All Stories

  1. Ex Situ and In Situ Studies of Radiation Damage Mechanisms in Zr-Nb Alloys

    Article • July 2021, ASTM International

    Professor Sergio Lozano-Perez

  2. Site‐specific specimen preparation for SIMS analysis of radioactive samples

    Article • Journal of Microscopy, November 2020, Wiley

    Professor Sergio Lozano-Perez

  3. Helical dislocations: Observation of vacancy defect bias of screw dislocations in neutron irradiated Fe–9Cr

    Article • Acta Materialia, December 2019, Elsevier

    Professor Sergio Lozano-Perez

  4. Hydrogen pickup during oxidation in aqueous environments: The role of nano-pores and nano-pipes in zirconium oxide films

    Article • Acta Materialia, November 2019, Elsevier

    Professor Sergio Lozano-Perez

  5. Mechanism of the α-Zr to hexagonal-ZrO transformation and its impact on the corrosion performance of nuclear Zr alloys

    Article • Acta Materialia, October 2019, Elsevier

    Professor Sergio Lozano-Perez

  6. Effect of neutron and ion irradiation on the metal matrix and oxide corrosion layer on Zr-1.0Nb cladding alloys

    Article • Acta Materialia, July 2019, Elsevier

    Professor Sergio Lozano-Perez

  7. Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water

    Article • Acta Materialia, February 2019, Elsevier

    Professor Sergio Lozano-Perez

  8. Irradiation-induced amorphization in the zirconium suboxide on Zr-0.5Nb alloys

    Article • Journal of Nuclear Materials, January 2019, Elsevier

    Professor Sergio Lozano-Perez

  9. Determining EDS and EELS partial cross-sections from multiple calibration standards to accurately quantify bi-metallic nanoparticles using STEM

    Article • Micron, June 2018, Elsevier

    Lewys Jones, Professor Sergio Lozano-Perez

  10. A mechanistic study of the temperature dependence of the stress corrosion crack growth rate in SUS316 stainless steels exposed to PWR primary water

    Article • Acta Materialia, August 2016, Elsevier

    Professor Sergio Lozano-Perez

  11. Quantitative Energy-Dispersive X-Ray Analysis of Catalyst Nanoparticles Using a Partial Cross Section Approach

    Article • Microscopy and Microanalysis, January 2016, Cambridge University Press

    Dr Katherine E MacArthur, Professor Sergio Lozano-Perez

  12. Structural and mechanical properties of γ-irradiated Zr/Nb multilayer nanocomposites

    Article • Materials Letters, January 2016, Elsevier

    Professor Sergio Lozano-Perez

  13. Quantification of oxide particle composition in model oxide dispersion strengthened steel alloys

    Article • Ultramicroscopy, December 2015, Elsevier

    Professor Sergio Lozano-Perez

  14. Quantification of a Heterogeneous Ruthenium Catalyst on Carbon-black using ADF Imaging

    Article • Journal of Physics Conference Series, October 2015, Institute of Physics Publishing

    Lewys Jones, Professor Sergio Lozano-Perez

  15. Achieving 50 nm lateral-resolution quantitative EDX SEM

    Article • Journal of Physics Conference Series, October 2015, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  16. The effect of Sn concentration on oxide texture and microstructure formation in zirconium alloys

    Article • Acta Materialia, October 2015, Elsevier

    Professor Sergio Lozano-Perez

  17. Atom probe tomography of stress corrosion crack tips in SUS316 stainless steels

    Article • Corrosion Science, September 2015, Elsevier

    Professor Sergio Lozano-Perez

  18. Effect of Ti and Cr on dispersion, structure and composition of oxide nano-particles in model ODS alloys

    Article • Acta Materialia, September 2015, Elsevier

    Professor Sergio Lozano-Perez

  19. Using transmission Kikuchi diffraction to study intergranular stress corrosion cracking in type 316 stainless steels

    Article • Micron, August 2015, Elsevier

    Professor Sergio Lozano-Perez

  20. An atom probe tomography study of the oxide–metal interface of an oxide intrusion ahead of a crack in a polycrystalline Ni-based superalloy

