All Stories

  1. Temperature variation of the magnetic properties of mechanochemically synthesized (Fe<sub>2</sub>O<sub>3</sub>)<sub>1−</sub><i><sub>x</sub></i>(Al<sub>2</sub>O<sub>3</sub&...
  2. Effect of Surface Functional Groups and Calcium Ion Adsorption on Formation of Polystyrene/Apatite Core–Shell Microspheres by Aqueous Solution Method
  3. Structural and Magnetic Characterization of Mechanically Alloyed (Fe2O3)1−x(Al2O3)x Solid Solutions via Pulsed Neutron Powder Diffraction
  4. Enhancement of Bioactivity of Zr-50Ti Alloys through Sulfuric Acid Treatment Followed by Modified Simulated Body Fluid Treatment
  5. Structural relaxation behavior of nano silicon-graphite composite anode after lithium-ion insertion
  6. Tracer diffusion coefficient measurements on NASICON-type Lithium-ion conductor LAGP using neutron radiography between 25 °C and 500 °C
  7. Relaxation analysis of silicon monoxide-graphite composite anode after charge–discharge cycles
  8. Development of Rapid Bioactivity-Expressed Zr-50Ti Alloys by Surface Treatment with Modified Simulated Body Fluid
  9. Structural Relaxation of Li<i><sub>x</sub></i>Ni<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> and Li<i><sub>x</sub></i>Ni<sub>0.55</s...
  10. Low-temperature heat-capacities of corundum-type structured (Fe2O3)1−x(Al2O3)x solid solutions with x = 0.25, 0.50 and 0.75
  11. Bone ingrowth into a porous structure is achieved by preceding fibrogenesis and vascularization
  12. Relaxation Analysis of Silicon Monoxide-Graphite Composite Anode
  13. Homogeneous solid-solution formation in Fe2O3–Al2O3 system observed by TEM, XAFS, and Mössbauer spectroscopy
  14. Synergistic effect of sulfonation followed by precipitation of amorphous calcium phosphate on the bone-bonding strength of carbon fiber reinforced polyetheretherketone
  15. Development of Bioactive Functional Materials by Interfacial Control Using Apatite Nuclei
  16. Tracer diffusion coefficients measurements on LaPO4-dispersed LATP by means of neutron radiography
  17. Electrochemical Properties of Cs and La Co-doped CaWO4 Oxide Ion Conductor
  18. Dependence property of isoelectric points and pH environment on enzyme immobilization on maghemite/hydroxyapatite composite particles
  19. Evaluation of calcium phosphate coating on biodegradable Mg–Al–Zn–Ca alloy formed under ordinary conditions on temperature and pressure
  20. Lead acid battery with high resistance to over‐discharge using graphite based materials as cathode current collector
  21. Improved cathode performance and relaxation properties of LiMn2O4 prepared by optimized ball-milling with single-step sintering
  22. Surface Modification of Carbon Fiber-Polyetheretherketone Composite to Impart Bioactivity by Using Apatite Nuclei
  23. TEM Observation of LaPO4-Dispersed LATP Lithium-Ion Conductor
  24. Synthesis and Characterization of Lithium-Ion Conductive LATP-LaPO4 Composites Using La2O3 Nano-Powder
  25. Synthesis and Characterization of LAGP-Based Lithium Ion-Conductive Composites with an LLTO Additive
  26. Relaxation Analysis of LixNi0.8Co0.1Mn0.1O2 after Lithium Extraction to High-Voltage Region (x ≤ 0.12)
  27. Relaxation analysis of NCAs in high-voltage region and effect of cobalt content
  28. Immobilization and collection of enzymes by hydroxyapatite/maghemite composite particles with magnetism
  29. Low temperature phase transition phenomena in Ba- and Pb-substituted La2Mo2O9 oxide ion conductors
  30. Relaxation Analysis of Graphite Anode Materials after Charge-Discharge Cycles
  31. Impartation of apatite-forming ability to chitosan nanofibres by using apatite nuclei
  32. Improvement of hydroxyapatite formation ability of titanium-based alloys by combination of acid etching and apatite nuclei precipitation
  33. Development of bioactive zirconium–tin alloy by combination of micropores formation and apatite nuclei deposition
