All Stories

  1. The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

    Article • Journal of the European Ceramic Society, December 2023, Elsevier

    Dr. Tanja Lube

  2. The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

    Article • Journal of the European Ceramic Society, February 2023, Elsevier

    Dr. Tanja Lube

  3. Stereolithography-based additive manufacturing of polymer-derived SiOC/SiC ceramic composites

    Article • Journal of the European Ceramic Society, October 2022, Elsevier

    Dr. Tanja Lube

  4. Intricacies involving the evaluation of fracture toughness obtained by the surface‐crack‐in‐flexure method

    Article • Journal of the American Ceramic Society, July 2022, Wiley

    Dr. Tanja Lube

  5. Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

    Article • Journal of the European Ceramic Society, December 2021, Elsevier

    Dr. Tanja Lube

  6. Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Article • Open Ceramics, June 2021, Elsevier

    Dr. Tanja Lube

  7. Fracture Toughness Measurement

    Article • January 2021, Elsevier

    Dr. Tanja Lube

  8. Strength of additive manufactured alumina

    Article • Journal of the European Ceramic Society, November 2020, Elsevier

    Dr. Tanja Lube

  9. Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Article • Materials, July 2020, MDPI AG

    Dr. Tanja Lube

  10. Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio

    Article • Acta Materialia, April 2020, Elsevier

    Dr. Tanja Lube

  11. Fracture Toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

    Article • IOP Conference Series Materials Science and Engineering, October 2019, Institute of Physics Publishing

    Dr. Tanja Lube

  12. Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

    Article • Materials Science Forum, July 2019, Trans Tech Publications

    Dr. Tanja Lube, Prof. Tjokorda Gde Tirta T.G.T Nindhia

  13. Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Article • International Journal of Refractory Metals and Hard Materials, April 2019, Elsevier

    Dr. Tanja Lube

  14. Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs

    Article • Journal of the European Ceramic Society, December 2018, Elsevier

    Dr. Tanja Lube

  15. Fracture toughness of silicon nitride balls via thermal shock

    Article • Journal of the European Ceramic Society, April 2018, Elsevier

    Dr. Tanja Lube

  16. Corrigendum to“surface crack in tension or in bending – A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials” [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Article • Journal of the European Ceramic Society, January 2018, Elsevier

    Dr. Tanja Lube

  17. Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Article • Journal of the European Ceramic Society, December 2017, Elsevier

    Dr. Tanja Lube

  18. Strength behaviour of etched Zerodur ®

    Article • Journal of the European Ceramic Society, November 2017, Elsevier

    Dr. Tanja Lube

  19. Chairside CAD/CAM materials. Part 2: Flexural strength testing

    Article • Dental Materials, January 2017, Elsevier

    Dr. Tanja Lube

  20. Lifetime prediction of ceramic components – A case study on hybrid rolling contact

    Article • Engineering Fracture Mechanics, January 2017, Elsevier

    Dr. Tanja Lube

  21. Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data

    Article • Journal of the European Ceramic Society, April 2016, Elsevier

    Dr. Tanja Lube

  22. Testing Methods on Ceramic Rolling Elements for Hybrid Bearings

    Article • Materials Performance and Characterization, November 2015, ASTM International

    Dr. Tanja Lube, Dr. Oskar Schoeppl

  23. A Fracture Toughness Test Using the Ball-on-Three-Balls Test

    Article • Journal of the American Ceramic Society, October 2015, Wiley

    Dr. Tanja Lube

  24. On the Development of Experimental Methods for the Determination of Fracture Mechanical Parameters of Ceramics

    Article • August 2015, Springer Science + Business Media

    Dr. Tanja Lube

  25. Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Article • Journal of the European Ceramic Society, December 2014, Elsevier

    Dr. Tanja Lube

  26. Toughness measurement on ball specimens. Part II: Experimental procedure and measurement uncertainties

    Article • Journal of the European Ceramic Society, July 2014, Elsevier

    Dr. Tanja Lube

  27. Fracture toughness testing of small ceramic discs and plates

    Article • Journal of the European Ceramic Society, June 2014, Elsevier

    Dr. Tanja Lube

  28. Determination of Strength and Fracture Toughness of Small Ceramic Discs Using the Small Punch Test and the Ball-on-three-balls Test

