All Stories

  1. Modeling the Manufacturing Process of Thin-Walled Composite Parts by Vacuum Infusion Using Controlled External Pressures

    Article • Journal of Composites Science, May 2025, MDPI AG

    Prof. Sergey N. Shevtsov

  2. Modeling of external pressure application to flatten the wall thickness and mechanical properties of thin-walled composite parts manufactured by vacuum infusion technology

    Article • January 2025, American Institute of Physics

    Prof. Sergey N. Shevtsov

  3. Simulation of the Post-Infusion Stage of Vacuum Infusion With Resin Injection Gates Locked

    Article • Procedia Computer Science, January 2025, Elsevier

    Prof. Sergey N. Shevtsov

  4. Investigation of Low-Frequency Acoustic NDE to Detect Delaminations in Multilayer Polymer-Composite Structures

    Article • January 2025, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  5. Modeling of low-frequency acoustic NDE to detect delaminations in multilayer polymer-composite structures

    Article • Academia Materials Science, October 2024, Academia.edu

    Prof. Sergey N. Shevtsov

  6. Simulation Based Optimization of Sequential Vacuum Infusion with Controlled Post-Infusion Stage for Thin-Walled Composite Parts Forming

    Article • July 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  7. Numerical Study of Thin-Walled Polymer Composite Part Quality When Manufactured Using Vacuum Infusion with Various External Pressure Controls

    Article • Polymers, February 2024, MDPI AG

    Prof. Sergey N. Shevtsov

  8. Delamination Detection in a Multilayer Carbon Fiber Reinforced Plate Based on Acoustic Methods: Numerical and Experimental Study

    Article • January 2024, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  9. Application of KNN and ANN Metamodeling for RTM Filling Process Prediction

    Article • Materials, September 2023, MDPI AG

    Prof. Sergey N. Shevtsov

  10. DM-MIMO Based GFDM Advanced Underwater Image Transmission Scheme

    Article • January 2023, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  11. The quality of holes drilled in the helicopter rotor blades made of GFRP-Ti multilayer composite.

    Article • Journal of Composites Science, December 2022, MDPI AG

    Prof. Sergey N. Shevtsov

  12. Optimization the post-infusion effect of controlled pressure on a preform after the resin filling

    Article • Journal of Composites Science, November 2022, MDPI AG

    Prof. Sergey N. Shevtsov

  13. ANN Based Estimation of the Defects Severity at the Drilling of GFRP/Ti Multilayered Composite Structure

    Article • November 2022, MDPI AG

    Prof. Sergey N. Shevtsov

  14. Multi-Criteria Decision Approach to Design a Vacuum Infusion Process Layout Providing the Polymeric Composite Part Quality

    Article • Polymers, January 2022, MDPI AG

    Prof. Sergey N. Shevtsov

  15. Generalized Frequency Division Multiplexing-Based Low-Power Underwater Acoustic Image Transceiver

    Article • Sensors, December 2021, MDPI AG

    Prof. Sergey N. Shevtsov

  16. Evaluation of the vacuum infusion process objectives at the early stages of computer simulation

    Article • Journal of Physics Conference Series, November 2021, Institute of Physics Publishing

    Prof. Sergey N. Shevtsov

  17. On Predictive Evaluation of Sub-Objectives for Quality Assurance of Vacuum Assisted Resin Infusion of Large Composite Structures

    Article • October 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  18. Numerical Optimization of Vacuum Assisted Manufacturing of Aircraft Composite Parts Using the Predictive Assessment of Objectives

    Article • July 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  19. Two-stage numerical approach for reliable recognition of dry spots at the VAP infusion of large composite parts of complex shape

    Article • Composite Structures, March 2021, Elsevier

    Prof. Sergey N. Shevtsov

  20. Space Time Block Code Based FBMC Advanced Underwater Image Communication Technology

    Article • January 2021, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  21. Experimental and Numerical Study of Vacuum Resin Infusion for Thin-Walled Composite Parts

