All Stories

  1. Shear Behaviour of Polyurethane Screw-Glued and Serrated Steel Plate Flange-to-Web Joints in Ribbed CLT Panels

    Article • Journal of Composites Science, September 2026, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  2. Efficient Numerical Modelling Technology of Timber Post-and-Beam Frame Robustness

    Article • Buildings, June 2026, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  3. Ternary Gypsum–Cement–Pozzolanic Compositions for 3D Printing: Mix Design, Rheology and Long-Term Performance

    Article • Infrastructures, April 2026, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  4. Efficient Numerical Modelling Technology of Timber Post and Beam Frame Robustness

    Article • April 2026, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  5. Acoustic and Mechanical Performance of Treated Rubber–Concrete Composites for Soundproofing in Wind Power Applications

    Article • Journal of Composites Science, January 2026, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  6. Influence of Timber-to-Concrete Connection Types on the Behaviour of Timber–Concrete Composite Structures

    Article • Journal of Composites Science, November 2025, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  7. Development of a Mineral Binder for Wood Wool Acoustic Panels with a Reduced Carbon Footprint

    Article • Materials, November 2025, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  8. Design Methodology for Tensile Load Capacity of Rivet Nut Connections in Aluminium Alloy Profiles

    Article • Journal of Composites Science, October 2025, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  9. Behaviour Analysis of Timber–Concrete Composite Floor Structure with Granite Chip Connection

    Article • Journal of Composites Science, October 2025, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  10. Novel Pulsed Electromagnetic Field Device for Rapid Structural Health Monitoring: Enhanced Joint Integrity Assessment in Steel Structures

    Article • Materials, June 2025, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  11. A Short Review of Recent Innovations in Acoustic Materials and Panel Design: Emphasizing Wood Composites for Enhanced Performance and Sustainability

    Article • Applied Sciences, April 2025, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  12. Improving the Structural Efficiency of Punched-Metal-Material-Based Composites

    Article • Polymers, December 2024, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  13. Improving the Structural Efficiency of Punched Metal Material (PMM)-Based Composites

    Article • November 2024, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  14. Verification of a Simplified Design Method for Timber–Concrete Composite Structures with Metal Web Timber Joists

    Article • Applied Sciences, February 2024, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  15. Study of Lightweight Ceramic Matrix-Less Syntactic Foam Composed of Cenosphere Using Spark Plasma Sintering

    Article • Materials, January 2024, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  16. Study of Lightweight Ceramic Matrixless Syntactic Foam Composed of Cenospheres Using Spark Plasma Sintering

    Article • December 2023, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  17. High-Temperature, Lightweight Ceramics with Nano-Sized Ferrites for EMI Shielding: Synthesis, Characterisation, and Potential Applications

    Article • Materials, December 2023, MDPI AG

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  18. The Effect of Zinc Oxide on DLP Hybrid Composite Manufacturability and Mechanical-Chemical Resistance

    Article • Polymers, December 2023, MDPI AG

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  19. Investigation of a Shock Freezing Concept with Additional Electromagnetic Field Exposure

    Article • Advances in Science and Technology, November 2023, Trans Tech Publications

    Mr. Vjaceslavs Lapkovskis

  20. The Effect of Zinc Oxide on DLP Hybrid Composite Manufacturability and Mechanical-Chemical Resistance

    Article • November 2023, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  21. High-Temperature Lightweight Ceramics with Nano-sized Ferrites for EMI Shielding: Synthesis, Characterization, and Potential Applications

    Article • November 2023, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  22. The Quality Assessment of Timber Structural Joints Using the Coaxial Correlation Method

    Article • Buildings, July 2023, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  23. Compensation of Accuracy Error for Time Interval Measurements

    Article • March 2023, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  24. Dynamic Alloying of Steels in the Super-Deep Penetration Mode

    Article • Materials, March 2022, MDPI AG

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  25. Dynamic Alloying of Steels in the Super-Deep Penetration Mode

    Article • February 2022, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  26. Application of Granular Biocomposites Based on Homogenised Peat for Absorption of Oil Products

