All Stories

  1. Analysis of the Influence of Tool Modifications on the Single-Point Incremental Forming Process of CP-Ti Gr 2 and Ti-6Al-4V Titanium Sheets

    Article • Archives of Metallurgy and Materials, March 2026, Polish Academy of Sciences Chancellery

    Tomasz Trzepiecinski

  2. Effect of Contact Conditions on Frictional Characteristics of Low-Carbon Deep-Drawn Steel Sheets

    Article • Materials, March 2026, MDPI AG

    Tomasz Trzepiecinski

  3. Modeling the Friction Behavior of Low-Carbon Steel Sheets Using Various Machine Learning Algorithms Based on Strip Drawing Test Data

    Article • Materials, March 2026, MDPI AG

    Tomasz Trzepiecinski

  4. Scaffold-less manufacturing of inclined thin walls from M300 steel using the L-PBF method

    Article • Archives of Civil and Mechanical Engineering, March 2026, Springer Science + Business Media

    Tomasz Trzepiecinski

  5. Eco‐friendly dye removal: Optimized synthesis of a magnetic Schiff base biocomposite from peanut shell chitosan for enhanced Reactive Blue 19 adsorption

    Article • The Canadian Journal of Chemical Engineering, February 2026, Wiley

    Tomasz Trzepiecinski

  6. Friction performance of carbon fibre-reinforced epoxy composites sliding against direct metal laser sintered steel countersamples

    Article • The International Journal of Advanced Manufacturing Technology, February 2026, Springer Science + Business Media

    Tomasz Trzepiecinski

  7. PVP ‐Coated Fe 3 O 4 /Fe 2 O 3 ...

    Article • Journal of Applied Polymer Science, February 2026, Wiley

    Tomasz Trzepiecinski

  8. Effect of Post-Printing Methods on the Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy Samples Fabricated Using Laser Powder Bed Fusion

    Article • Materials, January 2026, MDPI AG

    Tomasz Trzepiecinski

  9. Influence of Twist Channel Angular Pressing Process on Microhardness and Microstructural Behavior of Explosively Welded Al/Cu Plates

    Article • Materials, January 2026, MDPI AG

    Tomasz Trzepiecinski

  10. Effect of Nano-TiO2 Addition on Some Properties of Pre-Alloyed CoCrMo Fabricated via Powder Technology

    Article • Materials, January 2026, MDPI AG

    Tomasz Trzepiecinski

  11. Effect of Strain Rate on the Formability Prediction of Cold-Rolled DX56D+Z100-M-C-O Steel Sheets

    Article • Materials, December 2025, MDPI AG

    Tomasz Trzepiecinski

  12. Sol–gel synthesized MgO nanoparticles: Versatile applications in photocatalytic dye degradation, heavy metal removal, CO 2

    Article • Environmental Progress & Sustainable Energy, December 2025, Wiley

    Tomasz Trzepiecinski

  13. Effect of Build-Up Strategy and Selective Laser Melting Process Parameters on Microstructure and Mechanical Properties of 316L Stainless Steel

    Article • Materials, December 2025, MDPI AG

    Tomasz Trzepiecinski

  14. An investigation into the microstructure of coating defects produced in a zinc melt with aluminum additives

    Article • Kovove Materialy-Metallic Materials, December 2025, Central Library of the Slovak Academy of Sciences

    Tomasz Trzepiecinski

  15. Vibration Analysis of Cantilever Beam with Free End Resting on 3D-Printed Spring and Considering the Effect of Accelerometer and Exciter Masses

    Article • Applied Sciences, November 2025, MDPI AG

    Tomasz Trzepiecinski

  16. Effects of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of Explosion-Welded Al-Cu Bimetallic Plates

    Article • Materials, November 2025, MDPI AG

    Tomasz Trzepiecinski

  17. Effect of SiO2 and MoS2 Particles as Lubricant Additives on Lubrication Performance in Sheet Metal Forming

    Article • Materials, October 2025, MDPI AG

    Tomasz Trzepiecinski

  18. Comparison of Approaches to Determining the Coefficient of Friction in Stretch-Forming Conditions

    Article • Materials, September 2025, MDPI AG

    Tomasz Trzepiecinski

  19. Effect of Process Parameters on Friction Properties of AISI 304 Steel Sheet during Strip Drawing Test

    Article • steel research international, August 2025, Wiley

    Tomasz Trzepiecinski

  20. Tribological Performance of Direct Metal Laser Sintered 20MnCr5 Tool Steel Countersamples Designed for Sheet Metal Forming Applications

    Article • Applied Sciences, August 2025, MDPI AG

    Tomasz Trzepiecinski

  21. Surface Topography-Based Classification of Coefficient of Friction in Strip-Drawing Test Using Kohonen Self-Organising Maps

    Article • Materials, July 2025, MDPI AG

    Tomasz Trzepiecinski

  22. Characterization of Hexagonal Close-Packed Zn-Cu-Ti Alloy Pyramid Drawpieces in Single-Point Incremental Sheet Forming Process

    Article • Materials, June 2025, MDPI AG

    Tomasz Trzepiecinski

  23. Study on the Choice of a Suitable Material Model for the Numerical Simulation of the Incremental Forming Process of Polymeric Materials

    Article • Applied Sciences, June 2025, MDPI AG

    Tomasz Trzepiecinski

  24. Green Synthesis of ZnO@SiO2, CuO@SiO2, and Al₂O₃@SiO2 Nanocomposites Using Calligonum comosum L. Extract: Synthesis, Characterization, Photocatalysis, and Antioxidant Applications

    Article • Applied Organometallic Chemistry, June 2025, Wiley

    Tomasz Trzepiecinski

  25. Investigating Resulting Surface Topography and Residual Stresses in Bending DC01 Sheet Under Tension Friction Test

    Article • Lubricants, June 2025, MDPI AG

    Tomasz Trzepiecinski

  26. APPLICATION OF THE TENSILE BENDING TEST TO DETERMINE THE TRIBOLOGICAL BEHAVIOR OF DC01 STEEL SHEETS

    Article • Tribologia, March 2025, Index Copernicus

    Tomasz Trzepiecinski

  27. Current Trends in Monitoring and Analysis of Tool Wear and Delamination in Wood-Based Panels Drilling

    Article • Machines, March 2025, MDPI AG

    Tomasz Trzepiecinski

  28. Bio‐Inspired Synthesis and Photocatalytic Applications of α‐Fe₂O₃@ZnO Nanobinary Using Laurus nobilis Leaf Extract: Efficient for Anionic and Cationic Dye Degradation With Reusability Studies