    Article • Applied Sciences, February 2020, MDPI AG

    Prof. Sergey N. Shevtsov

  22. On the Directivity of Lamb Waves Generated by Wedge PZT Actuator in Thin CFRP Panel

    Article • Materials, February 2020, MDPI AG

    Prof. Sergey N. Shevtsov

  23. Direct Mapping Based FBMC-LDPC Advanced Underwater Acoustic Transmission Scheme for Data Signals

    Article • January 2020, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  24. Direct-Mapping-Based MIMO-FBMC Underwater Acoustic Communication Architecture for Multimedia Signals

    Article • Applied Sciences, December 2019, MDPI AG

    Prof. Sergey N. Shevtsov

  25. On the Directivity of Acoustic Waves Generated by the Angle Beam Wedge Actuator in Thin-Walled Structures

    Article • Actuators, September 2019, MDPI AG

    Prof. Sergey N. Shevtsov

  26. Piezoelectric Based Lamb Waves Generation and Propagation in Orthotropic CFRP Plates: I. Influence of Material Damping

    Article • Materials Science Forum, July 2019, Trans Tech Publications

    Prof. Sergey N. Shevtsov, Valerii Chebanenko

  27. Piezoelectric Based Lamb Waves Generation and Propagation in Orthotropic CFRP Plates: II. Influence of Interfacial Stress Distribution

    Article • Materials Science Forum, July 2019, Trans Tech Publications

    Prof. Sergey N. Shevtsov, Valerii Chebanenko

  28. Optimization of Lay-Up Stacking for a Loaded-Carrying Slender Composite Beam

    Article • January 2019, IntechOpen

    Prof. Sergey N. Shevtsov

  29. Propagation of Lamb waves generated by the angle beam wedge actuator in the plastic panel

    Article • January 2019, American Institute of Physics

    Prof. Sergey N. Shevtsov

  30. Direct Mapping FBMC Based Underwater Transmission Scheme for Audio Signals

    Article • January 2019, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  31. Multiobjective Optimization of the Cantilever Type PEG with the Added Mass

    Article • December 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  32. Model-based multi-objective optimization of cure process control for a large CFRP panel

    Article • Engineering Computations, April 2018, Emerald

    Prof. Sergey N. Shevtsov

  33. Piezoelectric Actuators and Generators for Energy Harvesting

    Article • January 2018, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  34. The energy based characteristics of sperm whale clicks using the Hilbert Huang transform analysis method

    Article • The Journal of the Acoustical Society of America, August 2017, Acoustical Society of America (ASA)

    Prof. Sergey N. Shevtsov

  35. Optimal cure control synthesis for FEM model of aircraft composite part with CAD imported geometry

    Article • May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  36. FEM model-based optimal control synthesis for curing a large composite structure with CAD imported geometry

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Prof. Sergey N. Shevtsov

  37. IMF Features of BCI FP1 EEG Signal Using EMD Methods for Cerebral Palsy

    Article • January 2017, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  38. Optimization of wall thickness and lay-up for the shell-like composite structure loaded by non-uniform pressure field

    Article • January 2017, American Institute of Physics

    Prof. Sergey N. Shevtsov

  39. Modeling and optimization of two-stage composite cure with the use open-mold tooling

    Article • July 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  40. Modeling of vibration energy harvesting system with power PZT stack loaded on Li-Ion battery

    Article • International Journal of Hydrogen Energy, April 2016, Elsevier

    Prof. Sergey N. Shevtsov

  41. Повышение производительности обработки и качества отверстий в слои-стом армированном титаном стеклопластике за счет снижения виброак-тивности процесса сверления

    Article • Advanced Engineering Research, January 2016, Infra-M Academic Publishing House