    Article • Materials, February 2022, MDPI AG

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  27. Application of Granular Biocomposites Based on Homogenised Peat for Absorption of Oil Products

    Article • February 2022, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  28. Effect of Ground Vulcanizate Modification Methods on Properties of Oil-Petroleum-Resistant Rubber

    Article • Key Engineering Materials, November 2021, Trans Tech Publications

    Mr. Vjaceslavs Lapkovskis

  29. Potential of Baltic Region Peat in High Added-value Products and Environmentally Friendly Applications - A Review

    Article • October 2021, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  30. Development of Electromagnetic Shielding Material Based on Devulcanised Crumb Rubber

    Article • Solid State Phenomena, June 2021, Trans Tech Publications

    Mr. Vjaceslavs Lapkovskis

  31. Towards Next-Generation Sustainable Composites Made of Recycled Rubber, Cenospheres, and Biobinder

    Article • Polymers, February 2021, MDPI AG

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  32. Towards Next Generation Sustainable Rubber Composites from Biobinder Made of Homogenised Peat

    Article • December 2020, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  33. Crumb Rubber as a Secondary Raw Material from Waste Rubber: A Short Review of End-Of-Life Mechanical Processing Methods

    Article • Recycling, December 2020, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  34. Utilisation of Bio-binder Made of Homogenised Peat in Crumb Rubber-containing Composites

    Article • November 2020, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  35. Crumb Rubber as a Secondary Raw Material from Waste Rubber: A Short Review of Processing Methods

    Article • September 2020, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  36. Vanadium sustainability in the context of innovative recycling and sourcing development

    Article • Waste Management, July 2020, Elsevier

    Mr. Vjaceslavs Lapkovskis

  37. The Critical Raw Materials in Cutting Tools for Machining Applications: A Review

    Article • Materials, March 2020, MDPI AG

    Mr. Vjaceslavs Lapkovskis

  38. Study of Devulcanised Crumb Rubber-Peat Bio-Based Composite for Environmental Applications

    Article • Key Engineering Materials, April 2019, Trans Tech Publications

    Dmitri Goljandin, Mr. Vjaceslavs Lapkovskis

  39. Investigation of Devulcanised Crumb Rubber Milling and Deagglomeration in Disintegrator System

    Article • Key Engineering Materials, April 2019, Trans Tech Publications

    Dmitri Goljandin, Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  40. Suitability of devulcanized crumb rubber for oil spills remediation

    Article • Energy Procedia, August 2018, Elsevier

    Mr. Vjaceslavs Lapkovskis

  41. Sustainability evaluation of essential critical raw materials: cobalt, niobium, tungsten and rare earth elements

    Article • Journal of Physics D Applied Physics, April 2018, Institute of Physics Publishing

    Mr. Vjaceslavs Lapkovskis

  42. SUPPLY AND SUBSTITUTION OPTIONS FOR SELECTED CRITICAL RAW MATERIALS: COBALT, NIOBIUM, TUNGSTEN, YTTRIUM AND RARE EARTHS ELEMENTS

    Article • Detritus, January 2018, Eurowaste SRL

    Mr. Vjaceslavs Lapkovskis

  43. Consolidation of metallic hollow spheres by electric sintering

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Mr. Vjaceslavs Lapkovskis

  44. Excitation of Lightweight Steel Hollow Spheres by Means of Pulsed Electromagnetic Field

    Article • Procedia Computer Science, January 2017, Elsevier

    Mr. Vjaceslavs Lapkovskis

  45. Conversion of Polymer and Perforated Metallic Residues into New Value-added Composite Building Materials

    Article • Energy Procedia, June 2015, Elsevier

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  46. Ferromagnetic Sorbents for Collection and Utilization of Oil Products

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis

  47. Application of Pulse Electromagnetic Field for Metal Coatings Manufacturing

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Mr. Vjaceslavs Lapkovskis

  48. Recycling of Al-W-B Composite Material

    Article • Key Engineering Materials, November 2012, Trans Tech Publications

    Mr Andrei Shishkin, Mr. Vjaceslavs Lapkovskis