All Stories

  1. Enhancing thermo-mechanical performance of epoxy composites using alkali-treated almond shells for automotive applications

    Article • Journal of Industrial Textiles, August 2025, SAGE Publications

    Dr Suhad D. Salman

  2. Optimised mechanical and morphological performance of hybrid vinyl ester composites with coconut fibre and glass for sustainable applications

    Article • Advances in Materials and Processing Technologies, June 2025, Taylor & Francis

    Dr Suhad D. Salman

  3. Effect of sugarcane content and stacking sequence on the mechanical degradation of hybrid carbon/sugarcane reinforced polyvinyl butyral composites

    Article • The Journal of Strain Analysis for Engineering Design, March 2025, SAGE Publications

    Dr Suhad D. Salman

  4. Void content and moisture absorption behavior of hybrid vinyl ester composites reinforced with different forms of coconut shells and glass

    Article • Journal of Industrial Textiles, February 2025, SAGE Publications

    Dr Suhad D. Salman

  5. Optimizing Diode Laser Performance: Effective Noise Reduction in a Three-Dimension Printing Machine

    Article • Journal of Engineering and Sustainable Development, November 2024, Mustansiriyah University Faculty of Engineering Department

    Dr Suhad D. Salman

  6. Physico - Mechanical characterization property evaluation of polyvinyl butyral composites filled with macadamia nutshell

    Article • Journal of Industrial Textiles, January 2024, SAGE Publications

    Dr Suhad D. Salman

  7. Review evolution of dual-resource-constrained scheduling problems in manufacturing systems: modeling and scheduling methods’ trends

    Article • Soft Computing, October 2023, Springer Science + Business Media

    Dr Suhad D. Salman

  8. Effects of Building Materials on Building Thermal Load in Malaysian Institutional Library

    Article • Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, August 2023, Akademia Baru Publishing

    Dr Suhad D. Salman

  9. State-of-the-art ensemble learning and unsupervised learning in fatigue crack recognition of glass fiber reinforced polyester composite (GFRP) using acoustic emission

    Article • Ultrasonics, July 2023, Elsevier

    Dr Suhad D. Salman

  10. Magnetic cellulose-based composite as a new effectively reusable biosorbent for cationic dye removal: Batch and lab-scale column studies

    Article • Cellulose, June 2023, Springer Science + Business Media

    Dr Suhad D. Salman

  11. A Review of Natural Fiber-Based Filaments for 3D Printing: Filament Fabrication and Characterization

    Article • Materials, May 2023, MDPI AG

    Dr Suhad D. Salman, IR. DR. MOHD NAZRI AHMAD

  12. The influence of pistachio shell addition on the mechanical behavior of self-curing PMMA composites

    Article • Innovative Infrastructure Solutions, May 2023, Springer Science + Business Media

    Dr Suhad D. Salman

  13. The consequences of hot deformation and control cooling on the microstructure of medium carbon microalloyed steel − 38MnSiVS5 grade

    Article • Materials Today Proceedings, April 2023, Elsevier

    Dr Suhad D. Salman

  14. Mechanical, thermal and physical characteristics of oil palm (Elaeis Guineensis) fiber reinforced thermoplastic composites for FDM – Type 3D printer

    Article • Polymer Testing, March 2023, Elsevier

    Dr Suhad D. Salman, IR. DR. MOHD NAZRI AHMAD

  15. DETERMINATION OF PROCESS VARIABILITY BY USING TRIANGULAR FUZZY NUMBER TO MINIMIZE PRODUCTION LEAD TIME IN A DYNAMIC VALUE STREAM MAPPING

    Article • ASEAN Engineering Journal, February 2023, Penerbit UTM Press

    Dr Suhad D. Salman

  16. Indoor Climates and Energy Consumption by Air Conditioning System in a Learning Resource Centre in Malaysia

    Article • Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, February 2023, Akademia Baru Publishing

    Dr Suhad D. Salman

  17. An investigation into the physical, mechanical, tribology, thermal and durability performance of commercial brake material for rail transportation

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, February 2023, SAGE Publications

