All Stories

  1. Residual stress measurement of Al/steel dissimilar friction stir weld

    Article • Science and Technology of Welding & Joining, March 2019, Taylor & Francis

    Professor Yoshihiko Uematsu

  2. EBSD-assisted fractography of sub-surface fatigue crack initiation mechanism in the ultrasonic-shot-peened βeta-type titanium alloy

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2018, Wiley

    Professor Yoshihiko Uematsu

  3. High Cycle Fatigue Properties of Multi-Directionally Forged Commercial Purity Grade 2 Ti Plate

    Article • Materials Science Forum, March 2018, Trans Tech Publications

    Professor Yoshihiko Uematsu

  4. Fatigue limit prediction of cast aluminum alloy using Murakami's style equation.

    Article • International Journal of Structural Integrity, December 2017, Emerald

    Professor Yoshihiko Uematsu

  5. Fatigue behaviour of dissimilar friction stir welds between wrought and cast aluminium alloys

    Article • Science and Technology of Welding & Joining, August 2017, Taylor & Francis

    Professor Yoshihiko Uematsu

  6. Crystallographic Analysis of Fatigue Crack Initiation Behavior in Coarse-Grained Magnesium Alloy Under Tension-Tension Loading Cycles

    Article • Journal of Materials Engineering and Performance, June 2017, Springer Science + Business Media

    Professor Yoshihiko Uematsu

  7. Influence of local fatigue damage evolution on crack initiation behavior in a friction stir welded Al-Mg-Sc alloy

    Article • International Journal of Fatigue, June 2017, Elsevier

    Professor Yoshihiko Uematsu

  8. Microstructural Modification of AZ91 Magnesium Alloy Using Friction Stir Processing and Carbon Fibers

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Professor Yoshihiko Uematsu

  9. Non-destructive evaluation of fatigue damage and fatigue crack initiation in type 316 stainless steel by positron annihilation line-shape and lifetime analyses

    Article • Fatigue & Fracture of Engineering Materials & Structures, December 2016, Wiley

    Professor Yoshihiko Uematsu

  10. Fatigue behavior of AZ31 magnesium alloy evaluated using single crystal micro cantilever specimen

    Article • International Journal of Fatigue, December 2016, Elsevier

    Professor Yoshihiko Uematsu

  11. Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Professor Yoshihiko Uematsu

  12. Defect-dominated fatigue behavior in type 630 stainless steel fabricated by selective laser melting

    Article • Materials Science and Engineering A, June 2016, Elsevier

    Professor Yoshihiko Uematsu

  13. Fatigue behaviour of Al/steel dissimilar resistance spot welds fabricated using Al–Mg interlayer

    Article • Science and Technology of Welding & Joining, March 2016, Maney Publishing

    Professor Yoshihiko Uematsu

  14. EBSD analysis of fatigue crack initiation behavior in coarse-grained AZ31 magnesium alloy

    Article • International Journal of Fatigue, March 2016, Elsevier

    Professor Yoshihiko Uematsu

  15. Characteristics of Keyhole Refill Process using Friction Stir Spot Welding

    Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2016, Japan Welding Society

    Professor Yoshihiko Uematsu

  16. Delaying Effect of High-Density Electric Current on Fatigue Crack Growth in A6061-T6 Aluminum Alloy

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Professor Yoshihiko Uematsu

  17. Effect of Grain Size on Fatigue Behavior in AZ61 Mg Alloys Fabricated by MDFing

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Professor Yoshihiko Uematsu

  18. Joint microstructures, mechanical properties and fatigue behavior of ferritic stainless steel SUS 430 welds with different filler metals

    Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2016, Japan Welding Society

    Professor Yoshihiko Uematsu

  19. Effect of friction stir processing conditions on fatigue behavior and texture development in A356-T6 cast aluminum alloy

    Article • International Journal of Fatigue, November 2015, Elsevier

    Professor Yoshihiko Uematsu

  20. Fatigue behavior of friction stir welded Al–Mg–Sc alloy

    Article • International Journal of Fatigue, August 2015, Elsevier

    Professor Yoshihiko Uematsu

  21. Effect of sensitization on corrosion fatigue behavior of type 304 stainless steel annealed in nitrogen gas

    Article • Materials Science and Engineering A, July 2015, Elsevier

    Professor Yoshihiko Uematsu

  22. Fatigue behaviour of dissimilar Al alloy/galvanised steel friction stir spot welds fabricated by scroll grooved tool without probe

    Article • Science and Technology of Welding & Joining, June 2015, Taylor & Francis

