All Stories

  1. Casting poly(urethane‐imide) elastomers with improved thermoviscoelasticity

    Article • Journal of Applied Polymer Science, December 2023, Wiley

    Syang-Peng Rwei

  2. Synthesis and Characterization of Poly(DL-lactide) Containing Fluorene Structures

    Article • Polymers, June 2023, MDPI AG

    Syang-Peng Rwei

  3. Influence of Cross-Linking and Crystalline Morphology on the Shape-Memory Properties of PET/PEN/PCL Copolyesters Using Trimesic Acid and Glycerol

    Article • Polymers, April 2023, MDPI AG

    Syang-Peng Rwei

  4. Synthesis and characterization of poly(urethane-imide) derived from structural effect of diisocyanates

    Article • Journal of Polymer Research, January 2023, Springer Science + Business Media

    Syang-Peng Rwei

  5. A Rapid Thermal Absorption Rate and High Latent Heat Enthalpy Phase Change Fiber Derived from Bio-Based Low Melting Point Copolyesters

    Article • Polymers, August 2022, MDPI AG

    Syang-Peng Rwei

  6. Low-Mass Liquid Crystalline Materials Blended in Recycled Thermoplastic Polyester Elastomer for Corrosion Inhibitor Application

    Article • Polymers, September 2021, MDPI AG

    Syang-Peng Rwei

  7. Highly Stretchable Fully Biomass Autonomic Self-Healing Polyamide Elastomers and Their Foam for Selective Oil Absorption

    Article • Polymers, September 2021, MDPI AG

    Syang-Peng Rwei

  8. Characteristics of Polycarbonate Soft Segment-Based Thermoplastic Polyurethane

    Article • Applied Sciences, June 2021, MDPI AG

    Syang-Peng Rwei

  9. Antibacterial Activity and Protection Efficiency of Polyvinyl Butyral Nanofibrous Membrane Containing Thymol Prepared through Vertical Electrospinning

    Article • Polymers, April 2021, MDPI AG

    Syang-Peng Rwei

  10. Thermal Behavior and Morphology of Thermoplastic Polyurethane Derived from Different Chain Extenders of 1,3- and 1,4-Butanediol

    Article • Applied Sciences, January 2021, MDPI AG

    Syang-Peng Rwei

  11. Synthesis of Water Resistance and Moisture-Permeable Nanofiber Using Sodium Alginate–Functionalized Waterborne Polyurethane

    Article • Polymers, December 2020, MDPI AG

    Syang-Peng Rwei

  12. Synthesis of Bio-Based Poly(Butylene Adipate-co-Butylene Itaconate) Copolyesters with Pentaerythritol: A Thermal, Mechanical, Rheological, and Molecular Dynamics Simulation Study

    Article • Polymers, September 2020, MDPI AG

    Syang-Peng Rwei

  13. Synthesis and Nonisothermal Crystallization Kinetics of Poly(Butylene Terephthalate-co-Tetramethylene Ether Glycol) Copolyesters

    Article • Polymers, August 2020, MDPI AG

    Syang-Peng Rwei

  14. Methods of Synthesis, Characterization and Biomedical Applications of Biodegradable Poly(Ester Amide)s- A Review

    Article • Polymer Degradation and Stability, August 2020, Elsevier

    Syang-Peng Rwei

  15. Effect of 1,2,4,5-Benzenetetracarboxylic Acid on Unsaturated Poly(butylene adipate-co-butylene itaconate) Copolyesters: Synthesis, Non-Isothermal Crystallization Kinetics, Thermal and Mechanical Properties

    Article • Polymers, May 2020, MDPI AG

    Syang-Peng Rwei

  16. Effect of Bis (2-Aminoethyl) Adipamide/Adipic Acid Segment on Polyamide 6: Crystallization Kinetics Study

    Article • Polymers, May 2020, MDPI AG

    Syang-Peng Rwei

  17. Development of Self-Healable Organic/Inorganic Hybrid Materials Containing a Biobased Copolymer via Diels–Alder Chemistry and Their Application in Electromagnetic Interference Shielding