    Dr Suhad D. Salman

  18. Finite element analysis of oil palm fiber reinforced thermoplastic composites for fused deposition modeling

    Article • Materials Today Proceedings, January 2023, Elsevier

    Dr Suhad D. Salman, IR. DR. MOHD NAZRI AHMAD

  19. Temporary sound barrier system from natural fiber polymeric composite

    Article • Materials Today Proceedings, January 2023, Elsevier

    Dr Suhad D. Salman

  20. Forecast Innovative Development Level in Green Supply Chains Using a Comprehensive Fuzzy Algorithm

    Article • International Journal of Fuzzy Systems, December 2022, Springer Science + Business Media

    Dr Suhad D. Salman

  21. An Effective 4–Phased Framework for Scheduling Job-Shop Manufacturing Systems Using Weighted NSGA-II

    Article • Mathematics, December 2022, MDPI AG

    Dr Suhad D. Salman

  22. Correlation Between Cutting Force and Residual Stress in Dry End-Milling of Inconel HX

    Article • International Journal of Integrated Engineering, November 2022, Penerbit UTHM

    Dr Suhad D. Salman

  23. Natural-based filament wire custom-made for fused deposition modeling (FDM), 3D Printer

    Article • Rapid Prototyping Journal, November 2022, Emerald

    IR. DR. MOHD NAZRI AHMAD, Dr Suhad D. Salman

  24. CHARACTERIZATION OF SAGO PALM-CARBON FIBRE REINFORCED EPOXY HYBRID COMPOSITES

    Article • Journal of Engineering and Sustainable Development, November 2022, Mustansiriyah University Faculty of Engineering Department

    Dr Suhad D. Salman

  25. Rheological Properties of Natural Fiber Reinforced Thermoplastic Composite for Fused Deposition Modeling (FDM): A Short Review

    Article • Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, September 2022, Akademia Baru Publishing

    Dr Suhad D. Salman, IR. DR. MOHD NAZRI AHMAD

  26. Physical and flammability properties of treated sugar palm fibre reinforced polylactic acid composites

    Article • Journal of Industrial Textiles, August 2022, SAGE Publications

    Dr Suhad D. Salman

  27. SCRUTINIZING THE IMPACT OF ESSENTIAL LEAN METHODS ON SUSTAINABLE PERFORMANCE IN MALAYSIAN MANUFACTURING FIRMS

    Article • Jurnal Teknologi (Sciences & Engineering), July 2022, Penerbit UTM Press

    Dr Suhad D. Salman

  28. Single Fiber Test Behavior of Lignocellulose Sugar Palm Fibers: Effect of Treatments

    Article • Key Engineering Materials, July 2022, Trans Tech Publications

    Dr Suhad D. Salman

  29. Effect of different shapes of the iron waste/polyester-based composites on the mechanical behaviour

    Article • Innovative Infrastructure Solutions, June 2022, Springer Science + Business Media

    Dr Suhad D. Salman

  30. LEAN IMPACT ON MANUFACTURING PRODUCTIVITY: A CASE STUDY OF INDUSTRIALIZED BUILDING SYSTEM (IBS) MANUFACTURING FACTORY

    Article • Jurnal Teknologi (Sciences & Engineering), May 2022, Penerbit UTM Press

    Dr Suhad D. Salman

  31. Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites

    Article • Polymers, May 2022, MDPI AG

    Dr Suhad D. Salman, IR. DR. MOHD NAZRI AHMAD

  32. Solar-Based Mosquito Trap for Household Purposes

    Article • International Journal of Social Ecology and Sustainable Development, January 2022, IGI Global

    Dr Suhad D. Salman

  33. Cutting Force in Dry Slot-Milling of Hastelloy X

    Article • January 2022, Springer Science + Business Media

    Dr Suhad D. Salman

  34. Effects of drilling parameters on delamination of kenaf-glass fibre reinforced unsaturated polyester composites

    Article • Journal of Industrial Textiles, December 2021, SAGE Publications

    Dr Suhad D. Salman

  35. Environmental effects on the mechanical properties of E-glass and S-glass fiber epoxy composite ring specimens used in aircraft fuel pipes

    Article • INCAS BULLETIN, December 2021, INCAS - National Institute for Aerospace Research Elie Carafoli

    Dr Suhad D. Salman

  36. The Effect of Solid-State Processes and Heat Treatment on the Properties of AA7075 Aluminum Waste Recycling Nanocomposite