    Professor Yoshihiko Uematsu

  23. Effect of hydrogen on fatigue crack propagation behavior of wrought magnesium alloy AZ61 in NaCl solution under controlled cathodic potentials

    Article • Engineering Fracture Mechanics, March 2015, Elsevier

    Professor Yoshihiko Uematsu

  24. Fatigue behavior of bulk β-type titanium alloy Ti–15Mo–5Zr–3Al annealed in high temperature nitrogen gas

    Article • Materials Science and Engineering A, March 2015, Elsevier

    Professor Yoshihiko Uematsu

  25. Effect of Interlayer Thickness on Fatigue Behavior in A5052 Aluminum Alloy with Diamond-Like Carbon/Anodic-Oxide Hybrid Coating

    Article • MATERIALS TRANSACTIONS, January 2015, Japan Institute of Metals

    Professor Yoshihiko Uematsu

  26. Effect of solution treatment after nitriding on fatigue properties in type 304 stainless steel

    Article • International Journal of Fatigue, November 2014, Elsevier

    Professor Yoshihiko Uematsu

  27. Improvement of fatigue properties in type 304 stainless steel by annealing treatment in nitrogen gas

    Article • Materials Science and Engineering A, June 2014, Elsevier

    Professor Yoshihiko Uematsu

  28. High-cycle fatigue properties of beta Ti alloy 55Ti-30Nb-10Ta-5Zr, gum metal

    Article • Fatigue & Fracture of Engineering Materials & Structures, May 2014, Wiley

    Professor Yoshihiko Uematsu

  29. Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy under Controlled Cathodic Potential

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Professor Yoshihiko Uematsu

  30. Improvement of Fatigue Properties in a Cast Aluminum Alloy by Roller Burnishing and Friction Stir Processing

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Professor Yoshihiko Uematsu

  31. Fatigue crack propagation of AZ61 magnesium alloy under controlled humidity and visualization of hydrogen diffusion along the crack wake

    Article • International Journal of Fatigue, February 2014, Elsevier

    Professor Yoshihiko Uematsu

  32. Effect of casting defects and roller burnishing on fatigue properties of a cast aluminum alloy AC4CH

    Article • June 2013, WITPRESS LTD.

    Professor Yoshihiko Uematsu

  33. Effect of interlayer thickness on fatigue behavior in A5052 aluminum alloy with DLC/thermally sprayed WC-12Co hybrid coatings

    Article • June 2013, WITPRESS LTD.

    Professor Yoshihiko Uematsu

  34. Fatigue behavior of Ti-15Mo-5Zr-3Al β-type titanium alloy with surface hardened layer induced by annealing in nitrogen gas

    Article • June 2013, WITPRESS LTD.

    Professor Yoshihiko Uematsu

  35. Fatigue behaviour of friction stir welded A7075-T6 aluminium alloy in air and 3% NaCl solution

    Article • Welding International, June 2013, Taylor & Francis

    Professor Yoshihiko Uematsu

  36. Effect of Laves Phase Precipitation on Fatigue Behavior of Austenitic Stainless Steel Type 347 in Laboratory Air and in 3%NaCl Solution

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 2013, Japan Society of Mechanical Engineers

    Professor Yoshihiko Uematsu

  37. Effect of Strain-Induced Martensitic Transformation on High Cycle Fatigue Behavior in Cyclically-Prestrained Type 304

    Article • Journal of the Society of Materials Science Japan, January 2013, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  38. Effects of shot peening on fatigue behavior in high speed steel and cast iron with spheroidal vanadium carbides dispersed within martensitic-matrix microstructure

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Professor Yoshihiko Uematsu

  39. Thickness Effect of Interlayer on Fatigue Behavior and Fatigue Fracture A5052 Mechanisms in Aluminum Alloy with DLC/Thermally Sprayed WC-12Co Hybrid Coatings

    Article • Journal of the Society of Materials Science Japan, January 2013, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  40. Fatigue Behavior of A356 Cast Aluminum Alloy Microstructurally Modified by Friction Stir Processing under Low Strain Rate Condition

    Article • Key Engineering Materials, November 2012, Trans Tech Publications

    Professor Yoshihiko Uematsu

  41. Fatigue Properties of Solution-Treated Type 304 Stainless Steel after Nitriding

    Article • Key Engineering Materials, November 2012, Trans Tech Publications

    Professor Yoshihiko Uematsu

  42. Fatigue Test of Small Sized AZ31 Magnesium Alloy Using Micropillar Specimen

    Article • Key Engineering Materials, November 2012, Trans Tech Publications

    Professor Yoshihiko Uematsu

  43. Some factors exerting an influence on the coaxing effect of austenitic stainless steels

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2012, Wiley

    Professor Yoshihiko Uematsu

  44. Comparative study of fatigue behaviour in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds fabricated by scroll grooved tool without probe

