All Stories

  1. Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

    Article • Journal of Composites Science, May 2024, MDPI AG

    Dr Seyed R. Koloor, Dr Ali Farokhi Nejad

  2. Cumulative fretting fatigue damage model for steel wire ropes

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2024, Wiley

    Dr Seyed R. Koloor

  3. Digital image correlation technique for failure and crack propagation of fibre-reinforced polymer composites – A review

    Article • Composites and Advanced Materials, February 2024, SAGE Publications

    Dr Seyed R. Koloor

  4. An insight on optimization of FSP process parameters for the preparation of AA5083/(SiC-Gr) hybrid surface composites using the response surface methodology

    Article • Composites and Advanced Materials, September 2023, SAGE Publications

    Dr. Shalok Bharti, Dr Seyed R. Koloor

  5. Hydroxyapatite coating for control degradation and parametric optimization of pure magnesium: an electrophoretic deposition technique for biodegradable implants

    Article • Journal of Materials Research and Technology, September 2023, Elsevier

    Dr Seyed R. Koloor

  6. Optimal Roving Winding on Toroidal Parts of Composite Frames

    Article • Polymers, July 2023, MDPI AG

    Dr Seyed R. Koloor

  7. Utilization of metakaolin on the properties of self-consolidating concrete: A review

    Article • Construction and Building Materials, July 2023, Elsevier

    Dr Seyed R. Koloor

  8. On the asymmetric dynamic response of viscoelastic sector plate made of FG polymer foam

    Article • Thin-Walled Structures, June 2023, Elsevier

    Dr Seyed R. Koloor

  9. Non-local and local criteria based on the extended finite element method (XFEM) for fracture simulation of anisotropic 3D-printed polymeric components

    Article • Rapid Prototyping Journal, May 2023, Emerald

    Dr Seyed R. Koloor

  10. Role of YSZ Particles on Microstructural, Wear, and Corrosion Behavior of Al-15%Mg2Si Hybrid Composite for Marine Applications

    Article • Journal of Marine Science and Engineering, May 2023, MDPI AG

    Dr Seyed R. Koloor

  11. Carbon nanotube characteristics and enhancement effects on the mechanical features of polymer-based materials and structures – A review

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Dr Seyed R. Koloor

  12. Analytical investigation of asymmetric forced vibration behavior of functionally graded porous plates with structural damping

    Article • Mechanics Based Design of Structures and Machines, March 2023, Taylor & Francis

    Dr Seyed R. Koloor

  13. Thermal evaluation of a room coated by thin urethane nanocomposite layer coating for energy-saving efficiency in building applications

    Article • Case Studies in Thermal Engineering, March 2023, Elsevier

    Dr Seyed R. Koloor

  14. A Fatigue Model to Predict Interlaminar Damage of FRP Composite Laminates Subjected to Mode I Load

    Article • Polymers, January 2023, MDPI AG

    Dr Seyed R. Koloor

  15. An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption

    Article • Journal of Materials Research and Technology, January 2023, Elsevier

    Dr Seyed R. Koloor

  16. Lightweight Glass Fiber-Reinforced Polymer Composite for Automotive Bumper Applications: A Review

    Article • Polymers, December 2022, MDPI AG

    Dr Seyed R. Koloor

  17. Strain Rate Effect on Mode I Debonding Characterization of Adhesively Bonded Aluminum Joints

    Article • Processes, December 2022, MDPI AG

    Dr Seyed R. Koloor

  18. Mechanical and Morphological Characterizations of Laminated Object Manufactured 3D Printed Biodegradable Poly(lactic)acid with Various Physical Configurations

    Article • Journal of Marine Science and Engineering, December 2022, MDPI AG

    Dr Seyed R. Koloor

  19. On Comparison of Heat Treated and Non-Heat-Treated LOM Manufactured Sample for Poly(lactic)acid: Mechanical and Morphological View Point

