Contact

All Stories

  1. Autogenous and drying shrinkage of ultra-high performance concrete strengthened with ultra-high molecular weight polyethylene fibers

    Article • Journal of Building Engineering, January 2026, Elsevier

    Dr. Wai-Meng Quach

  2. Flexural performance of fiber-reinforced polymer-strengthened reinforced concrete beams in coastal environment

    Article • Construction and Building Materials, December 2025, Elsevier

    Dr. Wai-Meng Quach

  3. Investigation of a bio-gel for concrete crack repair and corrosion inhibition of steel bars

    Article • Corrosion Science, November 2025, Elsevier

    Dr. Wai-Meng Quach

  4. Evaluation of flexural performance on corrosion-damaged RC beams retrofitted with UHPFRCC under marine exposure

    Article • Engineering Structures, June 2025, Elsevier

    Dr. Wai-Meng Quach

  5. Design strength for additive manufactured 304L stainless steel stub columns – A numerical study

    Article • Journal of Building Engineering, May 2025, Elsevier

    Dr. Wai-Meng Quach

  6. Numerical modeling and design of cold-formed stainless steel elliptical hollow section beam-column members

    Article • Engineering Structures, January 2025, Elsevier

    Dr. Wai-Meng Quach

  7. Novel prefabricated FRP bar reinforced UHPC shells for column strengthening: Development and axial compression tests

    Article • Journal of Building Engineering, October 2024, Elsevier

    Dr. Wai-Meng Quach

  8. The impact of seawater ions on urea decomposition and calcium carbonate precipitation in the MICP process

    Article • Cement and Concrete Composites, September 2024, Elsevier

    Dr. Wai-Meng Quach

  9. Axial compressive behaviour of simulated corrosion-damaged RC columns retrofitted with UHPFRC jackets subjected to dry-wet cycling condition

    Article • Construction and Building Materials, April 2024, Elsevier

    Dr. Wai-Meng Quach

  10. Behavior and modeling of FRP grid‐reinforced ultra‐high‐performance concrete under uniaxial tension

    Article • Structural Concrete, February 2024, Wiley

    Dr. Wai-Meng Quach

  11. Cold-formed stainless steel elliptical hollow sections under combined biaxial bending and axial compression - Numerical modeling and design

    Article • Thin-Walled Structures, December 2023, Elsevier

    Dr. Wai-Meng Quach

  12. Behavior of 3D-printed HPC plates with FRP grid reinforcement under bending

    Article • Engineering Structures, November 2023, Elsevier

    Dr. Wai-Meng Quach

  13. Numerical Study on Residual Stresses and Plastic Strains in Cold-Formed High-Strength Steel Circular Hollow Sections

    Article • Materials, September 2023, MDPI AG

    Dr. Wai-Meng Quach

  14. Global instability of cold-formed steel elliptical hollow section members under combined compression and biaxial bending

    Article • Engineering Structures, September 2023, Elsevier

    Dr. Wai-Meng Quach

  15. Strength enhancement and stub-column behavior of cold-formed stainless steel elliptical hollow sections

    Article • Thin-Walled Structures, August 2023, Elsevier

    Dr. Wai-Meng Quach

  16. Application of microbial mineralization technology for marine concrete crack repair: A review

    Article • Journal of Building Engineering, June 2023, Elsevier

    Dr. Wai-Meng Quach

  17. Axial compressive behavior and model assessment of FRP-confined seawater sea-sand concrete-filled stainless steel tubular stub columns

    Article • Composite Structures, May 2023, Elsevier

    Dr. Wai-Meng Quach

  18. Cold-formed steel elliptical hollow section stub columns under combined compression and biaxial bending

    Article • Thin-Walled Structures, March 2023, Elsevier

    Dr. Wai-Meng Quach

  19. Experimental study on additive manufactured 304L stainless steel tubular sections: Material properties and cross-sectional behavior

    Article • Engineering Structures, December 2022, Elsevier

    Dr. Wai-Meng Quach

  20. Stress–strain model and design strength of cold-formed steel non-slender elliptical tubular stub columns

    Article • Thin-Walled Structures, December 2022, Elsevier

    Dr. Wai-Meng Quach

  21. Neutron diffraction residual stress analysis and mechanical properties of additively manufactured high strength steel hollow sections

