All Stories

  1. Influence of Mn0.8Zn0.2Fe2O4 incorporate into a polyurethane matrix: Characterization and effect on the structural and magnetic properties
  2. Polymeric composites based on polyacrylic with polyethylene glycol and calcium chloride for atmospheric water harvesting
  3. Sustainable synthesis of Mn0.8Zn0.2Fe2O4 from waste batteries with soft magnetic properties
  4. Bio-Based Polymer Composites and Nanocomposites: A Sustainable Approach
  5. Study of the Feasibility of Using Food-Grade Lactose as a Viable and Economical Alternative for Obtaining High-Purity β-Lactose
  6. Influence of Thermal Treatment on Fracture Due to Cyclic Fatigue of Rotary Files
  7. Design, characterization, and biocompatibility of chitosan-nano-hydroxyapatite/tricalcium phosphate sponges
  8. Functionalized and crosslinked poly (vinyl alcohol)-citric acid hydrogel for arsenic (V) removal in water: Efficiency and mechanism
  9. Optimization of the mechanical behavior of ABS and PLA 3D printed using heat treatments
  10. Electrospun Coaxial Polycaprolactone/Polyvinylpyrrolidone Fibers Containing Cisplatin: A Potential Local Chemotherapy Delivery System for Cervical Cancer Treatment
  11. A sustainable waterproof temperature sensor made with single-use-packets and enhancement of its sensing performance by depositing the g-C3N4/BiOBr composite on its surface
  12. Effect of microwave polymerization on the thermomechanical and surface properties of ocular prosthetic acrylic resins
  13. Revalorization of Agave Bagasse by Alkaline Organosolv Treatment and the Effect of Delignification on Enzymatic Saccharification and Methane Production
  14. Effect of coconut fibers chemically modified with alkoxysilanes on the crystallization, thermal, and dynamic mechanical properties of poly(lactic acid) composites
  15. Kinetic study of polydopamine sphere synthesis using TRIS: relationship between synthesis conditions and final properties
  16. A biodegradable and flexible temperature sensor supported on avocado peel and its enhancement of detection by sensitizing with the La0.5Sr0.5CoO3 perovskite
  17. Coping with mass transfer constrains in dark fermentation using a two-phase partitioning bioreactor
  18. Efficient NO2 detection and the sensing mechanism of stretchable/biodegradable MWCNT based sensors decorated with CeO2 nanoparticles
  19. Thermal-structural characterization and H2 generation capability of novel CeO2/graphene catalyst
  20. Development and use of geopolymers for energy conversion: An overview
  21. Indirect sulfonation of telechelic poly(styrene-ethylene-butylene-styrene) via chloromethylation for preparation of sulfonated membranes as proton exchange membranes
  22. Structural modification of polysulfone/NMP membranes: effect of chloroform as co-solvent
  23. Synthesis of a PVA drug delivery system for controlled release of a Tramadol–Dexketoprofen combination
  24. Influence of chain length, particle size, and thermal treatment of dicarboxylic acid-functionalized titanium dioxide filler in polypropylene
  25. High sensitivity of flexible graphene composites decorated with V2O5 microbelts for NO2 detection
  26. Effect of silicon dots into coconut fibers on the nucleating capacity of β-crystals of polypropylene
  27. Thermal and mechanical properties of UHMWPE / HDPE / PCL and bioglass filler: Effect of polycaprolactone
  28. A review on hybrid and flexible CO2 gas sensors
  29. Semiconducting Nanocrystalline Bismuth Oxychloride (BiOCl) for Photocatalytic Reduction of CO2
  30. Sulfonation of a flexible and unexpected electrically conductive polysulfone and its performance in perovskites solar cells
  31. Effect of aliphatic chain in dicarboxylic acids on non-isothermal crystallization and mechanical behavior of titanium dioxide/iPP composites
  32. Chemical modification of titanium dioxide nanoparticles with dicarboxylic acids to mediate the UV degradation in polyethylene films
  33. Influence of RGD Peptide on Morphology and Biocompatibility of 3D Scaffolds Based on PLA/Hydroxyapatite
  34. Some aspects of polybenzimidazoles’ synthesis in Eaton reagent under different temperatures and microwave irradiation
  35. Modified Metallic Oxides for Efficient Photocatalysis
  36. RGD-functionalization of PLA/starch scaffolds obtained by electrospinning and evaluated in vitro for potential bone regeneration
  37. Experimental data in support of characterization of the CePO4 dispersion into transparent PMMA/PU IPNs by the sequential route
  38. Enhanced photocatalytic performance of zinc oxide nanostructures via photoirradiation hybridisation with graphene oxide for the degradation of triclosan under visible light: Synthesis, characterisation and mechanistic study
  39. A rapid method for interfacial tension calculation between rock plug and crude oil based on contact angles, application for EOR
  40. Dispersion of upconverting nanostructures of CePO4 using rod and semi-spherical morphologies into transparent PMMA/PU IPNs by the sequential route
  41. Photocatalytic properties of BiOCl-TiO2 composites for phenol photodegradation
  42. Modeling and optimization of a photocatalytic process: Degradation of endocrine disruptor compounds by Ag/ZnO
  43. Viscosity and normal stress forces of Lennard-Jones chains using reverse non-equilibrium molecular dynamics
  44. Synthesis and evaluation of compatibilizer based on interpenetrating polymer networks (IPN) for PET/LDPE blends
  45. Impact of partially cross-linked polymers on immobilization of photocatalysts
  46. Effect of Ag, pH, and time on the preparation of Ag-functionalized zinc oxide nanoagglomerates as photocatalysts
  47. Electroactive behavior assessment of poly(acrylic acid)-graphene oxide composite hydrogel in the detection of cadmium
  48. Cell viability of starch-based hydrogels for maxillofacial bone regeneration
  49. Controlled release of theophylline from poly(vinyl alcohol) hydrogels/porous silicon nanostructured systems
  50. Removal of fluoride from drinking water by a chitin-based biocomposite in fixed-bed columns
  51. Performance of innovative PU-foam and natural fiber-based composites for the biofiltration of a mixture of volatile organic compounds by a fungal biofilm
  52. Natural-Fiber-Reinforced Composite Treated with Polyamines Used as a Support for the Biodegradation and Adsorption of Toluene
  53. Synthesis and characterization of silica xerogels obtained via fast sol–gel process
  54. Batch biodegradation of hydrocarbon vapors using a modified polymeric support
  55. Synthesis of a chitin-based biocomposite for water treatment: Optimization for fluoride removal
  56. EFFECT OF FUNCTIONALIZATION ON SBR'S INTERACTION WITH CARBON BLACK AND SILICA
  57. Selective hydrogenation of butadiene–styrene copolymers using a Ziegler–Natta type catalyst 2. Thermal properties
  58. Selective hydrogenation of butadiene–styrene copolymers using a Ziegler–Natta type catalyst