    Article • Materials, November 2021, MDPI AG

    Dr Suhad D. Salman

  37. Rheology study on fiber composite material for FDM-3D Printer

    Article • Polymers, October 2021, MDPI AG

    IR. DR. MOHD NAZRI AHMAD, Dr Suhad D. Salman

  38. Physical, Mechanical, and Morphological Properties of Treated Sugar Palm/Glass Reinforced Poly(Lactic Acid) Hybrid Composites

    Article • Polymers, October 2021, MDPI AG

    Dr Suhad D. Salman

  39. Quasi-Static Compression Properties of Bamboo and PVC Tube Reinforced Polymer Foam Structures

    Article • Polymers, October 2021, MDPI AG

    Dr. R.A. Ilyas, Dr Suhad D. Salman

  40. Production of Aluminum AA6061 Hybrid Nanocomposite from Waste Metal Using Hot Extrusion Process: Strength Performance and Prediction by RSM and Random Forest

    Article • Materials, October 2021, MDPI AG

    Dr Suhad D. Salman

  41. Mechanical Properties of Sugar Palm (Arenga pinnata Wurmb. Merr)/Glass Fiber-Reinforced Poly(lactic acid) Hybrid Composites for Potential Use in Motorcycle Components

    Article • Polymers, September 2021, MDPI AG

    Dr Suhad D. Salman

  42. Conceptualizing Smart Manufacturing Readiness-Maturity Model for Small and Medium Enterprise (SME) in Malaysia

    Article • Sustainability, August 2021, MDPI AG

    Dr Suhad D. Salman

  43. Effect of alkaline and benzoyl chloride treatments on the mechanical and morphological properties of sugar palm fiber-reinforced poly(lactic acid) composites

    Article • Textile Research Journal, August 2021, SAGE Publications

    Dr. R.A. Ilyas, Dr Suhad D. Salman

  44. The Effects of CuO and SiO2 on Aluminum AA6061 Hybrid Nanocomposite as Reinforcements: A Concise Review

    Article • Coatings, August 2021, MDPI AG

    Dr Suhad D. Salman

  45. Effect of Increasing Spindle Speed at a Constant Chip Load on Cutting Force Behaviour of Hastelloy X

    Article • International Journal of Automotive and Mechanical Engineering, June 2021, Universiti Malaysia Pahang Publisher

    Dr Suhad D. Salman

  46. Physical, Mechanical and Morphological Properties of Sugar Palm Fiber Reinforced Polylactic Acid Composites

    Article • Fibers and Polymers, June 2021, Springer Science + Business Media

    Dr Suhad D. Salman

  47. AA7075-ZrO2 Nanocomposites Produced by the Consecutive Solid-State Process: A Review of Characterisation and Potential Applications

    Article • Metals, May 2021, MDPI AG

    Dr Suhad D. Salman

  48. Challenges in Minimizing Copper Dissolution for Lead Free Wave Soldering in Surface Mount Technology Going Towards Green Manufacturing

    Article • International Journal of Precision Engineering and Manufacturing-Green Technology, May 2021, Springer Science + Business Media

    Dr Suhad D. Salman

  49. Flow Characteristics of Disk Bypass Pipeline Inspection Gauge (PIG) in Natural Gas Pipelines using Computational Fluid Dynamics

    Article • CFD letters, April 2021, Akademia Baru Publishing

    Dr Suhad D. Salman

  50. Effect of Spindle Speed and Feed Per Tooth in Feed Rate Perspective on Inconel HX Cutting Force

    Article • Journal of Mechanical Engineering, April 2021, UiTM Press, Universiti Teknologi MARA

    Dr Suhad D. Salman

  51. Experimental Investigation on the Effect Due to Mould Vibrations on Mechanical and Metallurgical Properties of Aluminum Alloy (A-1050)

    Article • International Journal of Surface Engineering and Interdisciplinary Materials Science, January 2021, IGI Global

    Dr Suhad D. Salman

  52. Influence of CaCO3 in pultruded glass fiber/unsaturated polyester resin composite on flexural creep behavior using conventional and time-temperature superposition principle methods

    Article • Polimery, November 2020, Industrial Chemistry Research Institute

    Dr Suhad D. Salman

  53. Low Velocity Impact and Internal Pressure Behaviors of Unaged E-Glass and S-Glass/Epoxy Composite Elbow Pipe Joints

    Article • Journal of Pipeline Systems Engineering and Practice, November 2020, American Society of Civil Engineers (ASCE)