    Article • Applied Organometallic Chemistry, March 2025, Wiley

    Tomasz Trzepiecinski

  29. Study on Fatigue Life and Fracture Behaviour of Similar and Dissimilar Resistance Spot-Welded Joints of Titanium Grade 2 Alloy and Austenitic Stainless Steel 304

    Article • Applied Sciences, February 2025, MDPI AG

    Tomasz Trzepiecinski

  30. Influence of Heat Treatment on Properties and Microstructure of EN AW-6082 Aluminium Alloy Drawpieces After Single-Point Incremental Sheet Forming

    Article • Applied Sciences, January 2025, MDPI AG

    Tomasz Trzepiecinski

  31. Experimental Study on Mechanical Performance of Single-Side Bonded Carbon Fibre-Reinforced Plywood for Wood-Based Structures

    Article • Materials, January 2025, MDPI AG

    Tomasz Trzepiecinski

  32. Application of Artificial Intelligence Methods to Assess the Wear of Drill when Drilling CFRP/Plywood Laminates

    Article • January 2025, Springer Science + Business Media

    Tomasz Trzepiecinski

  33. Damage Identification in CFRP/plywood Laminate Drilling Based on Digital Image Processing, Artificial Neural Network and Fuzzy Modelling

    Article • January 2025, Springer Science + Business Media

    Tomasz Trzepiecinski

  34. The Effect of the Addition of Silicon Dioxide Particles on the Tribological Performance of Vegetable Oils in HCT600X+Z/145Cr46 Steel Contacts in the Deep-Drawing Process

    Article • Materials, December 2024, MDPI AG

    Tomasz Trzepiecinski

  35. Predicting the Effect of RSW Parameters on the Shear Force and Nugget Diameter of Similar and Dissimilar Joints Using Machine Learning Algorithms and Multilayer Perceptron

    Article • Materials, December 2024, MDPI AG

    Tomasz Trzepiecinski

  36. Application of Powder-Bed Fusion of Metals Using a Laser for Manufacturing of M300 Maraging Steel Tools Intended for Sheet Metal Bending

    Article • Materials, December 2024, MDPI AG

    Tomasz Trzepiecinski

  37. Effect of Alumina Proportion on the Microstructure and Technical and Mechanical Characteristics of Zirconia-Based Porous Ceramics

    Article • Journal of Composites Science, December 2024, MDPI AG

    Tomasz Trzepiecinski

  38. Analysis of Influence of Coating Type on Friction Behaviour and Surface Topography of DC04/1.0338 Steel Sheet in Bending Under Tension Friction Test

    Article • Materials, November 2024, MDPI AG

    Tomasz Trzepiecinski

  39. Numerical and Experimental Research of the Plastic Forming Process of Hastelloy X Alloy Sheets Using Elastomeric and Steel Tools

    Article • Materials, November 2024, MDPI AG

    Tomasz Trzepiecinski

  40. Application of X-Ray Computed Tomography to Identify Defects in Lost Wax Ceramic Moulds for Precision Casting of Turbine Blades

    Article • Materials, October 2024, MDPI AG

    Tomasz Trzepiecinski

  41. Application of the Gradient-Boosting with Regression Trees to Predict the Coefficient of Friction on Drawbead in Sheet Metal Forming

    Article • Materials, September 2024, MDPI AG

    Tomasz Trzepiecinski

  42. Effect of Countersample Coatings on the Friction Behaviour of DC01 Steel Sheets in Bending-under-Tension Friction Tests

    Article • Materials, July 2024, MDPI AG

    Tomasz Trzepiecinski

  43. Eco-Friendly Synthesis of Al2O3 Nanoparticles: Comprehensive Characterization Properties, Mechanics, and Photocatalytic Dye Adsorption Study

    Article • Coatings, July 2024, MDPI AG

    Tomasz Trzepiecinski

  44. Analysis of the Microstructure and Mechanical Performance of Resistance Spot-Welding of Ti6Al4V to DP600 Steel Using Copper/Gold Cold-Sprayed Interlayers

    Article • Materials, July 2024, MDPI AG

    Tomasz Trzepiecinski

  45. Thermo-Mechanical Numerical Simulation of Friction Stir Rotation-Assisted Single Point Incremental Forming of Commercially Pure Titanium Sheets

    Article • Materials, June 2024, MDPI AG

    Tomasz Trzepiecinski

  46. Advanced FEM Insights into Pressure-Assisted Warm Single-Point Incremental Forming of Ti-6Al-4V Titanium Alloy Sheet Metal

    Article • Metals, May 2024, MDPI AG

    Tomasz Trzepiecinski

  47. Improved Synthesis of Cu2O NPs and Ascorbic Acid-Modified Derivatives for Adsorption of Brilliant Cresyl Blue: Surface and Reusability Studies

    Article • Materials, May 2024, MDPI AG

    Tomasz Trzepiecinski

  48. Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

    Article • Materials, May 2024, MDPI AG

    Tomasz Trzepiecinski

  49. Experimental Analysis of Smart Drilling for the Furniture Industry in the Era of Industry 4.0

    Article • Materials, April 2024, MDPI AG

    Tomasz Trzepiecinski

  50. Applications of Incremental Sheet Forming

    Article • April 2024, Taylor & Francis

    Tomasz Trzepiecinski

  51. Analytical Approach for Forecasting the Load Capacity of the EN AW-7075-T6 Aluminum Alloy Joints Created Using RFSSW Technology

    Article • Materials, March 2024, MDPI AG

    Tomasz Trzepiecinski

  52. The Comparison of the Multi-Layer Artificial Neural Network Training Methods in Terms of the Predictive Quality of the Coefficient of Friction of 1.0338 (DC04) Steel Sheet

