All Stories

  1. Ceramic vs polymeric membrane implementation for potable water treatment
  2. The status of potable water reuse implementation
  3. Low-pressure membrane technology for potable water filtration: true costs
  4. Sorptive removal of disinfection by-product precursors from UK lowland surface waters: Impact of molecular weight and bromide
  5. An empirical determination of the whole-life cost of FO-based open-loop wastewater reclamation technologies
  6. Industrial effluent treatment with immersed MBRs: treatability and cost
  7. THM and HAA formation from NOM in raw and treated surface waters
  8. Carbonaceous and nitrogenous disinfection by-product formation from algal organic matter
  9. Influence of composite particle formation on the performance and economics of grit removal
  10. The status of industrial and municipal effluent treatment with membrane bioreactor technology
  11. Optimization of cultivation conditions for combined nutrient removal and CO2fixation in a batch photobioreactor
  12. A mathematical model for carbon fixation and nutrient removal by an algal photobioreactor
  13. Investigating the significance of coagulation kinetics on maintaining membrane permeability in an MBR following reactive coagulant dosing
  14. The impact of mechanical shear on membrane flux and energy demand
  15. Ceramic membrane filtration of produced water: Impact of membrane module
  16. Synergistic effects and optimization of nitrogen and phosphorus concentrations on the growth and nutrient uptake of a freshwater Chlorella vulgaris
  17. Pre-treatment of surface waters for ceramic microfiltration
  18. Pilot-scale spiral wound membrane assessment for THM precursor rejection from upland waters
  19. Acidified and ultrafiltered recovered coagulants from water treatment works sludge for removal of phosphorus from wastewater
  20. Coagulant recovery and reuse for drinking water treatment
  21. Algal remediation of CO2 and nutrient discharges: A review
  22. Removal of disinfection by-product precursors by coagulation and an innovative suspended ion exchange process
  23. The cost of a small membrane bioreactor
  24. THM precursor rejection by UF membranes treating Scottish surface waters
  25. The size and performance of offshore produced water oil-removal technologies for reinjection
  26. Biological treatment and thickening with a hollow fibre membrane bioreactor
  27. Reuse of recovered coagulants in water treatment: An investigation on the effect coagulant purity has on treatment performance
  28. Micropollutant removal by advanced oxidation of microfiltered secondary effluent for water reuse
  29. Biomass properties and permeability in an immersed hollow fibre membrane bioreactor at high sludge concentrations
  30. Coagulant Recovery from Water Treatment Residuals: A Review of Applicable Technologies
  31. The application of microfiltration-reverse osmosis/nanofiltration to trace organics removal for municipal wastewater reuse
  32. Reproducibility and applicability of the flux step test for a hollow fibre membrane bioreactor
  33. NDMA formation in secondary wastewater effluent
  34. Wastewater polishing using membrane technology: a review of existing installations
  35. Granular activated carbon for removal of organic matter and turbidity from secondary wastewater
  36. Powdered Activated Carbon-Microfiltration for Waste-Water Reuse
  37. The cost and performance of an MF-RO/NF plant for trace metal removal
  38. Permeability and clogging in an immersed hollow fibre membrane bioreactor
  39. Efficacy of relaxation, backflushing, chemical cleaning and clogging removal for an immersed hollow fibre membrane bioreactor
  40. Influence of backwashing, flux and temperature on microfiltration for wastewater reuse
  41. Economical Evaluation and Operating Experiences of a Small-Scale MBR for Nonpotable Reuse
  42. An economic assessment of coagulant recovery from water treatment residuals
  43. Precoagulation-microfiltration for wastewater reuse
  44. Impact of membrane configuration on fouling in anaerobic membrane bioreactors
  45. Fate and removal of permethrin by conventional activated sludge treatment
  46. Membrane life estimation in full-scale immersed membrane bioreactors
  47. Optimisation of MF membrane cleaning protocol in an Indirect Potable Reuse (IPR) scheme
  48. Modelling the energy demands of aerobic and anaerobic membrane bioreactors for wastewater treatment
  49. Screening optimisation for indirect potable reuse
  50. Membrane bioreactors: Two decades of research and implementation
  51. Optimising operation of an integrated membrane system (IMS) — A Box–Behnken approach
  52. The determination and origin of fibre clogging in membrane bioreactors
  53. Experimental evaluation of intermittent aeration of a hollow fibre membrane bioreactor
  54. BSM-MBR: A benchmark simulation model to compare control and operational strategies for membrane bioreactors
  55. Comparison of dead-end and continuous filtration conditions in a denitrification membrane bioreactor
  56. Occurrence and fate of pharmaceutical and personal care products in a sewage treatment works
  57. The cost of a large-scale hollow fibre MBR
  58. Model-based energy optimisation of a small-scale decentralised membrane bioreactor for urban reuse
  59. Fate and behaviour of copper and zinc in secondary biological wastewater treatment processes: I Evaluation of biomass adsorption capacity
  60. Fate and behaviour of copper and zinc in secondary biological wastewater treatment processes: II Removal at varying sludge age
