All Stories

  1. Acoustic multi-layer Helmholtz resonance metamaterials with multiple adjustable absorption peaks

    Article • Applied Physics Letters, June 2021, American Institute of Physics

    Dr. Xinmin Shen

  2. An improved LuGre model for calculating static steering torque of rubber tracked chassis

    Article • Defence Technology, April 2021, Elsevier

    Dr. Xinmin Shen

  3. Synergistic modification by mercapto hyperbranched polysiloxane and functionalized graphene oxide on the surface of aramid fiber

    Article • Polymer Testing, November 2020, Elsevier

    Dr. Xinmin Shen

  4. Modeling and optimization of sound absorption coefficient of microperforated compressed porous metal panel absorber

    Article • Applied Acoustics, September 2020, Elsevier

    Dr. Xinmin Shen

  5. Analysis of Resistance Torque of Wheeled Steering Vehicle

    Article • IOP Conference Series Earth and Environmental Science, June 2020, Institute of Physics Publishing

    Dr. Xinmin Shen

  6. Analysis of Steering Performance of the Wheeled Vehicles with the Influence of Centrifugal Force

    Article • IOP Conference Series Earth and Environmental Science, June 2020, Institute of Physics Publishing

    Dr. Xinmin Shen

  7. Improving and Optimizing Sound Absorption Performance of Polyurethane Foam by Prepositive Microperforated Polymethyl Methacrylate Panel

    Article • Applied Sciences, March 2020, MDPI AG

    Dr. Xinmin Shen

  8. Power-Following Control Strategy of a Wheel-Drive Hydraulic Hybrid Vehicle

    Article • Strojniški vestnik – Journal of Mechanical Engineering, March 2020, Faculty of Mechanical Engineering

    Dr. Xinmin Shen

  9. Identification of Acoustic Characteristic Parameters and Improvement of Sound Absorption Performance for Porous Metal

    Article • Metals, March 2020, MDPI AG

    Dr. Xinmin Shen

  10. Development of thin sound absorber by parameter optimization of multilayer compressed porous metal with rear cavity

    Article • Applied Acoustics, February 2020, Elsevier

    Dr. Xinmin Shen

  11. Study on interfacial adhesion of the aramid fibers/rubber matrix by grafting mercapto hyperbranched polysiloxane

    Article • Polymer Testing, January 2020, Elsevier

    Dr. Xinmin Shen

  12. Design of Travelling-Wave Rotating Ultrasonic Motor under High Overload Environments: Impact Dynamics Simulation and Experimental Validation

    Article • Applied Sciences, December 2019, MDPI AG

    Dr. Xinmin Shen

  13. Parameter Optimization for Composite Structures of Microperforated Panel and Porous Metal for Optimal Sound Absorption Performance

    Article • Applied Sciences, November 2019, MDPI AG

    Dr. Xinmin Shen

  14. Improving Energy Recovery Rate of the Regenerative Braking System by Optimization of Influencing Factors

    Article • Applied Sciences, September 2019, MDPI AG

    Dr. Xinmin Shen

  15. Surface modification of Poly(p-phenylene terephthalamide) fibers by polydopamine-polyethyleneimine/graphene oxide multilayer films to enhance interfacial adhesion with rubber matrix

    Article • Polymer Testing, September 2019, Elsevier

    Dr. Xinmin Shen

  16. Research on the Acceleration Performance of a Wheel Drive Hydraulic Hybrid Vehicle Driven by Accumulators

    Article • IOP Conference Series Materials Science and Engineering, August 2019, Institute of Physics Publishing

    Dr. Xinmin Shen

  17. Enhancing the Interfacial Adhesion with Rubber Matrix by Grafting Polydopamine-Carbon Nanotubes onto Poly(p-phenylene terephthalamide) Fibers

