All Stories

  1. Probabilistic Analysis of Orbital Characteristics of Rotary Systems with Centrally and Off-Center Mounted Unbalanced Disks
  2. Probabilistic Analysis of Critical Speed Values of a Rotating Machine as a Function of the Change of Dynamic Parameters
  3. Investigation of the Mechanical Properties of Spur Involute Gearing by Infrared Thermography
  4. The Impact of Excitation Periods on the Outcome of Lock-In Thermography
  5. Contribution to the measurement of pipeline deformation
  6. Acoustic Emission and Infrared Thermography Study of Low Strain Tensile Behaviour of AISI 304L Stainless Steel
  7. Research on the Oscillation in Centerless Grinding Technology When Machining Bearing Steel
  8. Comparison of the Optical Lock-in Thermography using the Reflection Mode and the Transmission Mode
  9. Nondestructive Evaluation of BSCC Artificial Heart Valves
  10. Detection of Elastic Deformation in Metal Materials in Infrared Spectral Range
  11. Approximate phase speed of Lamb waves in a composite plate reinforced with strong fibres
  12. Revision of Commonly Used Loop Knots Efficiencies
  13. Assessment of traffic noise for medium heavy vehicles in octave bands
  14. Dynamic modelling of elastic plates reinforced by strong fibres
  15. Influence of imperfections on dynamic properties of oscillating rod
  16. PROCESSING OF RESULTS FROM A THERMAL FEM ANALYSIS USING THE LOCK-IN METHOD AND COMPARISON WITH EXPERIMENT
  17. Frequency analysis of urban traffic noise
  18. Analysis of Urban Traffic for Various Sets of Vehicles
  19. Conversion of data from the laser scanner to the Ansys Workbench
  20. Variability analysis of urban traffic noise measurands
  21. Comparison of analytical and numerical solution of bearing contact analysis
  22. Assessment of variability of acoustic power generated by traffic volume
  23. Detection of composite damage by IR NDT using ultrasonic and optic excitation
  24. Validation of traffic noise models
  25. Vibration analysis and comparison of the damaged and undamaged rolling ball bearing
  26. SIMPLIFIED ESTIMATE OF FATIGUE DAMAGE BASED ON DYNAMIC ANALYSIS
  27. Estimation of uncertainty and variability of urban traffic volume measurements in Kielce
  28. Modelling of road traffic noise
  29. Computer simulations of thermal phenomena in surface heating process using the real distribution of Yb:YAG laser power
  30. Probability analysis of dynamical effects of axial piston hydraulic motor
  31. Analysis and synthesis parameters influencing to the effects of impact
  32. The contribution to the modal analysis using an infrared camera
  33. Fatigue limit estimation using IR camera
  34. The contribution to the modal analysis of the control system
  35. Static structural analysis of rolling ball bearing
  36. Contribution to the determination of the thermal emissivity of the composite material using longwave infrared camera
  37. Urban Noise Recorded by Stationary Monitoring Stations
  38. Analysis of bond behaviour in strengthened reinforced concrete beam with carbon fiber reinforced polymer lamella
  39. Condition Monitoring and Fault Diagnosis
  40. Detection of Natural Frequencies Using IR Camera
  41. Determination of Vibration Sources by Using STFT
  42. Measurement of Strain During Tension Test of Welded Joint Using Multi-camera 3D Correlation System
  43. Nondestructive Testing of Metal Parts by Using Infrared Camera
  44. Dynamic Analysis of Rotating Machines in MSC.ADAMS
  45. The Contribution to the Analysis of the Run Up Test
  46. Thermal-stress Analysis of Beam Loaded by 3 Point Bending
  47. Time Average Synchronization in Thermoelastic Stress Analysis
  48. Identification of Material Damping of a Carbon Composite Bar and Study of Its Effect on Attenuation of Its Transient Lateral Vibrations
  49. Analysis of the Influence of Input Function Contact Parameters of the Impact Force Process in the MSC. ADAMS
  50. Experimental Measurement of Stress Distribution
  51. Fracture Mechanics Approach for Analysis of Delamination in Composite Plates
  52. Repair of Composite Structure Using Cold Sleeve with Polymer Filling Material
  53. A Detection of Deformation Mechanisms Using Infrared Thermography and Acoustic Emission
  54. Application of Computational and Design Approaches to Improve Carrier Stability
  55. Understanding of the Dynamical Properties of Machines Based on the Interpretation of Spectral Measurements and FRF
  56. Localization Lüders Band in Infrared Spectrum
  57. Finite Element Thermo-mechanical Transient Analysis of Concrete Structure
  58. A Design and Optimization of the Fully Automatic Shunting Mechanism
  59. Contribution to Numerical Analysis of Uncertain Mechanical Systems Using Probability and Possibility Theory