    Article • Scripta Materialia, March 2015, Elsevier

    Professor Sergio Lozano-Perez

  21. Identifying suboxide grains at the metal–oxide interface of a corroded Zr–1.0%Nb alloy using (S)TEM, transmission-EBSD and EELS

    Article • Micron, February 2015, Elsevier

    Professor Sergio Lozano-Perez

  22. Nanometre-scale evidence for interfacial dissolution–reprecipitation control of silicate glass corrosion

    Article • Nature Materials, January 2015, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  23. Effects of single- and simultaneous triple-ion-beam irradiation on an oxide dispersion-strengthened Fe12Cr steel

    Article • Journal of Materials Science, December 2014, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  24. Quantitative analysis of carbon in cementite using pulsed laser atom probe

    Article • Ultramicroscopy, December 2014, Elsevier

    Professor Sergio Lozano-Perez

  25. TEM characterization of simultaneous triple ion implanted ODS Fe12Cr

    Article • Journal of Nuclear Materials, December 2014, Elsevier

    Professor Sergio Lozano-Perez

  26. Transmission electron microscopy of unstained hybrid Au nanoparticles capped with PPAA (plasma-poly-allylamine): Structure and electron irradiation effects

    Article • Micron, December 2014, Elsevier

    Professor Sergio Lozano-Perez

  27. Low-energy EDX – A novel approach to study stress corrosion cracking in SUS304 stainless steel via scanning electron microscopy

    Article • Micron, November 2014, Elsevier

    Professor Sergio Lozano-Perez

  28. Crystal Structure of the ZrO Phase at Zirconium/Zirconium Oxide Interfaces

    Article • Advanced Engineering Materials, June 2014, Wiley

    Professor Sergio Lozano-Perez

  29. Effect of Sn on Corrosion Mechanisms in Advanced Zr-Cladding for Pressurised Water Reactors

    Article • June 2014, ASTM International

    Professor Sergio Lozano-Perez

  30. In-situ Fe + Ion Irradiation of an Oxide Dispersion Strengthened Steel

    Article • Journal of Physics Conference Series, June 2014, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  31. Structural quantification of nanoparticles by HAADF STEM

    Article • Journal of Physics Conference Series, June 2014, Institute of Physics Publishing

    Professor Sergio Lozano-Perez, Lewys Jones

  32. Comparison of atom probe tomography and transmission electron microscopy analysis of oxide dispersion strengthened steels

    Article • Journal of Physics Conference Series, June 2014, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  33. Relationship between mechanical amorphization and boron integration during processing of FeNbB alloys

    Article • Intermetallics, June 2014, Elsevier

    Professor Sergio Lozano-Perez

  34. SCC in PWRs: Learning from a Bottom-Up Approach

    Article • Metallurgical and Materials Transactions E, May 2014, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  35. Microstructural Characterization of Irradiation-Induced MnNi-Rich Solute Cluster in Highly Neutron-Irradiated MnNiMo Alloyed Weld Metals

    Article • May 2014, ASTM International

    Professor Sergio Lozano-Perez

  36. Nano-cluster stability following neutron irradiation in MA957 oxide dispersion strengthened material

    Article • Journal of Nuclear Materials, January 2014, Elsevier

    Professor Sergio Lozano-Perez

  37. Oxide dispersion strengthened Fe–12Cr steel in three dimensions: An electron tomography study

    Article • Journal of Nuclear Materials, January 2014, Elsevier

    Professor Sergio Lozano-Perez

  38. Structural relaxation in Fe(Co)SiAlGaPCB amorphous alloys

    Article • Journal of Alloys and Compounds, January 2014, Elsevier

    Professor Sergio Lozano-Perez

  39. An investigation of the oxidation behaviour of zirconium alloys using isotopic tracers and high resolution SIMS

    Article • Journal of Nuclear Materials, November 2013, Elsevier

    Professor Sergio Lozano-Perez

  40. Multi-Scale Correlative Microscopy Investigation of Both Structure and Chemistry of Deformation Twin Bundles in Fe–Mn–C Steel

    Article • Microscopy and Microanalysis, October 2013, Oxford University Press (OUP)

