All Stories

  1. Fatigue Life Estimation of Pressurized Pipelines Using XFEM: Elastic vs. Plastic Regimes
  2. Front Bumper Inclination on Vehicle Aerodynamic Performance: A Parametric Optimization Analysis
  3. NURBS Morphing Optimization of Drag and Lift in a Coupe-Class Vehicle Using Symmetry-Plane Comparison of Aerodynamic Performance
  4. Resplace of the Car–Driver–Passenger System in a Frontal Crash Using a Water Impact Attenuator
  5. Fuzzy-Based Control System for Solar-Powered Bulk Service Queueing Model with Vacation
  6. A Review of the Methods Used in the Study of Creep Behavior of Fiber-Reinforced Composites and Future Developments
  7. Performance Prediction of Store and Forward Telemedicine Using Graph Theoretic Approach of Symmetry Queueing Network
  8. Enhancing Efficient Data Transmission in IBM WebSphere Using Relational Data eXchange (RDX) Mechanism and Tandem Queue
  9. A Model to Study the Creep Behavior of Carbon Fiber/Epoxy Resin Composites Under Temperature
  10. Integrate the Isogeometric Analysis Approach Based on the T-Splines Function for the Numerical Study of a Liquefied Petroleum Gas (LPG) Cylinder Subjected to a Static Load
  11. Design and Calibration of a Sensory System of an Adaptive Gripper
  12. Enhancement of Thermomechanical Protocol for Automotive Brake Using the Symmetry of the Disc: Numerical Validation and Material Selection
  13. Finite Element Analysis of Functionally Graded Mindlin–Reissner Plates for Aircraft Tapered and Interpolated Wing Defluxion and Modal Analysis
  14. Analysis of Bulk Queueing Model with Load Balancing and Vacation
  15. Standard Deformations of Nonlinear Elastic Structural Elements with Power-Law Constitutive Model
  16. Numerical Study of an Automotive Crash Box in Carbon Fiber Reinforced Polymer Material Using Chang Failure Criteria
  17. Cost Optimization in Sintering Process on the Basis of Bulk Queueing System with Diverse Services Modes and Vacation
  18. Response of safety belt webbing used for formula student race car in a frontal collision
  19. Comparative Analysis of NURBS and Finite Element Method in Computational Fluid Dynamics Applications: Case Study on NACA 2412 Airfoil Aerodynamics
  20. Alternative Solution for Towing Systems Used in the Automotive Industry
  21. Flap and Wing Dynamics for a Light Sport Aircraft Analysis Using a Topological Model
  22. Use of New and Light Materials in Automotive Engineering for Towing System
  23. D’Alembert–Lagrange Principle in Symmetry of Advanced Dynamics of Systems
  24. The Properties of Structures with Two Planes of Symmetry
  25. Modern Dimensional Analysis Model Laws Used to Model Additive Manufacturing Processes
  26. Numerical Analysis of the Cylindrical Shell Pipe with Preformed Holes Subjected to a Compressive Load Using Non-Uniform Rational B-Splines and T-Splines for an Isogeometric Analysis Approach
  27. X-IGA Used for Orthotropic Material Crack Growth
  28. Multiscale assessment of artificial aging treatment of polysaccharides from tonewood species
  29. The Quick Determination of a Fibrous Composite’s Axial Young’s Modulus via the FEM
  30. Modeling a Milling Dynamometer as a 3DOF Dynamic System by Stiffness Identification
  31. Calculation of Homogenized Mechanical Coefficients of Fiber-Reinforced Composite Using Finite Element Method
  32. Numerical Study of Crack Prediction and Growth in Automotive Wheel Rims
  33. Elastic Constants of Polymeric Fiber Composite Estimation Using Finite Element Method
  34. Estimation of Axial Young’s Modulus of Fibrous Composites Using Finite Element Analysis
  35. On a composite obtained by a mixture of a dipolar solid with a Moore–Gibson–Thompson media
  36. Vibration analysis of metallic structure of an innovative dam gate