    Dr Suhad D. Salman

  54. Mechanical Performance of Unstitched and Silk Fiber-Stitched Woven Kenaf Fiber-Reinforced Epoxy Composites

    Article • Materials, October 2020, MDPI AG

    Dr Suhad D. Salman

  55. Tensile Strength and Moisture Absorption of Sugar Palm-Polyvinyl Butyral Laminated Composites

    Article • Polymers, August 2020, MDPI AG

    Dr Suhad D. Salman

  56. Impact and internal pressure failure of E-glass and S-glass epoxy composite elbow pipe joints influenced by sea water

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, August 2020, SAGE Publications

    Dr Suhad D. Salman

  57. The influence of kenaf contents and stacking sequence on drop-weight impact properties of hybrid laminated composites reinforced polyvinyl butyral composites

    Article • Journal of Industrial Textiles, July 2020, SAGE Publications

    Dr Suhad D. Salman

  58. Effect of chip load and spindle speed on cutting force of Hastelloy X

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, March 2020, Universiti Malaysia Pahang Publisher

    Dr Suhad D. Salman

  59. Characterisation of the tensile and fracture properties of filament wound natural fibre rings

    Article • January 2020, American Institute of Physics

    Dr Suhad D. Salman

  60. The supplier-retailer optimal replenishment decisions under a two-level trade credit model with shortage for deteriorating items

    Article • International Journal of Mathematics in Operational Research, January 2020, Inderscience Publishers

    Dr Suhad D. Salman

  61. Effect of Silica Aerogel Additive on Mechanical Properties of the Sugar Palm Fiber-Reinforced Polyester Composites

    Article • International Journal of Polymer Science, December 2019, Hindawi Publishing Corporation

    Dr Suhad D. Salman

  62. Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

    Article • Defence Technology, December 2019, Elsevier

    Dr Suhad D. Salman

  63. Partial replacement of synthetic fibres by natural fibres in hybrid composites and its effect on monotonic properties

    Article • Journal of Industrial Textiles, October 2019, SAGE Publications

    Dr Suhad D. Salman

  64. Dehulled coffee husk-based biocomposites for green building materials

    Article • Journal of Thermoplastic Composite Materials, September 2019, SAGE Publications

    Dr Suhad D. Salman

  65. Sugar palm fiber/polyester nanocomposites: Influence of adding nanoclay fillers on thermal, dynamic mechanical, and physical properties

    Article • Journal of Vinyl Technology, September 2019, Wiley

    Dr Suhad D. Salman

  66. Effect of Soil Burial on Physical, Mechanical and Thermal Properties of Sugar Palm Fibre Reinforced Vinyl Ester Composites

    Article • Fibers and Polymers, September 2019, Springer Science + Business Media

    Dr Suhad D. Salman

  67. Analysis on the Impact Behaviors of E and S-glass Composite Elbow Pipe Joints Exposed to Impact Loading Followed by Axial Compression

    Article • International Journal of Manufacturing Materials and Mechanical Engineering, July 2019, IGI Global

    Dr Suhad D. Salman

  68. Effect of Fibre Loading on the Physical, Mechanical and Thermal Properties of Sugar Palm Fibre Reinforced Vinyl Ester Composites

    Article • Fibers and Polymers, May 2019, Springer Science + Business Media

    Dr Suhad D. Salman

  69. Hybrid and Nonhybrid Laminate Composites of Sugar Palm and Glass Fibre-Reinforced Polypropylene: Effect of Alkali and Sodium Bicarbonate Treatments

    Article • International Journal of Polymer Science, April 2019, Hindawi Publishing Corporation

    Dr Suhad D. Salman

  70. Hoop tensile strength behaviour between different thicknesses E-glass and S-glass FRP rings

    Article • AIMS Biophysics, January 2019, American Institute of Mathematical Sciences (AIMS)

    Dr Suhad D. Salman

  71. Study Of Interior Temperature Distribution And Implementation Of Smart Materials In The Truck Cabin During Summer Conditions

    Article • Materials Today Proceedings, January 2019, Elsevier

    Dr Suhad D. Salman

  72. Comparative study of physical, mechanical, and thermal properties on sugar palm fiber (Arenga pinnata (Wurmb) Merr.) reinforced vinyl ester composites obtained from different geographical locations

    Article • BioResources, November 2018, BioResources

    Dr Suhad D. Salman

  73. Effectiveness of Alkali and Sodium Bicarbonate Treatments on Sugar Palm Fiber: Mechanical, Thermal, and Chemical Investigations