  34. Role of Magnesium and the Effect of Surface Roughness on the Hydroxyapatite-Forming Ability of Zirconia Induced by Biomimetic Aqueous Solution Treatment
  35. Relaxation stage analysis of lithium inserted graphite
  36. Impartation of Hydroxyapatite Formation Ability to Ultra-high Molecular Weight Polyethylene by Deposition of Apatite Nuclei
  37. Materials Design for Bioactive Function by Surface Modification with Apatite Nuclei
  38. Development of Apatite Nuclei Precipitated Carbon Nanotube-Polyether Ether Ketone Composite with Biological and Electrical Properties
  39. A COMPARITIVE IN VITRO BIOACTIVY EVALUATION OF POLYVINYLIDENE FLUORIDE AND POLYCAPROLACTONE INCORPORATED WITH AMORPHOUS CALCIUM PHOSPHATE PARTICLES
  40. Development of Bioactive Apatite Nuclei-Precipitated Ti-12Ta-9Nb-6Zr-3V-O Alloy
  41. Effect of Apatite Nuclei on Apatite-Forming Ability of Cellulose Nanofiber
  42. Fabrication of Bioactive Zirconia by Doubled Sandblasting Process and Incorporation of Apatite Nuclei
  43. Formation and Phase Transition of Crystalline Calcium Phosphate on Bioabsorbable Magnesium Alloy under Alkali Condition
  44. Fabrication of bioactive titanium and its alloys by combination of doubled sandblasting process and alkaline simulated body fluid treatment
  45. In vivo and in vitro bioactivity of a “precursor of apatite” treatment on polyetheretherketone
  46. Chemical transformation of PbO2 due to local cell reaction on the cathode of lead acid battery
  47. Effect of local cell reaction at cathode on the performance of nickel metal-hydride battery
  48. Structural Relaxation of LixNi0.874Co0.090Al0.036O2 after Lithium Extraction down to (x ≤ 0.12)
  49. Effect of Crystalline Calcium Phosphate Coatings Prepared in an Aqueous Solution on Corrosion Resistance of Bioabsorbable Magnesium Alloy
  50. Apatite-Forming Ability of Hydrophobicized Cellulose Nanofiber Imparted by Combination with Apatite Nuclei
  51. Bioactivity Assessment of Apatite Nuclei-PVDF Composite Thin Films
  52. Changes in Surface Condition during Fabrication Process of Bioactive Apatite Nuclei Incorporated PEEK
  53. Enzyme Immobilization Behavior on the Surface of Hydroxyapatite Capsules under Alkaline Condition
  54. Fabrication of Bioactive Polycaprolactone by Incorporation of Apatite Nuclei
  55. Biomimetic Porous Bone-Like Apatite Coatings on Metals, Organic Polymers and Microparticles
  56. Effect of Doubled Sandblasting Process and Basic Simulated Body Fluid Treatment on Fabrication of Bioactive Stainless Steels
  57. Structural Relaxation of Lix(Ni0.874Co0.090Al0.036)O2 after Lithium Extraction down to x = 0.12
  58. Defect Structure and Oxide Ion Conduction of Potassium Ion Substituted CaWO4
  59. Bioactivity Treatment to Polylactic Acid Fabric Cloth and Foam by Precipitation of Apatite Nuclei
  60. Biomimetic Method for Production of Magnetic Hydroxyapatite Microcapsules for Enzyme Immobilization
  61. Effective Procedure of Bioactivity Treatment to Bearing Grade PEEK by Incorporation of Apatite Nuclei
  62. Fabrication of Bioactive Co-Cr-Mo-W Alloy by Using Doubled Sandblasting Process and Apatite Nuclei Treatment
  63. Bioactivity Treatment for Co-Cr-Mo Alloy by Precipitation of Low Crystalline Calcium Phosphate Using Simulated Body Fluid with Alkalinized Condition
  64. Effect of Oxygen Plasma Treatment on Fabrication of Bioactive Ultrahigh Molecular Weight Polyethylene Composite
  65. Effect of pores formation process and oxygen plasma treatment to hydroxyapatite formation on bioactive PEEK prepared by incorporation of precursor of apatite
  66. Synthesis and anode properties of corundum-type structured (Fe 2 O 3 ) 1-x (Al 2 O 3 ) x solid solutions in the whole compositional range
  67. Development of Bioactive Ti-15Mo-5Zr-3Al Alloy by Incorporation of Apatite Nuclei
  68. Fabrication of Levothyroxine Particles Encapsulated with Apatite
