All Stories

  1. Electro-chemo-mechanical properties of anodic oxide (passive) films formed on metals.
  2. Stress variations caused by growth of anodic oxide film on iron
  3. Correlation between electrochemical and mechanical properties of solid electrode surfaces.
  4. Special issue on Recent advances in corrosion science: celebrating the 90th birthday of Professor Norio Sato
  5. Inhibition effect of underpotential deposition of metallic cations on aqueous corrosion of metals
  6. Effect of Pb-underpotential deposition on anodic dissolution and passivation of pure Fe and Fe-Ni alloys in acidic perchlorate solution
  7. Effect of Sn2+on Anodic Dissolution of Ni in Perchloric Acid
  8. Underpotential Deposition and Metallic Corrosion Reaction
  9. Mechano-electrochemistry of a passive surface using an in situ micro-indentation test
  10. Nanoporous Au−Pt Alloys As Large Strain Electrochemical Actuators
  11. Depassivation–repassivation behavior of type-312L stainless steel in NaCl solution investigated by the micro-indentation
  12. Reactivity imaging of a passive ferritic FeAlCr steel
  13. Changes in Surface Stress of Au Electrode during Underpotential Deposition of Bi and Pb.
  14. A numerical model for current transients during micro-indentation of passive iron surface
  15. Current transients during repeated micro-indentation test of passive iron surface in pH 8.4 borate buffer solution
  16. Changes in surface stress of gold electrode during underpotential deposition of copper
  17. Nano-scratching in solution to the single-crystal Ta (100) subjected to anodic oxidation
  18. Current transients of passive iron observed during micro-indentation in pH 8.4 borate buffer solution
  19. Selective formation of porous layer on n-type InP by anodic etching combined with scratching
  20. Hydrogen absorption monitoring of sputter-deposited Ti film in seawater
  21. Cathodic reduction of the duplex oxide films formed on copper in air with high relative humidity at 60°C
  22. Simultaneous oscillations of surface energy, superficial mass and electrode potential in the course of galvanostatic oxidation of formic acid
  23. Potential dependence of normalized friction coefficient of passive iron surface evaluated by nano-scratching in solution
  24. Performance of a microelectrode vibrating above an insulator surface
  25. Cathodic dissolution behavior of an aluminum wire electrode in solutions containing borate and sulfate ions
  26. Changes in Surface Stress of Gold Electrode during Underpotential Deposition of Pb
  27. Determination of the Reduction Sequence in Cathodic Reduction of Duplex Copper Oxide Films Formed in Air
  28. Corrosion behavior of iron thin film in deaerated phosphate solutions by an electrochemical quartz crystal microbalance
  29. Study on initiation of localised corrosion on copper thin film electrode by combinational use of an EQCM with a liquid-phase ion gun
  30. Nano-mechano-electrochemical properties of passive titanium surfaces evaluated by in-situ nano-indentation and nano-scratching