    Article • Journal of Natural Fibers, October 2018, Taylor & Francis

    Dr Suhad D. Salman

  74. Effect of Organo-Modified Nanoclay on the Mechanical Properties of Sugar Palm Fiber-reinforced Polyester Composites

    Article • BioResources, August 2018, BioResources

    Dr Suhad D. Salman

  75. Vertex angles effects in the energy absorption of axially crushed kenaf fibre-epoxy reinforced elliptical composite cones

    Article • Defence Technology, August 2018, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  76. Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2018, Universiti Malaysia Pahang Publisher

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  77. Mechanical properties of a novel fibre metal laminate reinforced with the carbon, flax, and sugar palm fibres

    Article • BioResources, June 2018, BioResources

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  78. Crushing behavior of kenaf fiber/wooden stick reinforced epoxy hybrid “green” composite elliptical tubes

    Article • Polimery, June 2018, Industrial Chemistry Research Institute

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  79. Natural fiber for green technology in automotive industry: A brief review

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Suhad D. Salman

  80. Thermal and physicochemical properties of sugar palm fibre treated with borax

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Suhad D. Salman

  81. A COMPARATIVE STUDY BETWEEN SILICON, METALS AND SOME BIODEGRADABLE MATERIALS IN THE GATE FABRICATION PROCESS OF THE VOLTAGE CONTROLLED SWITCH TRANSISTOR: EXPERIMENTALLY AND THEORETICALLY

    Article • Journal of Engineering and Sustainable Development, March 2018, Mustansiriyah University Faculty of Engineering Department

    Dr Suhad D. Salman

  82. EFFECT OF NATURAL DURIAN SKIN ON MECHANICAL AND MORPHOLOGICAL PROPERTIES OF KEVLAR COMPOSITES IN STRUCTURAL APPLICATIONS

    Article • Journal of Engineering and Sustainable Development, March 2018, Mustansiriyah University Faculty of Engineering Department

    Dr Suhad D. Salman

  83. Physical, Mechanical and Ballistic Properties of Kenaf Fiber Reinforced Poly Vinyl Butyral and Its Hybrid Composites

    Article • January 2018, Elsevier

    Dr Suhad D. Salman

  84. Fluid flow analysis of E-glass fiber reinforced pipe joints in oil and gas industry

    Article • January 2018, American Institute of Physics

    Dr Suhad D. Salman

  85. A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites

    Article • Multidiscipline Modeling in Materials and Structures, November 2017, Emerald

    Professor S.M. Sapuan, Dr Suhad D. Salman

  86. Comparative study on chemical composition, physical, tensile, and thermal properties of sugar palm fiber (Arenga pinnata) obtained from different geographical locations

    Article • BioResources, October 2017, BioResources

    Dr Suhad D. Salman

  87. Characterization of millet (Pennisetum glaucum) husk fiber (MHF) and its use as filler for high density polyethylene (HDPE) composites

    Article • BioResources, October 2017, BioResources

    Dr Suhad D. Salman

  88. Failures Analysis of E-Glass Fibre reinforced pipes in Oil and Gas Industry: A Review

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Dr Suhad D. Salman

  89. Dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique

    Article • Wear, June 2017, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  90. Energy absorption capacities of kenaf fibre-reinforced epoxy composite elliptical cones with circumferential holes

    Article • Fibers and Polymers, June 2017, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  91. Development of a conceptual model for risk-based quality management system

    Article • Total Quality Management & Business Excellence, April 2017, Taylor & Francis

    Dr Suhad D. Salman

  92. Dynamic Mechanical Analysis of Treated and Untreated Sugar Palm Fibre-based Phenolic Composites

    Article • BioResources, March 2017, BioResources

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  93. A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption

    Article • Plastics Rubber and Composites Macromolecular Engineering, March 2017, Taylor & Francis

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  94. Effect of Treatments on the Physical and Morphological Properties of SPF/Phenolic Composites

    Article • Journal of Natural Fibers, February 2017, Taylor & Francis

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  95. Quasi-static penetration behavior of plain woven kenaf/aramid reinforced polyvinyl butyral hybrid laminates