    Article • Polymers, July 2019, MDPI AG

    Dr. Xinmin Shen

  18. Research on Locating Model of Electromagnetic Tracking System

    Article • July 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Xinmin Shen

  19. Optimization and Validation of Sound Absorption Performance of 10-Layer Gradient Compressed Porous Metal

    Article • Metals, May 2019, MDPI AG

    Dr. Xinmin Shen

  20. Optimization of geometric parameters of the standardized multilayer microperforated panel with finite dimension

    Article • Noise Control Engineering Journal, May 2019, Institute of Noise Control Engineering (INCE)

    Dr. Xinmin Shen

  21. Preparation and Characterization of Gradient Compressed Porous Metal for High-Efficiency and Thin-Thickness Acoustic Absorber

    Article • Materials, April 2019, MDPI AG

    Dr. Xinmin Shen

  22. Low Frequency Sound Absorption by Optimal Combination Structure of Porous Metal and Microperforated Panel

    Article • Applied Sciences, April 2019, MDPI AG

    Dr. Xinmin Shen

  23. Sound absorption performance of the acoustic absorber fabricated by compression and microperforation of the porous metal

    Article • Materials & Design, April 2019, Elsevier

    Dr. Xinmin Shen

  24. Optimal design and experimental validation of sound absorbing multilayer microperforated panel with constraint conditions

    Article • Applied Acoustics, March 2019, Elsevier

    Dr. Xinmin Shen

  25. A Novel Method for Deposition of Multi-Walled Carbon Nanotubes onto Poly(p-Phenylene Terephthalamide) Fibers to Enhance Interfacial Adhesion with Rubber Matrix

    Article • Polymers, February 2019, MDPI AG

    Dr. Xinmin Shen

  26. THEORETICAL MODELING AND EXPERIMENTAL VALIDATION OF SOUND-ABSORBING COEFFICIENT OF POROUS IRON

    Article • Journal of Porous Media, January 2019, Begell House

    Dr. Xinmin Shen

  27. Analysis of Handling Stability of Hydraulic Hybrid Vehicle based on ADAMS/Car Simulation

    Article • IOP Conference Series Earth and Environmental Science, October 2018, Institute of Physics Publishing

    Dr. Xinmin Shen

  28. Design and modeling of a walking mechanism for the self-adapting pipeline robot

    Article • IOP Conference Series Earth and Environmental Science, October 2018, Institute of Physics Publishing

    Dr. Xinmin Shen

  29. Investigation on machinability of the oxide layer in anodic oxidation of reaction-sintered silicon carbide by pure-water

    Article • IOP Conference Series Earth and Environmental Science, October 2018, Institute of Physics Publishing

    Dr. Xinmin Shen

  30. Investigation on Sound Absorbing Performance of the Polyester Fiber for Noise Reduction in Large-scale Equipment

    Article • IOP Conference Series Materials Science and Engineering, August 2018, Institute of Physics Publishing

    Dr. Xinmin Shen

  31. Influences of Compression Ratios on Sound Absorption Performance of Porous Nickel–Iron Alloy

    Article • Metals, July 2018, MDPI AG

    Dr. Xinmin Shen

  32. Comparison of sound absorbing performances of copper foam and iron foam with the same parameters

    Article • IOP Conference Series Materials Science and Engineering, January 2018, Institute of Physics Publishing

    Dr. Xinmin Shen

  33. Influences of the current density on the performances of the chrome-plated layer in deterministic electroplating repair

    Article • IOP Conference Series Materials Science and Engineering, January 2018, Institute of Physics Publishing

    Dr. Xinmin Shen

  34. Investigation on the Optimal Energy Recovery System for the Military Hybrid Vehicle Based upon the Comprehensive Evaluation Method

    Article • November 2017, Springer Science + Business Media

    Dr. Xinmin Shen

  35. Optimal Design of Experimental Platform for Electronic-Hydraulic Driving Vehicle Based on the Multi-factor Synthetic Evaluation Model

    Article • November 2017, Springer Science + Business Media

    Dr. Xinmin Shen

  36. Research on position analysis of a new partly-DOF parallel stable platform1

    Article • Journal of Intelligent & Fuzzy Systems, October 2017, IOS Press

    Dr. Xinmin Shen

  37. Geometrical and Dimensional Optimization of Sound Absorbing Porous Copper with Cavity

    Article • Materials & Design, October 2017, Elsevier

    Dr. Xinmin Shen

  38. Notice of Removal: Investigation on Sound Absorbing Performance of the Polyester Fiber for Noise Reduction in Large-Scale Equipment

