All Stories

  1. Stability and Thermophysical Property Enhancement of MoS2-Based Water Nanofluids Using Cationic CTAB and Anionic SLS Surfactants
  2. Towards Sustainable Scaling-Up of Nanomaterials Fabrication: Current Situation, Challenges, and Future Perspectives
  3. Towards a low-cost solid oxide electrolyte based on local mineral
  4. Building towards Supercapacitors with Safer Electrolytes and Carbon Electrodes from Natural Resources
  5. Hydrothermal carbonization vs. anaerobic digestion to valorize fruit and vegetable waste: A comparative technical and energy assessment
  6. Impact of Solar Energy Integration on the Rheological and Chemical Properties of Bitumen
  7. Nanometric MnO 2 and MnO 2 ‐Graphene Oxide Materials Enabled by a Solvent‐Assisted Synthesis and Their Application in Asymmetric Supercapacitors
  8. Chemical Production of Graphene Oxide with High Surface Energy for Supercapacitor Applications
  9. Layered double hydroxide (LDH)-based materials: A mini-review on strategies to improve the performance for photocatalytic water splitting
  10. Methodology for Efficient Bitumen Storage with Reduced Energy Consumption
  11. Circumneutral concentrated ammonium acetate solution as water-in-salt electrolyte
  12. Enhanced tribological properties of wind turbine engine oil formulated with flower-shaped MoS2 nano-additives
  13. Efficient CO 2 Capture by Ultra‐high Microporous Activated Carbon Made from Natural Coal
  14. Review on syngas production using low cost catalyst extruded as honeycomb monolith
  15. Subcritical hydrothermal synthesis of amorphous molybdenum disulfide spheres
  16. Improved tribological properties, thermal and colloidal stability of poly-α-olefins based lubricants with hydrophobic MoS2 submicron additives
  17. A high energy storage supercapacitor based on nanoporous activated carbon electrode made from Argan shells with excellent ion transport in aqueous and non-aqueous electrolytes
  18. Optimization of the Capacitance of Activated Carbon in Symmetric Capacitive Deionization System
  19. Simulation and Sensitivity Analysis of Molybdenum Disulfide Nanoparticle Production Using Aspen Plus
  20. Activated carbon with exceptionally high surface area and tailored nanoporosity obtained from natural anthracite and its use in supercapacitors
  21. Effect of morphology and hydrophobization of MoS2 microparticles on the stability of poly-α-olefins lubricants
  22. Enhanced property of thin cuprous oxide film prepared through green synthetic route
  23. CO 2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
  24. Effect of surfactant concentration on the morphology of MoxSy nanoparticles prepared by a solvothermal route
  25. Autothermal reforming of model purified biogas using an extruded honeycomb monolith: A new catalyst based on nickel incorporated illite clay promoted with MgO
  26. Enhanced Dispersibility of MoS<inf>2</inf> Nanoparticles in Poly-α-Olephines Lubricant Through Surface Modification
  27. Simulation of The Synthesis Route of MoS<inf>2</inf> at Laboratory Scale: Comparison Between Simulated and Experimental Results
  28. Study of the Wind Effect on the Quality and Lubrication System of Wind Turbines
  29. Synthesis of MoS<inf>2</inf> Nanoparticles and Improvement of Their Dispersibility and Stability in PAO Base Oils
  30. Decontamination of water polluted with pesticide using biopolymers: Adsorption of glyphosate by chitin and chitosan
  31. Development of nickel supported La and Ce-natural illite clay for autothermal dry reforming of methane: Toward a better resistance to deactivation
  32. Effect of surfactant concentration on the morphology of MoxSy nanoparticles prepared by a solvothermal route
  33. Synthesis of hard carbon from argan shells for Na-ion batteries
  34. Novel nickel promoted illite clay based catalyst for autothermal dry reforming of methane
  35. Innovative CVD synthesis of Cu2O catalysts for CO oxidation
  36. Intrinsic catalytic properties of extruded clay honeycomb monolith toward complete oxidation of air pollutants
  37. Non-Calorimetric Determination of the Adsorption Heat of Volatile Organic Compounds under Dynamic Conditions
  38. Removal of methylene blue onto mineral matrices
  39. Catalytic complete oxidation of acetylene and propene over clay versus cordierite honeycomb monoliths without and with chemical vapor deposited cobalt oxide
