Contact

All Stories

  1. Durability of partially cured GFRP reinforcing bars in alkaline environments with or without sustained tensile load

    Article • Construction and Building Materials, September 2024, Elsevier

    Dr Sylvain Chataigner

  2. RFID Autonomous Sensors for Monitoring Corrosion on Prestressed Concrete Bridges

    Article • April 2024, MDPI AG

    Dr Sylvain Chataigner

  3. Assessment of the rotational stiffness of single-riveted joints in a steel lattice girder by modal analysis

    Article • Engineering Structures, January 2024, Elsevier

    Dr Sylvain Chataigner

  4. Defects Detection and Identification in Adhesively Bonded Joints between CFRP Laminate and Reinforced Concrete Beam Using Acousto-Ultrasonic Technique

    Article • Journal of Composites Science, November 2022, MDPI AG

    Dr Sylvain Chataigner

  5. Numerical Voids Detection in Bonded Metal/Composite Assemblies Using Acousto-Ultrasonic Method

    Article • Applied Sciences, April 2022, MDPI AG

    Dr Sylvain Chataigner

  6. Assessment of Steel-Composite and Concrete-Composite Adhesively Bonded Joints by Acousto-Ultrasonic Technique

    Article • November 2021, Springer Science + Business Media

    Dr Sylvain Chataigner

  7. Determination of Creep Behaviour of Adhesively Bonded Assembly – Application to Adhesively Bonded Steel Fasteners

    Article • November 2021, Springer Science + Business Media

    Dr Sylvain Chataigner

  8. Use of Distributed Optical Fibre to Monitor the Crack Propagation of an Adhesively Bonded Joint During an ENF Test

    Article • November 2021, Springer Science + Business Media

    Dr Sylvain Chataigner

  9. Accelerated Aging Behavior in Alkaline Environments of GFRP Reinforcing Bars and Their Bond with Concrete

    Article • Materials, September 2021, MDPI AG

    Dr Sylvain Chataigner

  10. Stress Intensity Factor Assessment for the Reinforcement of Cracked Steel Plates Using Prestressed or Non-Prestressed Adhesively Bonded CFRP

    Article • Materials, March 2021, MDPI AG

    Dr Sylvain Chataigner

  11. Fatigue Strengthening of Steel Bridges with Adhesively Bonded CFRP Laminates: Case Study

    Article • Journal of Composites for Construction, June 2020, American Society of Civil Engineers (ASCE)

    Dr Sylvain Chataigner

  12. Analytical and numerical modeling of the bond behavior between FRP reinforcing bars and concrete

    Article • Construction and Building Materials, January 2020, Elsevier

    Dr Sylvain Chataigner

  13. Creep investigations on adhesively bonded fasteners developed for offshore steel structures

    Article • Marine Structures, January 2020, Elsevier

    Dr Sylvain Chataigner

  14. Fatigue strengthening of steel structures using high modulus CFRP plates: Development of a life-cycle analysis approach

    Article • Construction and Building Materials, December 2019, Elsevier

    Dr Sylvain Chataigner

  15. Development of a sensor for monitoring mechanically stressed adhesive joints

    Article • Construction and Building Materials, December 2019, Elsevier

    Dr Sylvain Chataigner

  16. Design and testing of an adhesively bonded CFRP strengthening system for steel structures

    Article • Engineering Structures, December 2018, Elsevier

    Dr Sylvain Chataigner

  17. Experimental investigations on the bond behavior between concrete and FRP reinforcing bars

    Article • Construction and Building Materials, June 2018, Elsevier

    Dr Sylvain Chataigner

  18. Fatigue strengthening of cracked steel plates with CFRP laminates in the case of old steel material

    Article • Construction and Building Materials, June 2018, Elsevier

    Dr Sylvain Chataigner

  19. Incremental modeling of relaxation of prestressing wires under variable loading and temperature

    Article • Construction and Building Materials, February 2018, Elsevier

    Dr Sylvain Chataigner

  20. Acoustic monitoring of a prestressed concrete beam reinforced by adhesively bonded composite

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr Sylvain Chataigner

  21. Parametric study of the finite element modeling of shot peening on welded joints

    Article • Journal of Constructional Steel Research, March 2017, Elsevier

    Dr Sylvain Chataigner

  22. Influence of low elevated temperature on the mechanical behavior of steel rebars and prestressing wires in nuclear containment structures

    Article • Construction and Building Materials, March 2017, Elsevier

    Dr Sylvain Chataigner

  23. Numerical and experimental investigations of hot driven riveting process on old metal structures

    Article • Engineering Structures, November 2016, Elsevier

    Dr Sylvain Chataigner

  24. Experimental Investigations on the Influence of Temperature on the Behavior of Steel Reinforcement (Strands and Rebars)

