Contact

All Stories

  1. Finite Element Thermal Simulation and Experimental Study of Laser Beam Welded Hastelloy X Joints

    Article • Journal of Materials Engineering and Performance, March 2026, Springer Science + Business Media

    Dr Senthil Murugan S

  2. PERFORMANCE AND EMISSION ANALYSIS OF A CERAMIC HEATER-ASSISTED DIESEL ENGINE USING BIODIESEL BLENDS WITH AGRICULTURAL WASTE SUGARCANE ETHANOL AND RUBBER SEED OIL ADDITIVE

    Article • Environmental Engineering and Management Journal, January 2026, OAIMDD - EcoZone Publishing House

    Dr KANTHAVELKUMARAN N, Dr Senthil Murugan S

  3. Influence of Surface Roughness on Fatigue Life of AISI D3 Component Hard Turned by CBN Insert under Dry Machining

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2025, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  4. Investigation of Single-Sided TIG Welding in Dissimilar AISI 316L and 304L Stainless Steel Joints

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2025, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  5. White Layer Suppression and Surface Integrity Enhancement in Hard Turning of AISI D3 Steel Using CBN Inserts under Dry and Gas Mixture Cooling

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2025, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  6. Impact of Rubber Seed Shell Charcoal on the Tribological and Mechanical Properties of Sustainable Magnesium Composites

    Article • National Academy Science Letters, December 2025, Springer Science + Business Media

    Dr Senthil Murugan S

  7. Influence of Tin addition on microstructure, mechanical, and tribological properties of magnesium matrix

    Article • China Foundry, November 2025, Springer Science + Business Media

    Dr Senthil Murugan S

  8. Investigation of the Effect of Nano-SiC Particle Addition on the Structural and Thermal Properties of PEEK-SiC Nano Composite Made by Melt Cast Process

    Article • National Academy Science Letters, October 2025, Springer Science + Business Media

    Dr Senthil Murugan S

  9. Effect of piezoelectric ceramic on natural frequency, structural, and thermal properties of additively manufactured PLA/BTO composite structure

    Article • Ceramics International, September 2025, Elsevier

    Dr Senthil Murugan S

  10. Effect of BTO piezoceramic on the mechanical and dielectric properties of 3D-printed PLA.BTO functional polymer composite

    Article • Emergent Materials, July 2025, Springer Science + Business Media

    Dr Senthil Murugan S

  11. Surface characteristics of 3D-printed PLA/BTO piezo-polymer composite

    Article • Progress in Additive Manufacturing, July 2025, Springer Science + Business Media

    Dr Senthil Murugan S

  12. Investigation of Dielectric Properties and Shore Hardness of 3D-Printed PLA Core Sandwich Disc with Functional Ceramics Surface Cladding

    Article • International Journal of Lightweight Materials and Manufacture, July 2025, Elsevier

    Dr Senthil Murugan S

  13. Experimental Investigation into Safe Distances for Enhancing Firefighter Safety in Photovoltaic Fire Suppression

    Article • National Academy Science Letters, April 2025, Springer Science + Business Media

    Dr Senthil Murugan S

  14. ANALYSIS OF DAMAGE IN LOW-VELOCITY IMPACT-TESTED GFRP-ALUMINUM HONEYCOMB SANDWICH PANELS USING MATLAB

    Article • Materiali in tehnologije, April 2025, Institute of Metals and Technology

    Dr KANTHAVELKUMARAN N, Dr. Jayaram RS, Dr Senthil Murugan S

  15. Development of Metal Matrix Composites Through Liquid State Technique

    Article • March 2025, Taylor & Francis

    Dr Senthil Murugan S

  16. A Review of Insights and Research Progress on Hard Turning

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2024, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  17. Multi-Response Optimization in AA6063/SS304 Bimetalic Friction Welding using Taguchi Grey Relational Analysis

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2024, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  18. Impact Energy Estimation of AISI304L/AA6063 Alloys Dissimilar Friction Welds Influenced by Various New Faying Surfaces: A Comparative Study