    Article • Polymers, October 2019, MDPI AG

    Syang-Peng Rwei

  18. Effect of Ethylenediaminetetraacetic Acid on Unsaturated Poly(Butylene Adipate-Co-Butylene Itaconate) Copolyester with Low-Melting Point and Controllable Hardness

    Article • Polymers, April 2019, MDPI AG

    Syang-Peng Rwei

  19. Isothermal Crystallization Kinetics Study of Fully Aliphatic PA6 Copolyamides: Effect of Novel Long-Chain Polyamide Salt as a Comonomer

    Article • Polymers, March 2019, MDPI AG

    Syang-Peng Rwei

  20. Fabrication of Self-Healable Magnetic Nanocomposites via Diels−Alder Click Chemistry

    Article • Applied Sciences, February 2019, MDPI AG

    Syang-Peng Rwei

  21. Characterization of Solvent-Treated PEDOT:PSS Thin Films with Enhanced Conductivities

    Article • Polymers, January 2019, MDPI AG

    Syang-Peng Rwei

  22. Synthesis and characterization of copolyamides derived from novel aliphatic bio-based diamine

    Article • Journal of Applied Polymer Science, August 2018, Wiley

    Syang-Peng Rwei

  23. Synthesis of Low Melting Temperature Aliphatic-Aromatic Copolyamides Derived from Novel Bio-Based Semi Aromatic Monomer

    Article • Polymers, July 2018, MDPI AG

    Syang-Peng Rwei

  24. Oil-Water Separation of Electrospun Cellulose Triacetate Nanofiber Membranes Modified by Electrophoretically Deposited TiO2/Graphene Oxide

    Article • Polymers, July 2018, MDPI AG

    Syang-Peng Rwei

  25. Study of theThermo-/pH-Sensitivity of Stereo-Controlled Poly(N-isopropylacrylamide-co-IAM) Copolymers via RAFT Polymerization

    Article • Polymers, May 2018, MDPI AG

    Syang-Peng Rwei

  26. Synthesis and Characterization of pH and Thermo Dual-Responsive Hydrogels with a Semi-IPN Structure Based on N-Isopropylacrylamide and Itaconamic Acid

    Article • Materials, April 2018, MDPI AG

    Syang-Peng Rwei

  27. Functionalized Carbon Black Nanospheres Hybrid with MoS2 Nanoclusters for the Effective Electrocatalytic Reduction of Chloramphenicol

    Article • Electroanalysis, April 2018, Wiley

    Professor shen-ming chen, Syang-Peng Rwei

  28. Novel Two-Dimensional Conjugated Polymer Containing Fluorinated Bithiophene as Donor and Benzoselenodiazole as Acceptor Units with Vinyl-Terthiophene Pendants for Polymer Photovoltaic Cells

    Article • Polymers, July 2017, MDPI AG

    Syang-Peng Rwei

  29. Thermal analysis and melt spinnability of poly(acrylonitrile-co-methyl acrylate) and poly(acrylonitrile-co-dimethyl itaconate) copolymers

    Article • Textile Research Journal, April 2017, SAGE Publications

    Syang-Peng Rwei

  30. A Study of the Curing and Flammability Properties of Bisphenol A Epoxy Diacrylate Resin Utilizing a Novel Flame Retardant Monomer, bis[di-acryloyloxyethyl]-p-tert-butyl-phenyl Phosphate