    Prof. Sergey N. Shevtsov

  42. Material Distribution Optimization for the Shell Aircraft Composite Structure

    Article • Curved and Layered Structures, January 2016, De Gruyter

    Prof. Sergey N. Shevtsov

  43. Random Vibration Energy Harvesting by Piezoelectric Stack Charging the Battery

    Article • Procedia Engineering, January 2016, Elsevier

    Prof. Sergey N. Shevtsov

  44. Optimized Design of the Wind Turbine’s Composite Blade to Flatten the Stress Distribution in the Mounting Areas

    Article • January 2016, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  45. HHT-Based Time-Frequency Features in the Berardius Baird Whistles

    Article • December 2015, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  46. Optimization of the Electric Power Harvesting System Based on the Piezoelectric Stack Transducer

    Article • December 2015, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  47. A Probabilistic Approach to the Crack Identification in a Beam-like Structure Using Monitored Mode Shapes and Their Curvature Data with Uncertainty

    Article • July 2015, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  48. Compression Molding Cure Cycle Modelling and Optimization for Large Polymeric Composite Parts Processing

    Article • Applied Mechanics and Materials, July 2015, Trans Tech Publications

    Prof. Sergey N. Shevtsov

  49. The Multiobjective Design Optimization of pMUT Hydrophone

    Article • Applied Mechanics and Materials, January 2015, Trans Tech Publications

    Prof. Sergey N. Shevtsov

  50. Model-Based Optimal Control of Polymeric Composite Cure in Autoclave System

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Prof. Sergey N. Shevtsov

  51. Multiobjective Pareto-Based Optimization of pMUT Hydrophone With Piezoelectric Active Diaphragm

    Article • July 2014, ASME International

    Prof. Sergey N. Shevtsov

  52. Identification of thermoset resin cure kinetics using DSC and genetic algorithm

    Article • April 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  53. Mechanical Testing of Polymeric Composites for Aircraft Applications: Standards, Requirements and Limitations

    Article • January 2014, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  54. Multi-Objective Optimization of Distributed RTM (Resin Transfer Molding) Process for Curing the Large Composite Structures with Varied Thickness

    Article • January 2014, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  55. On a deformation sign for identifying defects on the basis of the analysis of the forms of the natural vibrations of a cantilever with a notch

    Article • Russian Journal of Nondestructive Testing, October 2013, Pleiades Publishing Ltd

    Prof. Sergey N. Shevtsov

  56. Distributed model based thermal control for optimal curing of the large composite structures

    Article • June 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Sergey N. Shevtsov

  57. Structural Optimization of MEMS-Based Hydrophones with Perforated Active Membrane

    Article • Applied Mechanics and Materials, February 2013, Trans Tech Publications

    Prof. Sergey N. Shevtsov

  58. Structural Optimization of Power Flextensional Piezoelectric Actuator using FE Model and Genetic Algorithm

    Article • January 2013, ACTA Press

    Prof. Sergey N. Shevtsov

  59. Optimization of the Composite Cure Process Based on the Thermo-Kinetic Model

    Article • Advanced Materials Research, September 2012, Trans Tech Publications

    Prof. Sergey N. Shevtsov

  60. An approach to the problem of damage identification in an elastic rod based on the Timoshenko beam model

    Article • Russian Journal of Nondestructive Testing, July 2011, Pleiades Publishing Ltd

    Prof. Sergey N. Shevtsov

  61. Correlations between parameters of acoustic-emission signals and corrosion damage in aluminum alloys

    Article • Russian Journal of Nondestructive Testing, June 2007, Pleiades Publishing Ltd

    Prof. Sergey N. Shevtsov

  62. Influence of the geometry and connection of electrodes on electromechanical characteristics of frequency-tuned disk piezoelectric elements

    Article • Russian Journal of Nondestructive Testing, May 2006, Pleiades Publishing Ltd

    Prof. Sergey N. Shevtsov

  63. Relaxation of residual stresses caused by external cyclic loads on the basis of a kinetic approach

    Article • Soviet Materials Science, January 1985, Springer Science + Business Media

    Prof. Sergey N. Shevtsov

  64. The Neural Networks Approach to Identification of Local Damages in Elastic Structures

    Article • Springer Science + Business Media

    Prof. Sergey N. Shevtsov