All Stories

  1. High-power-load DCLM monochromator for a computed tomography program at BMIT at energies of 25–150 keV
  2. Food suspensions study with SR microtomography
  3. Review of Canadian Light Source facilities for biological applications
  4. Considering Photon Scattering and Harmonics for Synchrotron X-ray Radiographic Imaging of Polymer Electrolyte Membrane Fuel Cells
  5. BMIT facility at the Canadian Light Source: Advances in X-ray phase-sensitive imaging
  6. Synchrotron-radiation-based X-ray micro-computed tomography reveals dental bur debris under dental composite restorations
  7. Alignment and position visualization methods for the biomedical imaging and therapy (BMIT) MRT lift
  8. 25+2 poles, 4.3 T wiggler at BMIT – 7 years operational experience
  9. In situ liquid water visualization in polymer electrolyte membrane fuel cells with high resolution synchrotron x-ray radiography
  10. Biomedical Imaging Using Synchrotron Radiation: Experience at the Biomedical Imaging and Therapy (BMIT) Facility at the Canadian Light Source
  11. Factors influencing real time internal structural visualization and dynamic process monitoring in plants using synchrotron-based phase contrast X-ray imaging
  12. Beamlines of the biomedical imaging and therapy facility at the Canadian light source – part 3
  13. 4 Years of X-ray Imaging at 05B1-1 Beamline at BMIT
  14. Samarium Doped Borophosphate Glasses and Glass-Ceramics for X-ray Radiation Sensing
  15. Diffraction-enhanced Synchrotron Imaging of Bovine Ovaries Ex Vivo
  16. Supplemental shielding of BMIT SOE-1 at the Canadian Light Source
  17. Samarium-Doped Oxyfluoride Glass-Ceramic as a New Fast Erasable Dosimetric Detector Material for Microbeam Radiation Cancer Therapy Applications at the Canadian Synchrotron
  18. Optically erasable samarium-doped fluorophosphate glasses for high-dose measurements in microbeam radiation therapy
  19. Samarium-doped oxyfluoride borophosphate glasses for x-ray dosimetry in Microbeam Radiation Therapy
  20. Examination of the dynamic range of Sm-doped glasses for high-dose and high-resolution dosimetric applications in microbeam radiation therapy at the Canadian synchrotron
  21. Diffraction enhanced imaging computed tomography (DEI-CT) at the BMIT facility at the Canadian Light Source
  22. Human factors design for the BMIT biomedical beamlines
  23. Beamlines of the Biomedical Imaging and Therapy Facility at the Canadian Light Source - Part 2
  24. X-ray induced Sm3+ to Sm2+ conversion in fluorophosphate and fluoroaluminate glasses for the monitoring of high-doses in microbeam radiation therapy
  25. Biochemical and physiological weaknesses associated with the pathogenesis of femoral bone degeneration in broiler chickens
  26. Diffraction Enhanced X-ray Imaging of the Distal Radius: A Novel Approach for Visualization of Trabecular Bone Architecture
  27. Spatially resolved measurement of high doses in microbeam radiation therapy using samarium doped fluorophosphate glasses
  28. Set of measurements for alignment of beamline components
  29. Radiation shielding study against gas bremsstrahlung for the BMIT POE3 at the Canadian light source
  30. Valency conversion of samarium ions under high dose synchrotron generated X-ray radiation
  31. Amorphous and Polycrystalline Photoconductors for Direct Conversion Flat Panel X-Ray Image Sensors
  32. Preliminary Bone Imaging on 05B1-1 Beamline at the Canadian Light Source: Exploration of Diffraction Enhanced Imaging
  33. Bystander Effects During Synchrotron Imaging Procedures?
  34. Rare-Earth Doped Fluorochlorozirconate (Fcz) Glasses And Glass-Ceramics: Selected Thermal Properties And X-Ray Luminescence In Samarium Doped Fcz
  35. X-Ray Detection Using a Two-Transistor Active Pixel Sensor Array Coupled to an a-Se X-Ray Photoconductor
  36. Dependence of the electrical properties of stabilized a-Se on the preparation conditions and the development of a double layer X-ray detector structure
  37. Radiological considerations for POE-1 photon shutters, collimators and beam stops of the Biomedical Imaging and Therapy beamline at the Canadian Light Source
  38. Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 1
  39. Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper
  40. Monolithic versus conventional packed bed second stage regenerator evaluation in a Gifford–McMahon cryocooler
  41. Comparative evaluation of erbium and lead regenerator materials for low temperature cryocoolers
  42. Fabrication and testing on monolithic single bin bed by low temperature epoxy bonding
  43. Development, properties and applications of a photochromic adaptive filter
  44. Characterization of a Transformation Function of a Photochromic Adaptive Filter
  45. Modeling and testing of a light-induced spatial light modulator in hybrid optoelectronic systems
  46. Dynamic Range Extension of Photosensitive Device Array