    Article • Journal of The Institution of Engineers (India) Series D, October 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  19. Welding and analysis of Hastelloy X alloy butt joint made by CO2 laser

    Article • Welding in the World, October 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  20. Development and analysis of Hastelloy-X alloy butt joint made by laser beam welding

    Article • Sadhana, September 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  21. Analysis of welding hazards from an occupational safety perspective

    Article • Ministry of Science and Technology Vietnam, September 2024, Vietnam Journal of Science Technology and Engineering

    Dr Senthil Murugan S

  22. Analysis of 3D-Printed Nylon/PETG Hybrid Polymer Laminate Plate for Wind Turbine Nacelle Application

    Article • National Academy Science Letters, September 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  23. Implementation Of I2C Protocol With Adaptive Baud Rate Using Verilog

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Senthil Murugan S

  24. Analysis of UNS S31603 ferrous joint made by rotary friction welding

    Article • Sadhana, April 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  25. Hard Turning of AISI D4 Steel Under Dry Machining and Gas Cooling Attempt is made for the Elimination of White Layer Also Enhancement of Surface Finish

    Article • National Academy Science Letters, February 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  26. Effect of innovative faying surfaces on dissimilar metal welds made with friction rotary joining

    Article • Welding in the World, January 2024, Springer Science + Business Media

    Dr Senthil Murugan S

  27. Navigating success: Unveiling the concept framework of “success-route” and its impact on achieving goals in career

    Article • BOHR International Journal of Social Science and Humanities Research, January 2024, BOHR Publishers

    Dr Senthil Murugan S

  28. A Review of Friction Welding Research Addressing the Influence, Development, Similar & Dissimilar Welding

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2023, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  29. Edge Detection and Defects Checking of Binder Clip and Welded Joint using a Python-Based Algorithm: Applications in Quality Inspection

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2023, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  30. Investigation of Nano SiO2 Filler Loading on Mechanical and Flammability Properties of Jute-Based Hybrid Polypropylene Composites

    Article • Silicon, July 2023, Springer Science + Business Media

    Dr Senthil Murugan S

  31. Evaluation of Mechanical and Microstructural Properties of High-Temperature Hastelloy X Alloy-Welded Joints Made by Laser Welding Process

    Article • Journal of Testing and Evaluation, June 2023, ASTM International

    Dr Senthil Murugan S

  32. Stir Casting Processing, Mechanical, and Wear Behavior of AA2024 +10 wt. % Flyash +5 wt. % Graphite Hybrid Composite

    Article • Advances in Materials Science and Engineering, February 2023, Hindawi Publishing Corporation

    Dr Senthil Murugan S

  33. An optimization study for preventing silica gelation and improving filtration effectiveness during pH reduction of high concentration silica solutions

    Article • The Canadian Journal of Chemical Engineering, January 2023, Wiley

    Dr Senthil Murugan S

  34. Human Factor Analysis of Textile Industry Workers Using Various Ergonomic Assessment Tools

    Article • Journal of The Institution of Engineers (India) Series E, January 2023, Springer Science + Business Media

    Dr Senthil Murugan S

  35. Review of Joining Various Materials by FSW Process and Applications

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2022, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S, Dr Suresh babu A

  36. Influence of Nano-Clay and Strain Rate on the In-Plane Compression Response of Nano-Clay/AA3003 Honeycomb Sandwich Panels

    Article • Journal of The Institution of Engineers (India) Series C, October 2022, Springer Science + Business Media

    Dr Senthil Murugan S, Dr. Jayaram RS

  37. Characterization of novel natural cellulosic fibers from Abutilon Indicum for potential reinforcement in polymer composites

    Article • Polymer Composites, October 2022, Wiley

    arunramnath r, Dr Senthil Murugan S

  38. Evaluation of Damage Area on Low-Velocity Impact Tested AA3003 Sandwich Panels Using Digital Image Analysis: A Novel Method

    Article • Journal of The Institution of Engineers (India) Series D, July 2022, Springer Science + Business Media