    Article • Materials, February 2017, MDPI AG

    Syang-Peng Rwei

  31. A study of ethylene vinyl alcohol copolymer fiber for the drawing process

    Article • Textile Research Journal, May 2016, SAGE Publications

    Syang-Peng Rwei

  32. A thermosensitive polymers (NMRP) with (TEMPO) as a stable nitroxide-free radical.

    Article • Journal of Applied Polymer Science, December 2015, Wiley

    Syang-Peng Rwei

  33. Characterization of melt spinnability of ethylene vinyl alcohol copolymers

    Article • Textile Research Journal, September 2015, SAGE Publications

    Syang-Peng Rwei

  34. Thermo- and pH- responsive copolymers: Poly(n-Isopropylacrylamide-co-IAM) copolymers

    Article • Journal of Applied Polymer Science, May 2015, Wiley

    Syang-Peng Rwei

  35. Liquid crystal formation and rheological study in aqueous blends of xanthan/acacia gum

    Article • Food Hydrocolloids, April 2015, Elsevier

    Syang-Peng Rwei

  36. Synthesis and characterization of adipic acid/polyethylene glycol/poly(ethylene terephthalate) copolyester fiber

    Article • Textile Research Journal, February 2015, SAGE Publications

    Syang-Peng Rwei

  37. poly-tetraaniline-urethane/Ag-nanowire or/graphene conductive elastomer

    Article • Colloid & Polymer Science, December 2014, Springer Science + Business Media

    Syang-Peng Rwei

  38. Synthesis and Rheological Characterization of Water-Soluble Glycidyltrimethylammonium-Chitosan

    Article • Marine Drugs, November 2014, MDPI AG

    Syang-Peng Rwei

  39. Formation of liquid crystals and behavior of LCST upon addition of xanthan gum (XG) to hydroxypropyl cellulose (HPC) solutions

    Article • Cellulose, October 2014, Springer Science + Business Media

    Syang-Peng Rwei

  40. Liquid crystalline phase in xanthan gum (XG)/H2O/H3PO3 and XG/H2O/H3PO4 tertiary systems: a thermal and rheological study

    Article • Cellulose, July 2014, Springer Science + Business Media

    Syang-Peng Rwei

  41. Phase formation and transition in a xanthan gum/H2O/H3PO4 tertiary system

    Article • Cellulose, February 2014, Springer Science + Business Media

    Syang-Peng Rwei

  42. Synthesis and viscoelastic characterization of sulfonated chitosan solutions

    Article • Colloid & Polymer Science, November 2013, Springer Science + Business Media

    Syang-Peng Rwei

  43. Kinetics of cyclization reaction in poly(acrylonitrile/methyl acrylate/dimethyl itaconate) copolymer determined by a thermal analysis

