All Stories

  1. Effects of Blade Tip Geometry on Cutting Characteristics of Lead Alloy Sheet Subjected to Wedge Indentation

    Article • Key Engineering Materials, November 2016, Trans Tech Publications

    Shigeru Nagasawa

  2. Effect of bending velocity on time-dependent release behavior of creased white-coated paperboard

    Article • Mechanical Engineering Journal, January 2016, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  3. Cutting and Bending of Plastics Sheet

    Article • Journal of the Japan Society for Technology of Plasticity, January 2016, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  4. ニップローラがロールの応力分布や摩擦力に及ぼす影響（ニップローラへの巻き付き角を考慮した2次元巻き取りシミュレーション）

    Article • Transactions of the JSME (in Japanese), January 2016, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  5. Effects of shearing parameters on cutting characteristics of polycarbonate sheet subjected to straight punch/die shearing

    Article • Journal of Materials Processing Technology, June 2015, Elsevier

    Shigeru Nagasawa

  6. Effects of folding numbers, scoring depth and bending velocity on bending-moment relaxation of creased paperboard

    Article • Mechanical Engineering Journal, January 2015, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  7. Effects of Scoring Depth, Tracking Angle, Rubbering on Bending-Moment Relaxation of Creased Paperboard

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Shigeru Nagasawa

  8. Cutting characteristics of white-coated paperboard subjected to straight punch/die shearing under overlapped clearance

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2014, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  9. Lateral shift of web and edge shape of roll in winding process simulated by FEM (Development of web lateral shift, roll curved edge, and telescoping)

    Article • Transactions of the JSME (in Japanese), January 2014, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  10. Finite Element Analysis of Corrugated Board on Rotary Creasing Process

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2013, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  11. Bending Effect on Cutting Characteristics of Polycarbonate Thick Sheet Subjected to Indentation of Heightwise-Asymmetric Wedge Blades

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Shigeru Nagasawa

  12. Effect of Scoring Condition on Creasing Characteristics of Double-Wall Corrugated Board

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2012, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  13. Effect of Underlay Stiffness on Cutting Profile of Polycarbonate Sheet during Wedge Indentation Process

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2012, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  14. Bending Effect on Cutting Characteristics of Polycarbonate Thick Sheet Subjected to Indentation of Heightwise-Asymmetric Wedge Blades

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Shigeru Nagasawa

  15. 樹脂板の押抜き加工の研究

    Article • Journal of the Japan Society for Technology of Plasticity, January 2012, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  16. Effect of Underlay Rigidity on Breaking Behavior of Aluminum Sheet during Wedged Shearing Process

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Shigeru Nagasawa

  17. ANALYSIS OF CUTTING CHARACTERISTIC OF POLYCARBONATE SHEET SUBJECTED TO WEDGE INDENTATION BY KNIFE EDGE AND GROOVED PLATE

    Article • Machining Science and Technology, April 2011, Taylor & Francis

    Shigeru Nagasawa

  18. Finite Element Analysis of Cutting Deformation of Stacked Polycarbonate Sheets Subjected to Two-Line Wedge Indentation

    Article • Journal of Solid Mechanics and Materials Engineering, January 2011, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  19. Bending Moment Characteristics on Repeated Folding Motion of Coated Paperboard Scored by Round-Edge Knife

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2011, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  20. Generation Behavior of Threadlike Paper Dustin Shearing of Heightwise Corrugated Medium

    Article • Journal of the Japan Society for Technology of Plasticity, January 2011, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  21. Cutting Characteristic of Polycarbonate Sheet Subjected to Wedge Indentation by Knife Edge and Grooved Plate

    Article • Key Engineering Materials, June 2010, Trans Tech Publications

    Shigeru Nagasawa

  22. Effects of the Edm Combined Ultrasonic Vibration on the Machining Properties of Si3N4

    Article • MATERIALS TRANSACTIONS, January 2010, Japan Institute of Metals

    Shigeru Nagasawa

  23. Contact Stability on Cutting Characteristics of Polycarbonate Sheets Subjected to Two-Line Wedge Indentation

    Article • Journal of Solid Mechanics and Materials Engineering, January 2010, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  24. Effect of Blade Tip Height on Cutting Characteristics of Polycarbonate SheetSubjected to Two-Line Wedge Indentation

    Article • Journal of the Japan Society for Technology of Plasticity, January 2010, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  25. Effects of Combined Ultrasonic Vibration during the Sinking EDM Process for Cemented Carbide

    Article • Advanced Materials Research, June 2009, Trans Tech Publications

    Shigeru Nagasawa

  26. Effect of Rubber Fixture on Cutting Characteristic ofWhite-Coated Paperboard

    Article • Journal of the Japan Society for Technology of Plasticity, January 2009, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  27. Cutting Characteristics of Piled-up Cardboards Subjected toWedge Indentation

    Article • Journal of the Japan Society for Technology of Plasticity, January 2009, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  28. Effect of Blade Tip Profile on Peel Cohesion Strength of White-CoatedPaperboard Wedged by Center Bevel Blade

    Article • Journal of the Japan Society for Technology of Plasticity, January 2009, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  29. Deformation Characteristics on Surface Layer of White-Coated Paperboard by Center Bevel Blade Subjected to Pushing Load