    Article • Materials, February 2024, MDPI AG

    Tomasz Trzepiecinski

  53. Analysis of Coefficient of Friction of Deep-Drawing-Quality Steel Sheets Using Multi-Layer Neural Networks

    Article • Lubricants, February 2024, MDPI AG

    Tomasz Trzepiecinski

  54. Current Trends in Metallic Materials for Body Panels and Structural Members Used in the Automotive Industry

    Article • Materials, January 2024, MDPI AG

    Tomasz Trzepiecinski

  55. Experimental Research and Numerical Modelling of the Cold Forming Process of the Inconel 625 Alloy Sheets Using Flexible Punch

    Article • Materials, December 2023, MDPI AG

    Tomasz Trzepiecinski

  56. Experimental Research and Numerical Modelling of the Cold Forming Process of the Inconel 625 Alloy Sheets Using Flexible Punch

    Article • November 2023, MDPI AG

    Tomasz Trzepiecinski

  57. Analysis of Surface Topography Changes during Friction Testing in Cold Metal Forming of DC03 Steel Samples

    Article • Coatings, October 2023, MDPI AG

    Tomasz Trzepiecinski

  58. Tribological Performance of Anti-Wear Coatings on Tools for Forming Aluminium Alloy Sheets Used for Producing Pull-Off Caps

    Article • Materials, September 2023, MDPI AG

    Tomasz Trzepiecinski

  59. EXPERIMENTAL DETERMINATION OF THE DRAW BEAD COEFFICIENT OF FRICTION OF CuZn SHEETS IN SHEET METAL FORMING PROCESSES

    Article • Acta Metallurgica Slovaca, September 2023, SciCell

    Tomasz Trzepiecinski

  60. An Investigation of the Sequential Micro-Laser Drilling and Conventional Re-Drilling of Angled Holes in an Inconel 625 Ni-Based Alloy

    Article • Lubricants, September 2023, MDPI AG

    Tomasz Trzepiecinski

  61. Artificial Intelligence in Predicting Mechanical Properties of Composite Materials

    Article • Journal of Composites Science, September 2023, MDPI AG

    Tomasz Trzepiecinski

  62. An Investigation into the Friction of Cold-Rolled Low-Carbon DC06 Steel Sheets in Sheet Metal Forming Using Radial Basis Function Neural Networks

    Article • Applied Sciences, August 2023, MDPI AG

    Tomasz Trzepiecinski

  63. Cold Drawing of AISI 321 Stainless Steel Thin-Walled Seamless Tubes on a Floating Plug

    Article • Materials, August 2023, MDPI AG

    Tomasz Trzepiecinski

  64. The Use of a Radial Basis Function Neural Network and Fuzzy Modelling in the Assessment of Surface Roughness in the MDF Milling Process

    Article • Materials, July 2023, MDPI AG

    Tomasz Trzepiecinski

  65. Analysis of the Frictional Performance of AW-5251 Aluminium Alloy Sheets Using the Random Forest Machine Learning Algorithm and Multilayer Perceptron

    Article • Materials, July 2023, MDPI AG

    Tomasz Trzepiecinski

  66. Approaches for Preventing Tool Wear in Sheet Metal Forming Processes

    Article • Machines, June 2023, MDPI AG

    Tomasz Trzepiecinski

  67. The effect of RFSSW parameters on load capacity of EN AW-6082-T6 aluminum alloy and AlCu bimetallic joints

    Article • The International Journal of Advanced Manufacturing Technology, May 2023, Springer Science + Business Media

    Tomasz Trzepiecinski

  68. Influence of the Duration and Temperature of the Al-Fin Process for the Cast Iron Insert on the Microstructure of the Bimetallic Joint Obtained in the Piston Casting Process

    Article • Metals, May 2023, MDPI AG

    Tomasz Trzepiecinski

  69. Improving the Surface Integrity of 316L Steel in the Context of Bioimplant Applications

    Article • Materials, April 2023, MDPI AG

    Tomasz Trzepiecinski

  70. Pressure-Assisted Lubrication of DC01 Steel Sheets to Reduce Friction in Sheet-Metal-Forming Processes

    Article • Lubricants, April 2023, MDPI AG

    Tomasz Trzepiecinski

  71. Friction Behaviour of 6082-T6 Aluminium Alloy Sheets in a Strip Draw Tribological Test

    Article • Materials, March 2023, MDPI AG

    Tomasz Trzepiecinski

  72. Microstructure and Mechanical Properties of Solid-State Rotary Friction Welded Inconel 713C and 32CrMo4 Steel Joints Used in a Turbocharger Rotor

    Article • Materials, March 2023, MDPI AG

    Tomasz Trzepiecinski

  73. Minimizing the Main Strains and Thickness Reduction in the Single Point Incremental Forming Process of Polyamide and High-Density Polyethylene Sheets

    Article • Materials, February 2023, MDPI AG

    Tomasz Trzepiecinski

  74. Application of Composite Materials for Energy Generation Devices

    Article • Journal of Composites Science, February 2023, MDPI AG

    Tomasz Trzepiecinski

  75. Using the FEM Method in the Prediction of Stress and Deformation in the Processing Zone of an Elastic/Visco-Plastic Material during Diamond Sliding Burnishing

    Article • Applied Sciences, February 2023, MDPI AG

    Tomasz Trzepiecinski

  76. Experimental Analysis of Frictional Performance of EN AW-2024-T3 Alclad Aluminium Alloy Sheet Metals in Sheet Metal Forming

    Article • Lubricants, January 2023, MDPI AG

    Tomasz Trzepiecinski

  77. Analysis of Tribological Performance of New Stamping Die Composite Inserts Using Strip Drawing Test

    Article • Advances in Mechanical and Materials Engineering, January 2023, Rzeszow University of Technology

    Tomasz Trzepiecinski

  78. Experimental study of the impact of chamfer and fillet in the frontal edge of adherends on the fatigue properties of adhesive joints subjected to peel

    Article • Technologia i Automatyzacja Montażu, January 2023, Rzeszow University of Technology

    Tomasz Trzepiecinski

  79. Effect of Step Size on the Formability of Al/Cu Bimetallic Sheets in Single Point Incremental Sheet Forming

    Article • Materials, December 2022, MDPI AG

    Tomasz Trzepiecinski

  80. Experimental Compaction of a High-Silica Sand in Quasi-Static Conditions

    Article • Materials, December 2022, MDPI AG

    Tomasz Trzepiecinski

  81. Application of Artificial Neural Networks to the Analysis of Friction Behaviour in a Drawbead Profile in Sheet Metal Forming

