All Stories

  1. Enhancing Strength and Impact Resistance of Latex Rubberized Concrete through Steel Fiber Incorporation
  2. Effects of Moisture Content and Temperature on Microwave Measurement of Lightweight Foamed Concrete
  3. Feasible use of ureolytic bacteria in lightweight foamed concrete to enhance its strength
  4. Effect of Pre-Soaking Treatment Method of Plant-Based Aggregate on the Properties of Lightweight Concrete—Preliminary Study
  5. Effect of Pre-Soaking Treatment Method on Plant-Based Aggre-Gate for Production of High-Strength Lightweight Concrete
  6. High strength concrete with crumb rubber as partial of aggregate.
  7. Lightweight ferrocement product.
  8. Mechanical Properties of Lightweight Foamed Concrete With Ceramic Tile Wastes as Partial Cement Replacement Material
  9. A comparison study on Australia, Eurocode, and US reinforced concrete structure repair codes
  10. An investigation on the performance of 1200 kg/m3 lightweight foamed concrete incorporated with calcium stearate
  11. Mechanical and Thermal Properties of Synthetic Polypropylene Fiber–Reinforced Renewable Oil Palm Shell Lightweight Concrete
  12. Determination of density and compressive strength of lightweight foamed concrete using frequency domain approach
  13. Acoustic Properties of Lightweight Foamed Concrete with Eggshell Waste as Partial Cement Replacement Material
  14. Experimental and Numerical Study on the Effect of Heel Plate Length and Thickness on the Structural Integrity of Cold-formed Steel Roof Trusses
  15. Environmental impact and quality assessment of using eggshell powder incorporated in lightweight foamed concrete
  16. Feasibility of Packaged Interferometric Photonics Micro-Taper Sensor for Cold-Formed Steel Roof Truss Structural Health Monitoring
  17. Behaviour of kenaf fibre reinforced composite
  18. Frequency spectrum analysis of lightweight foamed concrete using microwave dielectric measurement technique
  19. Experimental study on the effect of heel plate thickness on the structural integrity of cold-formed steel roof trusses
  20. Simultaneous Sensing of Mach-Zehnder Interferometer Optical Sensor Arrays Using Spatial Division Multiplexing
  21. Feasibility use of in-line Mach–Zehnder interferometer optical fibre sensor in lightweight foamed concrete structural beam on curvature sensing and crack monitoring
  22. The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite
  23. EFFECT OF FILLER ON STRENGTH DEVELOPMENT OF EPOXY GROUT
  24. ENGINEERING PROPERTIES OF HIGH VOLUME SLAG CEMENT GROUT IN TROPICAL CLIMATE
  25. Compressive Strength and Dimensional Stability of Palm Oil Empty Fruit Bunch Fibre Reinforced Foamed Concrete
  26. Strength Performance on Different Mix of Cement-Sand Ratio and Sand Condition for Lightweight Foamed Concrete
  27. Engineering Properties of 1200 kg/m³ Lightweight Foamed Concrete with Egg Shell Powder as Partial Replacement Material of Cement
  28. Experimental Study on the Effect of Heel Plate Length on the Structural Integrity of Cold-formed Steel Roof Trusses
  29. Flexural Behaviour of Reinforced Lightweight Foamed Mortar Beams and Slabs
  30. Utilizing high volumes quarry wastes in the production of lightweight foamed concrete
  31. Strength Properties of Foamed Concrete Containing Crushed Steel Slag as Partial Replacement of Sand with Specific Gradation
  32. Performance of mechanical behavior of kenaf fibre reinforced foamed composite
  33. Enhancement of durability properties of heat-treated oil palm shell species lightweight concrete
  34. Packaged in-line Mach–Zehnder interferometer for highly sensitive curvature and flexural strain sensing
  35. Addendum: Zhao, X.; et al. Properties of Foamed Mortar Prepared with Granulated Blast-furnace Slag. Materials 2015, 8(2), 462-473
  36. Flexural Behaviour of Reinforced Slab Panel System with Embedded Cold-formed Steel Frames as Reinforcement
  37. Properties of Foamed Mortar Prepared with Granulated Blast-Furnace Slag
  38. Unconfined compressive strength of PET waste-mixed residual soils
  39. Strength and toughness of lightweight foamed concrete with different sand grading
  40. Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler
  41. Effect of different sand grading on strength properties of cement grout
  42. Strength properties of self-compacting mortar mixed with GGBFS
  43. Thermal insulation performance of aerated lightweight concrete
  44. Ground-Granulated Blast-Furnace Slag as Potential Filler in Polyester Grout: Compressive Strength Development
  45. Long-term strength of rubberised concrete paving blocks
  46. Using recycled waste tyres in concrete paving blocks
  47. GGBFS as potential filler in polyester grout: Flexural strength and toughness