    Article • Polymers, November 2022, MDPI AG

    Dr Seyed R. Koloor

  20. Fractal Analysis for Fatigue Crack Growth Rate Response of Engineering Structures with Complex Geometry

    Article • Fractal and Fractional, November 2022, MDPI AG

    Dr Seyed R. Koloor

  21. On the dynamic response of viscoelastic functionally graded porous plates under various hybrid loadings

    Article • Ocean Engineering, November 2022, Elsevier

    Dr Seyed R. Koloor

  22. Study on fundamental damped frequency parameters of plates made of FG porous material: a close-form solution

    Article • Waves in Random and Complex Media, October 2022, Taylor & Francis

    Dr Seyed R. Koloor

  23. Optimization of Process Parameters in Friction Stir Welding of Aluminum 5451 in Marine Applications

    Article • Journal of Marine Science and Engineering, October 2022, MDPI AG

    Dr Seyed R. Koloor

  24. Preliminary Structural Design of Coreless Spoiler by Topological Optimization

    Article • Processes, October 2022, MDPI AG

    Dr Seyed R. Koloor

  25. Crashworthiness Assessment of Carbon/Glass Epoxy Hybrid Composite Tubes Subjected to Axial Loads

    Article • Polymers, September 2022, MDPI AG

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  26. On Laminated Object Manufactured FDM-Printed ABS/TPU Multimaterial Specimens: An Insight into Mechanical and Morphological Characteristics

    Article • Polymers, September 2022, MDPI AG

    Dr Seyed R. Koloor

  27. Experimental Investigation of the Axial Crushing Response of Flax/Glass Eco-Hybrid Self-Supporting Web Composites

    Article • Fibers, August 2022, MDPI AG

    Dr Seyed R. Koloor

  28. Quality evaluation of aluminum-AA6061 truncated cone deformed by single point incremental forming

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, August 2022, Springer Science + Business Media

    Dr Seyed R. Koloor

  29. On the Performance of a Modified Triple Stack Blade Savonius Wind Turbine as a Function of Geometrical Parameters

    Article • Sustainability, August 2022, MDPI AG

    Dr Seyed R. Koloor

  30. Effect of Blade Diameter on the Performance of Horizontal-Axis Ocean Current Turbine

    Article • Energies, July 2022, MDPI AG

    Dr Seyed R. Koloor

  31. Design of a novel creep testing machine to investigate the creep life history of austenitic steel foil at elevated temperature

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2022, Wiley

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  32. Exploiting fractal features to determine fatigue crack growth rates of metallic materials

    Article • Engineering Fracture Mechanics, July 2022, Elsevier

    Dr Seyed R. Koloor

  33. Supersonic flutter behavior of a polymeric truncated conical shell reinforced with agglomerated CNTs

    Article • Waves in Random and Complex Media, June 2022, Taylor & Francis

    Dr Seyed R. Koloor

  34. Winding optimization of composite frame by dry fiber rovings

    Article • Journal of Industrial Textiles, June 2022, SAGE Publications

    Dr Seyed R. Koloor

  35. A numerical study of the effect of bolt thread geometry on the load distribution of continuous threads

    Article • Journal of Engineering Research, June 2022, Elsevier

    Dr Seyed R. Koloor

  36. Damage characterization of dental nanocomposite adhesive in orthodontic treatment applications

    Article • International Journal of Damage Mechanics, April 2022, SAGE Publications

    Dr Seyed R. Koloor

  37. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites

    Article • Polymer Testing, April 2022, Elsevier

    Dr Seyed R. Koloor

  38. Finite Element Analysis of the Ballistic Impact on Auxetic Sandwich Composite Human Body Armor

    Article • Materials, March 2022, MDPI AG

    Dr Seyed R. Koloor

  39. Investigation of effective geometrical parameters on wear of hot forging die

    Article • Journal of Materials Research and Technology, November 2021, Elsevier

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  40. Mechanical Behaviour of Pin-Reinforced Foam Core Sandwich Panels Subjected to Low Impact Loading

    Article • Polymers, October 2021, MDPI AG

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  41. Heat insulation effect in solar radiation of polyurethane powder coating nanocomposite

    Article • Scientific Reports, October 2021, Springer Science + Business Media

    Dr Seyed R. Koloor

  42. Hybrid and Synthetic FRP Composites under Different Strain Rates: A Review

    Article • Polymers, October 2021, MDPI AG

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  43. Temperature Impact on Engineered Cementitious Composite Containing Basalt Fibers

    Article • Applied Sciences, July 2021, MDPI AG

    Dr Seyed R. Koloor

  44. Displacement Rate Effects on the Mode II Shear Delamination Behavior of Carbon Fiber/Epoxy Composites

    Article • Polymers, June 2021, MDPI AG

    Dr Seyed R. Koloor

  45. Strength and flexural behavior of steel fiber and silica fume incorporated self-compacting concrete

    Article • Journal of Materials Research and Technology, May 2021, Elsevier

    Dr Seyed R. Koloor

  46. Role B4C Addition on Microstructure, Mechanical, and Wear Characteristics of Al-20%Mg2Si Hybrid Metal Matrix Composite