    Article • Materials, December 2022, MDPI AG

    Tomasz Trzepiecinski

  82. The Effect of Shot Peening on Residual Stress and Surface Roughness of AMS 5504 Stainless Steel Joints Welded Using the TIG Method

    Article • Materials, December 2022, MDPI AG

    Tomasz Trzepiecinski

  83. The Effect of the Extrusion Method on Processing and Selected Properties of Poly(3-hydroxybutyric-co-3-hydroxyvaleric Acid)-Based Biocomposites with Flax and Hemp Fibers

    Article • Polymers, December 2022, MDPI AG

    Tomasz Trzepiecinski

  84. Manufacture of Bead-Stiffened Panels Using the Single Point Incremental Sheet Forming Technique

    Article • Archives of Metallurgy and Materials, November 2022, Polish Academy of Sciences Chancellery

    Tomasz Trzepiecinski

  85. Research on Forming Parameters Optimization of Incremental Sheet Forming Processf or Commercially Pure Titanium Grade 2 Sheets

    Article • Archives of Metallurgy and Materials, November 2022, Polish Academy of Sciences Chancellery

    Tomasz Trzepiecinski

  86. Incremental Sheet Forming of Metal-Based Composites Used in Aviation and Automotive Applications

    Article • Journal of Composites Science, October 2022, MDPI AG

    Tomasz Trzepiecinski

  87. Minimizing the Forces in the Single Point Incremental Forming Process of Polymeric Materials Using Taguchi Design of Experiments and Analysis of Variance

    Article • Materials, September 2022, MDPI AG

    Tomasz Trzepiecinski

  88. The Use of Non-Edible Green Oils to Lubricate DC04 Steel Sheets in Sheet Metal Forming Process

    Article • Lubricants, August 2022, MDPI AG

    Tomasz Trzepiecinski

  89. A Comparative Study of Hardfacing Deposits Using a Modified Tribological Testing Strategy

    Article • Lubricants, August 2022, MDPI AG

    Tomasz Trzepiecinski

  90. Multi-Criteria Optimisation of Friction Stir Welding Parameters for EN AW-2024-T3 Aluminium Alloy Joints

    Article • Materials, August 2022, MDPI AG

    Tomasz Trzepiecinski

  91. Frictional Characteristics of Deep-Drawing Quality Steel Sheets in the Flat Die Strip Drawing Test

    Article • Materials, July 2022, MDPI AG

    Tomasz Trzepiecinski

  92. EXPERIMENTAL ANALYSIS OF ULTRALIGHT AIRCRAFT TYRE BEHAVIOUR UNDER AIRCRAFT LANDING PHASE

    Article • Aviation, June 2022, Vilnius Gediminas Technical University

    Tomasz Trzepiecinski

  93. Investigation of Surface Roughness in Incremental Sheet Forming of Conical Drawpieces from Pure Titanium Sheets

    Article • Materials, June 2022, MDPI AG

    Tomasz Trzepiecinski

  94. The Role of Al-10%Si Coating in the Manufacture and Use of Aluminized Open-Joint Steel Tubes

    Article • Materials, June 2022, MDPI AG

    Tomasz Trzepiecinski

  95. Three-Dimensional Smooth Particle Hydrodynamics Modeling and Experimental Analysis of the Ballistic Performance of Steel-Based FML Targets

    Article • Materials, May 2022, MDPI AG

    Tomasz Trzepiecinski

  96. Current Concepts for Cutting Metal-Based and Polymer-Based Composite Materials

    Article • Journal of Composites Science, May 2022, MDPI AG

    Tomasz Trzepiecinski

  97. Assessment of the Tribological Properties of the Steel/Polymer/Steel Sandwich Material LITECOR

    Article • Lubricants, May 2022, MDPI AG

    Tomasz Trzepiecinski

  98. Polynomial Multiple Regression Analysis of the Lubrication Effectiveness of Deep Drawing Quality Steel Sheets by Eco-Friendly Vegetable Oils

    Article • Materials, February 2022, MDPI AG

    Tomasz Trzepiecinski

  99. Static and Dynamic Properties of Al-Mg Alloys Subjected to Hydrostatic Extrusion

    Article • Materials, January 2022, MDPI AG

    Tomasz Trzepiecinski

  100. Recent Developments and Future Challenges in Incremental Sheet Forming of Aluminium and Aluminium Alloy Sheets

    Article • Metals, January 2022, MDPI AG

    Tomasz Trzepiecinski

  101. Split-Plot I-Optimal Design Optimisation of Combined Oil-Based and Friction Stir Rotation-Assisted Heating in SPIF of Ti-6Al-4V Titanium Alloy Sheet under Variable Oil Pressure

    Article • Metals, January 2022, MDPI AG

    Tomasz Trzepiecinski

  102. Load capacity of single-lap adhesive joints made of 2024-T3 aluminium alloy sheets after shot peening

    Article • The International Journal of Advanced Manufacturing Technology, January 2022, Springer Science + Business Media

    Tomasz Trzepiecinski

  103. Assessment of frictional performance of deep drawing quality steel sheets used in automotive industry

    Article • Technologia i Automatyzacja Montażu, January 2022, Rzeszow University of Technology

    Tomasz Trzepiecinski

  104. Non-Symmetrical Direct Extrusion—Analytical Modelling, Numerical Simulation and Experiment

    Article • Materials, December 2021, MDPI AG

    Tomasz Trzepiecinski

  105. Experimental and Numerical Stress State Assesment in Refill Friction Stir Spot Welding Joints

    Article • Fatigue of Aircraft Structures, December 2021, De Gruyter

    Tomasz Trzepiecinski

  106. Parametric Effects of Single Point Incremental Forming on Hardness of AA1100 Aluminium Alloy Sheets

    Article • Materials, November 2021, MDPI AG

    Tomasz Trzepiecinski

  107. Effect of Sandblasting on Static and Fatigue Strength of Flash Butt Welded 75Cr4 Bandsaw Blades

    Article • Materials, November 2021, MDPI AG

    Tomasz Trzepiecinski

  108. Single-Point Incremental Forming of Titanium and Titanium Alloy Sheets

    Article • Materials, October 2021, MDPI AG

    Tomasz Trzepiecinski

  109. Statistical Analysis and Optimisation of Data for the Design and Evaluation of the Shear Spinning Process

    Article • Materials, October 2021, MDPI AG

    Tomasz Trzepiecinski

  110. Modelling of Friction Phenomena Existed in Drawbead in Sheet Metal Forming

    Article • Materials, October 2021, MDPI AG

    Tomasz Trzepiecinski

  111. Experimental and Numerical Analysis of the Depth of the Strengthened Layer on Shafts Resulting from Roller Burnishing with Roller Braking Moment