    Article • Science and Technology of Welding & Joining, July 2012, Taylor & Francis

    Professor Yoshihiko Uematsu

  45. Fatigue Behavior of A5052 Aluminum Alloy with DLC/Thermally Sprayed WC-12Co Hybrid Coatings

    Article • Advanced Materials Research, June 2012, Trans Tech Publications

    Professor Yoshihiko Uematsu

  46. Effect of Film Elastic Modulus on Fatigue Behavior of Wrought Magnesium Alloy AZ61 Coated with DLC Film

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 2012, Japan Society of Mechanical Engineers

    Professor Yoshihiko Uematsu

  47. Effects of Weld Metal and Test Temperature on Fatigue Behavior in Type 444 Stainless Steel Welds

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 2012, Japan Society of Mechanical Engineers

    Professor Yoshihiko Uematsu

  48. Non-destructive inspection of welding defects in friction stir welds and prediction of their fatigue life

    Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2012, Japan Welding Society

    Professor Yoshihiko Uematsu

  49. Stress corrosion cracking behavior of the wrought magnesium alloy AZ31 under controlled cathodic potentials

    Article • Materials Science and Engineering A, January 2012, Elsevier

    Professor Yoshihiko Uematsu

  50. Fatigue behaviour of dissimilar friction stir spot welds between A6061-T6 and low carbon steel sheets welded by a scroll grooved tool without probe

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2011, Wiley

    Professor Yoshihiko Uematsu

  51. Effect of DLC Film on Fatigue Behavior in Alloy Steels with Different Hardness and Inclusion Size

    Article • Journal of the Society of Materials Science Japan, January 2011, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  52. Effect of Film Elastic Modulus on Fatigue Behaviour of DLC-Coated Wrought Magnesium Alloy AZ61

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Yoshihiko Uematsu

  53. Effect of quantity of martensitic transformation on fatigue behavior in type 304 stainless steel

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Yoshihiko Uematsu

  54. Effect of σ-phase Embrittlement on Fatigue Behavior in High-Chromium Ferritic Stainless Steel

    Article • Journal of the Society of Materials Science Japan, January 2011, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  55. Effects of Strain-Induced Martensitic Transformation on Fatigue Behavior of Type 304 Stainless Steel and Phase Transformation Analysis by EBSD

    Article • Journal of the Society of Materials Science Japan, January 2011, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  56. Hydrogen Embrittlement Type Stress Corrosion Cracking Behavior of Wrought Magnesium Alloy AZ31

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Yoshihiko Uematsu

  57. Improvement of corrosion fatigue strength of magnesium alloy by multilayer diamond-like carbon coatings

    Article • Surface and Coatings Technology, January 2011, Elsevier

    Professor Yoshihiko Uematsu

  58. Microstructural Changes of High-Chromium Ferritic Stainless Steel Subjected to Cyclic Loading in 475°C Embrittlement Region

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Yoshihiko Uematsu

  59. Effect of thick DLC coating on fatigue behaviour of magnesium alloy in laboratory air and demineralised water

    Article • Fatigue & Fracture of Engineering Materials & Structures, May 2010, Wiley

    Professor Yoshihiko Uematsu

  60. A newly developed tool without probe for friction stir spot welding and its performance

    Article • Journal of Materials Processing Technology, April 2010, Elsevier

    Professor Yoshihiko Uematsu

  61. Effect of strain-induced martensitic transformation on fatigue behavior of type 304 stainless steel

    Article • Procedia Engineering, April 2010, Elsevier

    Professor Yoshihiko Uematsu

  62. Effect of

    Article • Procedia Engineering, April 2010, Elsevier

    Professor Yoshihiko Uematsu

  63. Effects of HIP and forging on fracture behaviour in cast iron with spheroidal vanadium carbides dispersed within martensitic-matrix microstructure

    Article • Materials Science and Engineering A, April 2010, Elsevier

    Professor Yoshihiko Uematsu

  64. Fatigue behaviour in AZ80A magnesium alloy with DLC/thermally splayed WC-12Co hybrid coating

    Article • Procedia Engineering, April 2010, Elsevier

    Professor Yoshihiko Uematsu

  65. Fatigue behaviour of dissimilar friction stir spot weld between A6061 and SPCC welded by a scrolled groove shoulder tool

