, Wiley

    Professor Young-Wook Kim

  104. Effect of Additive Composition on Flexural Strength of Cullet-Loess Tile Bodies

    Article • Journal of the Korean Ceramic Society, November 2013, Korean Ceramic Society

    Professor Young-Wook Kim

  105. Processing of Kaolin-Based Microfiltration Membranes

    Article • Journal of the Korean Ceramic Society, September 2013, Korean Ceramic Society

    Professor Young-Wook Kim

  106. Processing and properties of macroporous silicon carbide ceramics: A review

    Article • Journal of Asian Ceramic Societies, September 2013, Taylor & Francis

    Professor Young-Wook Kim

  107. Control of Electrical Resistivity in Silicon Carbide Ceramics Sintered with Aluminum Nitride and Yttria

    Article • Journal of the American Ceramic Society, August 2013, Wiley

    Professor Young-Wook Kim

  108. Porous sodium borate-bonded SiC ceramics

    Article • Ceramics International, August 2013, Elsevier

    Professor Young-Wook Kim

  109. 초고압을 이용한 나노급 마그네시아 분말의 저온 소결 연구

    Article • Journal of the Korean Ceramic Society, May 2013, Korean Ceramic Society

    Professor Young-Wook Kim

  110. Temperature Dependence of Electrical Resistivity (4-300 K) in Aluminum- and Boron-Doped SiC Ceramics

    Article • Journal of the American Ceramic Society, April 2013, Wiley

    Professor Young-Wook Kim

  111. Effect of alkaline earth additives on the flexural strength of silicon oxycarbide-bonded silicon carbide ceramics

    Article • Ceramics International, March 2013, Elsevier

    Professor Young-Wook Kim

  112. High temperature strength of silicon carbide sintered with 1wt.% aluminum nitride and lutetium oxide

    Article • Journal of the European Ceramic Society, February 2013, Elsevier

    Professor Young-Wook Kim

  113. C/Si 몰 비가 TEOS와 페놀수지를 출발원료 사용하여 합성된 β-SiC 분말의 특성에 미치는 영향

    Article • Journal of the Korean Ceramic Society, January 2013, Korean Ceramic Society

    Professor Young-Wook Kim

  114. A Comparative Analysis of Employment Rate between Certified graduates and Non-certified graduates by the Engineering Education Accreditation at the University of Seoul

    Article • Journal of Engineering Education Research, January 2013, Korean Society for Engineering Education

    Professor Young-Wook Kim

  115. Electrical resistivity of silicon carbide ceramics sintered with 1wt% aluminum nitride and rare earth oxide

    Article • Journal of the European Ceramic Society, December 2012, Elsevier

    Professor Young-Wook Kim

  116. Influence of Y2O3 addition on electrical properties of β-SiC ceramics sintered in nitrogen atmosphere

    Article • Journal of the European Ceramic Society, December 2012, Elsevier

    Professor Young-Wook Kim

  117. Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane

    Article • Journal of the Korean Ceramic Society, November 2012, Korean Ceramic Society

    Professor Young-Wook Kim

  118. Low-temperature processing of porous SiC ceramics

    Article • Journal of Materials Science, October 2012, Springer Science + Business Media

    Professor Young-Wook Kim

  119. Processing of Vermiculite-Silica Composites with Prefer-Oriented Rod-Like Pores

    Article • Journal of the Korean Ceramic Society, July 2012, Korean Ceramic Society

    Professor Young-Wook Kim

  120. Effects of the initial α-SiC content on the microstructure, mechanical properties, and permeability of macroporous silicon carbide ceramics

    Article • Journal of the European Ceramic Society, June 2012, Elsevier

    Professor Young-Wook Kim

  121. Fe doping and magnetic properties of zincblende SiC ceramics

    Article • Journal of the European Ceramic Society, May 2012, Elsevier

    Professor Young-Wook Kim

  122. Effect of initial α-phase content on microstructure and flexural strength of macroporous silicon carbide ceramics

    Article • Metals and Materials International, April 2012, Springer Science + Business Media

    Professor Young-Wook Kim

  123. Influence of powder characteristics on the electrical resistivity of SiC ceramics

    Article • Journal of the Ceramic Society of Japan, January 2012, Ceramic Society of Japan

    Professor Young-Wook Kim

  124. Effects of silicon particle size on microstructure and permeability of silicon-bonded SiC ceramics

    Article • Journal of the Ceramic Society of Japan, January 2012, Ceramic Society of Japan

    Professor Young-Wook Kim

  125. Effect of additives on compressive strength and thermal conductivity of vermiculite-silica composites with layered structure

    Article • Journal of the Ceramic Society of Japan, January 2012, Ceramic Society of Japan

    Professor Young-Wook Kim

  126. Effect of forming methods on porosity and compressive strength of polysiloxane-derived porous silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2012, Ceramic Society of Japan