    Article • Materials, October 2021, MDPI AG

    Tomasz Trzepiecinski

  112. Full-Field Temperature Measurement of Stainless Steel Specimens Subjected to Uniaxial Tensile Loading at Various Strain Rates

    Article • Materials, September 2021, MDPI AG

    Tomasz Trzepiecinski

  113. New Advances and Future Possibilities in Forming Technology of Hybrid Metal–Polymer Composites Used in Aerospace Applications

    Article • Journal of Composites Science, August 2021, MDPI AG

    Pr hedi BELHADJSALAH, Tomasz Trzepiecinski

  114. Emerging Trends in Single Point Incremental Sheet Forming of Lightweight Metals

    Article • Metals, July 2021, MDPI AG

    Tomasz Trzepiecinski

  115. Effect of Lubricant Type on the Friction Behaviours and Surface Topography in Metal Forming of Ti-6Al-4V Titanium Alloy Sheets

    Article • Materials, July 2021, MDPI AG

    Tomasz Trzepiecinski

  116. Central Composite Design Optimisation in Single Point Incremental Forming of Truncated Cones from Commercially Pure Titanium Grade 2 Sheet Metals

    Article • Materials, June 2021, MDPI AG

    Tomasz Trzepiecinski

  117. Investigation into the Effect of RFSSW Parameters on Tensile Shear Fracture Load of 7075-T6 Alclad Aluminium Alloy Joints

    Article • Materials, June 2021, MDPI AG

    Tomasz Trzepiecinski

  118. Modeling of Friction Phenomena of Ti-6Al-4V Sheets Based on Backward Elimination Regression and Multi-Layer Artificial Neural Networks

    Article • Materials, May 2021, MDPI AG

    Tomasz Trzepiecinski

  119. Coupled Thermomechanical Response Measurement of Deformation of Nickel-Based Superalloys Using Full-Field Digital Image Correlation and Infrared Thermography

    Article • Materials, April 2021, MDPI AG

    Tomasz Trzepiecinski

  120. Surface Finish Analysis in Single Point Incremental Sheet Forming of Rib-Stiffened 2024-T3 and 7075-T6 Alclad Aluminium Alloy Panels

    Article • Materials, March 2021, MDPI AG

    Tomasz Trzepiecinski

  121. Modelling the Influence of Slide Burnishing Parameters on the Surface Roughness of Shafts Made of 42CrMo4 Heat-Treatable Steel

    Article • Materials, March 2021, MDPI AG

    Tomasz Trzepiecinski

  122. Ultimate Load-Carrying Ability of Rib-Stiffened 2024-T3 and 7075-T6 Aluminium Alloy Panels under Axial Compression

    Article • Materials, March 2021, MDPI AG

    Tomasz Trzepiecinski

  123. Multiphysics Modeling and Numerical Simulation in Computer-Aided Manufacturing Processes

    Article • Metals, January 2021, MDPI AG

    Tomasz Trzepiecinski

  124. Modelling of the Effect of Slide Burnishing on the Surface Roughness of 42CrMo4 Steel Shafts

    Article • January 2021, Springer Science + Business Media

    Tomasz Trzepiecinski

  125. A fully coupled thermo-mechanical numerical modelling of the refill friction stir spot welding process in Alclad 7075-T6 aluminium alloy sheets

    Article • Archives of Civil and Mechanical Engineering, October 2020, Springer Science + Business Media

    Tomasz Trzepiecinski

  126. Tribological Performance of Environmentally Friendly Bio-Degradable Lubricants Based on a Combination of Boric Acid and Bio-Based Oils

    Article • Materials, September 2020, MDPI AG

    Tomasz Trzepiecinski

  127. Forming Processes of Modern Metallic Materials

    Article • Metals, July 2020, MDPI AG

    Tomasz Trzepiecinski

  128. Improving Prediction of Springback in Sheet Metal Forming Using Multilayer Perceptron-Based Genetic Algorithm

    Article • Materials, July 2020, MDPI AG

    Tomasz Trzepiecinski

  129. Strength Analysis of a Rib-Stiffened GLARE-Based Thin-Walled Structure

    Article • Materials, June 2020, MDPI AG

    Tomasz Trzepiecinski

  130. Recent Developments and Trends in Sheet Metal Forming

    Article • Metals, June 2020, MDPI AG

    Tomasz Trzepiecinski

  131. EFFECT OF THE PLASTIC STRAIN AND DRAWING QUALITY ON THE FRICTIONAL RESISTANCE OF STEEL SHEETS

    Article • Acta Metallurgica Slovaca, June 2020, SciCell

    Tomasz Trzepiecinski

  132. Fatigue Life Assessment of Refill Friction Stir Spot Welded Alclad 7075-T6 Aluminium Alloy Joints

    Article • Metals, May 2020, MDPI AG

    Tomasz Trzepiecinski

  133. Effect of Lubrication on Friction in Bending under Tension Test-Experimental and Numerical Approach

    Article • Metals, April 2020, MDPI AG

    Tomasz Trzepiecinski

  134. Residual Stresses and Surface Roughness Analysis of Truncated Cones of Steel Sheet Made by Single Point Incremental Forming

    Article • Metals, February 2020, MDPI AG

    Tomasz Trzepiecinski

  135. A 3D FEM-Based Numerical Analysis of the Sheet Metal Strip Flowing Through Drawbead Simulator

    Article • Metals, December 2019, MDPI AG

    Tomasz Trzepiecinski

  136. Recent Developments and Trends in the Friction Testing for Conventional Sheet Metal Forming and Incremental Sheet Forming