    Article • Materials Science Forum, January 2008, Trans Tech Publications

    Shigeru Nagasawa

  30. Mechanical Characteristics of Center Bevelled Double Structure Blade

    Article • MATERIALS TRANSACTIONS, January 2008, Japan Institute of Metals

    Shigeru Nagasawa

  31. Effect of Underlay Rigidity on Cutting Characteristic of Aluminum Foil during Wedge Shearing Process

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2008, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  32. Pressure Balance Characteristic of a Double Structure Blade under Quasi-Statically Reciprocal Loading Condition

    Article • Journal of Solid Mechanics and Materials Engineering, January 2008, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  33. Tensile Characteristics of Connecting Portions of PaperboardSubjected to Indentation of Nicked Center Bevel Blade

    Article • Journal of the Japan Society for Technology of Plasticity, January 2008, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  34. Effect of surface hardness of counter plate on crushing of blade tip during pushing shear of paperboard

    Article • Journal of Materials Processing Technology, October 2007, Elsevier

    Shigeru Nagasawa

  35. Bonding Strength of W-Cu Joint by PECS Method

    Article • September 2007, CrossRef Test Account

    Shigeru Nagasawa

  36. Bonding Strength of W-Cu Joint by PECS Method

    Article • Solid State Phenomena, January 2007, Trans Tech Publications

    Shigeru Nagasawa

  37. Effect of Hardness Combination on Contact Deformation of Center Bevel Blade with Counter Plate Subjected to a Pushing Load

    Article • Journal of Solid Mechanics and Materials Engineering, January 2007, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  38. Cutting Characteristics on Surface Layer of Paperboard byCenter Bevel Blade

    Article • Journal of the Japan Society for Technology of Plasticity, January 2007, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  39. Effect of Cutting Line End of Paperboard on Pushing-LoadCharacteristic of Center Bevel Blade

    Article • Journal of the Japan Society for Technology of Plasticity, January 2007, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  40. Effect of tip profile on cutting processability of a trapezoidal cutting blade indented to an aluminum sheet

    Article • Journal of Mechanics of Materials and Structures, December 2006, Mathematical Sciences Publishers

    Shigeru Nagasawa

  41. Stress analysis of wedged rupture in surface layer of coated paperboard

    Article • Journal of Materials Processing Technology, September 2006, Elsevier

    Shigeru Nagasawa

  42. Dynamic Characteristics of Blade Cutting Force during Pushing Shear on Paperboard

    Article • Journal of the Japan Society for Technology of Plasticity, January 2006, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  43. 押抜き荷重を受ける切刃の焼入層の変形解析

    Article • Journal of the Japan Society for Technology of Plasticity, January 2006, The Japan Society for Technology and Plasticity

    Shigeru Nagasawa

  44. Joining of Tungsten-Copper Using Pulse Electric Current Sintering Method

    Article • December 2005, CrossRef Test Account

    Shigeru Nagasawa

  45. Joining of Tungsten-Copper Using Pulse Electric Current Sintering Method

    Article • Materials Science Forum, January 2005, Trans Tech Publications

    Shigeru Nagasawa

  46. Orthotropic effect and strain dependency of paperboard on load characteristic of center bevel cutter indented on paperboard

    Article • Journal of Materials Processing Technology, January 2005, Elsevier

    Shigeru Nagasawa

  47. Cutting Mechanism and Load Characteristic of Trapezoidal Center Bevel Cutter Indented on Aluminum Sheet

    Article • JSME International Journal Series C, January 2004, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  48. Load Caracteristic and Deformation Mechanism of Trapezoidal Center Bevel Cutter Indentation to Aluminum Sheet

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, January 2004, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  49. Load Characteristic of Center Bevel Cutter Indented on Paperboard with Orthotropic Properties and Strain Dependency

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, January 2004, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  50. 音圧レベルを用いた板紙型抜き加工センシング

    Article • Journal of the Japan Society for Precision Engineering, January 2002, Japan Society for Precision Engineering

    Shigeru Nagasawa

  51. Support system for finite element analysis

    Article • Advances in Engineering Software, December 1996, Elsevier

    Shigeru Nagasawa

  52. 軸対称異種材料接合体の残留応力に及ぼす温度場の影響 定傾斜温度分布状態の弾性解析

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1995, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  53. 段ボールシートの三次元曲げ応力解析

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1994, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  54. Introduction to FEM simulation for deforming analysis.

    Article • Journal of Japan Institute of Light Metals, January 1994, Japan Institute of Light Metals

    Shigeru Nagasawa

  55. 特集： 界面力学 応力特異性指数に基づく異材接合体強度の簡易評価

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1994, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  56. 丸棒異種材料接合体の残留応力解析に関する検討 熱弾性問題における軸対称状態と平面ひずみ状態との比較

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1993, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  57. Investigation into Reduction of Residual Stress near the Edge of an Interface between Bonded Dissimilar Materials. Bonding Method That Reduces of Residual Stress.

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1993, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  58. Three-Dimensional Stress Analysis for Bonded Dissimilar Materials.

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1992, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  59. Investigation into Subdivided FEM Model of DIssimilar materials Effect of Stress Singularity on Subdivided FEM Model.

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1992, Japan Society of Mechanical Engineers

    Shigeru Nagasawa

  60. A New Design Method for Flexural Orifices

    Article • Transactions of the Society of Instrument and Control Engineers, January 1983, The Society of Instrument and Control Engineers

    Shigeru Nagasawa

  61. Development and Estimation of Case Retrieval Model for Machining Knowledge Support System on Machine Design

    Article • Springer Science + Business Media

    Shigeru Nagasawa