    Article • August 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Xinmin Shen

  39. Investigation on Obstacle-surmounting Capacity of Biped-wheel Unmanned Platform Based on Kinematic and Kinetic Analysis

    Article • Procedia Engineering, January 2017, Elsevier

    Dr. Xinmin Shen

  40. Investigation on the formation of projections and cracks in anodic oxidation of reaction-sintered silicon carbide

    Article • IOP Conference Series Materials Science and Engineering, January 2017, Institute of Physics Publishing

    Dr. Xinmin Shen

  41. Research on optimal process parameters in thermally oxidation-assisted polishing of reaction-sintered silicon carbide

    Article • October 2016, SPIE

    Dr. Xinmin Shen

  42. Preliminary study on atmospheric-pressure plasma-based chemical dry figuring and finishing of reaction-sintered silicon carbide

    Article • Optical Engineering, October 2016, SPIE

    Dr. Xinmin Shen

  43. Comparative analysis on surface property in anodic oxidation polishing of reaction-sintered silicon carbide and single-crystal 4H silicon carbide

    Article • Applied Physics A, March 2016, Springer Science + Business Media

    Dr. Xinmin Shen

  44. Efficient processing of reaction-sintered silicon carbide by anodically oxidation-assisted polishing

    Article • Optical Engineering, October 2015, SPIE

    Dr. Xinmin Shen

  45. Mechanism analysis on finishing of reaction-sintered silicon carbide by combination of water vapor plasma oxidation and ceria slurry polishing

    Article • Optical Engineering, May 2015, SPIE

    Dr. Xinmin Shen

  46. Modeling of Operation Function of the Unmanned Excavator in the Deterministic Surfacing Process

    Article • Applied Mechanics and Materials, March 2015, Trans Tech Publications

    Dr. Xinmin Shen

  47. Development of Three-Dimensional Printing Technology Based on Deterministic Electrochemical Deposition Method

    Article • Advanced Materials Research, January 2015, Trans Tech Publications

    Dr. Xinmin Shen

  48. Modeling of Three-Dimensional Terrain Data for Intelligent Control of Unmanned Construction Machine in Deterministic Surfacing Process

    Article • Advanced Materials Research, December 2014, Trans Tech Publications

    Dr. Xinmin Shen

  49. Figuring and Finishing of Reaction-Sintered SiC by Anodic Oxidation Assisted Process

    Article • Key Engineering Materials, August 2014, Trans Tech Publications

    Dr. Xinmin Shen

  50. Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing

    Article • Optical Engineering, November 2013, SPIE

    Dr. Xinmin Shen

  51. Comparative analysis of oxidation methods of reaction-sintered silicon carbide for optimization of oxidation-assisted polishing

    Article • Optics Express, October 2013, Optical Society of America (OSA)

    Dr. Xinmin Shen

  52. Ultrasmooth reaction-sintered silicon carbide surface resulting from combination of thermal oxidation and ceria slurry polishing

    Article • Optics Express, June 2013, Optical Society of America (OSA)

    Dr. Xinmin Shen

  53. Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing

    Article • Optical Engineering, April 2013, SPIE

    Dr. Xinmin Shen

  54. Material Removal and Application by Chemical Impact Reaction in Nano-Abrasive Jet Polishing

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Dr. Xinmin Shen

  55. A Simulation Study on Figure Error Correction Using Near-Gaussian Removal Function in Numerical Controlled Local Wet Etching

    Article • Key Engineering Materials, November 2012, Trans Tech Publications

    Dr. Xinmin Shen

  56. The Improvement of Removal Function in Local Wet Etching by Using Eccentric Rotation System

    Article • Key Engineering Materials, June 2012, Trans Tech Publications

    Dr. Xinmin Shen