    Professor Young-Wook Kim

  127. Influence of small amount of sintering additives on unlubricated sliding wear properties of SiC ceramics

    Article • Ceramics International, December 2011, Elsevier

    Professor Young-Wook Kim

  128. Flexural Strength of Macroporous Silicon Carbide Ceramics

    Article • Journal of the Korean Ceramic Society, September 2011, Korean Ceramic Society

    Professor Young-Wook Kim

  129. Investigation on the Properties of a Microcellular Light-Weighted Humidity Controlling Tile

    Article • Journal of the Korean Ceramic Society, September 2011, Korean Ceramic Society

    Professor Young-Wook Kim

  130. Effective Nitrogen Doping for Fabricating Highly Conductive β-SiC Ceramics

    Article • Journal of the American Ceramic Society, August 2011, Wiley

    Professor Young-Wook Kim

  131. Effect of SiC particle size on flexural strength of porous self-bonded SiC ceramics

    Article • Metals and Materials International, August 2011, Springer Science + Business Media

    Professor Young-Wook Kim

  132. Influence of submicron SiC particle addition on porosity and flexural strength of porous self-bonded silicon carbide

    Article • Metals and Materials International, June 2011, Springer Science + Business Media

    Professor Young-Wook Kim

  133. Steam-Chest Molding of Expanded Polypropylene Foams. 2. Mechanism of Interbead Bonding

    Article • Industrial & Engineering Chemistry Research, May 2011, American Chemical Society (ACS)

    Professor Young-Wook Kim

  134. Electrodischarge-Machinable Silicon Carbide Ceramics Sintered with Yttrium Nitrate

    Article • Journal of the American Ceramic Society, February 2011, Wiley

    Professor Young-Wook Kim

  135. Processing highly porous SiC ceramics using poly(ether-co-octene) and hollow microsphere templates

    Article • Journal of Materials Science, January 2011, Springer Science + Business Media

    Professor Young-Wook Kim

  136. Processing of Open-Cell Silicon Carbide Foams by Steam Chest Molding and Carbothermal Reduction

    Article • Journal of the American Ceramic Society, January 2011, Wiley

    Professor Young-Wook Kim

  137. Processing and structural characteristics of encapsulated ZnO in porous polysiloxane-derived ceramics

    Article • Journal of the Ceramic Society of Japan, January 2011, Ceramic Society of Japan

    Professor Young-Wook Kim

  138. Effect of in situ-synthesized nano-size SiC addition on density and electrical resistivity of liquid-phase sintered silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2011, Ceramic Society of Japan

    Professor Young-Wook Kim

  139. Thermal conductivity and compressive strength anisotropy in vermiculite–ceramic composites with layered structure

    Article • Journal of the Ceramic Society of Japan, January 2011, Ceramic Society of Japan

    Professor Young-Wook Kim

  140. Effect of aluminum hydroxide content on porosity and strength of porous mullite-bonded silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2011, Ceramic Society of Japan

    Professor Young-Wook Kim

  141. Effect of filler addition on porosity and strength of polysiloxane-derived porous silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2011, Ceramic Society of Japan

    Professor Young-Wook Kim

  142. Effect of hot-forging on mechanical properties of silicon carbide sintered with Al2O3-Y2O3-MgO

    Article • Metals and Materials International, December 2010, Springer Science + Business Media

    Professor Young-Wook Kim

  143. 진공 압출성형 및 래밍성형 공정에 의한 탄화규소 캔들 필터 제조 및 특성 (II)

    Article • Journal of the Korean Ceramic Society, November 2010, Korean Ceramic Society

    Professor Young-Wook Kim

  144. Effect of Frit Content on Microstructure and Flexural Strength of Porous Frit-Bonded Al2O3Ceramics

    Article • Journal of the Korean Ceramic Society, November 2010, Korean Ceramic Society

    Professor Young-Wook Kim

  145. Effect of Template Content on Microstructure and Flexural Strength of Porous Mullite-Bonded Silicon Carbide Ceramics

    Article • Journal of the Korean Ceramic Society, November 2010, Korean Ceramic Society

    Professor Young-Wook Kim

  146. Microstructure and Permeability Property of Si Bonded Porous SiC with Variations in the Carbon Content

    Article • Journal of the Korean Ceramic Society, November 2010, Korean Ceramic Society

    Professor Young-Wook Kim

  147. Steam-Chest Molding of Expanded Polypropylene Foams. 1. DSC Simulation of Bead Foam Processing

    Article • Industrial & Engineering Chemistry Research, October 2010, American Chemical Society (ACS)

    Professor Young-Wook Kim

  148. Effect of alkaline earth metal oxide addition on flexural strength of porous mullite-bonded silicon carbide ceramics

