All Stories

  1. In Situ X-ray Spectroscopic Identification and Kinetic Control of Highly Hybridized Co(IV) States in Cobalt Oxide Amorphous Catalysts
  2. Revealing the Effect of Bond Length of Amorphous Iridium Oxide via Redox Control for Oxygen Evolution Reaction Electrocatalysis
  3. Wedge-Confined Freezing-Front Engineering of Ordered Hollow Carbon Arrays with Atomically Dispersed Co Sites for Zinc-Air Batteries
  4. Inverted carbon-shell iridium-core mesoporous structured electrocatalyst for HER
  5. Ester-Guided Dynamic Li+ Solvation Enables Plating-Less, Fast-Charging Li-Ion Batteries
  6. Investigating the effect of heterogeneities across the electrode|multiphase polymer electrolyte interfaces in high-potential lithium batteries
  7. Understanding improved cycling and thermal stability of compositionally graded Ni-rich layered LiNi0.6Mn0.2Co0.2O2 cathode materials
  8. Revealing Dynamic Evolution of the Anode‐Electrolyte Interphase in All‐Solid‐State Batteries with Excellent Cyclability
  9. Amorphous-crystalline transition-driven synthesis of Co single-atom catalysts on MoO3 for enhanced hydrogen evolution in acidic and alkaline media
  10. Atomic insights into the oxidative degradation mechanisms of sulfide solid electrolytes
  11. Fast charge induced phase evolution and element contribution of nickel-rich layered cathode for lithium-ion batteries
  12. Monometallic and bimetallic metal–organic frameworks derived CoP embedded in porous carbon: Monodisperse CoP nanoparticles for highly reversible potassium ion storage
  13. Degradation of Lithium Iron Phosphate Sulfide Solid-State Batteries by Conductive Interfaces
  14. Fundamental mechanistic insights into the catalytic reactions of Li─S redox by Co single-atom electrocatalysts via operando methods
  15. Simulated sulfur K-edge X-ray absorption spectroscopy database of lithium thiophosphate solid electrolytes
  16. Evidence of Zintl Intermediate Phase and Its Impacts on Li and Na Storage Performance of Pb-Based Alloying Anodes
  17. Boosting the interfacial superionic conduction of halide solid electrolytes for all-solid-state batteries
  18. Understanding Electrochemical Reaction Mechanisms of Sulfur in All‐Solid‐State Batteries through Operando and Theoretical Studies **
  19. Resolution-enhanced X-ray fluorescence microscopy via deep residual networks
  20. Identification and Catalysis of the Potential-Limiting Step in Lithium-Sulfur Batteries
  21. High Current‐Density‐Charging Lithium Metal Batteries Enabled by Double‐Layer Protected Lithium Metal Anode
  22. Dual Passivation of Cathode and Anode through Electrode–Electrolyte Interface Engineering Enables Long-Lifespan Li Metal–SPAN Batteries
  23. Self-standing Co2.4Sn0.6O4 nano rods as high performance anode materials for sodium-ion battery and investigation on its reaction mechanism
  24. Carbon-free high-performance cathode for solid-state Li-O 2 battery
  25. Hybrid MoS2+x Nanosheet/Nanocarbon Heterostructures for Lithium-Ion Batteries
  26. Investigation of Ca Insertion into α-MoO3 Nanoparticles for High Capacity Ca-Ion Cathodes
  27. Isoxazole-Based Electrolytes for Lithium Metal Protection and Lithium-Sulfurized Polyacrylonitrile (SPAN) Battery Operating at Low Temperature
  28. Surface Redox Pseudocapacitance of Partially Oxidized Titanium Carbide MXene in Water-in-Salt Electrolyte
  29. Reversible dual anionic-redox chemistry in NaCrSSe with fast charging capability
  30. Understanding the Roles of the Electrode/Electrolyte Interface for Enabling Stable Li∥Sulfurized Polyacrylonitrile Batteries
  31. Hierarchical nickel valence gradient stabilizes high-nickel content layered cathode materials
  32. Identification of LiH and nanocrystalline LiF in the solid–electrolyte interphase of lithium metal anodes
  33. In Situ ATR‐FTIR Study of the Cathode–Electrolyte Interphase: Electrolyte Solution Structure, Transition Metal Redox, and Surface Layer Evolution
  34. Biomimetic composite architecture achieves ultrahigh rate capability and cycling life of sodium ion battery cathodes
