All Stories

  1. An investigation of the longevity wear assessment during the utilisation of biofuel-diesel blends in a diesel engine: a case study of crude palm and crude jatropha oil
  2. A way towards zero-waste campaign and sustainability in sugar industries; filter cake valorisation as energy pellets
  3. Ultrasound intensification of two‐stage biodiesel production: optimization for palm empty fruit bunch oil as a palm oil industry by‐product
  4. Potential investigation of combined natural dye pigments extracted from ivy gourd leaves, black glutinous rice and turmeric for dye-sensitised solar cell
  5. Investigation of bi-colour natural dyes potential for dye sensitized solar cell
  6. Impact of positive and negative pressure on rice straw torrefaction: Optimization using response surface methodology
  7. Impact of alkali impregnation on physicochemical properties of macro-scale sugarcane bagasse
  8. Energy Management for an Air Conditioning System Using a Storage Device to Reduce the On-Peak Power Consumption
  9. Influence of Oil Palm Nano Filler on Interlaminar Shear and Dynamic Mechanical Properties of Flax/Epoxy-Based Hybrid Nanocomposites under Cryogenic Condition
  10. Efficiency improvement of PV module using a binary-organic eutectic phase change material in a finned container
  11. Optimization of low-temperature torrefaction for rice straw upgrading
  12. Exploration of combustion behavior in a compression ignition engine fuelled with low-viscous Pimpinella anisum and waste cooking oil biodiesel blends
  13. Review of PCM types and suggestions for an applicable cascaded PCM for passive PV module cooling under tropical climate conditions
  14. Experimental studies on photovoltaic module temperature reduction using eutectic cold phase change material
  15. Comparison of free fatty acid conversion yields for esterification assisted by single- and dual-frequency sonication
  16. Experimental Studies on PV Module Cooling With Radiation Source PCM Matrix
  17. Minimization of Losses in Solar Photovoltaic Modules by Reconfiguration under Various Patterns of Partial Shading
  18. Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration
  19. Combustion of biomass briquette fuel
  20. Computational Design of a Cyclone Furnace for Concentrated Slop Combustion: A Potential Method of Converting Waste to Energy in the Alcohol Industry
  21. An experimental investigation of concentrated slop combustion characteristics in cyclone furnace
  22. Simulation of concentrated slop combustion in cyclone furnace using Computational Fluid Dynamics (CFD)
  23. Simulation of photovoltaic module configuration for different shaded patterns
  24. Optimisation of biodiesel production from refined palm oil with heterogeneous CaO catalyst using pulse ultrasonic waves under a vacuum condition
  25. Improvements on thermal efficiency of a biomass stove for a steaming process in Thailand
  26. Combustion Characteristics and Emission of Briquette Fuel from Biomass Mixed with Glycerin
  27. Non-Linear Insulator Performance of Wind Turbine Blade Surface against Lightning Strike
  28. A Demonstrated Net Zero Energy Building in Thailand: The Way for Sustainable Development in Buildings
  29. A Study of Combustion and Environments of Biomass Briquettes from Sawdust Mixed with Glycerin
  30. Characterization and Composition of Oil Extracted from Bastard Poom Beans (Sterculia foetida L) and its Potential as a Biofuel
  31. The Production of Biodiesel From A Bastard Poom Feedstock
  32. Performance of Diesel Engine Using Diesel B3 Mixed with Crude Palm Oil
  33. Study of ratio of energy consumption and gained energy during briquetting process for glycerin-biomass briquette fuel
  34. An Investigation of the Low Performance of the First Wind Farm in Thailand: A Case of Poor Wind Turbine-Site Matching
  35. Greenhouse Gas Inventory for Energy Sector of Khon Kaen Province, Thailand
  36. A feasibility study of using carbon black as a substitute to coal in cement industry
  37. Utilization of biogas–diesel mixture as fuel in a fertilizer pelletising machine for reduction of greenhouse gas emission in small farms
  38. Electricity Generation of the Water Weighted Sun Tracking System in Sirindhorn Solar Power Plant
  39. Design of Briquettizing Machine for Biomass Briquette Fuel
  40. Biogas Production from Cassava Waste Cake in a Two-Stage Anaerobic Digestion System
  41. A comparison of the predicted and experimental heat transfer performance of a finned tube evaporator