    Article • Metals, December 2019, MDPI AG

    Tomasz Trzepiecinski

  137. Effect of slide burnishing of shoulder fillets on the fatigue strength of X19NiCrMo4 steel shafts

    Article • The International Journal of Advanced Manufacturing Technology, December 2019, Springer Science + Business Media

    Tomasz Trzepiecinski

  138. A Weighting Grade-Based Optimization Method for Determining Refill Friction Stir Spot Welding Process Parameters

    Article • Journal of Materials Engineering and Performance, October 2019, Springer Science + Business Media

    Tomasz Trzepiecinski

  139. A Study of the Coefficient of Friction in Steel Sheets Forming

    Article • Metals, September 2019, MDPI AG

    Tomasz Trzepiecinski

  140. A Three-Dimensional Elastic-Plastic Contact Analysis of Vickers Indenter on a Deep Drawing Quality Steel Sheet

    Article • Materials, July 2019, MDPI AG

    Tomasz Trzepiecinski

  141. Experimental and Numerical Investigations of Thin-Walled Stringer-Stiffened Panels Welded with RFSSW Technology under Uniaxial Compression

    Article • Materials, June 2019, MDPI AG

    Tomasz Trzepiecinski

  142. Polyoptimisation of the refill friction stir spot welding parameters applied in joining 7075-T6 Alclad aluminium alloy sheets used in aircraft components

    Article • The International Journal of Advanced Manufacturing Technology, May 2019, Springer Science + Business Media

    Tomasz Trzepiecinski

  143. Analysis of the effect of structural defects on the fatigue strength of RFSSW joints using C‐scan scanning acoustic microscopy and SEM

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2019, Wiley

    Tomasz Trzepiecinski

  144. Experimental Study on Drilling MDF with Tools Coated with TiAlN and ZrN

    Article • Materials, January 2019, MDPI AG

    Tomasz Trzepiecinski

  145. Experimental Study on Drilling MDF with Tools Coated with TiAlN and ZrN

    Article • January 2019, MDPI AG

    Tomasz Trzepiecinski

  146. Application of irregular roller burnishing in the shaft straightening process - Experimental and numerical study

    Article • January 2019, American Institute of Physics

    Tomasz Trzepiecinski, Marek Kowalik

  147. Effect of temperature variation on repeatability positioning of a robot when assembling parts with cylindrical surfaces

    Article • Eksploatacja i Niezawodnosc - Maintenance and Reliability, December 2018, Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

    Tomasz Trzepiecinski

  148. Investigations of temperature-induced errors in positioning of an industrial robot arm

    Article • Journal of Mechanical Science and Technology, November 2018, Springer Science + Business Media

    Tomasz Trzepiecinski

  149. Refill friction stir spot welding of 7075-T6 aluminium alloy single-lap joints with polymer sealant interlayer

    Article • Composite Structures, October 2018, Elsevier

    Tomasz Trzepiecinski

  150. Strength properties of aluminium/glass-fiber-reinforced laminate with additional epoxy adhesive film interlayer

    Article • International Journal of Adhesion and Adhesives, October 2018, Elsevier

    Tomasz Trzepiecinski

  151. Experimental Investigations of Induction Heating in Warm Forming of Stainless Steel Sheets

    Article • Tehnicki vjesnik - Technical Gazette, September 2018, Mechanical Engineering Faculty in Slavonski Brod

    Tomasz Trzepiecinski

  152. Frictional Resistances of AMS5599 Nickel-based Alloy at High Pressure Conditions

    Article • IOP Conference Series Materials Science and Engineering, August 2018, Institute of Physics Publishing

    Tomasz Trzepiecinski

  153. Forecasting the Mountability Level of a Robotized Assembly Station

    Article • August 2018, Springer Science + Business Media

    Tomasz Trzepiecinski

  154. 3D microstructure-based modelling of the deformation behaviour of ceramic matrix composites

    Article • Journal of the European Ceramic Society, July 2018, Elsevier

    Tomasz Trzepiecinski

  155. Microstructural modelling of polycrystalline materials and multilayer actuator layers

    Article • Continuum Mechanics and Thermodynamics, June 2018, Springer Science + Business Media

    Tomasz Trzepiecinski

  156. Friction stir welding of 2024-T3 aluminium alloy sheet with sheet pre-heating

    Article • Materiali in tehnologije, June 2018, Institute of Metals and Technology

    Tomasz Trzepiecinski

  157. Assessment of the Depth of the Deformed Layer in the Roller Burnishing Process

    Article • Strength of Materials, May 2018, Springer Science + Business Media

    Tomasz Trzepiecinski

  158. MULTISCALE APPROACH FOR MODELING FRACTURE IN PIEZOELECTRIC CERAMICS

    Article • Archives of Metallurgy and Materials, March 2018, Polish Academy of Sciences Chancellery

    Tomasz Trzepiecinski

  159. Investigation of 17-4PH steel microstructure and conditions of elevated temperature forming of turbine engine strut

    Article • Journal of Materials Processing Technology, February 2018, Elsevier

    Tomasz Trzepiecinski

  160. Characterization of mechanical properties of barium titanate ceramics with different grain sizes

    Article • Materials Science-Poland, January 2018, De Gruyter

    Tomasz Trzepiecinski

  161. A method of increasing the depth of the plastically deformed layer in the roller burnishing process

    Article • January 2018, American Institute of Physics

    Tomasz Trzepiecinski

  162. Analiza numeryczna odkształceń blachy dc04 w procesie kształtowania wytłoczek osiowosymetrycznych

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2018, Rzeszow University of Technology

    Tomasz Trzepiecinski

  163. Analysis of the mechanical properties and of micrographs of refill friction stir spot welded 7075-T6 aluminium sheets

    Article • Archives of Civil and Mechanical Engineering, January 2018, Springer Science + Business Media

    Tomasz Trzepiecinski

  164. Experimental and numerical study of the effect of rolling parameters on shaft deformation during the longitudinal rolling process

    Article • January 2018, American Institute of Physics

    Tomasz Trzepiecinski

  165. Experimental evaluation of value of friction coefficient in the drawbead region

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2018, Rzeszow University of Technology

    Tomasz Trzepiecinski

  166. Fracture Prediction of Piezoelectric Ceramic by the 2-D Boundary Element Analysis

    Article • January 2018, Springer Science + Business Media

    Tomasz Trzepiecinski

  167. Possibilities of application of incremental sheet-forming technique in aircraft industry

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2018, Rzeszow University of Technology