    Article • Applied Sciences, March 2021, MDPI AG

    Dr Seyed R. Koloor

  47. Effect of Alumina Additives on Mechanical and Fresh Properties of Self-Compacting Concrete: A Review

    Article • Processes, March 2021, MDPI AG

    Dr Seyed R. Koloor

  48. Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature

    Article • Processes, March 2021, MDPI AG

    Dr Seyed R. Koloor

  49. Influence of barium addition on the formation of primary Mg2Si crystals from Al–Mg–Si melts

    Article • Journal of Materials Research and Technology, March 2021, Elsevier

    Dr Seyed R. Koloor

  50. Fabrication of High-Quality Straight-Line Polymer Composite Frame with Different Radius Parts Using Fiber Winding Process

    Article • Polymers, February 2021, MDPI AG

    Dr Seyed R. Koloor

  51. Thermal Delamination Modelling and Evaluation of Aluminium–Glass Fibre-Reinforced Polymer Hybrid

    Article • Polymers, February 2021, MDPI AG

    Dr Seyed R. Koloor

  52. An Optimum Fatigue Design of Polymer Composite Compressed Natural Gas Tank Using Hybrid Finite Element-Response Surface Methods

    Article • Polymers, February 2021, MDPI AG

    Dr Seyed R. Koloor

  53. An Extended Thickness-Dependent Moisture Absorption Model for Unidirectional Carbon/Epoxy Composites

    Article • Polymers, January 2021, MDPI AG

    Dr Seyed R. Koloor

  54. Linear-Nonlinear Stiffness Responses of Carbon Fiber-Reinforced Polymer Composite Materials and Structures: A Numerical Study

    Article • Polymers, January 2021, MDPI AG

    Dr Seyed R. Koloor

  55. Micro- and Nanocellulose in Polymer Composite Materials: A Review

    Article • Polymers, January 2021, MDPI AG

    Dr. R.A. Ilyas, Dr Seyed R. Koloor

  56. Graphene Nanoparticle-Based, Nitrate Ion Sensor Characteristics

    Article • Nanomaterials, January 2021, MDPI AG

    Dr Seyed R. Koloor

  57. Dynamic response of aluminium sheet 2024-T3 subjected to close-range shock wave: experimental and numerical studies

    Article • Journal of Materials Research and Technology, January 2021, Elsevier

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  58. Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings

    Article • Polymers, December 2020, MDPI AG

    Dr Seyed R. Koloor

  59. Experimental and Numerical Analysis of Fatigue Life of Aluminum Al 2024-T351 at Elevated Temperature

    Article • Metals, November 2020, MDPI AG

    Dr Seyed R. Koloor

  60. Numerical Prediction of Residual Stresses Distribution in Thin-Walled Press-Braked Stainless Steel Sections

    Article • Materials, November 2020, MDPI AG

    Dr Seyed R. Koloor

  61. Optimum Design of Sunken Reinforced Enclosures under Buckling Condition

    Article • Applied Sciences, November 2020, MDPI AG

    Dr Seyed R. Koloor

  62. Performance improvement of a new proposed Savonius hydrokinetic turbine: a numerical investigation

    Article • Energy Reports, November 2020, Elsevier

    Dr Seyed R. Koloor

  63. Improving ‘Lipid Productivity’ in Microalgae by Bilateral Enhancement of Biomass and Lipid Contents: A Review

    Article • Sustainability, October 2020, MDPI AG

    Dr Seyed R. Koloor

  64. Estimation of Critical Dimensions for the Crack and Pitting Corrosion Defects in the Oil Storage Tank Using Finite Element Method and Taguchi Approach

    Article • Metals, October 2020, MDPI AG

    Dr Seyed R. Koloor

  65. The Effect of Lateral Load Type on Shear Lag of Concrete Tubular Structures with Different Plan Geometries

    Article • Crystals, October 2020, MDPI AG

    Dr Seyed R. Koloor

  66. Moisture Absorption Effects on Mode II Delamination of Carbon/Epoxy Composites

    Article • Polymers, September 2020, MDPI AG

    Dr Seyed R. Koloor

  67. Investigation on the Curvature Correction Factor of Extension Spring

    Article • Materials, September 2020, MDPI AG

    Dr Seyed R. Koloor

  68. Failure of Glass Fibre-Reinforced Polypropylene Metal Laminate Subjected to Close-Range Explosion

    Article • Polymers, September 2020, MDPI AG

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  69. Thermal Performance of Alginate Concrete Reinforced with Basalt Fiber