    Article • Journal of Materials Science, October 2010, Springer Science + Business Media

    Professor Young-Wook Kim

  149. Processing of microcellular silicon carbide ceramics with a duplex pore structure

    Article • Journal of the European Ceramic Society, September 2010, Elsevier

    Professor Young-Wook Kim

  150. Processing of Silicon Oxycarbide Foams by Steam Chest Molding and Pyrolysis

    Article • Journal of the American Ceramic Society, August 2010, Wiley

    Professor Young-Wook Kim

  151. Effect of additives on mechanical properties of macroporous silicon carbide ceramics

    Article • Metals and Materials International, June 2010, Springer Science + Business Media

    Professor Young-Wook Kim

  152. Mechanical properties of SiC ceramics sintered with RE2O3 (RE: Sc, Lu, Y) and AlN additives

    Article • Metals and Materials International, April 2010, Springer Science + Business Media

    Professor Young-Wook Kim

  153. 출발 SiC 입자 크기가 Si3N4-Bonded SiC 세라믹스의 질화율과 강도에 미치는 영향

    Article • Journal of the Korean Ceramic Society, March 2010, Korean Ceramic Society

    Professor Young-Wook Kim

  154. Low-Temperature Processing of Silicon Oxycarbide-Bonded Silicon Carbide

    Article • Journal of the American Ceramic Society, March 2010, Wiley

    Professor Young-Wook Kim

  155. Engineering porosity in silicon carbide ceramics

    Article • Journal of Materials Science, February 2010, Springer Science + Business Media

    Professor Young-Wook Kim

  156. Processing of polysiloxane-derived porous ceramics: a review

    Article • Science and Technology of Advanced Materials, February 2010, Taylor & Francis

    Professor Young-Wook Kim

  157. Processing of porous silicon carbide with toughened strut microstructure

    Article • Journal of the Ceramic Society of Japan, January 2010, Ceramic Society of Japan

    Professor Young-Wook Kim, Masaki Narisawa

  158. Effect of additive composition on porosity and flexural strength of porous self-bonded SiC ceramics

    Article • Journal of the Ceramic Society of Japan, January 2010, Ceramic Society of Japan

    Professor Young-Wook Kim

  159. Suppression of free Si formation during liquid phase sintering of polysiloxane-derived, porous silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2010, Ceramic Society of Japan

    Professor Young-Wook Kim

  160. Effect of aluminum source on flexural strength of mullite-bonded porous silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2010, Ceramic Society of Japan

    Professor Young-Wook Kim

  161. Melt spinning and metal chloride vapor curing process on polymethylsilsesquioxane as SiOC fiber precursor

    Article • Journal of Applied Polymer Science, December 2009, Wiley

    Masaki Narisawa, Professor Young-Wook Kim

  162. Effect of aluminum nitride-scandia content on the microstructural and mechanical properties of sintered silicon carbide ceramics

    Article • Metals and Materials International, December 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  163. Fabrication and Properties of the SiC Candle Filter by Vacuum Extrusion and Ramming Process

    Article • Journal of the Korean Ceramic Society, November 2009, Korean Ceramic Society

    Professor Young-Wook Kim

  164. Low temperature processing of highly porous silicon carbide ceramics with improved flexural strength

    Article • Journal of Materials Science, November 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  165. Accelerated ceramization of polymethylsilsesquioxane by aluminum- based filler reductant

    Article • Applied Organometallic Chemistry, October 2009, Wiley

    Masaki Narisawa, Professor Young-Wook Kim

  166. Porosity control of porous silicon carbide ceramics

    Article • Journal of the European Ceramic Society, October 2009, Elsevier

    Professor Young-Wook Kim, Masaki Narisawa

  167. Low Temperature Processing and Properties of Porous Frit-Bonded SiC Ceramics

    Article • Journal of the Korean Ceramic Society, September 2009, Korean Ceramic Society

    Professor Young-Wook Kim

  168. 알루미늄 첨가가 다공질 Self-Bonded SiC 세라믹스의 기공률과 꺾임강도에 미치는 영향

    Article • Journal of the Korean Ceramic Society, September 2009, Korean Ceramic Society

    Professor Young-Wook Kim

  169. Effect of additive composition on microstructure and mechanical properties of SiC ceramics sintered with small amount of RE2O3 (RE: Sc, Lu, Y) and AlN

    Article • Journal of Materials Science, August 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  170. Effect of additive composition on microstructure and strength of porous silicon carbide ceramics

    Article • Journal of Materials Science, August 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  171. Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide Fibers

    Article • Advanced Materials Research, April 2009, Trans Tech Publications

    Masaki Narisawa, Professor Young-Wook Kim

  172. Indentation and contact damages on grain boundary controlled silicon carbide ceramics

    Article • Journal of Materials Science, March 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  173. Structural and Optical Characteristics of Crystalline Silicon Carbide Nanoparticles Synthesized by Carbothermal Reduction