    Article • Journal of Industrial Textiles, February 2017, SAGE Publications

    Dr Suhad D. Salman

  96. Influence of treatments on the mechanical and thermal properties of sugar palm fibre reinforced phenolic composites

    Article • BioResources, January 2017, BioResources

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  97. Acoustic emission analysis for characterisation of damage mechanisms in glass fiber reinforced polyester composite

    Article • Australian Journal of Mechanical Engineering, December 2016, Taylor & Francis

    Dr Suhad D. Salman

  98. Sugar Palm Fibre and its Composites: A Review of Recent Developments

    Article • BioResources, November 2016, BioResources

    Dr Suhad D. Salman

  99. The viability of microwave sintering process to produce a ceramic tool insert

    Article • International Journal of Automotive and Mechanical Engineering, September 2016, Universiti Malaysia Pahang Publisher

    Dr Suhad D. Salman

  100. Fibre metal laminates

    Article • Journal of Reinforced Plastics and Composites, September 2016, SAGE Publications

    Mr Chandrasekar Muthukumar, Dr Mohammad Jawaid, Dr Suhad D. Salman

  101. Effect of kenaf fibers on trauma penetration depth and ballistic impact resistance for laminated composites

    Article • Textile Research Journal, August 2016, SAGE Publications

    Dr Suhad D. Salman

  102. The mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites

    Article • International Journal of Precision Engineering and Manufacturing, August 2016, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  103. Ballistic Impact Resistance of Plain Woven Kenaf/Aramid Reinforced Polyvinyl Butyral Laminated Hybrid Composite

    Article • BioResources, July 2016, BioResources

    Dr Suhad D. Salman

  104. Physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment

    Article • Cellulose, July 2016, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  105. Water Absorption Behaviour and Impact Strength of Kenaf-Kevlar Reinforced Epoxy Hybrid Composites

    Article • July 2016, SAGE Publications

    Dr RIDWAN YAHAYA, Dr Suhad D. Salman, Dr Mohammad Jawaid

  106. Tension-Compression Fatigue Behavior of Plain Woven Kenaf/Kevlar Hybrid Composites

    Article • BioResources, February 2016, BioResources

    Dr Suhad D. Salman

  107. Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application

    Article • Defence Technology, February 2016, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  108. Investigating ballistic impact properties of woven kenaf-aramid hybrid composites

    Article • Fibers and Polymers, February 2016, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  109. Partial Replacement of Glass Fiber by Woven Kenaf in Hybrid Composites and its Effect on Monotonic and Fatigue Properties

    Article • BioResources, February 2016, BioResources

    Dr Suhad D. Salman

  110. Influence of Fiber Content on Mechanical and Morphological Properties of Woven Kenaf Reinforced PVB Film Produced Using a Hot Press Technique

    Article • International Journal of Polymer Science, January 2016, Hindawi Publishing Corporation

    Dr Suhad D. Salman

  111. Measurement of ballistic impact properties of woven kenaf–aramid hybrid composites

    Article • Measurement, January 2016, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  112. A new method for decreasing cell-load variation in dynamic cellular manufacturing systems

    Article • International Journal of Industrial Engineering Computations, January 2016, Growing Science

    Dr Suhad D. Salman

  113. Proposed linear-mathematical model for configuring cell and designing unequal-area facility layout in dynamic cellular manufacturing system

    Article • International Journal of Industrial and Systems Engineering, January 2016, Inderscience Publishers

    Dr Suhad D. Salman

  114. Review of evolution of cellular manufacturing system’s approaches: Material transferring models

    Article • International Journal of Precision Engineering and Manufacturing, January 2016, Springer Science + Business Media

    Dr Suhad D. Salman

  115. Tensile and Compressive Properties of Woven Kenaf/Glass Sandwich Hybrid Composites

    Article • International Journal of Polymer Science, January 2016, Hindawi Publishing Corporation

    Dr Suhad D. Salman

  116. Influence of resin system on the energy absorption capability and morphological properties of plain woven kenaf composites

    Article • IOP Conference Series Materials Science and Engineering, December 2015, Institute of Physics Publishing

    Dr Suhad D. Salman

  117. Monotonic and fatigue properties of kenaf /glass hybrid composites under fully reversed cyclic loading

    Article • IOP Conference Series Materials Science and Engineering, December 2015, Institute of Physics Publishing

    Dr Suhad D. Salman

  118. Effects of Processing Method, Moisture Content, and Resin System on Physical and Mechanical Properties of Woven Kenaf Plant Fiber Composites