  69. Biomimetic Crystalline Calcium Phosphate Coatings on Bioabsorbable Magnesium Alloy
  70. Effect of Isoelectric Point on Enzyme Immobilization Property of Magnetic Apatite Microcapsules Encapsulating Maghemite
  71. Apatite Formation Ability of Bioactive Bearing Grade Polyetheretherketone Fabricated by Incorporation of Apatite Nuclei
  72. Fabrication of Bioactive Fiber-reinforced PEEK and MXD6 by Incorporation of Precursor of Apatite
  73. Relaxation Analysis of LixNiO2and Lix(NCA)O2in the Deeply Lithium Extracted Region (x ≤ 0.12)
  74. Fabrication of Bioactive Fiber Reinforced Polyetheretherketone by the Function of Apatite Nuclei
  75. Fabrication of Bioactive Glass Fiber Reinforced Polyamide with High Mechanical Performance by the Function of Apatite Nuclei
  76. Fabrication of Bioactive Cobalt-Chromium Alloys by Incorporation of Apatite Nuclei
  77. Fabrication of Hydroxyapatite Microcapsules for Controlled Release of Hydrophobic Drug
  78. Bioactivity Treatments for Zirconium and Ti-6Al-4V Alloy by the Function of Apatite Nuclei
  79. Development of Bioactive PEEK by the Function of Apatite Nuclei
  80. Fabrication of Bioactive Stainless Steel by the Function of Apatite Nuclei
  81. Fabrication of Bone-Like Apatite-Phosphatidylcholine Composite Thin Film by Biomimetic Method
  82. Enzyme Immobilization by Using Apatite Microcapsules with Magnetic Properties
  83. Preparation of bioactive polymeric implant materials by the function of apatite nuclei
  84. EFFECTS OF SANDBLASTING CONDITIONS IN PREPARATION OF BIOACTIVE STAINLESS STEELS BY THE FUNCTION OF APATITE NUCLEI
  85. Electrochemical properties of Cs-substituted CaWO4 and BaWO4 oxide ion conductors
  86. INVESTIGATION OF EFFECTIVE PROCEDURES IN FABRICATION OF BIOACTIVE PEEK USING THE FUNCTION OF APATITE NUCLEI
  87. Relaxation Analysis of LiNi0.5Mn1.5O4 5 V Cathode Material by Means of the Rietveld Refinement
  88. Synthesis and Electrochemical Properties of LATP-LLTO Lithium Ion Conductive Composites
  89. THE EFFECTS OF SBF CONDITIONS ON ENCAPSULATION OF AGAROSE GEL WITH HYDROXYAPATITE MICROCAPSULES
  90. α-PbO2Formation on the Cathode of Lead Acid Battery due to the Local Cell Reaction
  91. Fabrication of Bioactive Polylactic Acid Composite Formed by 3D Printer
  92. Fabrication of Bioactive Apatite Nuclei Precipitated Ti-15Mo-5Zr-3Al Alloy by Using Doubled Sandblasting Process
  93. Fabrication of Hydroxyapatite Microcapsule Containing Vitamin B12 for Sustained-Release
  94. Fabrication of Magnetic Hydroxyapatite Microcapsule for Protein Collection
  95. Fabrication of Bioactive Apatite Nuclei Precipitated Polylactic Acid by Using Sandblasting Process
  96. Fabrication of Bioactive Apatite Nuclei-Precipitated Titanium Alloys by Using Sandblasting
  97. Fabrication of Bioactive Apatite Nuclei-Precipitated Composites
  98. Preparation of Encapsulated Magnetite Microparticles with Hydroxyapatite
  99. Biomimetic Fabrication of Hydroxyapatite Microcapsules by Using Apatite Nuclei
  100. Fabrication of Bioactive Apatite Nuclei Precipitated Titanium by Using Electromagnetic Induction Heating
  101. Development of novel bioactive composites by electrophoretic deposition
  102. Fabrication of Encapsulated Silicagel Microsphere with Hydroxyapatite for Sustained-Release
  103. Fabrication of Bioactive Organic Polymer by Using Apatite Nuclei-Contained Inorganic Binder
  104. Development of Bioactive Titanium-Apatite Nuclei Composite
  105. Fabrication of Encapsulated Ag Microsphere with Hydroxyapatite for Sustained-Release
  106. Generation of hydroxyapatite patterns by electrophoretic deposition
  107. Formation of Apatite Pattern by Electrophoretic Deposition of Apatite Nuclei
  108. Development of Bioactive Polyethylene-Apatite Nuclei Composite
  109. Apatite Pattern Formation by Electrophoretic Deposition Transcribing Resist Pattern
  110. Development of Bioactive Organic Polymer Composite by Electrophoretic Deposition