    Article • Polymer Degradation and Stability, October 2013, Elsevier

    Syang-Peng Rwei

  44. Effects of surface modifications on the interfacial bonding of flax/β-polypropylene composites

    Article • Composite Interfaces, June 2013, Taylor & Francis

    Syang-Peng Rwei

  45. The crystallization kinetics of Nylon 6/6T and Nylon 66/6T copolymers

    Article • Thermochimica Acta, March 2013, Elsevier

    Syang-Peng Rwei

  46. HPC/H2O/H3PO4 tertiary system: a rheological study

    Article • Cellulose, February 2013, Springer Science + Business Media

    Syang-Peng Rwei

  47. Synthesis and Magnetorheology Study of Iron Oxide and Iron Cobalt Oxide Suspensions

    Article • Journal of Nanomaterials, January 2013, Hindawi Publishing Corporation

    Syang-Peng Rwei

  48. Kinetics of UV-curing of waterborne polyurethane acrylate dendrimer

    Article • Polymer Bulletin, October 2012, Springer Science + Business Media

    Syang-Peng Rwei

  49. Synthesis and characterization of biodegradable and weather-durable PET/PEG/NDC copolymers

    Article • Colloid & Polymer Science, May 2012, Springer Science + Business Media

    Syang-Peng Rwei

  50. 3-D phase diagram of HPC/H2O/H3PO4 tertiary system

    Article • Cellulose, April 2012, Springer Science + Business Media

    Syang-Peng Rwei

  51. Synthesis and characterization of polyethylene oxide and nylon-6 copolymer in a fiber form

    Article • Journal of Applied Polymer Science, April 2012, Wiley

    Syang-Peng Rwei

  52. Electrospinning PVA solution-rheology and morphology analyses

    Article • Fibers and Polymers, January 2012, Springer Science + Business Media

    Syang-Peng Rwei

  53. Molecular Design of Interfacial Modifiers for Polymer-Inorganic Hybrid Solar Cells

    Article • Advanced Energy Materials, November 2011, Wiley

    Syang-Peng Rwei

  54. Investigating the UV-curing performance for polyacrylated polymer in dendritic and regular conformation

    Article • Polymer Bulletin, October 2011, Springer Science + Business Media

    Syang-Peng Rwei

  55. Preparation and characterization of core–shell polyaniline–polystyrene sulfonate@Fe3O4 nanoparticles

    Article • Materials Chemistry and Physics, December 2008, Elsevier

    Syang-Peng Rwei

  56. Sol/gel transition and liquid crystal transition of HPC in ionic liquid

    Article • Cellulose, September 2008, Springer Science + Business Media

    Syang-Peng Rwei

  57. Viscoelasticity and wearability of hyaluronate solutions

    Article • Biochemical Engineering Journal, June 2008, Elsevier

    Syang-Peng Rwei

  58. Synthesis of high performance phosphorine antioxidants and their application to mCOC

    Article • Fibers and Polymers, February 2008, Springer Science + Business Media

    Syang-Peng Rwei

  59. Unsteady-state contact angle on interface between polymer melt and TiO2

    Article • Composite Interfaces, January 2008, Taylor & Francis

    Syang-Peng Rwei

  60. Synthesis and electrical, rheological and thermal characterization of conductive polyurethane

    Article • Colloid & Polymer Science, May 2007, Springer Science + Business Media

    Syang-Peng Rwei

  61. Cascade analysis of mixed gels of xanthan and locust bean gum

    Article • Polymer, October 2006, Elsevier

    Syang-Peng Rwei

  62. Synthesis and photoluminescence of poly(3-hexylthiophene)/titania nanostructured hybrids

    Article • Thin Solid Films, July 2006, Elsevier

    Syang-Peng Rwei

  63. Novel poly(3-nonylthiophene)–TiO2 hybrid materials for photovoltaic cells

    Article • Synthetic Metals, December 2005, Elsevier

    Syang-Peng Rwei

  64. Light scattering and viscoelasticity study of poly(vinyl alcohol)–borax aqueous solutions and gels

    Article • Polymer, July 2005, Elsevier

    Syang-Peng Rwei

  65. PBT/PET conjugated fibers: Melt spinning, fiber properties, and thermal bonding

    Article • Polymer Engineering & Science, January 2004, Wiley

    Syang-Peng Rwei

  66. Synthesis and characterization of tetraaniline-containing copolymer

    Article • Synthetic Metals, April 2003, Elsevier

    Syang-Peng Rwei

  67. Synthesis and characterization of tetraaniline-terminated starburst poly(urethane-urea)

    Article • Synthetic Metals, April 2003, Elsevier

    Syang-Peng Rwei

  68. Formation of hollow fibers in the melt‐spinning process

    Article • Journal of Applied Polymer Science, December 2001, Wiley

    Syang-Peng Rwei

  69. Distributive mixing in a single-screw extruder?evaluation in the flow direction

    Article • Polymer Engineering & Science, October 2001, Wiley

    Syang-Peng Rwei

  70. Formation of hollow fibers in the melt-spinning process

    Article • Journal of Applied Polymer Science, January 2001, Wiley

    Syang-Peng Rwei

  71. Modification of PET in high-speed melt spinning by blending with PEN

    Article • Polymer Engineering & Science, January 2000, Wiley

    Syang-Peng Rwei

  72. Properties of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends

    Article • Polymer Engineering & Science, December 1999, Wiley

    Syang-Peng Rwei

  73. Dog-legging in the melt spinning process

    Article • Polymer Engineering & Science, February 1998, Wiley

    Syang-Peng Rwei

  74. Analysis of dispersion of carbon black in polymeric melts and its effect on compound properties

    Article • Polymer Engineering & Science, January 1992, Wiley

    Syang-Peng Rwei

  75. The Influence of Interstitial Liquids on the Cohesive Strength of Carbon-Black Agglomerates

    Article • Rubber Chemistry and Technology, November 1989, Rubber Division, ACS

    Syang-Peng Rwei