    Article • Journal of the American Ceramic Society, February 2009, Wiley

    Professor Young-Wook Kim

  174. Effect of annealing on mechanical properties of silicon carbide sintered with aluminum nitride and scandium oxide

    Article • Metals and Materials International, February 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  175. Effects of Template Size and Content on Porosity and Strength of Macroporous Zirconia Ceramics

    Article • Journal of the Korean Ceramic Society, January 2009, Korean Ceramic Society

    Professor Young-Wook Kim

  176. 중공형 미세구를 이용한 마이크로셀룰라 지르코니아의 가공 특성 고찰

    Article • Journal of the Korean Ceramic Society, January 2009, Korean Ceramic Society

    Professor Young-Wook Kim

  177. Effect of inert filler addition on microstructure and strength of porous SiC ceramics

    Article • Journal of Materials Science, January 2009, Springer Science + Business Media

    Professor Young-Wook Kim

  178. Influence of Additives on Mechanical Properties in Liquid-Phase Sintered Silicon Carbide Ceramics

    Article • Key Engineering Materials, January 2009, Trans Tech Publications

    Professor Young-Wook Kim

  179. Effect of submicron silicon carbide powder addition on the processing and strength of reaction-sintered mullite-silicon carbide composites

    Article • Journal of the Ceramic Society of Japan, January 2009, Ceramic Society of Japan

    Professor Young-Wook Kim

  180. Influence of Additives on Mechanical Properties in Liquid-Phase Sintered Silicon Carbide Ceramics

    Article • December 2008, CrossRef Test Account

    Professor Young-Wook Kim

  181. Fabrication of Dense 2D SiC Fiber-SiC Matrix Composites by Slurry Infiltration and a Stacking Process

    Article • Metals and Materials International, October 2008, Springer Science + Business Media

    Professor Young-Wook Kim

  182. 기공형성제 크기 비(ratio)가 다공질 지르코니아 세라믹스의 기공율과 강도에 미치는 영향

    Article • Journal of the Korean Ceramic Society, September 2008, Korean Ceramic Society

    Professor Young-Wook Kim

  183. Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

    Article • Journal of the Korean Ceramic Society, July 2008, Korean Ceramic Society

    Professor Young-Wook Kim

  184. Effect of Si:C Ratio on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

    Article • Journal of the Korean Ceramic Society, May 2008, Korean Ceramic Society

    Professor Young-Wook Kim

  185. Fabrication of SiC Fiber-SiC Matrix Composites by Reaction Sintering

    Article • Journal of the Korean Ceramic Society, April 2008, Korean Ceramic Society

    Professor Young-Wook Kim

  186. Processing of Porous Silicon Carbide Ceramics from Carbon-Filled Polysiloxane by Extrusion and Carbothermal Reduction

    Article • Journal of the American Ceramic Society, April 2008, Wiley

    Professor Young-Wook Kim

  187. 다공질 지르코니아 세라믹스의 기공율 제어

    Article • Journal of the Korean Ceramic Society, January 2008, Korean Ceramic Society

    Professor Young-Wook Kim

  188. Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates

    Article • Journal of the European Ceramic Society, January 2008, Elsevier

    Professor Young-Wook Kim

  189. Effect of template size on microstructure and strength of porous silicon carbide ceramics

    Article • Journal of the Ceramic Society of Japan, January 2008, Ceramic Society of Japan

    Professor Young-Wook Kim

  190. Silicon carbide particle formation from carbon black —polymethylsilsesquioxane mixtures with melt pressing

    Article • Journal of the Ceramic Society of Japan, January 2008, Ceramic Society of Japan

    Professor Young-Wook Kim, Masaki Narisawa

  191. Fabrication of silicon oxycarbide foams from extruded blends of polysiloxane, low-density polyethylene (LDPE), and polymer microbead

    Article • Metals and Materials International, December 2007, Springer Science + Business Media

    Professor Young-Wook Kim

  192. Microstructure and properties of porous silicon carbide ceramics fabricated by carbothermal reduction and subsequent sintering process

    Article • Materials Science and Engineering A, August 2007, Elsevier

    Professor Young-Wook Kim

  193. Process for dense 2D SiC fiber-SiC matrix composites

    Article • Metals and Materials International, June 2007, Springer Science + Business Media

    Professor Young-Wook Kim

  194. Synthesis of Microcellular Cordierite Ceramics Derived from a Preceramic Polymer

    Article • Journal of the Korean Ceramic Society, May 2007, Korean Ceramic Society

    Professor Young-Wook Kim

  195. Effects of Additive Composition and Content on Sintered Density and Compressive Strength of Cordierite Ceramics

    Article • Journal of the Korean Ceramic Society, April 2007, Korean Ceramic Society