    Article • Thin-Walled Structures, October 2022, Elsevier

    Dr. Wai-Meng Quach

  22. Compressive and transverse shear behaviour of novel FRP-UHPC hybrid bars

    Article • Composite Structures, February 2022, Elsevier

    Dr. Wai-Meng Quach

  23. Design-oriented stress-strain model for FRP-confined ultra-high performance concrete (UHPC)

    Article • Construction and Building Materials, February 2022, Elsevier

    Dr. Wai-Meng Quach

  24. Compressive behavior of FRP-confined ultra-high performance concrete (UHPC) in circular columns

    Article • Engineering Structures, December 2021, Elsevier

    Dr. Wai-Meng Quach

  25. Novel ultra-high-performance concrete composite plates reinforced with FRP grid: Development and mechanical behaviour

    Article • Composite Structures, August 2021, Elsevier

    Dr. Wai-Meng Quach

  26. Full-range stress-strain model for stainless steel alloys

    Article • Journal of Constructional Steel Research, October 2020, Elsevier

    Dr. Wai-Meng Quach

  27. Simplified models for residual stresses and equivalent plastic strains in cold-formed steel elliptical hollow sections

    Article • Thin-Walled Structures, September 2020, Elsevier

    Dr. Wai-Meng Quach

  28. High strength (~2000 MPa) or highly ductile (~11%) additively manufactured H13 by tempering at different conditions

    Article • Materials Science and Engineering A, January 2020, Elsevier

    Dr. Wai-Meng Quach

  29. Experimental and numerical investigation of concrete-filled hot-finished and cold-formed steel elliptical tubular stub columns

    Article • Thin-Walled Structures, December 2019, Elsevier

    Dr. Wai-Meng Quach

  30. Cross-section behavior of cold-formed steel elliptical hollow sections – A numerical study

    Article • Engineering Structures, December 2019, Elsevier

    Dr. Wai-Meng Quach

  31. Mechanical properties and cross-sectional behavior of additively manufactured high strength steel tubular sections

    Article • Thin-Walled Structures, November 2019, Elsevier

    Dr. Wai-Meng Quach

  32. Finite element-based method for residual stresses and plastic strains in cold-formed steel hollow sections

    Article • Engineering Structures, June 2019, Elsevier

    Dr. Wai-Meng Quach

  33. Behavior and design of cold-formed and hot-finished steel elliptical tubular stub columns

    Article • Journal of Constructional Steel Research, May 2019, Elsevier

    Dr. Wai-Meng Quach

  34. A Comprehensive Study of Steel Powders (316L, H13, P20 and 18Ni300) for Their Selective Laser Melting Additive Manufacturing

    Article • Metals, January 2019, MDPI AG

    Dr. Wai-Meng Quach

  35. Residual stresses in steel members

    Article • International Journal of Structural Integrity, February 2016, Emerald

    Dr. Wai-Meng Quach, Dr. Wai-Meng Quach

  36. Material Properties of Cold-Formed and Hot-Finished Elliptical Hollow Sections

    Article • Advances in Structural Engineering, July 2015, SAGE Publications

    Dr. Wai-Meng Quach, Dr. Wai-Meng Quach

  37. Strength and ductility of corner materials in cold-formed stainless steel sections

    Article • Thin-Walled Structures, October 2014, Elsevier

    Dr. Wai-Meng Quach

  38. Two-Stage Stress-Strain Models for Light-Gauge Steels

    Article • Advances in Structural Engineering, July 2014, SAGE Publications

    Dr. Wai-Meng Quach

  39. Stress-Strain Models for Light Gauge Steels

    Article • Procedia Engineering, January 2011, Elsevier

    Dr. Wai-Meng Quach

  40. Effect of the manufacturing process on the behaviour of press-braked thin-walled steel columns

    Article • Engineering Structures, November 2010, Elsevier

    Dr. Wai-Meng Quach

  41. Residual stresses in press-braked stainless steel sections, I: Coiling and uncoiling of sheets

    Article • Journal of Constructional Steel Research, August 2009, Elsevier

    Dr. Wai-Meng Quach

  42. Residual stresses in press-braked stainless steel sections, II: Press-braking operations

    Article • Journal of Constructional Steel Research, August 2009, Elsevier

    Dr. Wai-Meng Quach

  43. Three-Stage Full-Range Stress-Strain Model for Stainless Steels

    Article • Journal of Structural Engineering, September 2008, American Society of Civil Engineers (ASCE)

    Dr. Wai-Meng Quach

  44. Finite element predictions of residual stresses in press-braked thin-walled steel sections

    Article • Engineering Structures, September 2006, Elsevier

    Dr. Wai-Meng Quach

  45. Residual stresses in steel sheets due to coiling and uncoiling: a closed-form analytical solution

    Article • Engineering Structures, July 2004, Elsevier

    Dr. Wai-Meng Quach