    Professor Sergio Lozano-Perez

  41. Subnanometer-Scale Electron Microscopy Analysis

    Article • September 2013, Taylor & Francis

    Professor Sergio Lozano-Perez

  42. How oxidized grain boundaries fail

    Article • Acta Materialia, August 2013, Elsevier

    Professor Sergio Lozano-Perez

  43. Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach

    Article • JOM, April 2013, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  44. Examinations of Oxidation and Sulfidation of Grain Boundaries in Alloy 600 Exposed to Simulated Pressurized Water Reactor Primary Water

    Article • Microscopy and Microanalysis, April 2013, Oxford University Press (OUP)

    Professor Sergio Lozano-Perez

  45. Role of starting phase of boron on the mechanical alloying of FeNbB composition

    Article • Journal of Alloys and Compounds, March 2013, Elsevier

    Professor Sergio Lozano-Perez

  46. Characterisation of Co@Fe3O4 core@shell nanoparticles using advanced electron microscopy

    Article • Nanoscale, January 2013, Royal Society of Chemistry

    Professor Sergio Lozano-Perez

  47. Micromechanical testing of oxidized grain boundaries in Nickel alloys from nuclear reactors

    Article • MRS Proceedings, January 2013, Cambridge University Press

    Professor Sergio Lozano-Perez

  48. Atom-probe tomography of surface oxides and oxidized grain boundaries in alloys from nuclear reactors

    Article • MRS Proceedings, January 2013, Cambridge University Press

    Professor Sergio Lozano-Perez

  49. Extension of the classical theory of crystallization to non-isothermal regimes: Application to nanocrystallization processes

    Article • Journal of Alloys and Compounds, December 2012, Elsevier

    Professor Sergio Lozano-Perez

  50. How the crystallography and nanoscale chemistry of the metal/oxide interface develops during the aqueous oxidation of zirconium cladding alloys

    Article • Acta Materialia, December 2012, Elsevier

    Professor Sergio Lozano-Perez

  51. Multiscale, Multiphysics Numerical Modeling of Fusion Welding with Experimental Characterization and Validation

    Article • JOM, November 2012, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  52. Nanoscale characterisation of grain boundary oxidation in cold-worked stainless steels

    Article • Corrosion Science, October 2012, Elsevier

    Professor Sergio Lozano-Perez

  53. Multi-scale characterisation of oxide on zirconium alloys

    Article • Materials at High Temperatures, September 2012, Taylor & Francis

    Professor Sergio Lozano-Perez

  54. Quantitative analysis of core-shell catalyst nanoparticles for industrial applications

    Article • Journal of Physics Conference Series, July 2012, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  55. Understanding surface oxidation in stainless steels through 3D FIB sequential sectioning

    Article • Journal of Physics Conference Series, July 2012, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  56. (S)TEM analysis of the interdiffusion and barrier layer formation in Mn/Cu heterostructures on SiO 2 for interconnect technologies

    Article • Journal of Physics Conference Series, July 2012, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  57. New Insights into the Atomic-Scale Structures and Behavior of Steels

    Article • Microscopy Today, July 2012, Cambridge University Press

    Professor Sergio Lozano-Perez

  58. Characterizing Environmental Degradation in PWRs by 3D FIB Sequential Sectioning

    Article • June 2012, Wiley

    Professor Sergio Lozano-Perez

  59. 3D Atom-Probe Characterization of Stress and Cold-Work in Stress Corrosion Cracking of 304 Stainless Steel

    Article • June 2012, Wiley

    Professor Sergio Lozano-Perez

  60. Orientation relationships and interface structure of α′-Cr nanoclusters embedded in α-Fe matrix after α–α′ demixing in neutron irradiated Oxide Dispersion Strengthened material

    Article • Materials Letters, May 2012, Elsevier

    Professor Sergio Lozano-Perez

  61. The role of cold work and applied stress on surface oxidation of 304 stainless steel

    Article • Corrosion Science, March 2012, Elsevier

    Professor Sergio Lozano-Perez

  62. Multi-scale characterisation of oxide on zirconium alloys

    Article • Materials at High Temperatures, January 2012, Maney Publishing

    Professor Sergio Lozano-Perez

  63. 3D Visualisation of Crack Distributions in Oxidised Zirconium Alloys by FIB-Slicing

