All Stories

  1. Characterizations of Cladded 6082-T6 Aluminum Alloy Through Hard Anodizing
  2. Microstructural characterization of different metal matrix composite claddings reinforced by TiC through YAG laser cladding
  3. A novel modified re-entrant honeycomb structure to enhance the auxetic behavior: Analytical and numerical study by FEA
  4. Laser surface cladding of mild steel with 316L stainless steel for anti-corrosion applications
  5. Optimization of nickel nanoparticles concentration for biogas enhancement from green algae anaerobic digestion
  6. The investigation of the fatigue failure of nickel-based superalloy 718 choke valve stems used in offshore subsea water injection service
  7. Simulation of blended nonlinear hydrodynamics forces using radial basis function in uniform moving frame
  8. Piezoelectric Metamaterial with Negative and Zero Poisson’s Ratios
  9. Gear misalignment diagnosis using statistical features of vibration and airborne sound spectrums
  10. Conceptual Design of Composite Sandwich Structure Submarine Radome
  11. Conjoint effect of microwave irradiation and metal nanoparticles on biogas augmentation from anaerobic digestion of green algae
  12. Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling
  13. Prediction of Crack Depth and Fatigue Life of an Acrylonitrile Butadiene Styrene Cantilever Beam Using Dynamic Response
  14. Instant Dynamic Response Measurements for Crack Monitoring in Metallic Beams
  15. Combining Microwave Pretreatment with Iron Oxide Nanoparticles Enhanced Biogas and Hydrogen Yield from Green Algae
  16. Frequency and Amplitude Measurement of A Cantilever Beam Using Image Processing : With A Feedback System
  17. A methodology for flexibility analysis of pipeline systems
  18. Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy
  19. A novel test configuration design method for inverse identification of in-plane moduli of a composite plate under the PFEUM framework
  20. Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review
  21. Effect of hybrid reinforcement on the performance of filament wound hollow shaft
  22. A methodology for flexibility analysis of process piping
  23. Overall equipment effectiveness of tyre curing press: a case study
  24. A Projected Finite Element Update Method for Inverse Identification of Material Constitutive Parameters in transversely Isotropic Laminates
  25. Micromechanical modeling of 8-harness satin weave glass fiber-reinforced composites
  26. Mechanical properties of a novel plymetal manufactured by laser-assisted direct metal deposition
  27. Response of Gaussian-modulated guided wave in aluminum: An analytical, numerical, and experimental study
  28. Effective thermal conductivity of two-phase composites containing highly conductive inclusions
  29. Assessment of material properties of AISI 316L stainless steel using non-destructive testing
  30. Comparison of ANN and finite element model for the prediction of thermal stresses in diode laser cutting of float glass
  31. Image based portable wear debris analysis tool
  32. Mechanical fatigue in aluminium at elevated temperature and remaining life prediction based on natural frequency evolution
  33. Mechanical properties in tensile loading of H13 re-entrant honeycomb auxetic structure manufactured by direct metal deposition
  34. Comparison of Cut Path Deviation Between CO2 and Diode Lasers in Float-Glass Cutting
  35. Measurement of thermal diffusivity for alumina borosilicate glass bearing TRISO fuel particles: experiment and modelling correlation
  36. Characteristics of γ-Al2O3 nanoparticles generated by continuous-wave laser ablation in liquid
  37. Generation of metal-oxide nanoparticles using continuous-wave fibre laser ablation in liquid
  38. Generation and characterization of NiO nanoparticles by continuous wave fiber laser ablation in liquid
  39. Generation of titanium-oxide nanoparticles in liquid using a high-power, high-brightness continuous-wave fiber laser
  40. Efficient generation of titanium oxide nanomaterials using a continuous wave high-power fibre laser