    Article • BioResources, December 2015, BioResources

    Dr Suhad D. Salman

  119. Effects of Kenaf Fiber Orientation on Mechanical Properties and Fatigue Life of Glass/Kenaf Hybrid Composites

    Article • BioResources, December 2015, BioResources

    Dr Suhad D. Salman

  120. The Effects of Orientation on the Mechanical and Morphological Properties of Woven Kenaf-reinforced Poly Vinyl Butyral Film

    Article • BioResources, December 2015, BioResources

    Dr Suhad D. Salman

  121. Experimental Comparison between Two Types of Hybrid Composite Materials in Compression Test

    Article • Manufacturing Science and Technology, December 2015, Horizon Research Publishing Co., Ltd.

    Dr Suhad D. Salman

  122. Process parameters for cylindrical deep drawing components

    Article • Advances in Materials and Processing Technologies, October 2015, Taylor & Francis

    Dr Suhad D. Salman

  123. The effect of winding angles on crushing behavior of filament wound hollow kenaf yarn fibre reinforced unsaturated polyester composites

    Article • Fibers and Polymers, October 2015, Springer Science + Business Media

    Dr Suhad D. Salman

  124. Kenaf/Synthetic and Kevlar®/Cellulosic Fiber-Reinforced Hybrid Composites: A Review

    Article • BioResources, August 2015, BioResources

    Dr Suhad D. Salman

  125. A review of the application of acoustic emission technique in engineering

    Article • STRUCTURAL ENGINEERING AND MECHANICS, June 2015, Techno-Press

    Dr Suhad D. Salman

  126. Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf–aramid hybrid laminated composites

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  127. Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Professor S.M. Sapuan, Dr Suhad D. Salman

  128. Physical, Mechanical, and Morphological Properties of Woven Kenaf/Polymer Composites Produced Using a Vacuum Infusion Technique

    Article • International Journal of Polymer Science, January 2015, Hindawi Publishing Corporation

    Dr Suhad D. Salman

  129. Minimizing makespan of a resource-constrained scheduling problem: A hybrid greedy and genetic algorithms

    Article • International Journal of Industrial Engineering Computations, January 2015, Growing Science

    Dr Suhad D. Salman

  130. Mechanical performance of woven kenaf-Kevlar hybrid composites

    Article • Journal of Reinforced Plastics and Composites, November 2014, SAGE Publications

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  131. Quasi-static penetration and ballistic properties of kenaf–aramid hybrid composites

    Article • Materials & Design (1980-2015), November 2014, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  132. Review on Dynamic Cellular Manufacturing System

    Article • Advanced Science Letters, October 2014, American Scientific Publishers

    Dr Suhad D. Salman

  133. Literature Review on Dynamic Cellular Manufacturing System

    Article • IOP Conference Series Materials Science and Engineering, June 2014, Institute of Physics Publishing

    Dr Suhad D. Salman

  134. Selection of Natural Fibre for Hybrid Laminated Composites Vehicle Spall Liners Using Analytical Hierarchy Process (AHP)

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  135. Tensile Properties of Kenaf Yarn Fibre Reinforced Unsaturated Polyester Composites at Different Fibre Orientations

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  136. Developing a Framework for Sustainable Supply Chain Management

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Suhad D. Salman

  137. Influence of Leadership Behavior on Project Management Performance in Malaysian Industries

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Suhad D. Salman

  138. Cab Transfer Process Improvement at an Automotive Manufacturing Facility

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Suhad D. Salman

  139. Quality Management System and Risk Management System: Similarities and Possibilities for Integration

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Suhad D. Salman

  140. Incremental Sheet Forming (ISF) of AISI 316 Stainless Steel Sheet Using CNC Milling Machine

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Dr Suhad D. Salman

  141. Effects of kenaf contents and fiber orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall liners

    Article • Polymer Composites, April 2014, Wiley

    Professor S.M. Sapuan, Dr RIDWAN YAHAYA, Dr Mohammad Jawaid, Dr Suhad D. Salman

  142. Effect of Post Curing, Fibre Content and Resin-Hardener Mixing Ratio on the Properties of Kenaf-Aramid Hybrid Composites

    Article • Applied Mechanics and Materials, April 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  143. Review of Lean Adoption within Small and Medium Sized Enterprises