  40. Facile solvothermal synthesis of bimetallic CoMoS2 and NiMoS2 nanospheres
  41. Study of electrochemical alkali insertion into carbonaceous materials
  42. Comparison of synthesis routes of inorganic fullerene-like nano-additives for wind turbine lubrication: Application of Life Cycle Assessment approach
  43. Effect of electrolytes nature and concentration on the morphology and structure of MoS2 nanomaterials prepared using one-pot solvothermal method
  44. Evaluation of the potential of volatile organic compound (di-methyl benzene) removal using adsorption on natural minerals compared to commercial oxides
  45. Corrigendum to: Towards biofuel combustion with an easily extruded clay as a natural catalyst [Appl. Energy 107 (2013) 149–156]
  46. Towards biofuel combustion with an easily extruded clay as a natural catalyst
  47. Low Solvothermal Synthesis and Characterization of Hollow Nanospheres Molybdenum Sulfide
  48. Determination of the heat effects involved during toluene vapor adsorption and desorption from microporous activated carbon
  49. Determination of Adsorption Characteristics of Volatile Organic Compounds Using Gas Phase FTIR Spectroscopy Flow Analysis
  50. Easy extrusion of honeycomb-shaped monoliths using Moroccan natural clays and investigation of their dynamic adsorptive behavior towards VOCs
  51. Evaluation of the Soil Contamination of Tangier (Morocco) by the Determination of BTEX, PCBs, and PAHs
  52. Use of semipermeable membrane devices for assessment of air quality in Tangier (Morocco)
  53. Original carbon-based honeycomb monoliths as support of Cu or Mn catalysts for low-temperature SCR of NO: Effects of preparation variables
  54. A comparative study of the adsorption and desorption of o-xylene onto bentonite clay and alumina
  55. Adsorption models and heat of adsorption of adsorbed ortho di-methyl benzene species on silica by using Temperature Programmed Adsorption Equilibrium methods
  56. Determination of the Heat of Adsorption and Desorption of a Volatile Organic Compound Under Dynamic Conditions Using Fourier‐Transform Infrared Spectroscopy
  57. Physicochemical characterization and adsorptive properties of some Moroccan clay minerals extruded as lab-scale monoliths
  58. Originally prepared carbon-based honeycomb monoliths with potential application as VOCs adsorbents
  59. Etude des propriétés texturales et adsorbantes D’une diatomite marocaine: Application au traitement d’air chargé d’un polluant de type composé organique volatil
  60. FTIR determination of adsorption characteristics for volatile organic compounds removal on diatomite mineral compared to commercial silica
  61. Catalytic Reduction of NO by CO over Rhodium Catalysts
  62. Catalytic Reduction of NO by CO over Rhodium Catalysts
  63. Catalytic Reduction of NO by CO over Rhodium Catalysts
  64. Reactivity of surface species in the reduction of NOx by ethanol on Ag/Al2O3
  65. Characterization of the sites involved in the adsorption of CO on ZrO2 and ZnO/ZrO2 methanol synthesis aerogel catalysts
  66. In situ diffuse reflectance infrared Fourier transform spectroscopy study of surface species involved in NOx reduction by ethanol over alumina-supported silver catalyst
  67. Heat of Adsorption of Carbon Monoxide on a Pt/Rh/CeO2/Al2O3Three-Way Catalyst Usingin-SituInfrared Spectroscopy at High Temperatures
  68. Investigation of NO interaction on Rh/doped TiO2-based automotive catalyst using combined transient diffuse reflectance Fourier transform infrared and mass spectrometry
  69. Effects of W6+Doping of TiO2on the Reactivity of Supported Rh toward NO:  Transient FTIR and Mass Spectroscopy Studies
  70. Intermediate species on zirconia supported methanol aerogel catalysts V. Adsorption of methanol
  71. On the mechanism of the methanol synthesis involving a catalyst based on zirconia support
  72. A Transient Kinetic Study of the Co/H2 Reaction on Rh/Al2O3 Using FTIR and Mass Spectroscopy
  73. Intermediate species on zirconia supported methanol aerogel catalysts
  74. CO Chemisorption and Hydrogenation of Surface Carbon Species Formed After CO/He Reaction on Rh/MgO: A Transient Kinetic Study Using FTIR and Mass Spectroscopy
  75. Intermediate species on zirconia supported methanol aerogel catalysts
  76. In Situ Determination of Surface Carbon Species Formed on Rh/Al2O3 During CO/H2 Reaction by using Various Transient and Isotopic Methods