All Stories

  1. Evolution of microstructure and mechanical properties of Ti-Nb-Zr and Ti-Nb-Zr-Ta-Sn alloys in severe plastic deformation

    Article • Materials Letters, March 2025, Elsevier

    Dr. Stepan I. Stepanov

  2. Microstructure and Physico-Mechanical Properties of Biocompatible Titanium Alloy Ti-39Nb-7Zr after Rotary Forging

    Article • Metals, April 2024, MDPI AG

    Dr. Stepan I. Stepanov

  3. The Effect of Cooling Rate on Crystallographic Features of Phase Transformations in Zr-2.5Nb

    Article • Materials, May 2023, MDPI AG

    Dr. Stepan I. Stepanov

  4. A Review—Additive Manufacturing of Intermetallic Alloys Based on Orthorhombic Titanium Aluminide Ti2AlNb

    Article • Materials, January 2023, MDPI AG

    Dr. Stepan I. Stepanov

  5. Crystallographic Features of Phase Transformations during the Continuous Cooling of a Ti6Al4V Alloy from the Single-Phase β-Region

    Article • Materials, August 2022, MDPI AG

    Dr. Stepan I. Stepanov

  6. Industry 4.0 and Digitalisation in Healthcare

    Article • Materials, March 2022, MDPI AG

    Mr Andrei Shishkin, Dr. Stepan I. Stepanov

  7. Compression deformation and fracture behavior of additively manufactured Ti–6Al–4V cellular structures

    Article • International Journal of Lightweight Materials and Manufacture, March 2022, Elsevier

    Dr. Stepan I. Stepanov

  8. Tensile Deformation and Fracture Behavior of API-5L X70 Line Pipe Steel

    Article • Materials, January 2022, MDPI AG

    Dr. Stepan I. Stepanov

  9. EBSD analysis of plane and direction combinations with the weakest crack resistance in pipe plate steels

    Article • January 2022, American Institute of Physics

    Dr. Stepan I. Stepanov

  10. Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn

    Article • International Journal of Molecular Sciences, September 2021, MDPI AG

    Dr. Stepan I. Stepanov

  11. A general model for the crystal structure of orthorhombic martensite in Ti alloys

    Article • Acta Crystallographica Section B Structural Science Crystal Engineering and Materials, September 2021, International Union of Crystallography

    Dr. Stepan I. Stepanov

  12. The Spectrum of Crystallographic Misorientations of Intercrystalline Boundaries for BCC-HCP Phase Transformation in Additively Manufactured Ti-6Al-4V

    Article • Defect and Diffusion Forum, August 2021, Trans Tech Publications

    Dr. Stepan I. Stepanov

  13. Texturing and Phase Evolution in Ti-6Al-4V: Effect of Electron Beam Melting Process, Powder Re-Using, and HIP Treatment

    Article • Materials, August 2021, MDPI AG

    Dr. Stepan I. Stepanov

  14. Additively manufactured Ti-6-4 ELI customized subperiosteal dental exo-implant

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr. Stepan I. Stepanov

  15. Effect of Build Orientation in Electron Beam Melting of Ti-6Al-4V Specimens

    Article • November 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Stepan I. Stepanov

  16. Effect of Thermomechanical Treatment Parameters on Structure, Phase Composition and Mechanical Properties of Ti-3Al-5Mo-4.5V Titanium Alloy

    Article • IOP Conference Series Materials Science and Engineering, November 2020, Institute of Physics Publishing

    Dr. Stepan I. Stepanov

  17. Fracture behavior of cellular structures obtained by selective laser melting

    Article • Diagnostics Resource and Mechanics of materials and structures, August 2020, Institute of Engineering Science, Ural Branch RAS

    Dr. Stepan I. Stepanov

  18. Finite Element Simulation of Cellular Structure Built from Orthogonal Cylindrical Struts

    Article • Materials Science Forum, May 2020, Trans Tech Publications

    Dr. Stepan I. Stepanov

  19. Application of optical methods in tests of new materials with gradient structure

    Article • IOP Conference Series Materials Science and Engineering, May 2020, Institute of Physics Publishing

    Dr. Stepan I. Stepanov

  20. Structure, Phase Composition, and Mechanical Properties of Biocompatible Titanium Alloys of Different Types

    Article • The Physics of Metals and Metallography, April 2020, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov

  21. Effect of Friction on Compression Test of Ti-6Al-4V with Open-Cellular Structure

    Article • Solid State Phenomena, January 2020, Trans Tech Publications

    Dr. Stepan I. Stepanov

  22. Variation of the Structure-and-Phase Condition and Physical and Mechanical Properties of Cold-Deformed Leaded Brass Under Heating