    Tomasz Trzepiecinski

  168. Variation of surface roughness, micro-hardness and friction behaviour during sheet-metal forming

    Article • International Journal of Surface Science and Engineering, January 2018, Inderscience Publishers

    Tomasz Trzepiecinski

  169. Wpływ odkształcenia blachy stalowej na zmianę struktury geometrycznej powierzchni w warunkach kontaktu powierzchni sferycznej z powierzchnią płaską

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2018, Rzeszow University of Technology

    Tomasz Trzepiecinski

  170. Analysis of sheet surface roughness change under contact with flat and spherical indenters

    Article • Kovove Materialy-Metallic Materials, January 2018, Central Library of the Slovak Academy of Sciences

    Tomasz Trzepiecinski

  171. ANALYSIS OF CRACK INITIATION AND PROPAGATION IN A PIEZOELECTRIC CERAMIC USING THE BOUNDARY ELEMENT METHOD

    Article • Acta Metallurgica Slovaca, December 2017, SciCell

    Tomasz Trzepiecinski

  172. EXPERIMENTAL EVALUATION OF DRAW BEAD COEFFICIENT OF FRICTION

    Article • Acta Metallurgica Slovaca, December 2017, SciCell

    Tomasz Trzepiecinski

  173. QUALITY ASSURANCE OF MACHINE REPAIR IN PRODUCTION PLANTS

    Article • Acta Metallurgica Slovaca, December 2017, SciCell

    Tomasz Trzepiecinski

  174. Synthesis of Barium Titanate Piezoelectric Ceramics for Multilayer Actuators (MLAs)

    Article • Acta Mechanica et Automatica, December 2017, De Gruyter

    Tomasz Trzepiecinski, Feliks Stachowicz

  175. Experimental and numerical analysis of industrial warm forming of stainless steel sheet

    Article • Journal of Manufacturing Processes, December 2017, Elsevier

    Tomasz Trzepiecinski

  176. Stress and failure analysis of the crankshaft of diesel engine

    Article • Engineering Failure Analysis, December 2017, Elsevier

    Tomasz Trzepiecinski

  177. Effect of Activation Function and Post Synaptic Potential on Response of Artificial Neural Network to Predict Frictional Resistance of Aluminium Alloy Sheets

    Article • IOP Conference Series Materials Science and Engineering, November 2017, Institute of Physics Publishing

    Tomasz Trzepiecinski

  178. Experimental Investigation of Frictional Resistances in the Drawbead Region of the Sheet Metal Forming Processes

    Article • IOP Conference Series Materials Science and Engineering, November 2017, Institute of Physics Publishing

    Tomasz Trzepiecinski

  179. On the influence of deformation of deep drawing quality steel sheet on surface topography and friction

    Article • Tribology International, November 2017, Elsevier

    Tomasz Trzepiecinski

  180. Application of the grain boundary formulation and image processing-based algorithm in micro-mechanical analysis of piezoelectric ceramic

    Article • Mathematics and Mechanics of Solids, October 2017, SAGE Publications

    Tomasz Trzepiecinski

  181. Failure mechanisms of refill friction stir spot welded 7075-T6 aluminium alloy single-lap joints

    Article • The International Journal of Advanced Manufacturing Technology, October 2017, Springer Science + Business Media

    Tomasz Trzepiecinski

  182. Effect of Computational Parameters on Springback Prediction by Numerical Simulation

    Article • Metals, September 2017, MDPI AG

    Tomasz Trzepiecinski

  183. Influence of Heat Treatment on Content of the Carbide Phases in the Microstructure of High-Speed Steel

    Article • Archives of Foundry Engineering, September 2017, De Gruyter

    Tomasz Trzepiecinski

  184. Characterization of $${\hbox {BaTiO}_{3}}$$ BaTiO 3 ...

    Article • Bulletin of Materials Science, July 2017, Springer Science + Business Media

    Tomasz Trzepiecinski

  185. Application of BaTiO3 Perovskite Material for Piezoelectric Multilayer Actuators

    Article • July 2017, Springer Science + Business Media

    Tomasz Trzepiecinski

  186. THE INFLUENCE OF MACHINING PARAMETERS AND TOOL WEAR ON THE DELAMINATION PROCESS DURING MILLING OF MELAMINE-FACED CHIPBOARD

    Article • Drewno Prace Naukowe Doniesienia Komunikaty = Wood Research Papers Reports Announcements, June 2017, Siec Badawcza Lukasiewicz-Instytut Pojazdow Szynowych "TABOR"

    Tomasz Trzepiecinski

  187. Impact of multiwall carbon nanotubes on the fatigue strength of adhesive joints

    Article • International Journal of Adhesion and Adhesives, March 2017, Elsevier

    Tomasz Trzepiecinski

  188. Investigation of contact phenomena in turning using tools made of low-alloy high-speed steels

    Article • Tehnicki vjesnik - Technical Gazette, February 2017, Mechanical Engineering Faculty in Slavonski Brod

    Tomasz Trzepiecinski

  189. Micro-mechanical modelling of mechanical and electrical properties in homogeneous piezoelectric ceramic by using boundary integral formulations

    Article • IOP Conference Series Materials Science and Engineering, February 2017, Institute of Physics Publishing

    Tomasz Trzepiecinski

  190. Modelling of multilayer actuator layers by homogenisation technique using Digimat software

    Article • Ceramics International, February 2017, Elsevier

    Tomasz Trzepiecinski

  191. Prediction of springback in V-die air bending process by using finite element method

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Tomasz Trzepiecinski

  192. Numerical Simulation of Effect of Friction Directionality on Forming of Anisotropic Sheets

    Article • International Journal of Simulation Modelling, December 2016, DAAAM International

    Tomasz Trzepiecinski

  193. Investigating the influence of the chamfer and fillet on the high-cyclic fatigue strength of adhesive joints of steel parts

    Article • Journal of Adhesion Science and Technology, September 2016, Taylor & Francis