    Article • MRS Proceedings, January 2012, Cambridge University Press

    Professor Sergio Lozano-Perez

  64. Mechanisms of Oxidation of Fuel Cladding Alloys Revealed by High Resolution APT, TEM and SIMS Analysis

    Article • MRS Proceedings, January 2012, Cambridge University Press

    Professor Sergio Lozano-Perez

  65. Focussed ion beam sectioning for the 3D characterisation of cracking in oxide scales formed on commercial ZIRLO™ alloys during corrosion in high temperature pressurised water

    Article • Corrosion Science, December 2011, Elsevier

    Professor Sergio Lozano-Perez

  66. Analysis of local chemical and structural inhomogeneities in FeySe1−xTex single crystals

    Article • Applied Physics Letters, November 2011, American Institute of Physics

    Professor Sergio Lozano-Perez

  67. Analytical characterization of secondary phases and void distributions in an ultrafine-grained ODS Fe–14Cr model alloy

    Article • Journal of Nuclear Materials, October 2011, Elsevier

    Professor Sergio Lozano-Perez

  68. Effects of heavy-ion irradiation on the grain boundary chemistry of an oxide-dispersion strengthened Fe–12wt.% Cr alloy

    Article • Journal of Nuclear Materials, October 2011, Elsevier

    Professor Sergio Lozano-Perez

  69. Studies Regarding Corrosion Mechanisms in Zirconium Alloys

    Article • August 2011, ASTM International

    Professor Sergio Lozano-Perez

  70. Studies Regarding Corrosion Mechanisms in Zirconium Alloys

    Article • August 2011, ASTM International

    Professor Sergio Lozano-Perez

  71. Studies Regarding Corrosion Mechanisms in Zirconium Alloys

    Article • August 2011, ASTM International

    Professor Sergio Lozano-Perez

  72. Studies Regarding Corrosion Mechanisms in Zirconium Alloys

    Article • August 2011, ASTM International

    Professor Sergio Lozano-Perez

  73. Towards an integrated materials characterization toolbox

    Article • Journal of Materials Research, June 2011, Cambridge University Press

    Professor Sergio Lozano-Perez

  74. Stability of nanoscale secondary phases in an oxide dispersion strengthened Fe–12Cr alloy

    Article • Acta Materialia, June 2011, Elsevier

    Professor Sergio Lozano-Perez

  75. Analytical characterisation of oxide dispersion strengthened steels for fusion reactors

    Article • Materials Science and Technology, April 2011, Taylor & Francis

    Professor Sergio Lozano-Perez

  76. Interdiffusion and barrier layer formation in thermally evaporated Mn/Cu heterostructures on SiO2 substrates

    Article • Applied Physics Letters, March 2011, American Institute of Physics

    Professor Sergio Lozano-Perez

  77. Studies Regarding Corrosion Mechanisms in Zirconium Alloys

    Article • Journal of ASTM International, January 2011, ASTM International

    Dr Efthymios Polatidis, Professor Sergio Lozano-Perez

  78. Quantitative EELS analysis of zirconium alloy metal/oxide interfaces

    Article • Ultramicroscopy, January 2011, Elsevier

    Professor Sergio Lozano-Perez

  79. Three-dimensional characterization of stress corrosion cracks

    Article • Journal of Nuclear Materials, January 2011, Elsevier

    Professor Sergio Lozano-Perez

  80. Characterization of Mesoporosity in Ceria Particles Using Electron Microscopy

    Article • Microscopy and Microanalysis, November 2010, Cambridge University Press

    Professor Sergio Lozano-Perez

  81. Characterization of Structure and Damage in Materials in Four Dimensions

    Article • September 2010, Office of Scientific and Technical Information (OSTI)