  37. Gibbs–Appell Equations in Finite Element Analysis of Mechanical Systems with Elements Having Micro-Structure and Voids
  38. Analysis of Structures with Three Identical Parts
  39. Predicting Stress Intensity Factor for Aluminum 6062 T6 Material in L-Shaped Lower Control Arm (LCA) Design Using Extended Finite Element Analysis
  40. Three-Point Safety Polymeric Belt Webbing versus Four-Point Belt for a Race Car in Frontal Crashes
  41. Equivalent analytical formulation-based multibody elastic system analysis using one-dimensional finite elements
  42. A Mixed Finite Element Approximation for Time-Dependent Navier–Stokes Equations with a General Boundary Condition
  43. The Effect of Vibrations from Racing Cars on the Human Body in FORMULA STUDENT Races
  44. Finite-Element-Analysis-Based Study of a Failure Phenomenon in HDPE Pipes
  45. An Isogeometric Over-Deterministic Method (IG-ODM) to Determine Elastic Stress Intensity Factor (SIF) and T-Stress
  46. Analytical mechanics methods in finite element analysis of multibody elastic system
  47. Two-Dimensional Equivalent Models in the Analysis of a Multibody Elastic System Using the Finite Element Analysis
  48. Dimensional Methods Used in the Additive Manufacturing Process
  49. Flow of Newtonian Incompressible Fluids in Square Media: Isogeometric vs. Standard Finite Element Method
  50. On Schwartz–Villat’s formula for analytic functions
  51. Mixed Isogeometric Analysis of the Brinkman Equation
  52. Efficiency of Numerical Control Programs using Predefined Cycles for Automatic Symmetric Tool Path Calculation
  53. Experimental Investigations of the Dental Filling Materials: Establishing Elastic Moduli and Poisson’s Ratios
  54. Some results on eigenvalue problems in the theory of piezoelectric porous dipolar bodies
  55. A Posteriori Error Estimators for the Quasi-Newtonian Stokes Problem with a General Boundary Condition
  56. An extension of Almansi’s problem for orthotropic elastic beams
  57. Modern Dimensional Analysis-Based Heat Transfer Analysis: Normalized Heat Transfer Curves
  58. On evolution of finite energy solutions for a Cosserat thermoelastic body
  59. Creativity and Generation of Ideas in the Design of Children’s Toys
  60. Impact Attenuator Design for Improvement of Racing Car Drivers’ Safety
  61. Mathematics in Finite Element Modeling of Computational Friction Contact Mechanics 2021–2022
  62. Modeling Study of the Creep Behavior of Carbon-Fiber-Reinforced Composites: A Review
  63. On mixed problem in thermoelasticity of type III for Cosserat media
  64. Modern Dimensional Analysis Based on Fire-Protected Steel Members’ Analysis Using Multiple Experiments
  65. Symmetry in Applied Continuous Mechanics 2022
  66. Thermal Conductivity Study of an Orthotropic Medium Containing a Cylindrical Cavity
  67. Dynamic Absorption of Vibration in a Multi Degree of Freedom Elastic System
  68. A model of dual-phase-lag thermoelasticity for a Cosserat body
  69. CFD Model Studies of Dust Dispersion in Driven Dog Headings
  70. Dental Implant and Natural Tooth Micro-Movements during Mastication—In Vivo Study with 3D VIC Method
  71. A New Approach in Heat Transfer Analysis: Reduced-Scale Straight Bars with Massive and Square-Tubular Cross-Sections
  72. Effects of Seat Belts and Shock Absorbers on the Safety of Racing Car Drivers
  73. On some qualitative results in thermodynamics of Cosserat bodies
  74. Modern Dimensional Analysis Involved in Polymers Additive Manufacturing Optimization
  75. Modern Dimensional Analysis-Based Steel Column Heat Transfer Evaluation Using Multiple Experiments
  76. New Adder and Distribution Gearbox Used in the Transmission of the Heavy Truck
  77. On Energy Release Rate for Propagation of a Straight Crack in a Cosserat Elastic Body
  78. Three-Dimensional Printing Component Used in Rehabilitation Exoskeleton