    Tomasz Trzepiecinski

  194. Research on Accuracy of Automatic System for Casting Measuring

    Article • Archives of Foundry Engineering, September 2016, De Gruyter

    Tomasz Trzepiecinski

  195. Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels

    Article • Strength of Materials, July 2016, Springer Science + Business Media

    Tomasz Trzepiecinski

  196. Effect of tool material on tool wear and delamination during machining of particleboard

    Article • Journal of Wood Science, April 2016, Springer Science + Business Media

    Tomasz Trzepiecinski

  197. Operational tests of wear dynamics of drills made of low-alloy high-speed HS2-5-1 steel

    Article • Eksploatacja i Niezawodnosc - Maintenance and Reliability, March 2016, Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

    Tomasz Trzepiecinski

  198. Study of Frictional Properties of AMS Nickel-Chromium Alloys

    Article • Key Engineering Materials, January 2016, Trans Tech Publications

    Tomasz Trzepiecinski

  199. Surface Layer Properties of Low-Alloy High-Speed Steel after Grinding

    Article • Acta Mechanica et Automatica, January 2016, De Gruyter

    Tomasz Trzepiecinski

  200. Formation of microcracks near surgical defect in femur: Assessment of ultimate loading conditions

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2016, Rzeszow University of Technology

    Professor Vadim V Silberschmidt, Tomasz Trzepiecinski

  201. Evaluation of friction coefficient of an auto-body steel sheet

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2016, Rzeszow University of Technology

    Tomasz Trzepiecinski

  202. ANALYSIS OF CONTACT OF A RIGID SPHERE AGAINST A DEFORMABLE FLAT

    Article • Acta Metallurgica Slovaca, December 2015, SciCell

    Tomasz Trzepiecinski

  203. Analysis of the optimal orientation of robot gripper for an improved capability assembly process

    Article • Robotics and Autonomous Systems, December 2015, Elsevier

    Tomasz Trzepiecinski

  204. Finite Element Modeling of Frictional and Material Anisotropy During Forming of Steel Cylindrical Cups

    Article • Applied Mechanics and Materials, September 2015, Trans Tech Publications

    Tomasz Trzepiecinski

  205. Optimization of Selected Parameters of Modular Assembly Robot

    Article • Applied Mechanics and Materials, September 2015, Trans Tech Publications

    Tomasz Trzepiecinski

  206. Proposal for an Experimental-Numerical Method for Friction Description in Sheet Metal Forming

    Article • Strojniški vestnik – Journal of Mechanical Engineering, June 2015, Faculty of Mechanical Engineering

    Tomasz Trzepiecinski

  207. Optimal configuration of piezoelectric sensors and actuators for active vibration control of a plate using a genetic algorithm

    Article • Acta Mechanica, June 2015, Springer Science + Business Media

    Tomasz Trzepiecinski

  208. Frictional characteristics of steel sheets used in automotive industry

    Article • International Journal of Automotive Technology, May 2015, Springer Science + Business Media

    Tomasz Trzepiecinski

  209. Aktywne tłumienie drgań płyty prostokątnej za pomocą piezoelektrycznych elementów pomiarowych oraz wykonawczych

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2015, Rzeszow University of Technology

    Tomasz Trzepiecinski

  210. Thermovisual analysis of stainless steel sheet heating

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2015, Rzeszow University of Technology

    Tomasz Trzepiecinski

  211. Multiple Regression and Neural Network Based Characterization of Friction in Sheet Metal Forming

    Article • Advanced Materials Research, October 2014, Trans Tech Publications

    Tomasz Trzepiecinski

  212. The repeatability positioning analysis of the industrial robot arm

    Article • Assembly Automation, July 2014, Emerald

    Tomasz Trzepiecinski

  213. Frictional Conditions of AA5251 Aluminium Alloy Sheets Using Drawbead Simulator Tests and Numerical Methods

    Article • Strojniški vestnik – Journal of Mechanical Engineering, January 2014, Faculty of Mechanical Engineering

    Tomasz Trzepiecinski

  214. Forming Limit Diagram of the AMS 5599 Sheet Metal

    Article • Archives of Metallurgy and Materials, December 2013, Polish Academy of Sciences Chancellery

    Tomasz Trzepiecinski

  215. Numerical and Experimental Estimation of Forces During Longitudinal Rolling Process of Shaft Formation

    Article • Arabian Journal for Science and Engineering, September 2013, Springer Science + Business Media

    Tomasz Trzepiecinski

  216. Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry

    Article • International Journal of Adhesion and Adhesives, September 2013, Elsevier

    PhD. Jacek JM MUCHA, Tomasz Trzepiecinski

  217. METHOD OF FERTILIZATION OF ENERGY WILLOW PLANTATION USING SEWAGE SLUDGE

    Article • Journal of Ecological Engineering, January 2013, Index Copernicus

    Tomasz Trzepiecinski

  218. Numerical and Experimental Study of Frictional Behavior in Bending Under Tension Test

    Article • Strojniški vestnik – Journal of Mechanical Engineering, January 2013, Faculty of Mechanical Engineering

    Tomasz Trzepiecinski

  219. Examination of the influence of pressing parameters on strength and geometry of joint between aluminum plate and sheet metal

    Article • Archives of Civil and Mechanical Engineering, September 2012, Springer Science + Business Media

    Tomasz Trzepiecinski

  220. Investigations of thickness distribution in hole expanding of thin steel sheets

    Article • Archives of Civil and Mechanical Engineering, September 2012, Springer Science + Business Media

    Tomasz Trzepiecinski

  221. Study of Material Modeling Strategies for Deformability Analysis of Rectangular Cups

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Tomasz Trzepiecinski

  222. FEM based deformability analysis of metal forming: Influence of material models and analysis approaches

    Article • January 2012, American Institute of Physics

    Tomasz Trzepiecinski

  223. Investigation of anisotropy problems in sheet metal forming using finite element method

    Article • International Journal of Material Forming, August 2010, Springer Science + Business Media

    Tomasz Trzepiecinski

  224. 3D elasto-plastic FEM analysis of the sheet drawing of anisotropic steel sheet

    Article • Archives of Civil and Mechanical Engineering, January 2010, Springer Science + Business Media

    Tomasz Trzepiecinski

  225. Warm forming of stainless steel sheet

    Article • Archives of Civil and Mechanical Engineering, January 2010, Springer Science + Business Media

    Tomasz Trzepiecinski