    Professor Sergio Lozano-Perez

  82. Microstructural characterization by TEM techniques of mechanically alloyed FeNbGe powders

    Article • Journal of Alloys and Compounds, August 2010, Elsevier

    Professor Sergio Lozano-Perez

  83. Stability of nanoparticles in an oxide dispersion strengthened alloy

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  84. Transmission EELS Quantification Study of Oxygen Content at Zirconium Alloy Metal/Oxide Interface

    Article • Microscopy and Microanalysis, July 2010, Cambridge University Press

    Professor Sergio Lozano-Perez

  85. Towards quantitative analysis of core-shell catalyst nano-particles by aberration corrected high angle annular dark field STEM and EDX

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  86. Atom-probe tomography characterization of the oxidation of stainless steel

    Article • Scripta Materialia, June 2010, Elsevier

    Professor Sergio Lozano-Perez

  87. Individual grain boundary properties and overall performance of metal-organic deposition coated conductors

    Article • Physical Review B, May 2010, American Physical Society (APS)

    Professor Sergio Lozano-Perez

  88. Filled and glycosylated carbon nanotubes for in vivo radioemitter localization and imaging

    Article • Nature Materials, May 2010, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  89. Porosity in oxides on zirconium fuel cladding alloys, and its importance in controlling oxidation rates

    Article • Scripta Materialia, April 2010, Elsevier

    Professor Sergio Lozano-Perez

  90. Investigation of grain boundaries for abnormal grain growth in polycrystalline SrTiO3

    Article • Journal of Materials Research, February 2010, Cambridge University Press

    Professor Sergio Lozano-Perez

  91. Characterization techniques for assessing irradiated and ageing materials in nuclear power plant systems, structures and components (SSC)

    Article • January 2010, Elsevier

    Professor Sergio Lozano-Perez

  92. Contributor contact details

    Article • January 2010, Elsevier

    Professor Sergio Lozano-Perez

  93. Nuclear reactor materials at the atomic scale

    Article • Materials Today, November 2009, Elsevier

    Professor Sergio Lozano-Perez

  94. Multi-scale characterization of stress corrosion cracking of cold-worked stainless steels and the influence of Cr content

    Article • Acta Materialia, October 2009, Elsevier

    Professor Sergio Lozano-Perez

  95. Achieving sub-nanometre particle mapping with energy-filtered TEM

    Article • Ultramicroscopy, September 2009, Elsevier

    Professor Sergio Lozano-Perez

  96. Grain Boundary Chemistry Before and After Ion Implantation in ODS Steels

    Article • Microscopy and Microanalysis, July 2009, Cambridge University Press

    Professor Sergio Lozano-Perez

  97. Atom-probe Tomography of Surface Oxides in a 20% Cold Worked Stainless Steel Tested Under PWR Primary Water Conditions

    Article • Microscopy and Microanalysis, July 2009, Cambridge University Press

    Professor Sergio Lozano-Perez

  98. Atom-probe Tomography, Small Angle Neutron Scattering, Transmission Electron Microscopy, Positron Annihilation Spectroscopy and X-ray Absorption Spectroscopy Characterization of Nano-scale Features in Nanostructured Ferritic Alloys

    Article • Microscopy and Microanalysis, July 2009, Cambridge University Press

    Professor Sergio Lozano-Perez

  99. Microstructural evolution characterization of Fe–Nb–B ternary systems processed by ball milling

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, June 2009, Taylor & Francis

    Professor Sergio Lozano-Perez

  100. Microstructural characterization of Y2O3 ODS–Fe–Cr model alloys

    Article • Journal of Nuclear Materials, April 2009, Elsevier

    Professor Sergio Lozano-Perez

  101. Preferential Co partitioning to α-Fe in nanocrystalline CoFeNbB alloys by Mn addition

    Article • Journal of Non-Crystalline Solids, January 2009, Elsevier

    Professor Sergio Lozano-Perez

  102. Using NanoSIMS to map trace elements in stainless steels from nuclear reactors

    Article • Applied Surface Science, December 2008, Elsevier

    Professor Sergio Lozano-Perez

  103. Nanocrystallization effects on the specific heat of Fe–Co–Nb–B amorphous alloy

    Article • Journal of Non-Crystalline Solids, December 2008, Elsevier

    Professor Sergio Lozano-Perez

  104. Understanding stress corrosion cracking with electron tomography

    Article • Microscopy and Microanalysis, August 2008, Cambridge University Press

    Professor Sergio Lozano-Perez

  105. Improving EFTEM data using multivariate statistical analysis

    Article • Journal of Physics Conference Series, August 2008, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  106. Novel characterization of stress corrosion cracks