    Professor Young-Wook Kim

  196. Effect of Additive Composition on Fracture Toughness of In Situ-Toughened SiC−Si3N4Composites

    Article • Journal of the Korean Ceramic Society, April 2007, Korean Ceramic Society

    Professor Young-Wook Kim

  197. Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and Foaming

    Article • Journal of Materials Science, January 2007, Springer Science + Business Media

    Professor Young-Wook Kim

  198. Processing of Porous Cordierite Ceramics with Controlled Porosity

    Article • Journal of the Ceramic Society of Japan, January 2007, Ceramic Society of Japan

    Professor Young-Wook Kim

  199. Processing of Porous Silicon Oxycarbide Ceramics from Extruded Blends of Polysiloxane and Polymer Microbead

    Article • Journal of the Ceramic Society of Japan, January 2007, Ceramic Society of Japan

    Professor Young-Wook Kim

  200. Mechanical Properties and Contact Damages of Nanostructured Silicon Carbide Ceramics

    Article • Journal of the Ceramic Society of Japan, January 2007, Ceramic Society of Japan

    Professor Young-Wook Kim

  201. High-temperature strength of silicon carbide ceramics sintered with rare-earth oxide and aluminum nitride

    Article • Acta Materialia, January 2007, Elsevier

    Professor Young-Wook Kim

  202. Processing of Cellular Glasses Using Glass Microspheres

    Article • Journal of the American Ceramic Society, October 2006, Wiley

    Professor Young-Wook Kim

  203. Processing and Mechanical Properties of Microcellular Ceramics

    Article • August 2006, CrossRef Test Account

    Professor Young-Wook Kim

  204. Processing of microcellular cordierite ceramics from a preceramic polymer

    Article • Scripta Materialia, April 2006, Elsevier

    Professor Young-Wook Kim

  205. Fabrication of dense bulk nano-Si3N4 ceramics without secondary crystalline phase

    Article • Scripta Materialia, February 2006, Elsevier

    Professor Young-Wook Kim

  206. Grain boundary crystallization during furnace cooling of α-SiC sintered with Y2O3–Al2O3–CaO

    Article • Journal of the European Ceramic Society, January 2006, Elsevier

    Professor Young-Wook Kim

  207. Processing and Mechanical Properties of Microcellular Ceramics

    Article • Key Engineering Materials, January 2006, Trans Tech Publications

    Professor Young-Wook Kim

  208. Sinterability of Nano-Sized Silicon Carbide Powders

    Article • Journal of the Ceramic Society of Japan, January 2006, Ceramic Society of Japan

    Professor Young-Wook Kim

  209. Processing of Highly Porous, Open-Cell, Microcellular Silicon Carbide Ceramics by Expansion Method Using Expandable Microspheres

    Article • Journal of the Ceramic Society of Japan, January 2006, Ceramic Society of Japan

    Professor Young-Wook Kim

  210. Processing of Microcellular Mullite

    Article • Journal of the American Ceramic Society, December 2005, Wiley

    Professor Young-Wook Kim

  211. Effect of Heat Treatments on the Crack-Healing and Static Fatigue Behavior of Silicon Carbide Sintered with Sc2O3 and AlN

    Article • Journal of the American Ceramic Society, December 2005, Wiley

    Professor Young-Wook Kim

  212. Processing and mechanical properties of porous silica-bonded silicon carbide ceramics

    Article • Metals and Materials International, October 2005, Springer Science + Business Media

    Professor Young-Wook Kim

  213. Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction

    Article • Journal of the American Ceramic Society, October 2005, Wiley

    Professor Young-Wook Kim

  214. A simple pressing route to closed-cell microcellular ceramics

    Article • Scripta Materialia, October 2005, Elsevier

    Professor Young-Wook Kim

  215. Heat-resistant silicon carbide with aluminum nitride and scandium oxide

    Article • Acta Materialia, October 2005, Elsevier

    Professor Young-Wook Kim

  216. Fabrication of Heat-Resistant Silicon Carbide Ceramics by Controlling Intergranular Phase

    Article • June 2005, CrossRef Test Account

    Professor Young-Wook Kim

  217. Cutting performance of Al2O3-SiC nanocomposite tools

    Article • Journal of Materials Science, February 2005, Springer Science + Business Media

    Professor Young-Wook Kim

  218. Texture and Fracture Toughness Anisotropy in Silicon Carbide

    Article • Journal of the American Ceramic Society, January 2005, Wiley

    Professor Young-Wook Kim

  219. R-Curve Behavior of Silicon Nitride-Titanium Nitride Composites

    Article • Journal of the American Ceramic Society, January 2005, Wiley

    Professor Young-Wook Kim

  220. Mechanical properties of hot-forged silicon carbide ceramics

    Article • Scripta Materialia, January 2005, Elsevier

    Professor Young-Wook Kim

  221. Microstructure and Mechanical Properties of alpha-Silicon Carbide Sintered with Yttrium-Aluminum Garnet and Silica

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  222. Fine-Grained Silicon Carbide Ceramics with Oxynitride Glass