  31. Effect of hydrogen on stresses in anodic oxide film on titanium
  32. Corrosion behavior of titanium-clad carbon steel in weakly alkaline solutions
  33. Changes in Surface Stress of Platinum Electrode in Acidic and Alkaline Sulfate or Alkaline Fluoride Solutions
  34. Effect of Applied Potential Steps on Stresses of Anodic Oxide Film on Nickel
  35. Mechanoelectrochemical Properties of Passive Iron Surfaces Evaluated by an In Situ Nanoscratching Test
  36. Direct Plating of Electroless Ni-P Layers on Sputter-Deposited Al-Ni Alloy Films
  37. Study of cathodic dissolution of an aluminum wire electrode using ac resistometry
  38. Nano-indentation to the Passive Metal Surfaces in Solution
  39. Effects of dichromate treatment on mechanical properties of passivated single crystal iron () and () surfaces
  40. Application of AC resistmetry to monitoring of localized corrosion of iron
  41. Hydrogen generation from a single crystal magnetite coupled galvanically with a carbon steel in sulfate solution
  42. Scanning Electrochemical Microscopic Study of Detecting Non-homogeneity in Surface Reactions of Metals.
  43. Characterisation of Pd electrode surface modified by phase transformation-induced plastic deformation using fractal geometry
  44. An SECM observation of dissolution distribution of ferrous or ferric ion from a polycrystalline iron electrode
  45. Nano-mechano-electrochemistry of passive metal surfaces
  46. Transport of alkaline cation and neutral species through the α-Ni(OH)2/γ-NiOOH film electrode
  47. Analysis of stresses generated during hydrogen transport through a Pd foil electrode under potential sweep conditions
  48. Changes in electrochemical properties of the anodic oxide film formed on titanium during potential sweep
  49. Analysis of anodic current transient and beam deflection transient simultaneously measured from Pd foil electrode pre-charged with hydrogen
  50. Initiation of a Local Breakdown of Passive Film on Iron due to Chloride Ions Generated by a Liquid-Phase Ion Gun
  51. Double Zincate Pretreatment of Sputter-Deposited Al Films
  52. Cathodic Decomposition and Anodic Dissolution and Changes in Surface Morphology of n-Type InP in HCl
  53. A Scanning Electrochemical Microscopic Observation of Heterogeneous Oxygen Evolution on a Polycrystalline Titanium during Anodic Oxidation
  54. Formation and corrosion of InP/In contacts in hydrochloric acid
  55. On the electrochemical applications of the bending beam method
  56. Changes in the properties of anodic oxide films formed on titanium during long-term immersion in deaerated neutral solutions
  57. The link between the relative surface excesses determined by thermodynamic means and the surface excess concentration determined by the radiotracer method
  58. Simultaneous Oscillations of Surface Stress and Potential in the Course of Galvanostatic Oxidation of Formic Acid
  59. Heterogeneous Growth of Anodic Oxide Film on a Polycrystalline Titanium Electrode Observed with a Scanning Electrochemical Microscope
  60. Use of a Liquid-Phase Ion Gun for Local Breakdown of the Passive Film on Iron
  61. Stresses of a Titanium Thin-Film Electrode Generated during Anodic Oxidation by a Beam-Bending Method
  62. Double Zincate Pretreatment of Al Alloy in a LiOH-based Zincate Solution.
  63. Influence of the Fe(CN)<sub>6</sub><sup>3−</sup>/Fe(CN)<sub>6</sub><sup>4−</sup> Redox Reaction on the Changes in Surface Energy of a Gold Electrode in Perchlorate Solution with Iodide Ions
  64. Nano-mechano-electrochemistry of the iron (100) surface in solution
  65. Electrochromism of anodic oxide film on TiN coating in aqueous and non-aqueous electrolytes
  66. Localised investigation of coarse grain gold with the scanning droplet cell and by the Laue method
  67. An agar-based silver|silver chloride reference electrode for use in micro-electrochemistry
  68. Study of Adsorption of Iodide Ions on Gold Electrode by a Laser‐Beam Deflection Method Compared with a Piezoelectric Technique
  69. Application of Quartz Crystal Microbalance to Corrosion Research
  70. Characterization of anodic oxide film formed on tin coating in neutral borate buffer solution
  71. Comparative Study between Bromine and Iodine Adlayers on a Polycrystalline Gold Electrode by a Piezoelectric Technique
  72. Formation of Al/(Ti, Nb, Ta)‐Composite Oxide Films on Aluminum by Pore Filling
  73. Tunneling spectroscopy of passive films on iron and titanium
  74. Formation and Breakdown of Anodic Oxide Films on Aluminum in Boric Acid/Borate Solutions
  75. In situ simultaneous measurement with ir-ras and qcm for investigation of corrosion of copper in a gaseous environment
  76. The Metabolism of Sulfate-reducing Bacteria and Corrosion Behavior of Carbon Steel in the Continuous Culturing Medium
  77. Surface Pretreatment Effects on Zn Deposition in Zincate Process of Aluminum Alloy.
  78. Pursuit of Electronic Property Change of the Passive Film on Titanium
  79. Trial for Evaluation of Heterogeneity of Passive Film on Iron by a Scanning Electrochemical Microscope
  80. Piezoelectric Detection of Changes in Surface Energy of Gold Electrode in Perchlorate Solutions Containing Iodide Ions
  81. Corrosion Behavior of Carbon Steel Exposed for Long Time to an Inoculation Medium of Sulfate-reducing Bacteria
  82. Metabolism of Pure Sulfate-reducing Bacteria in the Presence of Ferrous Ions and Environmental Changes of the Medium
  83. Measurement of a Trace Amount of Corrosion by a Quartz Crystal Microbalance.
  84. Microvisualization of Corrosion.
  85. An EQCM Study on Corrosion of Iron Thin Film in Deaerated Neutral Solutions
  86. A quartz crystal microbalance study of the corrosion of iron thin films in neutral aqueous solutions
  87. Surface reactions on palladium hydride in vacuum, air and water studied in situ with mass spectrometry
  88. A combined piezoelectric and EQCM study of underpotential deposition of silver on gold electrodes
  89. The cathodic polarization of aluminum covered with anodic oxide films in a neutral borate solution—II. Film breakdown and pit formation
  90. Electroluminescence from p-type silicon during anodic oxidation in ethylene glycol solution
  91. The cathodic polarization of aluminum covered with anodic oxide films in a neutral borate solution—I. The mechanism of rectification
  92. Anodic Oxidation of Valve Metals and Structure of Anodic Oxide Films.
  93. Anodizing of Aluminum Coated with Thermal Oxide Films. Effect of Anodizing Temperature on the Formation of Anodic Oxide Films.