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr. Tanja Lube

  29. Mechanical Properties and Reliability of Advanced Ceramics

    Article • January 2014, Elsevier

    Dr. Tanja Lube

  30. Mechanical Properties of Ceramics

    Article • January 2013, Elsevier

    Dr. Tanja Lube

  31. Surface crack in tension or in bending – A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials

    Article • Journal of the European Ceramic Society, July 2012, Elsevier

    Dr. Tanja Lube

  32. Toughness measurement on ball specimens. Part I: Theoretical analysis

    Article • Journal of the European Ceramic Society, June 2012, Elsevier

    Dr. Tanja Lube

  33. A Residual Stress Intensity Factor Solution for Knoop Indentation Cracks

    Article • International Journal of Fracture, March 2012, Springer Science + Business Media

    Dr. Tanja Lube

  34. Sub-Critical Crack Growth in Alumina – a Comparison of Different Measurement and Evaluation Methods

    Article • BHM Berg- und Hüttenmännische Monatshefte, November 2011, Springer Science + Business Media

    Dr. Tanja Lube

  35. Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Article • Practical Metallography, September 2011, De Gruyter

    Dr. Tanja Lube

  36. Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Dr. Tanja Lube

  37. 25year perspectiveAspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics

    Article • Materials Science and Technology, February 2010, Taylor & Francis

    Dr. Tanja Lube

  38. Keramische Verbundwerkstoffe*

    Article • Materials Testing, February 2010, De Gruyter

    Dr. Tanja Lube

  39. Influence of an apparent r-curve on strength and fracture statistics of ceramic laminates

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), August 2009, De Gruyter

    Dr. Tanja Lube

  40. Influence of the Sample Size on the Results of B3B-Tests

    Article • Key Engineering Materials, March 2009, Trans Tech Publications

    Dr. Tanja Lube

  41. Fracture of Ceramics

    Article • Advanced Engineering Materials, April 2008, Wiley

    Dr. Tanja Lube

  42. Fracture statistics of ceramic laminates strengthened by compressive residual stresses

    Article • Journal of the European Ceramic Society, January 2008, Elsevier

    Dr. Tanja Lube

  43. Einfluss von Kontaktspannungen auf die Festigkeit im 4-Kugelversuch

    Article • Practical Metallography, January 2008, De Gruyter

    Dr. Tanja Lube

  44. Optimal strength and toughness of Al2O3–ZrO2 laminates designed with external or internal compressive layers

    Article • Journal of the European Ceramic Society, January 2008, Elsevier

    Dr. Tanja Lube

  45. Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics

    Article • Engineering Fracture Mechanics, December 2007, Elsevier

    Dr. Tanja Lube

  46. A silicon nitride reference material—A testing program of ESIS TC6

    Article • Journal of the European Ceramic Society, January 2007, Elsevier

    Dr. Tanja Lube

  47. Effective fracture toughness in Al2O3–Al2O3/ZrO2 laminates

    Article • Journal of the European Ceramic Society, January 2007, Elsevier

    Dr. Tanja Lube

  48. Elastic properties and damping behaviour of alumina–alumina/zirconia laminates

    Article • Journal of the European Ceramic Society, January 2007, Elsevier

    Dr. Tanja Lube

  49. The ball on three balls test—Strength and failure analysis of different materials

    Article • Journal of the European Ceramic Society, January 2007, Elsevier

    Dr. Tanja Lube

  50. A threshold stress intensity factor at the onset of stable crack extension of Knoop indentation cracks

    Article • Engineering Fracture Mechanics, November 2004, Elsevier

    Dr. Tanja Lube

  51. Quantitative determination of the volume fraction of intergranular amorphous phase in sintered silicon nitride

    Article • Materials Science and Engineering A, April 2004, Elsevier

    Dr. Tanja Lube

  52. Delayed failure behaviour of the ESIS silicon nitride reference material at 1200 °C in air

    Article • Materials Letters, February 2004, Elsevier

    Dr. Tanja Lube

  53. The Thermo-Mechanical Response to a General Loading Path of a Martensitically Transforming Steel

    Article • Journal of Intelligent Material Systems and Structures, December 2002, SAGE Publications

    Dr. Tanja Lube

  54. Indentation crack profiles in silicon nitride

    Article • Journal of the European Ceramic Society, February 2001, Elsevier

    Dr. Tanja Lube

  55. THE MINIATURISATION OF THE 4-POINT-BEND TEST

    Article • Fatigue & Fracture of Engineering Materials & Structures, November 1997, Wiley

    Dr. Tanja Lube

  56. Weight Function, J-Integral and Material Forces Approach to Ceramic Multilayers

    Article • Springer Science + Business Media

    Dr. Tanja Lube