  79. Experimental and Numerical Studies of the Heat Transfer in Thin-Walled Rectangular Tubes under Fire
  80. Aspects Regarding the Innovative Conceptual Design for Children’s Recreational Areas
  81. New Tribological Aspects in the Micro-Areas of the Symmetric Rolling-Sliding Contact
  82. Queueing Theory-Based Mathematical Models Applied to Enterprise Organization and Industrial Production Optimization
  83. Matrix formalism used to describe the inertial properties in multibody dynamics
  84. Generalized Gibbs–Appell’s equations and two-dimensional finite elements model used in flexible multibody analysis
  85. Generalized Thermoelastic Interaction in a Half-Space under a Nonlocal Thermoelastic Model
  86. Some results on the electroacoustic energy flux for micropolar bodies
  87. Dynamic Response of the Inertial Platform of the Laser ELI-NP Magurele-Bucharest Facility
  88. Thermoelastic Analysis in Poro-Elastic Materials Using a TPL Model
  89. T-Stress Evaluation Based Cracking of Pipes Using an Extended Isogeometric Analysis (X-IGA)
  90. Analysis of Thermoelastic Interaction in a Polymeric Orthotropic Medium Using the Finite Element Method
  91. Experimental study of the valve rotation in a valvetrain car engine
  92. New Formulations on Kinetic Energy and Acceleration Energies in Applied Mechanics of Systems
  93. Some results on stability and continuous dependence in Green-Naghdi thermoelasticity of Cosserat bodies
  94. Dynamic Behavior of the Inertial Platform Related to the Research Facility Building Laser and Gamma at ELI-NP Bucharest
  95. Elastic response of a hollow cylinder with voids and micropolar structure
  96. Modern Method to Analyze the Heat Transfer in a Symmetric Metallic Beam with Hole
  97. Stress–Strain Field in an Innovative Metallic Dam Gate Used to Control the Water Flow
  98. An extension of the Hamilton variational principle for piezoelectric bodies with dipolar structure
  99. Some Results in the Theory of a Cosserat Thermoelastic Body with Microtemperatures and Inner Structure
  100. "On instability in the theory of dipolar bodies with two-temperatures"
  101. A Vibration Analysis of the Rubber Inertial Dampers Used in Electrical Vehicles
  102. A final boundary problem for modeling a thermoelastic Cosserat body
  103. Experimental Validation of Model Heat Transfer in Rectangular Hole Beams Using Modern Dimensional Analysis
  104. Finite Element Method-Based Elastic Analysis of Multibody Systems: A Review
  105. Numerical Study of the Bond Strength Evolution of Corroded Reinforcement in Concrete in Pull-Out Tests
  106. An Analysis of the Inertial Platform Behavior of the ELI-NP Project in Case of an Earthquake
  107. Calculation Program for an Elastic Coupling with Bolts and Non-metallic Elements from Natural Rubber
  108. Tracking and Monitoring of the Alignment System Used for Nuclear Physics Experiments
  109. Fracture Modelling of a Cracked Pressurized Cylindrical Structure by Using Extended Iso-Geometric Analysis (X-IGA)
  110. Adder Box Used in the Heavy Trucks Transmission Noise Reduction
  111. Use of the Symmetries in the Study of Vibration Response of a Hollow Cylinder
  112. Determination of Reactivity Ratios from Binary Copolymerization Using the k-Nearest Neighbor Non-Parametric Regression
  113. Influence of B4C and industrial waste fly ash reinforcement particles on the micro structural characteristics and mechanical behavior of aluminium (Al–Mg–Si-T6) hybrid metal matrix composite
  114. Effect of Voids and Internal State Variables in Elasticity of Porous Bodies with Dipolar Structure
  115. Finite Element Method-Based Dynamic Response of Micropolar Polymers with Voids
  116. The Influence of Voids in the Vibrations of Bodies with Dipolar Structure
  117. A reciprocal relation with application in the study of the dislocations