  35. Understanding the Mechanism of High Capacitance in Nickel Hexaaminobenzene-Based Conductive Metal–Organic Frameworks in Aqueous Electrolytes
  36. Structural Stabilization of P2‐type Sodium Iron Manganese Oxides by Electrochemically Inactive Mg Substitution: Insights of Redox Behavior and Voltage Decay
  37. Reversible Dual Anionic-Redox Chemistry in NaCrSSe with Fast Charging Capability
  38. Revealing Reaction Pathways of Collective Substituted Iron Fluoride Electrode for Lithium Ion Batteries
  39. Synchrotron Operando Depth Profiling Studies of State-of-Charge Gradients in Thick Li(Ni0.8Mn0.1Co0.1)O2 Cathode Films
  40. Sodium storage property and mechanism of NaCr1/4Fe1/4Ni1/4Ti1/4O2 cathode at various cut-off voltages
  41. Reaction heterogeneity in practical high-energy lithium–sulfur pouch cells
  42. Anionic redox reaction in layered NaCr2/3Ti1/3S2 through electron holes formation and dimerization of S–S
  43. Improving the Electrochemical Performance and Structural Stability of the LiNi0.8Co0.15Al0.05O2 Cathode Material at High-Voltage Charging through Ti Substitution
  44. Activating Layered Double Hydroxide with Multivacancies by Memory Effect for Energy-Efficient Hydrogen Production at Neutral pH
  45. Reversible Conversion Reactions and Small First Cycle Irreversible Capacity Loss in Metal Sulfide‐Based Electrodes Enabled by Solid Electrolytes
  46. Synthesis and Characterization of a Molecularly Designed High‐Performance Organodisulfide as Cathode Material for Lithium Batteries
  47. Anomalous metal segregation in lithium-rich material provides design rules for stable cathode in lithium-ion battery
  48. High‐Voltage Charging‐Induced Strain, Heterogeneity, and Micro‐Cracks in Secondary Particles of a Nickel‐Rich Layered Cathode Material
  49. Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation
  50. Optimizing PtFe intermetallics for oxygen reduction reaction: from DFT screening to in situ XAFS characterization
  51. Rational Design of Hierarchically Open‐Porous Spherical Hybrid Architectures for Lithium‐Ion Batteries
  52. Confinement of Ultrasmall Cobalt Oxide Clusters within Silicalite-1 Crystals for Efficient Conversion of Fructose into Methyl Lactate
  53. Atomically dispersed Mo catalysts for high‐efficiency ambient N2 fixation
  54. Native Vacancy Enhanced Oxygen Redox Reversibility and Structural Robustness
  55. Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release
  56. In situ/operando synchrotron-based X-ray techniques for lithium-ion battery research
  57. Introducing Fe2+ into Nickel-Iron Layered Double Hydroxide: Local Structure Modulated Water Oxidation Activity
  58. High energy-density and reversibility of iron fluoride cathode enabled via an intercalation-extrusion reaction
  59. Advanced Characterization Techniques for Sodium-Ion Battery Studies
  60. Self-assembled Li 3 V 2 (PO 4 ) 3 /reduced graphene oxide multilayer composite prepared by sequential adsorption
  61. Na-Ion Intercalation and Charge Storage Mechanism in 2D Vanadium Carbide
  62. Utilizing Co2+ /Co3+ Redox Couple in P2-Layered Na0.66 Co0.22 Mn0.44 Ti0.34 O2 Cathode for Sodium-Ion Batteries
  63. Electronic structural studies on the improved thermal stability of Li(Ni0.8Co0.15Al0.05)O2 by ZrO2 coating for lithium ion batteries
  64. Suppressing the chromium disproportionation reaction in O3-type layered cathode materials for high capacity sodium-ion batteries
  65. Explore the Effects of Microstructural Defects on Voltage Fade of Li- and Mn-Rich Cathodes
  66. Quantification of Honeycomb Number-Type Stacking Faults: Application to Na3Ni2BiO6Cathodes for Na-Ion Batteries
  67. High-Rate Charging Induced Intermediate Phases and Structural Changes of Layer-Structured Cathode for Lithium-Ion Batteries
  68. Strategies to curb structural changes of lithium/transition metal oxide cathode materials & the changes’ effects on thermal & cycling stability