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  223. Microstructural Control for Strengthening of Silicon Carbide Ceramics

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  224. Heat-Resistant Silicon Carbide with Aluminum Nitride and Erbium Oxide

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  225. Refined Continuum Model on the Behavior of Intergranular Films in Silicon Nitride Ceramics

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  226. Effect of Annealing Conditions on Microstructural Development and Phase Transformation in Silicon Carbide

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  227. Relationship between Microstructure and Fracture Toughness of Toughened Silicon Carbide Ceramics

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  228. High-Temperature Strength of Liquid-Phase-Sintered SiC with AlN and Re2O3 (RE = Y, Yb)

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  229. Phase Transformation and Texture in Hot-Forged or Annealed Liquid-Phase-Sintered Silicon Carbide Ceramics

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    Professor Young-Wook Kim

  230. Intergranular film thickness of self-reinforced silicon carbide ceramics

    Article • Journal of the European Ceramic Society, December 2004, Elsevier

    Professor Young-Wook Kim

  231. Processing of closed-cell silicon oxycarbide foams from a preceramic polymer

    Article • Journal of Materials Science, September 2004, Springer Science + Business Media

    Professor Young-Wook Kim

  232. Cross-linking behavior of a polysiloxane in preceramic foam processing

    Article • Journal of Materials Science, August 2004, Springer Science + Business Media

    Professor Young-Wook Kim

  233. Effect of processing on densification of nanostructured SiC ceramics fabricated by two-step sintering

    Article • Journal of Materials Science, June 2004, Springer Science + Business Media

    Professor Young-Wook Kim

  234. Microstructure stability of fine-grained silicon carbide ceramics during annealing

    Article • Journal of Materials Science, June 2004, Springer Science + Business Media

    Professor Young-Wook Kim

  235. Intergranular glassy phase free SiC ceramics retains strength at 1500 °C

    Article • Scripta Materialia, May 2004, Elsevier

    Professor Young-Wook Kim

  236. Effect of inert filler addition on pore size and porosity of closed-cell silicon oxycarbide foams

    Article • Journal of Materials Science, May 2004, Springer Science + Business Media

    Professor Young-Wook Kim

  237. Cutting performance of Si3N4 based SiC ceramic cutting tools

    Article • KSME International Journal, March 2004, Springer Science + Business Media

    Professor Young-Wook Kim

  238. Development of Al2O3–SiC composite tool for machining application

    Article • Ceramics International, January 2004, Elsevier

    Professor Young-Wook Kim

  239. Toughening Mechanisms in SiC-TiC Composites

    Article • Journal of the Ceramic Society of Japan, January 2004, Ceramic Society of Japan

    Professor Young-Wook Kim

  240. Fabrication of Microcellular Ceramics Using Gaseous Carbon Dioxide

    Article • Journal of the American Ceramic Society, December 2003, Wiley

    Professor Young-Wook Kim

  241. Processing of microcellular preceramics using carbon dioxide

    Article • Composites Science and Technology, December 2003, Elsevier

    Professor Young-Wook Kim

  242. Fabrication of Dense Nanostructured Silicon Carbide Ceramics through Two-Step Sintering

    Article • Journal of the American Ceramic Society, October 2003, Wiley

    Professor Young-Wook Kim

  243. Texture in Silicon Nitride Seeded with Silicon Nitride Whiskers of Different Sizes

    Article • Journal of the American Ceramic Society, June 2003, Wiley

    Professor Young-Wook Kim

  244. Thermal conductivity of liquid phase sintered silicon carbide

    Article • Journal of the European Ceramic Society, June 2003, Elsevier

    Professor Young-Wook Kim

  245. Crack-Healing Behavior of Liquid-Phase-Sintered Silicon Carbide Ceramics

    Article • Journal of the American Ceramic Society, March 2003, Wiley

    Professor Young-Wook Kim

  246. Fabrication of Porous Silicon Oxycarbide Ceramics by Foaming Polymer Liquid and Compression Molding

    Article • Journal of the Ceramic Society of Japan, January 2003, Ceramic Society of Japan

    Professor Young-Wook Kim

  247. High-Temperature Strength of Liquid-Phase-Sintered SiC Ceramics with Oxynitride Glass

    Article • Key Engineering Materials, January 2003, Trans Tech Publications

    Professor Young-Wook Kim

  248. Microstructure and fracture toughness of in-situ-toughened SiC composites

    Article • International Journal of Materials and Product Technology, January 2003, Inderscience Publishers