  118. Video Image Correlation-Based Method Used for the Study of the Torsional Vibrations of an Adder Gearbox
  119. A Mixed Iteration Method to Determine the Linear Material Parameters in the Study of Creep Behavior of the Composites
  120. Using the Stochastic Gradient Descent Optimization Algorithm on Estimating of Reactivity Ratios
  121. Existence and uniqueness of a finite energy solution for the mixed value problem of porous thermoelastic bodies
  122. Thermal Scaling of Transient Heat Transfer in a Round Cladded Rod with Modern Dimensional Analysis
  123. Multibody Systems with Flexible Elements
  124. A Kinematical Analysis of the Flap and Wing Mechanism of a Light Sport Aircraft Using Topological Models
  125. Study of Metallic Housing of the Adder Gearbox to Reduce the Noise and to Improve the Design Solution
  126. Experimental Dynamic Rigidity of an Elastic Coupling with Bolts
  127. Study of structures made of composite materials used in automotive industry
  128. Composite Structures with Symmetry
  129. Vibration Properties of a Concrete Structure with Symmetries Used in Civil Engineering
  130. Finite Element Method-Based Simulation Creep Behavior of Viscoelastic Carbon-Fiber Composite
  131. Creep Response of Carbon-Fiber-Reinforced Composite Using Homogenization Method
  132. Qualitative results in thermoelasticity of type III for dipolar bodies
  133. Vibration Response of a Concrete Structure with Repetitive Parts Used in Civil Engineering
  134. A New Optimized Solution for a Flexible Coupling with Bolts Used in the Mechanical Transmissions
  135. The mixed problem in the theory of strain gradient thermoelasticity approached with the Lagrange identity
  136. Design and Analysis of Inertial Platform Insulation of the ELI-NP Project of Laser and Gamma Beam Systems
  137. Mori–Tanaka Formalism-Based Method Used to Estimate the Viscoelastic Parameters of Laminated Composites
  138. Creep Response of Neat and Carbon-Fiber-Reinforced PEEK and Epoxy Determined Using a Micromechanical Model
  139. Determination of Young’s Moduli of the Phases of Composite Materials Reinforced with Longitudinal Fibers, by Global Measurements
  140. Degradation of Mechanical Properties of Pine Wood Under Symmetric Axial Cyclic Loading Parallel to Grain
  141. New Analytical Model Used in Finite Element Analysis of Solids Mechanics
  142. Behavior of energies in strain gradient thermoelasticity of bodies with microtemperatures
  143. Gibbs–Appell method-based governing equations for one-dimensional finite elements used in flexible multibody systems
  144. Experimental Assessments on the Evaluation of Wire Rope Characteristics as Helical Symmetrical Multi-body Ensembles
  145. On a free boundary value problem for the anisotropic N-Laplace operator on an N−dimensional ring domain
  146. Kane’s Formalism Used to the Vibration Analysis of a Wind Water Pump
  147. New analytical method based on dynamic response of planar mechanical elastic systems
  148. Kane’s Method-Based Simulation and Modeling Robots with Elastic Elements, Using Finite Element Method
  149. Frequency Response Evaluation of Guitar Bodies with Different Bracing Systems
  150. Maggi’s Equations Used in the Finite Element Analysis of the Multibody Systems with Elastic Elements
  151. Some Backward in Time Results for Thermoelastic Dipolar Structures
  152. Study on the Mechanical Responses of Plastic Pipes Made of High Density Polyethylene (HDPE) in Water Supply Network
  153. Energy of Accelerations Used to Obtain the Motion Equations of a Three- Dimensional Finite Element
  154. A Study of Deformations in a Thermoelastic Dipolar Body with Voids
  155. Mechanical design of interaction chamber for the ELIADE array at ELI-NP
  156. A New Approach in Analytical Dynamics of Mechanical Systems
