All Stories

  1. Color carbon fiber and its discoloration response
  2. Anti-corrosion and electrically conductive inorganic conversion coatings based on aligned graphene derivatives by electrodeposition
  3. Microcapsule/silica dual-fillers for self-healing, self-reporting and corrosion protection properties of waterborne epoxy coatings
  4. Discoloration response of graphene oxide pseudo-photonic crystal film on flexible substrate
  5. Marangoni interface self-assembly hybrid carbon nano-network for transparent conductive silicone rubber
  6. Effect of hierarchical structure on electrical properties and percolation behavior of multiscale composites modified by carbon nanotube coating
  7. Achieving Higher Strength and Sensitivity toward UV Light in Multifunctional Composites by Controlling the Thickness of Nanolayer on the Surface of Glass Fiber
  8. Strong Anisotropy and Ultralow Percolation Threshold in Multiscale Composites Modified by Carbon Nanotubes Coated Hollow Glass Fiber
  9. Self-assembled graphene oxide microcapsules in Pickering emulsions for self-healing waterborne polyurethane coatings
  10. An Ionic Liquid as Interface Linker for Tuning Piezoresistive Sensitivity and Toughness in Poly(vinylidene fluoride)/Carbon Nanotube Composites
  11. Variable structural colouration of composite interphases
  12. In-situ synchrotron X-ray studies of crystallization of β-nucleated iPP subjected to a wide range of shear rates and shear temperatures
  13. Water Vapor Sensing by Carbon Nanoparticle “Skin”
  14. A Single Glass Fiber with Ultrathin Layer of Carbon Nanotube Networks Beneficial toIn-SituMonitoring of Polymer Properties in Composite Interphases
  15. Carbon fiber surfaces and composite interphases
  16. Cellulose fibres with carbon nanotube networks for water sensing
  17. Characterization of structural, mechanical and nano-mechanical properties of electrospun PGS/PCL fibers
  18. Multifunctional films composed of carbon nanotubes and cellulose regenerated from alkaline–urea solution
  19. Development of functional glass fibres with nanocomposite coating: A comparative study
  20. The use of a carbon nanotube layer on a polyurethane multifilament substrate for monitoring strains as large as 400%
  21. Multi-functional multi-walled carbon nanotube-jute fibres and composites
  22. Single MWNT-Glass Fiber as Strain Sensor and Switch
  23. Behaviour of Strain-Hardening Cement-Based Composites Under High Strain Rates
  24. Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites
  25. Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors
  26. Tensile strength of glass fibres with carbon nanotube–epoxy nanocomposite coating: Effects of CNT morphology and dispersion state
  27. Photochemical surface modification of PP for abrasion resistance
  28. Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete II: Water adsorption and composite interphases
  29. Stitched glass/PP composite. Part I: Tensile and impact properties
  30. Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete I: Fibre properties and durability
  31. Nanocomposite coatings for healing surface defects of glass fibers and improving interfacial adhesion
  32. Investigation on adhesion, interphases, and failure behaviour of cyclic butylene terephthalate (CBT®)/glass fiber composites
  33. Controlled interfacial adhesion of Twaron® aramid fibres in composites by the finish formulation
  34. Adhesion of PBO fiber in epoxy composites
  35. Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties
  36. Static and dynamic properties of single and multi-fiber/epoxy composites modified by sizings
  37. Adhesion Issues in PBO/Epoxy Composites
  38. Surface Defects Repairing by Polymer Coating with Low Fraction of Nano-Reinforcements
  39. Nanostructured coatings of glass fibers: Improvement of alkali resistance and mechanical properties
  40. Jute/polypropylene composites I. Effect of matrix modification
  41. Photochemical surface modification of PET by excimer UV lamp irradiation
  42. Adhesion of epoxy/glass fibre composites influenced by aging effects on sizings
  43. Coatings for glass fibers in a cementitious matrix
  44. Enhancing the Properties of Composites by Controlling Their Interphase Parameters
  45. Carbon fibers and composites with epoxy resins: Topography, fractography and interphases
  46. Environmental resistance and mechanical performance of alkali-resistant glass fibers with surface sizings
  47. Sizings on Alkali-Resistant Glass Fibers:  Environmental Effects on Mechanical Properties§
  48. Bond strength measurement between glass fibres and epoxy resin at elevated temperatures using the pull-out and push-out techniques
  49. Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites
  50. Correlation among crystalline morphology of PEEK, interface bond strength, and in‐plane mechanical properties of carbon/PEEK composites
  51. Cooling rate influences in carbon fibre/PEEK composites. Part III: impact damage performance
  52. Cooling rate influences in carbon fibre/PEEK composites. Part II: interlaminar fracture toughness
  53. Prospect of nanoscale interphase evaluation to predict composite properties
  54. Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion
  55. Scanning acoustic microscopy as a tool for quantitative characterisation of damage in CFRPs
  56. EFFECT OF COOLING RATE ON INTERPHASE PROPERTIES OF CARBON FIBRE/PEEK COMPOSITES
  57. Surface modification of ultrahigh molecular weight polyethylene fibers by plasma treatment. II. Mechanism of surface modification
  58. Surface modification of ultrahigh molecular weight polyethylene fibers by plasma treatment. I. Improving surface adhesion
  59. Effect of low-temperature-plasma surface treatment on the adhesion of ultra-high-molecular-weight-polyethylene fibres