All Stories

  1. Evaluating the impact of the tool and additional fruit cutting on changes of pitted cherries using digital volume correlation with computed tomography

    Article • Advances in Science and Technology – Research Journal, November 2025, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Slawomir Blasiak, PhD Piotr Kurp

  2. Evaluation of Surface Roughness Reduction in TPU 95A Samples Using Ferromagnetic Liquid Machining

    Article • Materials, October 2025, MDPI AG

    Slawomir Blasiak

  3. The Fractional Order PID Controller for the 3-DOF Gyroscope System

    Article • Applied Sciences, September 2025, MDPI AG

    Slawomir Blasiak

  4. Experimental–Analytical Method for Determining the Dynamic Coefficients of Turning Tools

    Article • Materials, January 2025, MDPI AG

    Slawomir Blasiak

  5. A Method for Determining the Minimum Thickness of the Cut Layer in Precision Milling

    Article • Materials, January 2025, MDPI AG

    Slawomir Blasiak

  6. 3D/4D Printing in Advanced Robotics Systems—Recent Developments and Applications

    Article • Sustainability, December 2024, MDPI AG

    Slawomir Blasiak

  7. The Influence of Insert Mounting Errors on the Surface Roughness of 1.0503 Steel in Face Milling

    Article • Materials, December 2024, MDPI AG

    Slawomir Blasiak

  8. Analytical Solutions of the 3-DOF Gyroscope Model

    Article • Electronics, May 2024, MDPI AG

    Slawomir Blasiak

  9. Effect of shells number and machining on selected properties of 3D-printed PLA samples

    Article • Polimery, April 2024, Industrial Chemistry Research Institute

    Slawomir Blasiak

  10. Pits Transporting System from Pitter Fruit Machine - Case Study

    Article • Communications - Scientific letters of the University of Zilina, March 2024, University of Zilina

    Slawomir Blasiak, PhD Piotr Kurp

  11. Influence of Machining on Selected Tensile Properties of MEX-Produced PETG Materials

    Article • January 2024, Springer Science + Business Media

    Slawomir Blasiak

  12. Influence of the Relative Displacements and the Minimum Chip Thickness on the Surface Texture in Shoulder Milling

    Article • Materials, December 2023, MDPI AG

    Slawomir Blasiak

  13. 3D/4D Printing in Advanced Robotics Systems—Recent Developments and Applications

    Article • July 2023, MDPI AG

    Slawomir Blasiak

  14. Analyzing the Potential of Drill Bits 3D Printed Using the Direct Metal Laser Melting (DMLM) Technology to Drill Holes in Polyamide 6 (PA6)

    Article • Materials, April 2023, MDPI AG

    Slawomir Blasiak

  15. Influence of the Milling Conditions of Aluminium Alloy 2017A on the Surface Roughness

    Article • Materials, May 2022, MDPI AG

    Slawomir Blasiak

  16. Geometry, Structure and Surface Quality of a Maraging Steel Milling Cutter Printed by Direct Metal Laser Melting

    Article • Materials, January 2022, MDPI AG

    Slawomir Blasiak

  17. Heat Transfer Analysis for Non-Contacting Mechanical Face Seals Using the Variable-Order Derivative Approach

    Article • Energies, September 2021, MDPI AG

    Slawomir Blasiak

  18. Rapid Prototyping of Pneumatic Directional Control Valves

    Article • Polymers, April 2021, MDPI AG

    Slawomir Blasiak

  19. Influence of the Cutting Strategy on the Temperature and Surface Flatness of the Workpiece in Face Milling

    Article • Materials, October 2020, MDPI AG

    Slawomir Blasiak

  20. Influence of Thermoelastic Phenomena on the Energy Conservation in Non-Contacting Face Seals

    Article • Energies, October 2020, MDPI AG

    Slawomir Blasiak

  21. Influence of Thermoelastic Phenomena on the Energy Conservation in Non-contacting Face Seals

    Article • September 2020, MDPI AG

    Slawomir Blasiak

  22. Stress Relaxation and Creep of a Polymer-Aluminum Composite Produced through Selective Laser Sintering

    Article • Polymers, April 2020, MDPI AG

    Slawomir Blasiak

  23. THE CREEP OF MATERIAL OBTAINED USING SLS TECHNOLOGY

    Article • MM Science Journal, March 2020, MM Publishing, s.r.o.