  157. Methods to Determine the Mechanical Properties of Composite Materials with Continuous Fibers
  158. Reliability Study on PUR Injection Machine
  159. On the decay of exponential type for the solutions in a dipolar elastic body
  160. New analytical formalisms used in finite element analysis of robots with elastic elements
  161. Image Correlation to Predict the Gait Recovery of Patients in the Post-Surgery Period
  162. The Use of Structural Symmetries of a U12 Engine in the Vibration Analysis of a Transmission
  163. Symmetry in Applied Continuous Mechanics
  164. Finite element analysis of an elbow tube in concrete anchor used in water supply networks
  165. Hysteretically Symmetrical Evolution of Elastomers-Based Vibration Isolators within α-Fractional Nonlinear Computational Dynamics
  166. On the Partition of Energies for the Backward in Time Problem of Thermoelastic Materials with a Dipolar Structure
  167. Vibration Analysis of a Guitar considered as a Symmetrical Mechanical System
  168. About finite energy solutions in thermoelasticity of micropolar bodies with voids
  169. Thermoelasticity of Initially Stressed Bodies with Voids: A Domain of Influence
  170. On vibrations in Green-Naghdi thermoelasticity of dipolar bodies
  171. Eigenvalue and Eigenvector Problems in Applied Mechanics
  172. Impact of extraction agents in mold part for PUR injection
  173. Matrices
  174. Quadratic Forms
  175. Modal Analysis
  176. Dynamical Systems
  177. Vectors
  178. Rigid Body Mechanics
  179. Strain and Stress
  180. Motion equation for a flexible one-dimensional element used in the dynamical analysis of a multibody system
  181. Minimum Principle for a Composite Modeled as Two Interacting Dipolar Continua
  182. Improved rigidity of composite circular plates through radial ribs
  183. A dipolar structure in the heat-flux dependent thermoelasticity
  184. Methods to Determine the Mechanical Properties of Composite Materials with Continuous Fibers
  185. Advanced high-density polyethylene used in pipelines networks
  186. Optical analysis of the reaction chamber for the ELIADE array
  187. Dynamic Analysis of the Reaction Chamber for the ELIADE Array
  188. Universal Absorber Applied to NVH in EV’s Powertrain
  189. Considerations of the transverse vibration of a mechanical system with two identical bars
  190. Temperature distribution of the straight bar, fixed into a heated plane surface
  191. Mathematical model for studying cyclist kinematics in vehicle-bicycle frontal collisions
  192. Coupled transverse and torsional vibrations in a mechanical system with two identical beams
  193. Effect of microtemperatures for micropolar thermoelastic bodies
  194. Effect of internal state variables in thermoelasticity of microstretch bodies
  195. Matrix Strain Increase Factors in Unidirectional Fibers-Reinforced Laminae
  196. Considerations on double porosity structure for micropolar bodies
  197. Innovative Solution of Vertical Axis Wind Turbine, Suitable for Naval Industry Implementation (Numerical Methods and Analythical Calculus)
  198. Innovative Solutions for Portable Wind Turbines, Used on Ships
  199. The Intumescent Paint Layers Thickness Influence on the Load-Bearing Capacity of the Steel Joints
  200. Micromechanical Based Simulation and Experimental Approaches in the Thermal Conductivities Assessment of Hybrid Polymeric Composite Materials
  201. Some Properties of Motion Equations Describing the Nonlinear Dynamical Response of a Multibody System with Flexible Elements
  202. Homogenization and averaging methods to predict elastic properties of pre-impregnated composite materials
  203. A Method of Eliminating Lagrangian Multipliers from the Equation of Motion of Interconnected Mechanical Systems
  204. Elimination of lagrangian multipliers