  69. Scalable fabrication of micron-scale graphene nanomeshes for high-performance supercapacitor applications
  70. Utilizing Environmental Friendly Iron as a Substitution Element in Spinel Structured Cathode Materials for Safer High Energy Lithium-Ion Batteries
  71. Investigating the Reversibility of Structural Modifications of LixNiyMnzCo1–y–zO2Cathode Materials during Initial Charge/Discharge, at Multiple Length Scales
  72. Using Real-Time Electron Microscopy To Explore the Effects of Transition-Metal Composition on the Local Thermal Stability in Charged LixNiyMnzCo1–y–zO2Cathode Materials
  73. Inside Cover: High-Surface-Area Nitrogen-Doped Reduced Graphene Oxide for Electric Double-Layer Capacitors (ChemSusChem 11/2015)
  74. Probing the Mechanism of High Capacitance in 2D Titanium Carbide Using In Situ X-Ray Absorption Spectroscopy
  75. High-Surface-Area Nitrogen-Doped Reduced Graphene Oxide for Electric Double-Layer Capacitors
  76. Unveiling Surface Redox Charge Storage of Interacting Two-Dimensional Heteronanosheets in Hierarchical Architectures
  77. Direct Observation of the Redistribution of Sulfur and Polysufides in Li-S Batteries During the First Cycle by In Situ X-Ray Fluorescence Microscopy
  78. Thermal stability in the blended lithium manganese oxide – Lithium nickel cobalt manganese oxide cathode materials: An in situ time-resolved X-Ray diffraction and mass spectroscopy study
  79. Correction to Investigating the Local Degradation and Thermal Stability of Charged Ni-Based Cathode Materials through Real Time Electron Microscopy
  80. O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries
  81. Structural Changes and Thermal Stability of Charged LiNixMnyCozO2 Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass Spectroscopy
  82. One-step preparation of reduced graphene oxide/carbon nanotube hybrid thin film by electrostatic spray deposition for supercapacitor applications
  83. Investigating Local Degradation and Thermal Stability of Charged Nickel-Based Cathode Materials through Real-Time Electron Microscopy
  84. Improved high-voltage performance of FePO4-coated LiCoO2 by microwave-assisted hydrothermal method
  85. SYNTHESIS OF HYDROUS RUTHENIUM OXIDE NANOPARTICLES IN SUB- AND SUPERCRITICAL WATER AND THEIR CAPACITIVE PROPERTIES
  86. Oxygen-Release-Related Thermal Stability and Decomposition Pathways of LixNi0.5Mn1.5O4Cathode Materials
  87. Structural Changes in Reduced Graphene Oxide upon MnO2 Deposition by the Redox Reaction between Carbon and Permanganate Ions
  88. Soft templated mesoporous manganese oxide/carbon nanotube composites via interfacial surfactant assembly
  89. Understanding the Rate Capability of High-Energy-Density Li-Rich Layered Li1.2 Ni0.15 Co0.1 Mn0.55 O2 Cathode Materials
  90. Reduced Graphene Oxide
  91. Cathode Materials: Combining In Situ Synchrotron X-Ray Diffraction and Absorption Techniques with Transmission Electron Microscopy to Study the Origin of Thermal Instability in Overcharged Cathode Materials for Lithium-Ion Batteries (Adv. Funct. Mater. 8/
  92. Correlating Structural Changes and Gas Evolution during the Thermal Decomposition of Charged LixNi0.8Co0.15Al0.05O2Cathode Materials
  93. Phase transition behavior of NaCrO2 during sodium extraction studied by synchrotron-based X-ray diffraction and absorption spectroscopy
  94. Combining In Situ Synchrotron X-Ray Diffraction and Absorption Techniques with Transmission Electron Microscopy to Study the Origin of Thermal Instability in Overcharged Cathode Materials for Lithium-Ion Batteries
  95. Spinel LiMn2O4/reduced graphene oxide hybrid for high rate lithium ion batteries
  96. Mesoporous nickel/carbon nanotube hybrid material prepared by electroless deposition
  97. Solid-state microwave irradiation synthesis of high quality graphenenanosheets under hydrogen containing atmosphere
  98. Li4Ti5O12/reduced graphite oxide nano-hybrid material for high rate lithium-ion batteries
  99. Nano-sized lithium manganese oxide dispersed on carbon nanotubes for energy storage applications