    Article • Journal of Physics Conference Series, August 2008, Institute of Physics Publishing

    Professor Sergio Lozano-Perez

  107. A guide on FIB preparation of samples containing stress corrosion crack tips for TEM and atom-probe analysis

    Article • Micron, April 2008, Elsevier

    Professor Sergio Lozano-Perez

  108. High-resolution imaging of complex crack chemistry in reactor steels by NanoSIMS

    Article • Journal of Nuclear Materials, February 2008, Elsevier

    Professor Sergio Lozano-Perez

  109. Effects of Ion Irradiation on the Microstructure of an ODS/Fe12Cr Alloy

    Article • MRS Proceedings, January 2008, Cambridge University Press

    Professor Sergio Lozano-Perez

  110. Atom probe tomography today

    Article • Materials Today, December 2007, Elsevier

    Professor Sergio Lozano-Perez

  111. Overview: Recent Progress in Three-Dimensional Atom Probe Instruments and Applications

    Article • Microscopy and Microanalysis, November 2007, Cambridge University Press

    Professor Sergio Lozano-Perez

  112. Multivariate Statistical Analysis of EFTEM data

    Article • Microscopy and Microanalysis, August 2007, Cambridge University Press

    Professor Sergio Lozano-Perez

  113. EFTEM assistant: A tool to understand the limitations of EFTEM

    Article • Ultramicroscopy, April 2007, Elsevier

    Professor Sergio Lozano-Perez

  114. Quantitative EFTEM measurement of the composition of embedded particles

    Article • Journal of Materials Science, July 2006, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  115. Evidence for deformation-induced transformations of Cu-rich precipitates in an aged FeCu alloy

    Article • Philosophical Magazine Letters, June 2006, Taylor & Francis

    Professor Sergio Lozano-Perez

  116. Comparison of the number densities of nanosized Cu-rich precipitates in ferritic alloys measured using EELS and EDX mapping, HREM and 3DAP

    Article • Journal of Materials Science, April 2006, Springer Science + Business Media

    Professor Sergio Lozano-Perez

  117. Determination of the Fe content of embedded Cu-rich particles in ferritic alloys using energy-filtered TEM

    Article • Ultramicroscopy, January 2006, Elsevier

    Professor Sergio Lozano-Perez

  118. EFTEM of Nanoprecipitates: Where Are the Limits?

    Article • Microscopy and Microanalysis, August 2005, Cambridge University Press

    Professor Sergio Lozano-Perez

  119. TEM investigations of intergranular stress corrosion cracking in austenitic alloys in PWR environmental conditions

    Article • Materials at High Temperatures, November 2003, Maney Publishing

    Professor Sergio Lozano-Perez

  120. TEM investigations of intergranular stress corrosion cracking in austenitic alloys in PWR environmental conditions

    Article • Materials at High Temperatures, January 2003, Taylor & Francis

    Professor Sergio Lozano-Perez

  121. Preparation of transmission electron microscopy cross-section specimens of crack tips using focused ion beam milling

    Article • Journal of Microscopy, August 2002, Wiley

    Professor Sergio Lozano-Perez

  122. A study of the fcc (FeCo) 23 B 6 phase in fully crystallized Fe-Co-Nb-B-Cu alloys

    Article • Philosophical Magazine Letters, July 2002, Taylor & Francis

    Professor Sergio Lozano-Perez

  123. Preparation of site specific transmission electron microscopy plan-view specimens using a focused ion beam system

    Article • Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena, January 2001, American Vacuum Society

    Professor Sergio Lozano-Perez

  124. Enthalpy and Curie temperature relaxation effects in FeSiB–CuNb alloys prepared at different quenching rates

    Article • Materials Letters, September 2000, Elsevier

    Professor Sergio Lozano-Perez