  94. Special Issue/Trends and Future of Corrosion Measurement Techniques. Quartz Crystal Microbalance.
  95. Piezoelectric response to changes in surface stress of a palladium electrode in perchloric acid solution containing chloride ions
  96. Acoustic emission from a palladium electrode during hydrogen charging and its release in a LiOH electrolyte
  97. Study on Anodic Deposition of Ferrous Ions on Gold by a Quartz Crystal Microbalance
  98. Piezoelectric Response to Surface Stress Change of a Palladium Electrode in Sulfate Aqueous Solutions
  99. Surface reactions at 300–750 K in the iron-oxygen-water system studied by SIMS
  100. Comparison of stress corrosion cracking susceptibility of austenitic and ferritic stainless steels in small punch testing
  101. Piezoelectric Detection of Oxide Formation and Reduction on Platinum Electrodes
  102. The Effect of Copper-Addition on Electrochemical Behavior and Surface Composition of Ferritic Stainless Steel in Sulfuric Acid Solution
  103. Hydrogen Evolution Kinetics in Corrosion of Copper, Iron and Zinc in Water
  104. Measurement of absorption of hydrogen and deuterium into palladium during electrolysis by a quartz crystal microbalance
  105. Piezoelectric Response to Specific Adsorption of Chloride Ions on Gold Electrode
  106. Piezoelectric response to surface stress change of iron and copper electrodes covered with oxide films
  107. In-situ gravimetry of passivation of copper by means of quartz crystal microbalance
  108. Measurement of minute corrosion of copper thin film by a quartz crystal microbalance.
  109. Measurements of a Trace Amount of Corrosion by QCM and SAW Techniques
  110. Piezoelectric detection of interfacial change of gold electrode in relation to underpotential deposition of copper
  111. Photoacoustic study on cathodic reduction of anodic oxide films formed on copper in borate solution
  112. Depth-profiling of metal oxide films prepared with MOCVD
  113. Piezoelectric Response to Surface Stress Change of Gold Electrode in Sulfate Aqueous Solutions
  114. Theoretical approach to corrosion resistivity of alloys
  115. The dissolution behaviour of iron, chromium, molybdenum and copper from pure metals and from ferritic stainless steels
  116. Surface stress measurement of solid electrode.
  117. Piezoelectric Response to Surface Stress Change of Platinum Electrode
  118. Selective oxidation of FeCr alloys in the 295?450 K temperature range
  119. Selective oxidation of Fe-30Cr at low temperatures: 743?823 K
  120. The influence of minor alloying elements (Nb, Ti and Cu) on the corrosion resistivity of ferritic stainless steel in sulfuric acid solution
  121. Electrochemical Behavior and Surface Composition of Copper Containing Ferritic Stainless Steel in Sulfuric Acid Solution
  122. Depth-profiling of Surface Oxide Film/Metal Systems
  123. Surface analyses of anodic oxides films formed on Fe-3% Ti alloy
  124. Selective oxidation of Fe-30Ni alloy in a low-temperature range (433?473 K)
  125. Ellipsometry and Auger Analysis of Chromium Surfaces Passivated in Acidic and Neutral Aqueous Solutions
  126. Differential Composition Profiles of Passive Films on Inconel 600 and Incoloy 800 Alloys
  127. Surface Characterization of Stainless Steels Prepared with Various Surface Treatments
  128. Auger and XPS Analyses of Anodic Oxide Films on Molybdenum in the Transpassive Region
  129. Estimation of Surface Excess from Compositional Depth Profiles of Iron-base Alloys Passivated in Sulfuric Acid Solution
  130. Differential composition profiles in depth of thin anodic oxide films on iron-chromium alloy
  131. An Auger Analysis of Passive Films Formed on Fe–5Mo Alloy and Pure Iron in Neutral Aqueous Solution
  132. In-depth profiles of anodic oxide films on FeNi alloy in boric acid-sodium borate solutions
  133. Differential Composition Profiles in Depth of Passive Films on Iron-base Alloys
  134. Surface Polishing and Surface Composition of Fe-Cr Alloys
  135. Auger analysis of the anodic oxide film on iron in neutral solution
  136. An AES analysis of oxide films on iron
  137. Dissolution of Hydrous Metal Oxides in Acid Solutions
  138. Dissolution of Hydrous Chromium Oxide in Acid Solutions
  139. Chemical shifts in the auger spectra of passive films
  140. Correlation between Thermodynamic Quantities of Adsorbed Oxygen and Selectivity for Ethylene-Oxide Formation on Silver
  141. Chemically stimulated exo-electron emission from silver catalyst during partial oxidation of ethylene
  142. Chemically Stimulated Exo-emission from a Silver Catalyst