    Professor Young-Wook Kim

  249. Article • Journal of Materials Science, January 2003, Springer Science + Business Media

    Professor Young-Wook Kim

  250. Oxidation Behavior of Liquid-Phase Sintered Silicon Carbide with Aluminum Nitride and Rare-Earth Oxides (Re2O3, where Re = Y, Er, Yb)

    Article • Journal of the American Ceramic Society, September 2002, Wiley

    Professor Young-Wook Kim

  251. Microstructural development of liquid-phase-sintered silicon carbide during annealing with uniaxial pressure

    Article • Journal of the European Ceramic Society, July 2002, Elsevier

    Professor Young-Wook Kim

  252. Superplastic behavior of liquid-phase sintered β-SiC prepared with oxynitride glasses in an N2 atmosphere

    Article • Journal of the European Ceramic Society, February 2002, Elsevier

    Professor Young-Wook Kim

  253. Texture Development and Phase Transformation in Liquid-Phase-Sintered SiC Ceramics

    Article • Materials Science Forum, January 2002, Trans Tech Publications

    Professor Young-Wook Kim

  254. Article • Journal of Materials Science Letters, January 2002, Springer Science + Business Media

    Professor Young-Wook Kim

  255. Article • Journal of Materials Science Letters, January 2002, Springer Science + Business Media

    Professor Young-Wook Kim

  256. Article • Journal of Materials Science Letters, January 2002, Springer Science + Business Media

    Professor Young-Wook Kim

  257. Article • Journal of Materials Science Letters, January 2002, Springer Science + Business Media

    Professor Young-Wook Kim

  258. Transmission electron microscopy observation in a liquid-phase-sintered SiC with oxynitride glass

    Article • Journal of Materials Research, August 2001, Cambridge University Press

    Professor Young-Wook Kim

  259. Epitaxial growth of cubic SiC thin films on silicon using single molecular precursors by metalorganic chemical vapor deposition

    Article • Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, July 2001, American Vacuum Society

    Professor Young-Wook Kim

  260. Slow crack growth behavior in Si3N4 sintered with Yb2Si2O7 tie-line composition additives

    Article • Journal of the European Ceramic Society, April 2001, Elsevier

    Professor Young-Wook Kim

  261. Preferred orientation of beta-phase and its mechanisms in a fine-grained silicon-nitride-based ceramic

    Article • Journal of Materials Research, February 2001, Cambridge University Press

    Professor Young-Wook Kim

  262. Effect of initial α-phase content of SiC on microstructure and mechanical properties of SiC–TiC composites

    Article • Journal of the European Ceramic Society, January 2001, Elsevier

    Professor Young-Wook Kim

  263. Article • Journal of Materials Science Letters, January 2001, Springer Science + Business Media

    Professor Young-Wook Kim

  264. Article • Journal of Materials Science, January 2001, Springer Science + Business Media

    Professor Young-Wook Kim

  265. Article • Journal of Materials Science Letters, January 2001, Springer Science + Business Media

    Professor Young-Wook Kim

  266. Article • Journal of Materials Science, January 2001, Springer Science + Business Media

    Professor Young-Wook Kim

  267. Texture Development in Silicon Nitride-Silicon OxynitrideIn SituComposites via Superplastic Deformation

    Article • Journal of the American Ceramic Society, December 2000, Wiley

    Professor Young-Wook Kim

  268. Effect of initial particle size on microstructure of liquid-phase sintered α-silicon carbide

    Article • Journal of the European Ceramic Society, June 2000, Elsevier

    Professor Young-Wook Kim

  269. Article • Journal of Materials Science Letters, January 2000, Springer Science + Business Media

    Professor Young-Wook Kim

  270. Article • Journal of Materials Science, January 2000, Springer Science + Business Media

    Professor Young-Wook Kim

  271. Article • Journal of Materials Science, January 2000, Springer Science + Business Media

    Professor Young-Wook Kim

  272. Article • Journal of Materials Science, January 2000, Springer Science + Business Media

    Professor Young-Wook Kim

  273. Oxidation behavior of hot-pressed Si3N4 with Re2O3 (Re=Y, Yb, Er, La)

    Article • Journal of the European Ceramic Society, December 1999, Elsevier

    Professor Young-Wook Kim

  274. Mechanism of grain growth in liquid-phase-sintered β–SiC

    Article • Journal of Materials Research, November 1999, Cambridge University Press