  61. Evaluation of intermittent air sparging in an anoxic denitrification membrane bioreactor
  62. Criticality of Flux and Aeration for a Hollow Fiber Membrane Bioreactor
  63. The Commercial Status of Membrane Bioreactors for Municipal Wastewater
  64. Chemical cleaning of potable water membranes: The cost benefit of optimisation
  65. Chemical cleaning of potable water membranes: A review
  66. The fate of metals in wastewater treated by the activated sludge process and membrane bioreactors: A brief review
  67. Fate and impact of organics in an immersed membrane bioreactor applied to brine denitrification and ion exchange regeneration
  68. Microfiltration membrane plant start up: A case study with autopsy and permeability recovery analysis
  69. An aeration energy model for an immersed membrane bioreactor
  70. Character of Extracellular Polymeric Substances and Soluble Microbial Products and Their Effect on Membrane Hydraulics During Airlift Membrane Bioreactor Applications
  71. Optimisation of dead-end filtration conditions for an immersed anoxic membrane bioreactor
  72. Immersed membrane bioreactors for nitrate removal from drinking water: Cost and feasibility
  73. Biological treatment of ion-exchange brine regenerant for re-use: A review
  74. The status of membrane bioreactor technology
  75. Sludge characteristics and membrane fouling in full-scale submerged membrane bioreactors
  76. Denitrification from drinking water using a membrane bioreactor: Chemical and biochemical feasibility
  77. Influence of substrate on fouling in anoxic immersed membrane bioreactors
  78. The cost of a package plant membrane bioreactor
  79. Biomass effects on oxygen transfer in membrane bioreactors
  80. Flux criticality and sustainability in a hollow fibre submerged membrane bioreactor for municipal wastewater treatment
  81. Effect of high salinity on activated sludge characteristics and membrane permeability in an immersed membrane bioreactor
  82. A review of membrane bioreactor potential for nitrate removal from drinking water
  83. The Impact of Intermittent Aeration on the Operation of Air‐Lift Tubular Membrane Bioreactors under Sub‐Critical Conditions
  84. Sustainable Flux Fouling in a Membrane Bioreactor: Impact of Flux and MLSS
  85. Bacterial diversity is determined by volume in membrane bioreactors
  86. A statistical approach to the optimisation of membrane operation
  87. A synopsis of membrane technologies in UK municipal potable water treatment: history, status and prospects
  88. Critical analysis of submerged membrane sequencing batch reactor operating conditions
  89. Sub-critical flux fouling in membrane bioreactors — a review of recent literature
  90. Errata to “Pre-coagulation for microfiltration of an upland surface water”
  91. A comparison of submerged and sidestream tubular membrane bioreactor configurations
  92. Membrane bioreactors vs conventional biological treatment of landfill leachate: a brief review
  93. High-rate clarification of municipal wastewaters: a brief appraisal
  94. Characterisation of dead-end ultrafiltration of biotreated domestic wastewater
  95. Pre-coagulation for microfiltration of an upland surface water
  96. Critical flux determination by the flux-step method in a submerged membrane bioreactor
  97. Industrial Wastewater Recovery & Re-use with Membranes
  98. Impact of aeration, solids concentration and membrane characteristics on the hydraulic performance of a membrane bioreactor
  99. The fate of chlorine and organic materials in swimming pools
  100. The textile industry
  101. Introduction
  102. Membrane technology
  103. Membrane Fouling in Membrane Bioreactors for Wastewater Treatment
  104. Submerged membrane bioreactors: flat plate or hollow fibre?
  105. Domestic carbonation process optimisation
  106. Air sparging of a submerged MBR for municipal wastewater treatment
  107. The control of bubble size in carbonated beverages
  108. A statistical method for quantifying the different fouling effects of three combined water sources on an ultrafiltration membrane
  109. Comment on “ultrafiltration behaviour of extracellular and metabolic products in activated sludge system with UF separation process”
  110. Nutrient addition to enhance biological treatment of greywater
  111. Optimisation of combined coagulation and microfiltration for water treatment
  112. Magnetically-Enhanced Disinfection of Swimming Pool Waters
  113. Disinfection by-product formation in swimming pool waters: a simple mass balance
  114. Aerobic MBRs for domestic wastewater treatment: a review with cost considerations
  115. Bacterial rejection in crossflow microfiltration of sewage
  116. Flocculation modelling: a review
  117. Reduction of faecal coliform bacteria in sewage effluents using a microporous polymeric membrane
  118. Characterisation of zirconium/poly(acrylic acid) low pressure dynamically formed membranes by use of the extended Nernst-Planck equation
  119. Magnetic treatment of calcium carbonate scale—effect of pH control
  120. Effect of salt concentration on the structure of low-pressure dynamically-formed membranes
  121. Examination of the permeability dependence on ionic strength of low-pressure dynamically-formed membranes
  122. Magnetic amelioration of scale formation
  123. Influence of configuration and substrate on the properties of dynamically formed membranes
  124. Polarization and back em.f. in electrodialysis