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Dr Suhad D. Salman

  144. Contribution of lean and Six Sigma to effective cost of quality management

    Article • International Journal of Productivity and Quality Management, January 2014, Inderscience Publishers

    Dr Suhad D. Salman

  145. Reviewing the Literature of Inventory Models under Trade Credit Contact

    Article • Discrete Dynamics in Nature and Society, January 2014, Hindawi Publishing Corporation

    Dr Suhad D. Salman

  146. Thermal Parameter Affects on the Part Built Using 3D Printer Projet SD 3000

    Article • Materials Science Forum, November 2013, Trans Tech Publications

    Dr Suhad D. Salman

  147. Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibre Composite Filled Thermosetting Polymer Composites

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  148. Decision-Making Trial and Evaluation Laboratory

    Article • Research Journal of Applied Sciences Engineering and Technology, April 2013, Maxwell Scientific Publication Corp.

    Dr Suhad D. Salman

  149. Impregnation modification of sugar palm fibres with phenol formaldehyde and unsaturated polyester

    Article • Fibers and Polymers, February 2013, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Suhad D. Salman

  150. Sugar palm (Arenga pinnata): Its fibres, polymers and composites

    Article • Carbohydrate Polymers, January 2013, Elsevier

    Professor S.M. Sapuan, Dr Suhad D. Salman

  151. Chemical Composition and FT-IR Spectra of Sugar Palm (Arenga pinnata) Fibers Obtained from Different Heights

    Article • Journal of Natural Fibers, January 2013, Taylor & Francis

    Professor S.M. Sapuan, Dr Suhad D. Salman

  152. Modeling for Green Supply Chain Evaluation

    Article • Mathematical Problems in Engineering, January 2013, Hindawi Publishing Corporation

    Dr Shahryar Sorooshian, Dr Suhad D. Salman

  153. Interfacial Debonding Force and Shear Strength of Sugar Palm (<i>Arenga pinnata</i>) Fiber Reinforced Composites by Pull-Out Test

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Dr Suhad D. Salman

  154. Improving Purchasing Performance by Implementation of QMS Process Management Approach in a Manufacturing Company

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Dr Suhad D. Salman

  155. Comparison of STEP-NC with ISO6983 in Terms of Manufacturing Interoperability

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Suhad D. Salman

  156. Development of Priority Oriented Scheduling Method to Increase the Reliability of Manufacturing Systems

    Article • American Journal of Applied Sciences, September 2012, Science Publications

    Dr Suhad D. Salman

  157. A Comparison Study on Different Toolpath Strategy in Pocket Milling of AISI 420 Stainless Steel

    Article • Advanced Science Letters, June 2012, American Scientific Publishers

    Dr Suhad D. Salman

  158. IFSS, TG, FT-IR spectra of impregnated sugar palm (Arenga pinnata) fibres and mechanical properties of their composites

    Article • Journal of Thermal Analysis and Calorimetry, June 2012, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Suhad D. Salman

  159. Experimental Investigation of HSS Face Milling to AL6061 using Taguchi Method

    Article • Procedia Engineering, January 2012, Elsevier

    Dr Suhad D. Salman

  160. Horizontal collaboration in logistics: a feasible task for group purchasing

    Article • International Journal of Procurement Management, January 2012, Inderscience Publishers

    Dr Suhad D. Salman

  161. Characterization of sugar palm (Arenga pinnata) fibres

    Article • Journal of Thermal Analysis and Calorimetry, July 2011, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Suhad D. Salman

  162. Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  163. Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  164. Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  165. Pre-Treatment by Water Retting to Improve the Interfacial Bonding Strength of Sugar Palm Fibre Reinforced Epoxy Composite

    Article • Polymers from Renewable Resources, February 2010, SAGE Publications

    Dr Suhad D. Salman

  166. Optimization of Warpage Defect in Injection Moulding Process Using ABS Material

    Article • January 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Suhad D. Salman

  167. The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber-Reinforced Epoxy Composites

    Article • Polymer-Plastics Technology and Engineering, May 2008, Taylor & Francis

    Professor S.M. Sapuan, Dr Suhad D. Salman

  168. Moisture absorption behavior of sugar palm fiber reinforced epoxy composites

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    Professor S.M. Sapuan, Dr Suhad D. Salman

  169. Improving productivity and efficiency of a vehicle seat assembly line in a manufacturing company

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Dr Suhad D. Salman