    Article • Metal Science and Heat Treatment, July 2019, Springer Science + Business Media

    Dr. Stepan I. Stepanov

  23. Properties Anisotropy of Additive Manufactured High-Porous Titanium Alloy with Non-Equiaxial Cellular Structure

    Article • Materials Science Forum, February 2019, Trans Tech Publications

    Dr. Stepan I. Stepanov

  24. Structure and Mechanical Properties of Electrical Copper Wire Processed by Coarse and Medium Drawing

    Article • Materials Science Forum, February 2019, Trans Tech Publications

    Dr. Stepan I. Stepanov

  25. The effect of thermal treatment on the properties of SLM samples with a bionic design

    Article • E3S Web of Conferences, January 2019, EDP Sciences

    Dr. Stepan I. Stepanov

  26. Anisotropy of additively manufactured Ti-6-4 lattice structure

    Article • January 2019, American Institute of Physics

    Dr. Stepan I. Stepanov

  27. Numeric Loading Simulation of Titanium Implant Manufactured Using 3D Printing

    Article • Solid State Phenomena, October 2018, Trans Tech Publications

    Dr. Stepan I. Stepanov

  28. Effect of Annealing on the Structure and Properties of Titanium Alloy with Cellular Architecture for Medical Applications

    Article • Metal Science and Heat Treatment, September 2018, Springer Science + Business Media

    Dr. Stepan I. Stepanov

  29. Relationship between mechanical properties and density of Ti obtained by additive technology

    Article • Tsvetnye Metally, May 2018, Ore and Metals Publishing House

    Dr. Stepan I. Stepanov

  30. Effect of SLM parameters on the structure and properties of CP-Ti

    Article • January 2018, American Institute of Physics

    Dr. Stepan I. Stepanov

  31. Fiber vs Rolling Texture: Stress State Dependence for Cold-Drawn Wire

    Article • Metallurgical and Materials Transactions A, December 2017, Springer Science + Business Media

    Dr. Stepan I. Stepanov

  32. Relationship between Deformation and Recrystallization Texture in Copper Wire

    Article • Materials Science Forum, September 2017, Trans Tech Publications

    Dr. Stepan I. Stepanov

  33. Abnormal Behavior of Lattice Spacing of Titanium Orthorhombic Martensite

    Article • Materials Science Forum, September 2017, Trans Tech Publications

    Dr. Stepan I. Stepanov

  34. Effect of Pore Architecture of Titanium Implants on Stress-Strain State upon Compression

    Article • Solid State Phenomena, September 2017, Trans Tech Publications

    Dr. Stepan I. Stepanov

  35. Thermal-expansion anisotropy of orthorhombic martensite in the two-phase (α + β) titanium alloy

    Article • The Physics of Metals and Metallography, March 2017, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov

  36. Inhomogeneity of deformed state during compression testing of titanium implant

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Dr. Stepan I. Stepanov

  37. Determining the Young’s modulus of a cellular titanium implant by FEM simulation

    Article • January 2017, American Institute of Physics

    Dr. Stepan I. Stepanov

  38. Fracture surface analysis of a quenched (α+β)-metastable titanium alloy

    Article • January 2017, American Institute of Physics

    Dr. Stepan I. Stepanov

  39. Effect of low temperature thermomechanical treatment on the phase composition and properties of a two-phase titanium alloy

    Article • January 2016, American Institute of Physics

    Dr. Stepan I. Stepanov

  40. Effect of annealing on properties of hot-rolled electrical copper

    Article • The Physics of Metals and Metallography, April 2015, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov

  41. Structural and phase transformations in a quenched two-phase titanium alloy upon cold deformation and subsequent annealing

    Article • The Physics of Metals and Metallography, March 2015, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov

  42. Effect of quenching temperature on structure and properties of titanium alloy: Physicomechanical properties

    Article • The Physics of Metals and Metallography, May 2014, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov

  43. Effect of quenching temperature on structure and properties of titanium alloy: Structure and phase composition

    Article • The Physics of Metals and Metallography, May 2014, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov

  44. Formation of structure, phase composition and properties in biocompatible titanium alloy due to heat treatment

    Article • Metal Science and Heat Treatment, January 2011, Springer Science + Business Media

    Dr. Stepan I. Stepanov

  45. Effect of heat-treatment conditions on structural and phase transformations in a two-phase α + β titanium alloy subjected to thermomechanical treatment

    Article • The Physics of Metals and Metallography, June 2010, Pleiades Publishing Ltd

    Dr. Stepan I. Stepanov