    Slawomir Blasiak

  24. Fractional relaxation model of materials obtained with selective laser sintering technology

    Article • Rapid Prototyping Journal, January 2019, Emerald

    Slawomir Blasiak

  25. Numerical modelling and comparison analysis of pressure distribution in the gas film for non-contacting face seals

    Article • EPJ Web of Conferences, January 2019, EDP Sciences

    Slawomir Blasiak

  26. Numerical modeling and analysis of the noncontacting impulse gas face seals

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, December 2018, SAGE Publications

    Slawomir Blasiak

  27. Model and experimental research of pneumatic artificial muscles

    Article • May 2018, Ustav Teoreticke a Aplikovane Mechaniky AC CR

    Slawomir Blasiak

  28. Time-Fractional Fourier Law in a finite hollow cylinder under Gaussian-distributed heat flux

    Article • EPJ Web of Conferences, January 2018, EDP Sciences

    Slawomir Blasiak

  29. Numerical analysis of the non-contacting gas face seals

    Article • IOP Conference Series Materials Science and Engineering, August 2017, Institute of Physics Publishing

    Slawomir Blasiak

  30. Experimental and simulation flow rate analysis of the 3/2 directional pneumatic valve

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  31. Study of the effect of temperature on the positioning accuracy of the pneumatic muscles

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  32. Determination of the temperature distribution in a minichannel using ANSYS CFX and a procedure based on the Trefftz functions

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  33. Model tests of wind turbine with a vertical axis of rotation type Lenz 2

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  34. The influence of physical properties of materials used for slide rings on the process of heat transfer in the non-contacting face seals

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  35. Aerodynamics simulation studies on the observation head placed on a board of the unmanned aerial vehicle

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  36. Influence of the cutting parameters on the workpiece temperature during face milling

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Slawomir Blasiak

  37. Flow-rate characteristics and parameters of piezo valves

    Article • EPJ Web of Conferences, January 2017, EDP Sciences

    Jakub Takosoglu, Slawomir Blasiak

  38. Time-fractional heat transfer equations in modeling of the non-contacting face seals

    Article • International Journal of Heat and Mass Transfer, September 2016, Elsevier

    Slawomir Blasiak

  39. Determining the Static Characteristics of Pneumatic Muscles

    Article • Measurement and Control, March 2016, SAGE Publications

    Jakub Takosoglu, Slawomir Blasiak

  40. A parametric and dynamic analysis of non-contacting gas face seals with modified surfaces

    Article • Tribology International, February 2016, Elsevier

    Slawomir Blasiak, Dr. Andriy Zahorulko

  41. Numerical calculations of the thermal deformations of the rectangular minichannel walls

    Article • EPJ Web of Conferences, January 2016, EDP Sciences

    Prof. Magdalena Piasecka, Slawomir Blasiak

  42. Direct and inverse heat transfer in non-contacting face seals

    Article • International Journal of Heat and Mass Transfer, November 2015, Elsevier

    Slawomir Blasiak

  43. Design of a 3-DOF tripod electro-pneumatic parallel manipulator

    Article • Robotics and Autonomous Systems, October 2015, Elsevier

    Slawomir Blasiak

  44. An analytical approach to heat transfer and thermal distortions in non-contacting face seals

    Article • International Journal of Heat and Mass Transfer, February 2015, Elsevier

    Slawomir Blasiak

  45. The two dimensional thermohydrodynamic analysis of a lubrication in non-contacting face seals

    Article • Journal of Thermal Science and Technology, January 2015, Japan Society of Mechanical Engineers

    Slawomir Blasiak

  46. Heat transfer and thermal deformations in non-contacting face seals

    Article • Journal of Thermal Science and Technology, January 2014, Japan Society of Mechanical Engineers

    Slawomir Blasiak

  47. Parametric analysis of heat transfer in non-contacting face seals

    Article • International Journal of Heat and Mass Transfer, January 2013, Elsevier

    Slawomir Blasiak

  48. A fuzzy logic controller for the positioning control of an electro-pneumatic servo-drive

    Article • Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering, September 2012, SAGE Publications

    Slawomir Blasiak

  49. A Numerical Analysis of the Grooved Surface Effects on the Thermal Behavior of a Non-Contacting Face Seal

    Article • Procedia Engineering, January 2012, Elsevier

    Slawomir Blasiak

  50. A Numerical Analysis of the Temperature Distributions in Face Sealing Rings

    Article • Procedia Engineering, January 2012, Elsevier

    Slawomir Blasiak