    Article • Crystals, September 2020, MDPI AG

    Dr Seyed R. Koloor

  70. Carbon Nanoparticle-Based Electro-Thermal Building Block

    Article • Applied Sciences, July 2020, MDPI AG

    Dr Seyed R. Koloor

  71. On the Performance of Small-Scale Horizontal Axis Tidal Current Turbines. Part 1: One Single Turbine

    Article • Sustainability, July 2020, MDPI AG

    Dr Seyed R. Koloor

  72. Isolation and Characterization of a Novel Bacterium from the Marine Environment for Trichloroacetic Acid Bioremediation

    Article • Applied Sciences, July 2020, MDPI AG

    Dr Seyed R. Koloor

  73. Vehicle-Assisted Techniques for Health Monitoring of Bridges

    Article • Sensors, June 2020, MDPI AG

    Dr Seyed R. Koloor

  74. Using Finite Element Approach for Crashworthiness Assessment of a Polymeric Auxetic Structure Subjected to the Axial Loading

    Article • Polymers, June 2020, MDPI AG

    Dr Ali Farokhi Nejad, Dr Seyed R. Koloor

  75. A Review on Vehicle Classification and Potential Use of Smart Vehicle-Assisted Techniques

    Article • Sensors, June 2020, MDPI AG

    Dr Seyed R. Koloor

  76. Application of the Subspace-Based Methods in Health Monitoring of Civil Structures: A Systematic Review and Meta-Analysis

    Article • Applied Sciences, May 2020, MDPI AG

    Dr Seyed R. Koloor

  77. Mechanical Characterization of Heterogeneous Polycrystalline Rocks Using Nanoindentation Method in Combination with Generalized Means Method

    Article • Journal of Mechanics, May 2020, Oxford University Press (OUP)

    Dr Seyed R. Koloor

  78. Fabrication of High-Quality Polymer Composite Frame by a New Method of Fiber Winding Process

    Article • Polymers, May 2020, MDPI AG

    Dr Seyed R. Koloor

  79. A Comparative Study of the Data-Driven Stochastic Subspace Methods for Health Monitoring of Structures: A Bridge Case Study

    Article • Applied Sciences, April 2020, MDPI AG

    Dr Seyed R. Koloor

  80. Coulomb Blockade Effect in Well-Arranged 2D Arrays of Palladium Nano-Islands for Hydrogen Detection at Room Temperature: A Modeling Study

    Article • Nanomaterials, April 2020, MDPI AG

    Dr Seyed R. Koloor

  81. Health Monitoring of Civil Infrastructures by Subspace System Identification Method: An Overview

    Article • Applied Sciences, April 2020, MDPI AG

    Dr Seyed R. Koloor

  82. Analytical Approach to Study Sensing Properties of Graphene Based Gas Sensor

    Article • Sensors, March 2020, MDPI AG

    Dr Seyed R. Koloor

  83. Carbon-Based Band Gap Engineering in the h-BN Analytical Modeling

    Article • Materials, February 2020, MDPI AG

    Dr Seyed R. Koloor

  84. An Analytical Conductance Model for Gas Detection Based on a Zigzag Carbon Nanotube Sensor

    Article • Sensors, January 2020, MDPI AG

    Dr Seyed R. Koloor

  85. An Energy-Based Concept for Yielding of Multidirectional FRP Composite Structures Using a Mesoscale Lamina Damage Model

    Article • Polymers, January 2020, MDPI AG

    Dr Seyed R. Koloor

  86. Effects of cell aspect ratio and relative density on deformation response and failure of honeycomb core structure

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Dr Seyed R. Koloor

  87. Analytical Prediction of Highly Sensitive CNT-FET-Based Sensor Performance for Detection of Gas Molecules

    Article • IEEE Access, January 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Seyed R. Koloor

  88. Assessment of Nano-Indentation Method in Mechanical Characterization of Heterogeneous Nanocomposite Materials Using Experimental and Computational Approaches