    Professor Young-Wook Kim

  275. Fabrication and Mechanical Properties of Silicon Carbide-Silicon Nitride Composites with Oxynitride Glass

    Article • Journal of the American Ceramic Society, April 1999, Wiley

    Professor Young-Wook Kim

  276. Article • Journal of Materials Science, January 1999, Springer Science + Business Media

    Professor Young-Wook Kim

  277. Effect of Initial α-Phase Content on Microstructure and Mechanical Properties of Sintered Silicon Carbide

    Article • Journal of the American Ceramic Society, December 1998, Wiley

    Professor Young-Wook Kim

  278. Microstructure and mechanical properties of self-Reinforced alpha–Silicon carbide

    Article • Ceramics International, September 1998, Elsevier

    Professor Young-Wook Kim

  279. Effects of additive amount on microstructure and fracture toughness of SiCTiB2 composites

    Article • Ceramics International, January 1998, Elsevier

    Professor Young-Wook Kim

  280. Article • Journal of Materials Science, January 1998, Springer Science + Business Media

    Professor Young-Wook Kim

  281. Article • Journal of Materials Science Letters, January 1998, Springer Science + Business Media

    Professor Young-Wook Kim

  282. Microstructural Development of Silicon Carbide Containing Large Seed Grains

    Article • Journal of the American Ceramic Society, January 1997, Wiley

    Professor Young-Wook Kim

  283. Article • Journal of Materials Science Letters, January 1997, Springer Science + Business Media

    Professor Young-Wook Kim

  284. Article • Journal of Materials Science, January 1997, Springer Science + Business Media

    Professor Young-Wook Kim

  285. Article • Journal of Materials Science, January 1997, Springer Science + Business Media

    Professor Young-Wook Kim

  286. Fabrication of silicon carbide nanoceramics

    Article • Journal of Materials Research, July 1996, Cambridge University Press

    Professor Young-Wook Kim

  287. In S/Yu-Toughened Silicon Carbide-Titanium Carbide Composites

    Article • Journal of the American Ceramic Society, June 1996, Wiley

    Professor Young-Wook Kim

  288. Influence of Silica Content on Liquid Phase Sintering of Silicon Carbide with Yttrium-Aluminum Garnet

    Article • Journal of the Ceramic Society of Japan, January 1996, Ceramic Society of Japan

    Professor Young-Wook Kim

  289. SiC-TiC and SiC-TiB2 composites densified by liquid-phase sintering

    Article • Journal of Materials Science, January 1996, Springer Science + Business Media

    Professor Young-Wook Kim

  290. High temperature strength and oxidation behaviour of Er2Si2O7-Si3N4 ceramics

    Article • Journal of Materials Science Letters, January 1996, Springer Science + Business Media

    Professor Young-Wook Kim

  291. Effect of multilayer coating on mechanical properties of Nicalon-fibre-reinforced silicon carbide composites

    Article • Journal of Materials Science, January 1996, Springer Science + Business Media

    Professor Young-Wook Kim

  292. Grain Growth and Fracture Toughness of Fine-Grained Silicon Carbide Ceramics

    Article • Journal of the American Ceramic Society, November 1995, Wiley

    Professor Young-Wook Kim

  293. Effect of reactant depletion on the microstructure and preferred orientation of polycrystalline SiC films by chemical vapor deposition

    Article • Thin Solid Films, October 1995, Elsevier

    Professor Young-Wook Kim

  294. R-curve behaviour of sintered silicon nitride

    Article • Journal of Materials Science, August 1995, Springer Science + Business Media

    Professor Young-Wook Kim

  295. Strengthening of silicon carbide by surface compressive layer

    Article • Journal of Materials Science, February 1995, Springer Science + Business Media

    Professor Young-Wook Kim

  296. Influence of Powder Characteristics on Liquid Phase Sintering of Silicon Carbide

    Article • Journal of the Ceramic Society of Japan, January 1995, Ceramic Society of Japan

    Professor Young-Wook Kim

  297. R-curve behaviour and microstructure of sintered silicon nitride

    Article • Journal of Materials Science, January 1995, Springer Science + Business Media

    Professor Young-Wook Kim

  298. Nicalon-fibre-reinforced silicon-carbide composites via polymer solution infiltration and chemical vapour infiltration

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Professor Young-Wook Kim

  299. Composition and hardness of chemically vapour-deposited silicon carbide with various microstructures

    Article • Journal of Materials Science Letters, January 1993, Springer Science + Business Media

    Professor Young-Wook Kim

  300. Tape Casting of Silicon Nitride

    Article • MRS Proceedings, January 1992, Cambridge University Press

    Professor Young-Wook Kim

  301. Effect of polycarbosilane addition on mechanical properties of hot-pressed silicon carbide

    Article • Journal of Materials Science, January 1992, Springer Science + Business Media

    Professor Young-Wook Kim

  302. Pressureless sintering of Al2O3-SiC whisker composites

    Article • Journal of Materials Science, January 1991, Springer Science + Business Media

    Professor Young-Wook Kim

  303. Pressureless Sintering of Alumina-Titanium Carbide Composites

    Article • Journal of the American Ceramic Society, August 1989, Wiley

    Professor Young-Wook Kim