    Dr Senthil Murugan S, Dr. Jayaram RS

  39. NUMERICAL ANALYSIS OF THE EFFECT OF HEAT INPUT IN THE SPOT WELDING OF DISSIMILAR MATERIALS

    Article • Materiali in tehnologije, June 2022, Institute of Metals and Technology

    Dr Senthil Murugan S

  40. High velocity oxygen fuel coating for enhancing tribological behaviour of engineering metals

    Article • January 2022, American Institute of Physics

    Dr Senthil Murugan S

  41. Design and development of automated railway track cleaning machine

    Article • January 2022, American Institute of Physics

    Dr Senthil Murugan S, NAVEEN M K

  42. Design and analysis of the performance of scotch and yoke based two way pumping system

    Article • January 2022, American Institute of Physics

    Dr Senthil Murugan S

  43. Microstructural analysis of Al-SiC composites fabricated through centrifugal casting process

    Article • January 2022, American Institute of Physics

    Dr Senthil Murugan S

  44. Rotary Friction Welding and Dissimilar Metal Joining of Aluminium and Stainless Steel Alloys

    Article • Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, December 2021, Universitatea Dunarea de Jos din Galati

    Dr Senthil Murugan S

  45. Tensile and Microhardness Properties of Friction Welded Joints and Ranking the Experiments Using GRA and L9-Taguchi Hybrid Optimization

    Article • International Journal of Advanced Science and Engineering, November 2021, International Journal of Advanced Science and Engineering(IJASE)

    Dr Senthil Murugan S

  46. Effect of faying surfaces and characterization of aluminium AA6063–steel AISI304L dissimilar joints fabricated by friction welding with hemispherical bowl and threaded faying surfaces

    Article • The International Journal of Advanced Manufacturing Technology, June 2021, Springer Science + Business Media

    Dr Senthil Murugan S

  47. PROCESSING AND CHARACTERIZATION OF ECO-FRIENDLY CUTTING FLUID WITH NANO ADDITIVES FOR TURNING OPERATION

    Article • Surface Review and Letters, April 2021, World Scientific Pub Co Pte Lt

    Dr Senthil Murugan S

  48. MECHANICAL PROPERTIES ESTIMATION FROM TENSILE TESTING OF AA6063-AISI304L BIMETAL JOINTS FRICTION WELDED WITH DIFFERENT JOINING METHODS

    Article • Surface Review and Letters, February 2021, World Scientific Pub Co Pte Lt

    Dr Senthil Murugan S

  49. Continuous drive dissimilar friction welding of wrought aluminium AA6063-T6 and austenitic stainless steel AISI304L with different welding methods and welding trials

    Article • Kovove Materialy-Metallic Materials, January 2021, Central Library of the Slovak Academy of Sciences

    Dr Senthil Murugan S

  50. Continuous drive dissimilar friction welding of wrought aluminium AA6063-T6 and austenitic stainless steel AISI304L with different welding methods and welding trials

    Article • Kovove Materialy-Metallic Materials, January 2021, Central Library of the Slovak Academy of Sciences

    Dr Senthil Murugan S

  51. Computational investigations on helical heat flow exchanger in automotive radiator tubes with computational fluid dynamics

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Senthil Murugan S

  52. Design and analysis of two-cylinder exhaust manifold with improved performance in CFD

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Senthil Murugan S

  53. Electro spray technique to enhance the physical property of sulphur doped zinc oxide thin film

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Senthil Murugan S

  54. Characterization of Graphite-Reinforced LM30-Aluminium Matrix Composite Processed through Gravity and Vertical Centrifugal Casting Processes

    Article • Journal of The Institution of Engineers (India) Series D, November 2020, Springer Science + Business Media

    Dr Senthil Murugan S

  55. Electronic Gadget Detection Using Giant Magnetoresistive Sensor

    Article • International Journal of Advanced Science and Engineering, November 2020, International Journal of Advanced Science and Engineering(IJASE)

    Dr Senthil Murugan S

  56. Experimental study on the effect of silver, nickel and chromium interlayers and upset pressure in joining SS304L-AA6063 alloys through direct drive friction welding process

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, November 2020, Springer Science + Business Media