    Article • Scientific Reports, October 2019, Springer Science + Business Media

    Dr Seyed R. Koloor

  89. Fatigue damage of cohesive interfaces in fiber-reinforced polymer composite laminates

    Article • Composites Science and Technology, October 2019, Elsevier

    Dr Seyed R. Koloor

  90. Assessment of Compressive Mechanical Behavior of Bis-GMA Polymer Using Hyperelastic Models

    Article • Polymers, September 2019, MDPI AG

    Dr Seyed R. Koloor

  91. Nano-Level Damage Characterization of Graphene/Polymer Cohesive Interface under Tensile Separation

    Article • Polymers, September 2019, MDPI AG

    Dr Seyed R. Koloor

  92. A Hybrid Experimental-Computational Approach to Determine Constitutive Models for Hyperelastic Polymers

    Article • February 2019, MDPI AG

    Dr Seyed R. Koloor

  93. Mode-II interlaminar fracture and crack-jump phenomenon in CFRP composite laminate materials

    Article • Composite Structures, November 2018, Elsevier

    Dr Seyed R. Koloor

  94. Effects of Sample and Indenter Configurations of Nanoindentation Experiment on the Mechanical Behavior and Properties of Ductile Materials

    Article • Metals, June 2018, MDPI AG

    Dr Seyed R. Koloor

  95. FE model-based construction and progressive damage processes of FRP composite laminates with different manufacturing processes

    Article • International Journal of Mechanical Sciences, June 2018, Elsevier

    Dr Seyed R. Koloor

  96. Elastic-damage deformation response of fiber-reinforced polymer composite laminates with lamina interfaces

    Article • Journal of Reinforced Plastics and Composites, February 2017, SAGE Publications

    Dr Seyed R. Koloor, Mohd TAMIN

  97. Brittle failure mechanism of cortical bone materials under compressive load

    Article • Journal of the Mechanical Behavior of Biomedical Materials, February 2017, Elsevier

    Dr Seyed R. Koloor

  98. Biomechanical Evaluation Methods

    Article • January 2017, Elsevier

    Amirhossein Goharian, Dr Seyed R. Koloor

  99. Mechanical Behavior of Cortical Bone

    Article • January 2017, Elsevier

    Dr Seyed R. Koloor

  100. Interlaminar Damage Behavior of CFRP Composite Laminates under Cyclic Shear Loading Conditions

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Mr Muhammad A'imullah bin Abdullah, Dr Seyed R. Koloor

  101. Modeling Interlaminar Shear Crack-Jump Phenomenon in Fiber-Reinforced Polymer Composites

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Dr Seyed R. Koloor, Majid R. Ayatollahi

  102. Linear Elastic Analysis of Bovine Cortical Bone under Compression Loading

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Dr Seyed R. Koloor

  103. Finite Element Analysis of Temporomandibular Joint Implant Under Five Simulated Clenching Loads

    Article • Advanced Science Letters, November 2013, American Scientific Publishers

    Dr Seyed R. Koloor

  104. Explicit Dynamic Simulation of High Density Polyethylene Beam under Flexural Loading Condition

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  105. Effect of Strain Rate Upsetting Process on Mechanical Behaviour of Epoxy Polymer

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  106. Hyperelastic Analysis of High Density Polyethylene under Monotonic Compressive Load

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  107. Effect of Strain-Rate on Flexural Behavior of Composite Sandwich Panel

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  108. Finite Element Analysis of Curvature Precast Polymer Panel for Temporary Support of Tunnels

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  109. Simulation of multiple failure process of Steel-Concrete Composite Slabs

    Article • Applied Mechanics and Materials, April 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  110. Design Analysis of TMJ Implant under Physiological Loading Condition

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Professor Abbas - Azari, Dr Seyed R. Koloor

  111. Mode I Interlaminar Fracture Characterization of CFRP Composite Laminates

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  112. Effect of Ply Thickness on Displacements and Stresses in Laminated GFRP Cylinder Subjected to Radial Load

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  113. Mechanical Behavior of GFRP Laminated Composite Pipe Subjected to Uniform Radial Patch Load

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  114. Nonlinear Mechanical Analysis of Polymer Precast Panel for Temporary Support of Tunnels

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Dr Seyed R. Koloor

  115. Evolution Characteristics of Delamination Damage in CFRP Composites Under Transverse Loading

    Article • January 2012, Springer Science + Business Media

    Dr Seyed R. Koloor

  116. Multi-delamination process of CFRP composite Laminate

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Dr Seyed R. Koloor

  117. Simulation of Brittle Damage for Fracture Process of Endodontically Treated Tooth

    Article • January 2011, Springer Science + Business Media

    Dr Seyed R. Koloor