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    Dr Sylvain Chataigner

  25. Experimental Investigation and Modeling of the Bond between Aramid Fiber-reinforced Polymer Bars and Concrete

    Article • June 2016, Wiley

    Dr Sylvain Chataigner

  26. Reinforcement of a Cracked Steel Plate Using CFRP Bonding

    Article • January 2016, Springer Science + Business Media

    Dr Sylvain Chataigner

  27. Instrumentation of Large Scale Direct Shear Test to Study the Progressive Failure of Concrete/Rock Interface

    Article • January 2016, Springer Science + Business Media

    Dr Sylvain Chataigner

  28. Une approche de type plaque layer-wise pour la modélisation de joint de colle élastoplastique

    Article • Revue des composites et des matériaux avancés, December 2014, Lavoisier

    Dr Sylvain Chataigner

  29. Temperature influence on electromagnetic measurements of concrete moisture

    Article • European Journal of Environmental and Civil engineering, October 2014, Taylor & Francis

    Dr Sylvain Chataigner

  30. Analysis of the behaviour of a bonded joint between laminated wood and ultra high performance fibre reinforced concrete using push-out test

    Article • Construction and Building Materials, February 2014, Elsevier

    Dr Sylvain Chataigner

  31. Durability of FRP Strengthened Concrete Specimens under Accelerated Ageing

    Article • March 2013, Wiley

    Dr Sylvain Chataigner

  32. Flambement d’un panneau composite auto-raidi réalisé par infusion de résine. Etude numérique et expérimentale

    Article • Revue des composites et des matériaux avancés, December 2012, Lavoisier

    Dr Sylvain Chataigner

  33. Caractérisation mécanique de l’interface collée béton/renfort composite par essai de cisaillement

    Article • Revue des composites et des matériaux avancés, August 2012, Lavoisier

    Dr Sylvain Chataigner

  34. Conception d’un ancrage par collage optimisé. Utilisation de la dépendance du comportement de l'adhésif vis-à-vis de la pression hydrostatique

    Article • Revue des composites et des matériaux avancés, August 2012, Lavoisier

    Dr Sylvain Chataigner

  35. Analysis of the nonlinear creep behavior of concrete/FRP-bonded assemblies

    Article • Journal of Adhesion Science and Technology, August 2012, Taylor & Francis

    Dr Sylvain Chataigner

  36. Enhanced layerwise model for laminates with imperfect interfaces – Part 1: Equations and theoretical validation

    Article • Composite Structures, April 2012, Elsevier

    Dr Sylvain Chataigner

  37. Enhanced layerwise model for laminates with imperfect interfaces – Part 2: Experimental validation and failure prediction

    Article • Composite Structures, February 2012, Elsevier

    Dr Sylvain Chataigner

  38. Force Transfer Using Structural Adhesive Bonding Between Timber and UHPFRC – A Push-Out Test to Choose the Adhesive

    Article • January 2012, Research Publishing Services

    Dr Sylvain Chataigner

  39. A layerwise finite element for multilayers with imperfect interfaces

    Article • Composite Structures, November 2011, Elsevier

    Dr Sylvain Chataigner

  40. Optimisation of the shear stress transfer in structural bonded assemblies using a curved bonded joint geometry

    Article • Construction and Building Materials, February 2011, Elsevier

    Dr Sylvain Chataigner

  41. Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays

    Article • Construction and Building Materials, February 2011, Elsevier

    Dr Sylvain Chataigner

  42. Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint

    Article • Construction and Building Materials, February 2011, Elsevier

    Dr Sylvain Chataigner

  43. Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces

    Article • Construction and Building Materials, February 2011, Elsevier

    Dr Sylvain Chataigner

  44. Non-linear failure criteria for a double lap bonded joint

    Article • International Journal of Adhesion and Adhesives, January 2010, Elsevier

    Dr Sylvain Chataigner

  45. Characterization of FRP-to-concrete bonded interface Description of the single lap shear test

    Article • Revue européenne de génie civil, November 2009, Lavoisier

    Dr Sylvain Chataigner

  46. Characterization of FRP-to-concrete bonded interface Description of the single lap shear test

    Article • Revue européenne de génie civil, November 2009, Lavoisier

    Dr Sylvain Chataigner

  47. Characterization of FRP-to-concrete bonded interface

    Article • European Journal of Environmental and Civil engineering, October 2009, Taylor & Francis

    Dr Sylvain Chataigner

  48. Laminated materials with plastic interfaces: modeling and calculation

    Article • Modelling and Simulation in Materials Science and Engineering, January 2009, Institute of Physics Publishing

    Dr Sylvain Chataigner