    Dr Senthil Murugan S

  57. Eco-Friendly Frictional Joining of AA6063 and AISI304L Dissimilar Metals and Characterisation of Bimetal Joints

    Article • Journal of New Materials for Electrochemical Systems, May 2020, Journal of New Materials for Electrochemical Systems

    Dr Senthil Murugan S

  58. Effect of welding parameters on the microstructure and mechanical properties of the friction-welded dissimilar joints of AA6063 alloy and faying surface-tapered AISI304L alloy

    Article • Welding in the World, January 2020, Springer Science + Business Media

    Dr Senthil Murugan S

  59. Analysis of plastic deformation of Al6063, Magnesium AZ91C and commercially used Titanium alloys using ECAP

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Senthil Murugan S

  60. The Effect of Different Nanofillers on the Morphology, Mechanical, Sorption and Thermal Properties of Polypropylene based Hybrid Composites

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Senthil Murugan S

  61. Hardness Property Measurement, Grain Size Reduction and Heat Treatment of AA6061+CuO Composite with and without TiB2 Addition

    Article • Revue des composites et des matériaux avancés, April 2019, International Information and Engineering Technology Association

    Dr Senthil Murugan S

  62. 3D Printing in Biomedical Applications

    Article • TECNICA ITALIANA-Italian Journal of Engineering Science, March 2019, International Information and Engineering Technology Association

    Dr Senthil Murugan S

  63. Development of ultra fine grained structure (UFG) on AA6061 and reinforced with CuO composite through equal channel angular pressing (ECAP) process

    Article • Revue des composites et des matériaux avancés, December 2018, International Information and Engineering Technology Association

    Dr Senthil Murugan S

  64. Processing and characterisation of LM30 alloy + graphite reinforced composite through gravity and centrifugal casting

    Article • European Journal of Control, December 2018, International Information and Engineering Technology Association

    Dr Senthil Murugan S

  65. Parameter optimization of micro ECDM process of borosilicate glass

    Article • Environmental and Earth Sciences Research Journal, June 2018, International Information and Engineering Technology Association

    Dr Senthil Murugan S

  66. Parameter Optimization and the Effect of Parameters on Mechanical Properties of Hybrid Composite

    Article • International Journal of Modern Studies in Mechanical Engineering, January 2018, ARC Publications Pvt Ltd.

    Dr Senthil Murugan S

  67. Bifurcation of brachial artery into a common radial–interosseous trunk and superficial ulnar artery: a rare variation

    Article • Anatomical Science International, December 2017, Springer Science + Business Media

    Dr Senthil Murugan S

  68. Mechanical Properties of SiC, Al2O3 Reinforced Aluminium 6061-T6 Hybrid Matrix Composite

    Article • Journal of The Institution of Engineers (India) Series D, June 2017, Springer Science + Business Media

    Dr Senthil Murugan S

  69. Association of high carotid bifurcation and thyrolinguofacial trunk: a rare variation

    Article • Anatomical Science International, May 2017, Springer Science + Business Media

    Dr Senthil Murugan S

  70. Tribological Wear Behaviour and Hardness Measurement of SiC, Al2O3 Reinforced Al. Matrix Hybrid Composite

    Article • Journal of The Institution of Engineers (India) Series D, January 2017, Springer Science + Business Media

    Dr Senthil Murugan S

  71. Development of Hybrid Composite for Automobile Application and its Structural Stability Analysis Using ANSYS

    Article • International Journal of Modern Studies in Mechanical Engineering, January 2017, ARC Publications Pvt Ltd.

    Dr Senthil Murugan S

  72. Equal Channel Angular Pressing: A Novel Technique for the Production of Ultra Fine Grained Structure in Materials– A Mini Review

    Article • International Journal of Modern Studies in Mechanical Engineering, January 2017, ARC Publications Pvt Ltd.

    Dr Senthil Murugan S

  73. Fabrication and Characterization of Al-SiCp-Fly Ash Composite using Stir Casting Process

    Article • Concurrent Advances in Mechanical Engineering, November 2015, Portico

    Dr Senthil Murugan S