    Article • Procedia Engineering, April 2010, Elsevier

    Professor Yoshihiko Uematsu

  66. Fatigue Behaviour of Friction Stir Processed Cast Aluminium and Magnesium Alloys

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Yoshihiko Uematsu

  67. Fundamentals of Fatigue and Recent Trends on Fatigue Design in Mechanical Structures

    Article • Journal of the Society of Materials Science Japan, January 2010, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  68. Fatigue behaviour of friction stir welds without neither welding flash nor flaw in several aluminium alloys

    Article • International Journal of Fatigue, October 2009, Elsevier

    Professor Yoshihiko Uematsu

  69. Effect of aging treatment on fatigue behaviour in extruded AZ61 and AZ80 magnesium alloys

    Article • Materials Science and Engineering A, August 2009, Elsevier

    Professor Yoshihiko Uematsu

  70. Effect of post-heat treatment on the fatigue behaviour of a friction stir spot-welded Al–Mg–Si alloy

    Article • Welding International, July 2009, Taylor & Francis

    Professor Yoshihiko Uematsu

  71. Fatigue behaviour of cast magnesium alloy AZ91 microstructurally modified by friction stir processing

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2009, Wiley

    Professor Yoshihiko Uematsu

  72. Fatigue crack propagation and fracture mechanisms of wrought magnesium alloys in different environments

    Article • International Journal of Fatigue, July 2009, Elsevier

    Professor Yoshihiko Uematsu

  73. Comparison of fatigue behaviour between resistance spot and friction stir spot welded aluminium alloy sheets

    Article • Science and Technology of Welding & Joining, January 2009, Taylor & Francis

    Professor Yoshihiko Uematsu

  74. Aging and Fatigue Behaviour at Elevated Temperatures in Ferritic Stainless Steels with Different Cr Contents

    Article • Journal of the Society of Materials Science Japan, January 2009, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  75. Effect of Friction Stir Processing on the Fatigue Behaviour of Cast Aluminium Alloy

    Article • Journal of the Society of Materials Science Japan, January 2009, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  76. Fatigue Behavior of Type 304N2 High-Nitrogen Austenitic Stainless Steel

    Article • Journal of the Society of Materials Science Japan, January 2009, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  77. Fatigue Behaviour of Friction Stir Welded A7075-T6 Aluminium Alloy in Air and 3% NaCl Solution

    Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2009, Japan Welding Society

    Professor Yoshihiko Uematsu

  78. The First Japan-China Joint Symposium on Fatigue of Engineering Materials and Structures

    Article • Journal of the Society of Materials Science Japan, January 2009, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  79. Effects of annealing and quenching on fatigue behaviour in type 444 ferritic stainless steel

    Article • Fatigue & Fracture of Engineering Materials & Structures, November 2008, Wiley

    Professor Yoshihiko Uematsu

  80. Effect of re-filling probe hole on tensile failure and fatigue behaviour of friction stir spot welded joints in Al–Mg–Si alloy

    Article • International Journal of Fatigue, October 2008, Elsevier

    Professor Yoshihiko Uematsu

  81. Fatigue behaviour of SiC-particulate-reinforced aluminium alloy composites with different particle sizes at elevated temperatures

    Article • Composites Science and Technology, October 2008, Elsevier

    Professor Yoshihiko Uematsu

  82. Effect of temperature on high cycle fatigue behaviour in 18Cr–2Mo ferritic stainless steel

    Article • International Journal of Fatigue, April 2008, Elsevier

    Professor Yoshihiko Uematsu

  83. Corrosion fatigue behavior of extruded AZ80, AZ61, and AM60 magnesium alloys in distilled water

    Article • Strength of Materials, January 2008, Springer Science + Business Media

    Professor Yoshihiko Uematsu

  84. Effect of Post Heat Treatment on Fatigue Behaviour of Friction Stir Spot Welded Al-Mg-Si Alloy

    Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2008, Japan Welding Society

    Professor Yoshihiko Uematsu

  85. Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys

    Article • Strength of Materials, January 2008, Springer Science + Business Media

    Professor Yoshihiko Uematsu

  86. Fatigue Behaviour of Resistance Spot Welded Joints of Al-Mg-Si Alloy

    Article • Journal of the Society of Materials Science Japan, January 2008, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  87. Effect of tool geometry on microstructure and static strength in friction stir spot welded aluminium alloys

    Article • International Journal of Machine Tools and Manufacture, December 2007, Elsevier

    Professor Yoshihiko Uematsu

  88. Fracture toughness and fatigue crack propagation in cast irons with spheroidal vanadium carbides dispersed within martensitic matrix microstructure

    Article • Materials Science and Engineering A, December 2007, Elsevier

    Professor Yoshihiko Uematsu

  89. Effect of processing parameters on static strength of dissimilar friction stir spot welds between different aluminium alloys

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2007, Wiley

    Professor Yoshihiko Uematsu

  90. Effects of Humidity and Water Environment on Fatigue Crack Propagation in Magnesium Alloys

    Article • Journal of the Society of Materials Science Japan, January 2007, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  91. Fatigue Behaviour of Friction Stir Spot Welded Al-Mg-Si Alloy

    Article • Journal of the Society of Materials Science Japan, January 2007, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  92. Fatigue Behaviour of Friction Stir Welded AZ61 Magnesium Alloy

    Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2007, Japan Welding Society

    Professor Yoshihiko Uematsu

  93. Effect of extrusion conditions on grain refinement and fatigue behaviour in magnesium alloys

    Article • Materials Science and Engineering A, October 2006, Elsevier

    Professor Yoshihiko Uematsu

  94. Fatigue behaviour of cast irons with spheroidal vanadium carbides dispersed within martensitic matrix microstructure

    Article • Materials Science and Engineering A, February 2006, Elsevier

    Professor Yoshihiko Uematsu

  95. Development of Fatigue Testing System for in-situ Observation by an Atomic Force Microscope and Small Fatigue Crack Growth Behavior in α-Brass

    Article • JSME International Journal Series A, January 2006, Japan Society of Mechanical Engineers

    Professor Yoshihiko Uematsu

  96. Effect of Test Temperature on Fatigue Behaviour in AC4CH Cast Aluminium Alloy

    Article • Journal of the Society of Materials Science Japan, January 2006, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  97. Fatigue Behavior of Friction Stir Welded Joints of 6061-T6 Aluminum Alloy

    Article • Journal of the Society of Materials Science Japan, January 2006, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  98. Initiation and Growth Behavior of Small Fatigue Cracks in Ultra-fine Grained P/M Aluminum Alloy at Elevated Temperatures

    Article • Journal of the Society of Materials Science Japan, January 2006, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  99. Microstructure and Fatigue Behaviour of Mg2Si-Dispersed Magnesium Alloys Produced by Solid-State Synthesis

    Article • Journal of the Society of Materials Science Japan, January 2006, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  100. Report of ECF16

    Article • Journal of the Society of Materials Science Japan, January 2006, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  101. A Study on the Mechanism of Small Fatigue Crack Deflection Behavior in .ALPHA.-Brass by Means of In-situ Atomic Force Microscopy and Crystallographic Orientation Analysis

    Article • Journal of the Society of Materials Science Japan, January 2005, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  102. Fatigue Crack Growth Behavior in Ultra-Fine Grained P/M Aluminum Alloy under Repeated Two-Step Variable Amplitude Load Sequences

    Article • Journal of the Society of Materials Science Japan, January 2005, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  103. Atomic force microscopy of fatigue crack growth behavior in the low K region

    Article • International Journal of Fatigue, November 2004, Elsevier

    Professor Yoshihiko Uematsu

  104. Atomic force microscopy and the mechanism of fatigue crack growth

    Article • Fatigue & Fracture of Engineering Materials & Structures, December 2001, Wiley

    Professor Yoshihiko Uematsu

  105. Delamination behavior of a carbon-fiber-reinforced thermoplastic polymer at high temperatures

    Article • Composites Science and Technology, January 1995, Elsevier

    Professor Yoshihiko Uematsu

  106. Delamination Crack Growth of Unidirectional Carbon Fiber Reinforced Thermoplastic Polymer under High Temperature Fatigue.

    Article • Journal of the Society of Materials Science Japan, January 1993, Society of Materials Science, Japan

    Professor Yoshihiko Uematsu

  107. Temperature Dependence of Delamination Fracture Toughness of CF/PEEK and CF/PMR-15 Laminates.

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1993, Japan Society of Mechanical Engineers

    Professor Yoshihiko Uematsu

  108. Investigation of Fracture Mechanisms of Aramid/Epoxy Composites and Damage Estimation by Means of SAM.

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1992, Japan Society of Mechanical Engineers

    Professor Yoshihiko Uematsu

  109. Fatigue Behaviour of Pre-Strained Type 316 Stainless Steel

    Article • Springer Science + Business Media

    Professor Yoshihiko Uematsu

  110. Fatigue Behaviour of Friction Stir Welded 6061-T6 Aluminium Alloy

    Article • Springer Science + Business Media

    Professor Yoshihiko Uematsu

  111. Fatigue Crack Growth Behaviour Depending on Environment in Magnesium Alloys

    Article • Springer Science + Business Media

    Professor Yoshihiko Uematsu